MarlinFirmware/Marlin/src/lcd/dogm/ultralcd_DOGM.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * ultralcd_DOGM.h
 */

#include "../../inc/MarlinConfigPre.h"

#include <U8glib.h>
#include "HAL_LCD_class_defines.h"

// LCD selection
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
  #define U8G_CLASS U8GLIB_ST7920_128X64_4X
  #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN)
    #define U8G_PARAM LCD_PINS_RS
  #else
    #define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS
  #endif

#elif ENABLED(U8GLIB_ST7920)
  // RepRap Discount Full Graphics Smart Controller
  #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN)
    #define U8G_CLASS U8GLIB_ST7920_128X64_4X_HAL
    #define U8G_PARAM LCD_PINS_RS // 2 stripes, HW SPI (shared with SD card, on AVR does not use standard LCD adapter)
  #else
    //#define U8G_CLASS U8GLIB_ST7920_128X64_4X
    //#define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS     // Original u8glib device. 2 stripes, SW SPI
    #define U8G_CLASS U8GLIB_ST7920_128X64_RRD
    #define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS       // Number of stripes can be adjusted in ultralcd_st7920_u8glib_rrd.h with PAGE_HEIGHT
                                                                      // AVR version ignores these pin settings
                                                                      // HAL version uses these pin settings
  #endif

#elif ENABLED(CARTESIO_UI)
  // The CartesioUI display
  //#define U8G_CLASS U8GLIB_DOGM128_2X
  //#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0   // 4 stripes
  #define U8G_CLASS U8GLIB_DOGM128_2X
  #define U8G_PARAM DOGLCD_CS, DOGLCD_A0                              // 4 stripes

#elif ENABLED(U8GLIB_LM6059_AF)
  // Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
  //#define U8G_CLASS U8GLIB_LM6059
  //#define U8G_PARAM DOGLCD_CS, DOGLCD_A0                            // 8 stripes
  #define U8G_CLASS U8GLIB_LM6059_2X
  #define U8G_PARAM DOGLCD_CS, DOGLCD_A0                              // 4 stripes

#elif ENABLED(U8GLIB_ST7565_64128N)
  // The MaKrPanel, Mini Viki, Viki 2.0 & AZSMZ 12864 ST7565 controller
  #define SMART_RAMPS (MB(RAMPS_SMART_EFB) || MB(RAMPS_SMART_EEB) || MB(RAMPS_SMART_EFF) || MB(RAMPS_SMART_EEF) || MB(RAMPS_SMART_SF))
  #if DOGLCD_SCK == SCK_PIN && DOGLCD_MOSI == MOSI_PIN && !SMART_RAMPS
    #define U8G_CLASS U8GLIB_64128N_2X_HAL
    #define U8G_PARAM DOGLCD_CS, DOGLCD_A0                            // using HW-SPI
  #else
    #define U8G_CLASS U8GLIB_64128N_2X_HAL
    #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0   // using SW-SPI
  #endif

#elif ENABLED(MKS_12864OLED_SSD1306)
  // MKS 128x64 (SSD1306) OLED I2C LCD
  #define U8G_CLASS U8GLIB_SSD1306_128X64
  #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0     // 8 stripes
  //#define U8G_CLASS U8GLIB_SSD1306_128X64_2X
  //#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0   // 4 stripes

#elif ENABLED(U8GLIB_SSD1306)
  // Generic support for SSD1306 OLED I2C LCDs
  //#define U8G_CLASS U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE
  //#define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)           // 4 stripes
  #define U8G_CLASS U8GLIB_SSD1306_128X64_2X
  #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)             // 4 stripes

#elif ENABLED(MKS_12864OLED)
  // MKS 128x64 (SH1106) OLED I2C LCD
  #define U8G_CLASS U8GLIB_SH1106_128X64
  #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0     // 8 stripes
  //#define U8G_CLASS U8GLIB_SH1106_128X64_2X
  //#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0   // 4 stripes
#elif ENABLED(U8GLIB_SH1106)
  // Generic support for SH1106 OLED I2C LCDs
  //#define U8G_CLASS U8GLIB_SH1106_128X64_2X_I2C_2_WIRE
  //#define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)           // 4 stripes
  #define U8G_CLASS U8GLIB_SH1106_128X64_2X
  #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)             // 4 stripes
#elif ENABLED(U8GLIB_SSD1309)
  // Generic support for SSD1309 OLED I2C LCDs
  #define U8G_CLASS U8GLIB_SSD1309_128X64
  #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)
#elif ENABLED(MINIPANEL)
  // The MINIPanel display
  //#define U8G_CLASS U8GLIB_MINI12864
  //#define U8G_PARAM DOGLCD_CS, DOGLCD_A0                            // 8 stripes
  #define U8G_CLASS U8GLIB_MINI12864_2X
  #define U8G_PARAM DOGLCD_CS, DOGLCD_A0                              // 4 stripes
#elif ENABLED(U8GLIB_SH1106_EINSTART)
  // Connected via motherboard header
  #define U8G_CLASS U8GLIB_SH1106_128X64
  #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS
#else
  // for regular DOGM128 display with HW-SPI
  //#define U8G_CLASS U8GLIB_DOGM128
  //#define U8G_PARAM DOGLCD_CS, DOGLCD_A0                            // HW-SPI Com: CS, A0  // 8 stripes
  #define U8G_CLASS U8GLIB_DOGM128_2X
  #define U8G_PARAM DOGLCD_CS, DOGLCD_A0                              // HW-SPI Com: CS, A0 // 4 stripes
#endif

#ifndef LCD_PIXEL_WIDTH
  #define LCD_PIXEL_WIDTH 128
#endif
#ifndef LCD_PIXEL_HEIGHT
  #define LCD_PIXEL_HEIGHT 64
#endif

// For selective rendering within a Y range
#define PAGE_UNDER(yb) (u8g.getU8g()->current_page.y0 <= (yb))
#define PAGE_CONTAINS(ya, yb) (PAGE_UNDER(yb) && u8g.getU8g()->current_page.y1 >= (ya))

// Only Western languages support big / small fonts
#if DISABLED(DISPLAY_CHARSET_ISO10646_1)
  #undef USE_BIG_EDIT_FONT
  #undef USE_SMALL_INFOFONT
#endif

#define MENU_FONT_NAME    ISO10646_1_5x7
#define MENU_FONT_WIDTH    6
#define MENU_FONT_ASCENT  10
#define MENU_FONT_DESCENT  2
#define MENU_FONT_HEIGHT  (MENU_FONT_ASCENT + MENU_FONT_DESCENT)

#if ENABLED(USE_BIG_EDIT_FONT)
  #define EDIT_FONT_NAME    u8g_font_9x18
  #define EDIT_FONT_WIDTH    9
  #define EDIT_FONT_ASCENT  10
  #define EDIT_FONT_DESCENT  3
#else
  #define EDIT_FONT_NAME    MENU_FONT_NAME
  #define EDIT_FONT_WIDTH   MENU_FONT_WIDTH
  #define EDIT_FONT_ASCENT  MENU_FONT_ASCENT
  #define EDIT_FONT_DESCENT MENU_FONT_DESCENT
#endif
#define EDIT_FONT_HEIGHT (EDIT_FONT_ASCENT + EDIT_FONT_DESCENT)

// Get the Ascent, Descent, and total Height for the Info Screen font
#if ENABLED(USE_SMALL_INFOFONT)
  extern const u8g_fntpgm_uint8_t u8g_font_6x9[];
  #define INFO_FONT_ASCENT 7
#else
  #define INFO_FONT_ASCENT 8
#endif
#define INFO_FONT_DESCENT 2
#define INFO_FONT_HEIGHT (INFO_FONT_ASCENT + INFO_FONT_DESCENT)
#define INFO_FONT_WIDTH   6

extern U8G_CLASS u8g;