1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-05 02:19:14 +00:00
MarlinFirmware/Marlin/src/pins/mega/pins_EINSTART-S.h

114 lines
2.7 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2019-06-28 04:57:50 +00:00
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-06-28 04:57:50 +00:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2019-07-05 03:44:12 +00:00
#pragma once
/**
2018-11-14 06:23:18 +00:00
* Einstart-S pin assignments
* PCB Silkscreen: 3DPrinterCon_v3.5
*/
2019-07-11 07:32:24 +00:00
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
2019-08-21 00:08:58 +00:00
#define BOARD_INFO_NAME "Einstart-S"
//
// Limit Switches
//
2019-06-13 08:21:18 +00:00
#define X_STOP_PIN 44
#define Y_STOP_PIN 43
#define Z_STOP_PIN 42
//
// Steppers
//
2019-06-13 08:21:18 +00:00
#define X_STEP_PIN 76
#define X_DIR_PIN 75
#define X_ENABLE_PIN 73
2019-06-13 08:21:18 +00:00
#define Y_STEP_PIN 31
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN 72
2019-06-13 08:21:18 +00:00
#define Z_STEP_PIN 34
#define Z_DIR_PIN 35
#define Z_ENABLE_PIN 33
2019-06-13 08:21:18 +00:00
#define E0_STEP_PIN 36
#define E0_DIR_PIN 37
#define E0_ENABLE_PIN 30
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_BED_PIN 1 // Analog Input
//
// Heaters / Fans
//
2019-06-13 08:21:18 +00:00
#define HEATER_0_PIN 83
#define HEATER_BED_PIN 38
2019-06-13 08:21:18 +00:00
#define FAN_PIN 82
//
// Misc. Functions
//
2019-06-13 08:21:18 +00:00
#define SDSS 53
#define LED_PIN 4
//////////////////////////
// LCDs and Controllers //
//////////////////////////
//
// LCD Display output pins
//
// Requires #define U8GLIB_SH1106_EINSTART in Configuration.h
// u8glib constructor
// U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS);
2019-06-13 08:21:18 +00:00
#define LCD_PINS_DC 78
#define LCD_PINS_RS 79
// DOGM SPI LCD Support
2019-06-13 08:21:18 +00:00
#define DOGLCD_CS 3
#define DOGLCD_MOSI 2
#define DOGLCD_SCK 5
#define DOGLCD_A0 2
//
// LCD Display input pins
//
2019-06-13 08:21:18 +00:00
#define BTN_UP 25
#define BTN_DWN 26
#define BTN_LFT 27
#define BTN_RT 28
// 'OK' button
2019-06-13 08:21:18 +00:00
#define BTN_ENC 29
// Set Kill to right arrow, same as RIGID_PANEL
2019-06-13 08:21:18 +00:00
#define KILL_PIN 28