MarlinFirmware/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

// NOTE - the HAL version of the rrd device uses a generic ST7920 device.  See the
// file u8g_dev_st7920_128x64_HAL.cpp for the HAL version.

#include "../../inc/MarlinConfig.h"
#include "../../HAL/shared/Delay.h"

#define ST7920_CLK_PIN  LCD_PINS_D4
#define ST7920_DAT_PIN  LCD_PINS_ENABLE
#define ST7920_CS_PIN   LCD_PINS_RS

//#define PAGE_HEIGHT 8   //128 byte framebuffer
#define PAGE_HEIGHT 16  //256 byte framebuffer
//#define PAGE_HEIGHT 32  //512 byte framebuffer

#define LCD_PIXEL_WIDTH 128
#define LCD_PIXEL_HEIGHT 64

#include <U8glib.h>

// If you want you can define your own set of delays in Configuration.h
//#define ST7920_DELAY_1 DELAY_NS(0)
//#define ST7920_DELAY_2 DELAY_NS(0)
//#define ST7920_DELAY_3 DELAY_NS(0)

#if F_CPU >= 20000000
  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
  #define CPU_ST7920_DELAY_3 DELAY_NS(50)
#elif MB(3DRAG, K8200, K8400, SILVER_GATE)
  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
  #define CPU_ST7920_DELAY_2 DELAY_NS(188)
  #define CPU_ST7920_DELAY_3 DELAY_NS(0)
#elif MB(MINIRAMBO, EINSY_RAMBO, EINSY_RETRO)
  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
  #define CPU_ST7920_DELAY_2 DELAY_NS(250)
  #define CPU_ST7920_DELAY_3 DELAY_NS(0)
#elif MB(RAMBO)
  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
  #define CPU_ST7920_DELAY_3 DELAY_NS(0)
#elif MB(BQ_ZUM_MEGA_3D)
  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
  #define CPU_ST7920_DELAY_3 DELAY_NS(189)
#elif defined(ARDUINO_ARCH_STM32)
  #define CPU_ST7920_DELAY_1 DELAY_NS(300)
  #define CPU_ST7920_DELAY_2 DELAY_NS(40)
  #define CPU_ST7920_DELAY_3 DELAY_NS(340)
#elif F_CPU == 16000000
  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
  #define CPU_ST7920_DELAY_3 DELAY_NS(63)
#else
  #error "No valid condition for delays in 'ultralcd_st7920_u8glib_rrd_AVR.h'"
#endif

void ST7920_SWSPI_SND_8BIT(uint8_t val);

#if DOGM_SPI_DELAY_US > 0
  #define U8G_DELAY() DELAY_US(DOGM_SPI_DELAY_US)
#else
  #define U8G_DELAY() DELAY_US(10)
#endif

#define ST7920_CS()              { WRITE(ST7920_CS_PIN,1); U8G_DELAY(); }
#define ST7920_NCS()             { WRITE(ST7920_CS_PIN,0); }
#define ST7920_SET_CMD()         { ST7920_SWSPI_SND_8BIT(0xF8); U8G_DELAY(); }
#define ST7920_SET_DAT()         { ST7920_SWSPI_SND_8BIT(0xFA); U8G_DELAY(); }
#define ST7920_WRITE_BYTE(a)     { ST7920_SWSPI_SND_8BIT((uint8_t)((a)&0xF0u)); ST7920_SWSPI_SND_8BIT((uint8_t)((a)<<4u)); U8G_DELAY(); }
#define ST7920_WRITE_BYTES(p,l)  { for (uint8_t i = l + 1; --i;) { ST7920_SWSPI_SND_8BIT(*p&0xF0); ST7920_SWSPI_SND_8BIT(*p<<4); p++; } U8G_DELAY(); }