1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-14 06:21:44 +00:00
MarlinFirmware/Marlin/src/pins/pins_RAMPS_FD_V1.h

163 lines
3.7 KiB
C
Raw Normal View History

2017-07-18 23:29:06 +00:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* RAMPS-FD
*
* No EEPROM
* Use 4k7 thermistor tables
*/
#ifndef __SAM3X8E__
#error "Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS-FD"
#endif
#define INVERTED_HEATER_PINS
#define INVERTED_BED_PINS
#define INVERTED_FAN_PINS
//
// Servos
//
#define SERVO0_PIN 7
#define SERVO1_PIN 6
#define SERVO2_PIN 5
#define SERVO3_PIN 3
//
// Limit Switches
//
#define X_MIN_PIN 22
#define X_MAX_PIN 30
#define Y_MIN_PIN 24
#define Y_MAX_PIN 38
#define Z_MIN_PIN 26
#define Z_MAX_PIN 34
//
// Steppers
//
#define X_STEP_PIN 63
#define X_DIR_PIN 62
#define X_ENABLE_PIN 48
2018-02-23 20:29:57 +00:00
#ifndef X_CS_PIN
2018-02-04 22:35:52 +00:00
#define X_CS_PIN 68
#endif
2017-07-18 23:29:06 +00:00
#define Y_STEP_PIN 65
#define Y_DIR_PIN 64
#define Y_ENABLE_PIN 46
2018-02-23 20:29:57 +00:00
#ifndef Y_CS_PIN
2018-02-04 22:35:52 +00:00
#define Y_CS_PIN 60
#endif
2017-07-18 23:29:06 +00:00
#define Z_STEP_PIN 67
#define Z_DIR_PIN 66
#define Z_ENABLE_PIN 44
2018-02-23 20:29:57 +00:00
#ifndef Z_CS_PIN
2018-02-04 22:35:52 +00:00
#define Z_CS_PIN 58
#endif
2017-07-18 23:29:06 +00:00
#define E0_STEP_PIN 36
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 42
2018-02-23 20:29:57 +00:00
#ifndef E0_CS_PIN
2018-02-04 22:35:52 +00:00
#define E0_CS_PIN 67
#endif
2017-07-18 23:29:06 +00:00
#define E1_STEP_PIN 43
#define E1_DIR_PIN 41
#define E1_ENABLE_PIN 39
2018-02-23 20:29:57 +00:00
#ifndef E1_CS_PIN
2018-02-04 22:35:52 +00:00
#define E1_CS_PIN 61
#endif
2017-07-18 23:29:06 +00:00
#define E2_STEP_PIN 32
#define E2_DIR_PIN 47
#define E2_ENABLE_PIN 45
2018-02-23 20:29:57 +00:00
#ifndef E2_CS_PIN
2018-02-04 22:35:52 +00:00
#define E2_CS_PIN 59
#endif
2017-07-18 23:29:06 +00:00
//
// Temperature Sensors
//
#define TEMP_0_PIN 1 // Analog Input
#define TEMP_1_PIN 2 // Analog Input
#define TEMP_2_PIN 3 // Analog Input
2018-01-01 22:11:56 +00:00
#define TEMP_3_PIN -1 // fewer compiler warnings
#define TEMP_4_PIN -1 // fewer compiler warnings
2017-07-18 23:29:06 +00:00
#define TEMP_BED_PIN 0 // Analog Input
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 53
2017-07-18 23:29:06 +00:00
#else
#define MAX6675_SS 49
2017-07-18 23:29:06 +00:00
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 10
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 8 // BED
#define FAN_PIN 12
#define CONTROLLER_FAN_PIN -1
//
// Misc. Functions
//
#define SDSS 4
#define LED_PIN 13
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
// ramps-fd lcd adaptor
2017-07-18 23:29:06 +00:00
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37
2017-07-18 23:29:06 +00:00
#define BTN_EN1 33
#define BTN_EN2 31
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#endif
2017-07-18 23:29:06 +00:00
#endif
#endif // ULTRA_LCD