3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-14 14:31:33 +00:00
Code Issues Releases Wiki Activity
894f5c24a8
MarlinFirmware/Marlin/src/lcd/menu/menu_temperature.cpp

443 lines
17 KiB
C++
Raw Normal View History

Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// Temperature Menu
//
#include "../../inc/MarlinConfigPre.h"
#if HAS_LCD_MENU
#include "menu.h"
#include "../../module/temperature.h"
LCD SD Card items near top when not using wheel (#12926)
2019-01-21 05:24:53 +00:00
#if FAN_COUNT > 1 || ENABLED(SINGLENOZZLE)
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#include "../../module/motion.h"
#endif
LCD SD Card items near top when not using wheel (#12926)
2019-01-21 05:24:53 +00:00
#if ENABLED(SINGLENOZZLE)
#include "../../module/tool_change.h"
#endif
Reorganize includes and declarations
2018-10-28 07:59:21 +00:00
// Initialized by settings.load()
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
int16_t MarlinUI::preheat_hotend_temp[2], MarlinUI::preheat_bed_temp[2];
uint8_t MarlinUI::preheat_fan_speed[2];
Reorganize includes and declarations
2018-10-28 07:59:21 +00:00
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
//
// "Temperature" submenu items
//
void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const uint8_t fan) {
Misc. improvements (#12747) * Make ExtUI respect MAXTEMP limits - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values. * Speed up USB init, add status - Speed up USB initialization - Show status message if init failed * Enable status messages for EXTENSIBLE_UI * Adjust max limit to MAX_TEMP - 15 * Misc. tweaks to formatting, const, etc.
2019-01-01 21:17:48 +00:00
if (temph > 0) thermalManager.setTargetHotend(MIN(heater_maxtemp[endnum] - 15, temph), endnum);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HAS_HEATED_BED
if (tempb >= 0) thermalManager.setTargetBed(tempb);
#else
UNUSED(tempb);
#endif
#if FAN_COUNT > 0
#if FAN_COUNT > 1
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)
2019-01-12 06:41:48 +00:00
thermalManager.set_fan_speed(active_extruder < FAN_COUNT ? active_extruder : 0, fan);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#else
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)
2019-01-12 06:41:48 +00:00
thermalManager.set_fan_speed(0, fan);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
#else
UNUSED(fan);
#endif
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
ui.return_to_status();
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
}
#if HOTENDS > 1
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e1_only() { _lcd_preheat(1, ui.preheat_hotend_temp[0], -1, ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e1_only() { _lcd_preheat(1, ui.preheat_hotend_temp[1], -1, ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HAS_HEATED_BED
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e1() { _lcd_preheat(1, ui.preheat_hotend_temp[0], ui.preheat_bed_temp[0], ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e1() { _lcd_preheat(1, ui.preheat_hotend_temp[1], ui.preheat_bed_temp[1], ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
#if HOTENDS > 2
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e2_only() { _lcd_preheat(2, ui.preheat_hotend_temp[0], -1, ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e2_only() { _lcd_preheat(2, ui.preheat_hotend_temp[1], -1, ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HAS_HEATED_BED
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e2() { _lcd_preheat(2, ui.preheat_hotend_temp[0], ui.preheat_bed_temp[0], ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e2() { _lcd_preheat(2, ui.preheat_hotend_temp[1], ui.preheat_bed_temp[1], ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
#if HOTENDS > 3
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e3_only() { _lcd_preheat(3, ui.preheat_hotend_temp[0], -1, ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e3_only() { _lcd_preheat(3, ui.preheat_hotend_temp[1], -1, ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HAS_HEATED_BED
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e3() { _lcd_preheat(3, ui.preheat_hotend_temp[0], ui.preheat_bed_temp[0], ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e3() { _lcd_preheat(3, ui.preheat_hotend_temp[1], ui.preheat_bed_temp[1], ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
#if HOTENDS > 4
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e4_only() { _lcd_preheat(4, ui.preheat_hotend_temp[0], -1, ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e4_only() { _lcd_preheat(4, ui.preheat_hotend_temp[1], -1, ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HAS_HEATED_BED
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e4() { _lcd_preheat(4, ui.preheat_hotend_temp[0], ui.preheat_bed_temp[0], ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e4() { _lcd_preheat(4, ui.preheat_hotend_temp[1], ui.preheat_bed_temp[1], ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
#if HOTENDS > 5
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e5_only() { _lcd_preheat(5, ui.preheat_hotend_temp[0], -1, ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e5_only() { _lcd_preheat(5, ui.preheat_hotend_temp[1], -1, ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HAS_HEATED_BED
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e5() { _lcd_preheat(5, ui.preheat_hotend_temp[0], ui.preheat_bed_temp[0], ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e5() { _lcd_preheat(5, ui.preheat_hotend_temp[1], ui.preheat_bed_temp[1], ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#if HAS_HEATED_BED
void lcd_preheat_m1_e0();
void lcd_preheat_m2_e0();
#else
void lcd_preheat_m1_e0_only();
void lcd_preheat_m2_e0_only();
#endif
void lcd_preheat_m1_all() {
#if HOTENDS > 1
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[0], 1);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 2
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[0], 2);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 3
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[0], 3);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 4
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[0], 4);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 5
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[0], 5);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATED_BED
lcd_preheat_m1_e0();
#else
lcd_preheat_m1_e0_only();
#endif
}
void lcd_preheat_m2_all() {
#if HOTENDS > 1
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[1], 1);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 2
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[1], 2);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 3
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[1], 3);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 4
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[1], 4);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 5
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
thermalManager.setTargetHotend(ui.preheat_hotend_temp[1], 5);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATED_BED
lcd_preheat_m2_e0();
#else
lcd_preheat_m2_e0_only();
#endif
}
#endif // HOTENDS > 1
#if HAS_TEMP_HOTEND || HAS_HEATED_BED
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e0_only() { _lcd_preheat(0, ui.preheat_hotend_temp[0], -1, ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e0_only() { _lcd_preheat(0, ui.preheat_hotend_temp[1], -1, ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HAS_HEATED_BED
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
void lcd_preheat_m1_e0() { _lcd_preheat(0, ui.preheat_hotend_temp[0], ui.preheat_bed_temp[0], ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_e0() { _lcd_preheat(0, ui.preheat_hotend_temp[1], ui.preheat_bed_temp[1], ui.preheat_fan_speed[1]); }
void lcd_preheat_m1_bedonly() { _lcd_preheat(0, 0, ui.preheat_bed_temp[0], ui.preheat_fan_speed[0]); }
void lcd_preheat_m2_bedonly() { _lcd_preheat(0, 0, ui.preheat_bed_temp[1], ui.preheat_fan_speed[1]); }
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
void menu_preheat_m1() {
START_MENU();
MENU_BACK(MSG_TEMPERATURE);
#if HOTENDS == 1
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0);
MENU_ITEM(function, MSG_PREHEAT_1_END, lcd_preheat_m1_e0_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only);
#endif
#elif HOTENDS > 1
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E1, lcd_preheat_m1_e0_only);
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E2, lcd_preheat_m1_e1_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0_only);
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1_only);
#endif
#if HOTENDS > 2
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E3, lcd_preheat_m1_e2_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2_only);
#endif
#if HOTENDS > 3
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E4, lcd_preheat_m1_e3_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3_only);
#endif
#if HOTENDS > 4
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E5, lcd_preheat_m1_e4_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4_only);
#endif
#if HOTENDS > 5
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H6, lcd_preheat_m1_e5);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E6, lcd_preheat_m1_e5_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H6, lcd_preheat_m1_e5_only);
#endif
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
MENU_ITEM(function, MSG_PREHEAT_1_ALL, lcd_preheat_m1_all);
#endif // HOTENDS > 1
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_1_BEDONLY, lcd_preheat_m1_bedonly);
#endif
END_MENU();
}
void menu_preheat_m2() {
START_MENU();
MENU_BACK(MSG_TEMPERATURE);
#if HOTENDS == 1
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0);
MENU_ITEM(function, MSG_PREHEAT_2_END, lcd_preheat_m2_e0_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
#endif
#elif HOTENDS > 1
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E1, lcd_preheat_m2_e0_only);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E2, lcd_preheat_m2_e1_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0_only);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1_only);
#endif
#if HOTENDS > 2
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E3, lcd_preheat_m2_e2_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2_only);
#endif
#if HOTENDS > 3
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E4, lcd_preheat_m2_e3_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3_only);
#endif
#if HOTENDS > 4
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E5, lcd_preheat_m2_e4_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4_only);
#endif
#if HOTENDS > 5
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E6, lcd_preheat_m2_e5_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5_only);
#endif
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
MENU_ITEM(function, MSG_PREHEAT_2_ALL, lcd_preheat_m2_all);
#endif // HOTENDS > 1
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_BEDONLY, lcd_preheat_m2_bedonly);
#endif
END_MENU();
}
void lcd_cooldown() {
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)
2019-01-12 06:41:48 +00:00
thermalManager.zero_fan_speeds();
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
thermalManager.disable_all_heaters();
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 18:16:24 +00:00
ui.return_to_status();
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
}
#endif // HAS_TEMP_HOTEND || HAS_HEATED_BED
Add laser control menu (#12883)
2019-01-21 05:41:47 +00:00
#if ENABLED(SPINDLE_LASER_ENABLE)
extern uint8_t spindle_laser_power;
bool spindle_laser_enabled();
void set_spindle_laser_enabled(const bool enabled);
#if ENABLED(SPINDLE_LASER_PWM)
void update_spindle_laser_power();
#endif
inline void _lcd_spindle_laser_off() { set_spindle_laser_enabled(false); }
inline void _lcd_spindle_laser_on(const bool is_M4) {
#if SPINDLE_DIR_CHANGE
set_spindle_direction(is_M4);
#endif
set_spindle_laser_enabled(true);
}
inline void _lcd_spindle_laser_on() { _lcd_spindle_laser_on(false); }
#if SPINDLE_DIR_CHANGE
inline void _lcd_spindle_on_reverse() { _lcd_spindle_laser_on(true); }
#endif
void menu_spindle_laser() {
START_MENU();
MENU_BACK(MSG_MAIN);
if (spindle_laser_enabled()) {
#if ENABLED(SPINDLE_LASER_PWM)
MENU_ITEM_EDIT_CALLBACK(int3, MSG_LASER_POWER, &spindle_laser_power, SPEED_POWER_MIN, SPEED_POWER_MAX, update_spindle_laser_power);
#endif
MENU_ITEM(function, MSG_LASER_OFF, _lcd_spindle_laser_off);
}
else {
MENU_ITEM(function, MSG_LASER_ON, _lcd_spindle_laser_on);
#if SPINDLE_DIR_CHANGE
MENU_ITEM(function, MSG_SPINDLE_REVERSE, _lcd_spindle_on_reverse);
#endif
}
END_MENU();
}
#endif // SPINDLE_LASER_ENABLE
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
void menu_temperature() {
START_MENU();
MENU_BACK(MSG_MAIN);
//
// Nozzle:
// Nozzle [1-5]:
//
#if HOTENDS == 1
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
#else // HOTENDS > 1
Tweak / reduce menu items
2018-11-03 06:15:02 +00:00
#define EDIT_TARGET(N) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_LCD_N##N, &thermalManager.target_temperature[N], 0, HEATER_##N##_MAXTEMP - 15, watch_temp_callback_E##N)
EDIT_TARGET(0);
EDIT_TARGET(1);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 2
Tweak / reduce menu items
2018-11-03 06:15:02 +00:00
EDIT_TARGET(2);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 3
Tweak / reduce menu items
2018-11-03 06:15:02 +00:00
EDIT_TARGET(3);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 4
Tweak / reduce menu items
2018-11-03 06:15:02 +00:00
EDIT_TARGET(4);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if HOTENDS > 5
Tweak / reduce menu items
2018-11-03 06:15:02 +00:00
EDIT_TARGET(5);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
LCD SD Card items near top when not using wheel (#12926)
2019-01-21 05:24:53 +00:00
#if ENABLED(SINGLENOZZLE)
MENU_MULTIPLIER_ITEM_EDIT(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15);
#endif
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
//
// Bed:
//
#if HAS_HEATED_BED
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_BED, &thermalManager.target_temperature_bed, 0, BED_MAXTEMP - 15, watch_temp_callback_bed);
#endif
//
// Fan Speed:
//
#if FAN_COUNT > 0
#if HAS_FAN0
Rename LCD menus according to variable types (#12892)
2019-01-12 22:01:04 +00:00
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(uint8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if ENABLED(EXTRA_FAN_SPEED)
Rename LCD menus according to variable types (#12892)
2019-01-12 22:01:04 +00:00
MENU_MULTIPLIER_ITEM_EDIT(uint8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
#endif
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)
2019-01-12 06:41:48 +00:00
#if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1)
Rename LCD menus according to variable types (#12892)
2019-01-12 22:01:04 +00:00
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(uint8, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if ENABLED(EXTRA_FAN_SPEED)
Rename LCD menus according to variable types (#12892)
2019-01-12 22:01:04 +00:00
MENU_MULTIPLIER_ITEM_EDIT(uint8, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
#endif
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)
2019-01-12 06:41:48 +00:00
#if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2)
Rename LCD menus according to variable types (#12892)
2019-01-12 22:01:04 +00:00
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(uint8, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#if ENABLED(EXTRA_FAN_SPEED)
Rename LCD menus according to variable types (#12892)
2019-01-12 22:01:04 +00:00
MENU_MULTIPLIER_ITEM_EDIT(uint8, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255);
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
#endif
#endif
#endif // FAN_COUNT > 0
#if HAS_TEMP_HOTEND
//
// Cooldown
//
bool has_heat = false;
HOTEND_LOOP() if (thermalManager.target_temperature[HOTEND_INDEX]) { has_heat = true; break; }
#if HAS_TEMP_BED
if (thermalManager.target_temperature_bed) has_heat = true;
#endif
if (has_heat) MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
//
// Preheat for Material 1 and 2
//
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || HAS_HEATED_BED
MENU_ITEM(submenu, MSG_PREHEAT_1, menu_preheat_m1);
MENU_ITEM(submenu, MSG_PREHEAT_2, menu_preheat_m2);
#else
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only);
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
#endif
#endif // HAS_TEMP_HOTEND
Add laser control menu (#12883)
2019-01-21 05:41:47 +00:00
#if ENABLED(SPINDLE_LASER_ENABLE)
MENU_ITEM(submenu, MSG_LASER_MENU, menu_spindle_laser);
#endif
Move Temperature Menu to its own file
2018-10-27 23:30:37 +00:00
END_MENU();
}
#endif // HAS_LCD_MENU
Reference in New Issue Copy Permalink