3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-24 20:43:32 +00:00
Code Issues Releases Wiki Activity
b45a277c52
MarlinFirmware/Marlin/pinsDebug_list.h

932 lines
26 KiB
C
Raw Normal View History

pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
Remove things that aren't pins from pinsDebug_list.h
2017-05-01 03:24:51 +00:00
// Please update this list when adding new pins to Marlin.
// The order doesn't matter.
// Following this pattern is a must.
// If the new pin name is over 28 characters long then pinsDebug.h will need to be modified.
// Pin list updated from 18 FEB 2017 RCBugfix branch - max length of pin name is 24
#line 0 // set __LINE__ to a known value for both passes
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
Add Skynet/ANET A10 support
2017-06-10 05:12:18 +00:00
#if PIN_EXISTS(ADC_KEYPAD) && ADC_KEYPAD_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(ADC_KEYPAD_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if defined(__FD) && __FD >= 0
REPORT_NAME_DIGITAL(__FD, __LINE__ )
#endif
#if defined(__FS) && __FS >= 0
REPORT_NAME_DIGITAL(__FS, __LINE__ )
#endif
#if defined(__GD) && __GD >= 0
REPORT_NAME_DIGITAL(__GD, __LINE__ )
#endif
#if defined(__GS) && __GS >= 0
REPORT_NAME_DIGITAL(__GS, __LINE__ )
#endif
fix pinsDebug.h error, add capability to display more than 70 pins.
2017-06-11 02:49:13 +00:00
#if PIN_EXISTS(ADC_KEYPAD)
REPORT_NAME_ANALOG(ADC_KEYPAD_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(AVR_MISO)
REPORT_NAME_DIGITAL(AVR_MISO_PIN, __LINE__ )
#endif
#if PIN_EXISTS(AVR_MOSI)
REPORT_NAME_DIGITAL(AVR_MOSI_PIN, __LINE__ )
#endif
#if PIN_EXISTS(AVR_SCK)
REPORT_NAME_DIGITAL(AVR_SCK_PIN, __LINE__ )
#endif
#if PIN_EXISTS(AVR_SS)
REPORT_NAME_DIGITAL(AVR_SS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(BEEPER)
REPORT_NAME_DIGITAL(BEEPER_PIN, __LINE__ )
#endif
#if defined(BTN_CENTER) && BTN_CENTER >= 0
REPORT_NAME_DIGITAL(BTN_CENTER, __LINE__ )
#endif
#if defined(BTN_DOWN) && BTN_DOWN >= 0
REPORT_NAME_DIGITAL(BTN_DOWN, __LINE__ )
#endif
#if defined(BTN_DWN) && BTN_DWN >= 0
REPORT_NAME_DIGITAL(BTN_DWN, __LINE__ )
#endif
#if defined(BTN_EN1) && BTN_EN1 >= 0
REPORT_NAME_DIGITAL(BTN_EN1, __LINE__ )
#endif
#if defined(BTN_EN2) && BTN_EN2 >= 0
REPORT_NAME_DIGITAL(BTN_EN2, __LINE__ )
#endif
#if defined(BTN_ENC) && BTN_ENC >= 0
REPORT_NAME_DIGITAL(BTN_ENC, __LINE__ )
#endif
#if defined(BTN_HOME) && BTN_HOME >= 0
REPORT_NAME_DIGITAL(BTN_HOME, __LINE__ )
#endif
#if defined(BTN_LEFT) && BTN_LEFT >= 0
REPORT_NAME_DIGITAL(BTN_LEFT, __LINE__ )
#endif
#if defined(BTN_LFT) && BTN_LFT >= 0
REPORT_NAME_DIGITAL(BTN_LFT, __LINE__ )
#endif
#if defined(BTN_RIGHT) && BTN_RIGHT >= 0
REPORT_NAME_DIGITAL(BTN_RIGHT, __LINE__ )
#endif
#if defined(BTN_RT) && BTN_RT >= 0
REPORT_NAME_DIGITAL(BTN_RT, __LINE__ )
#endif
#if defined(BTN_UP) && BTN_UP >= 0
REPORT_NAME_DIGITAL(BTN_UP, __LINE__ )
#endif
#if PIN_EXISTS(CASE_LIGHT)
REPORT_NAME_DIGITAL(CASE_LIGHT_PIN, __LINE__ )
#endif
Implement USE_CONTROLLER_FAN as a feature
2017-05-03 01:18:31 +00:00
#if PIN_EXISTS(CONTROLLER_FAN)
REPORT_NAME_DIGITAL(CONTROLLER_FAN_PIN, __LINE__ )
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#endif
#if PIN_EXISTS(CUTOFF_RESET)
REPORT_NAME_DIGITAL(CUTOFF_RESET_PIN, __LINE__ )
#endif
#if PIN_EXISTS(CUTOFF_TEST)
REPORT_NAME_DIGITAL(CUTOFF_TEST_PIN, __LINE__ )
#endif
#if PIN_EXISTS(DAC_DISABLE)
REPORT_NAME_DIGITAL(DAC_DISABLE_PIN, __LINE__ )
#endif
#if defined(DAC_STEPPER_VREF) && DAC_STEPPER_VREF >= 0
REPORT_NAME_DIGITAL(DAC_STEPPER_VREF, __LINE__ )
#endif
#if PIN_EXISTS(DEBUG)
REPORT_NAME_DIGITAL(DEBUG_PIN, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SCL) && DIGIPOTS_I2C_SCL >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SCL, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_E0) && DIGIPOTS_I2C_SDA_E0 >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_E0, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_E1) && DIGIPOTS_I2C_SDA_E1 >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_E1, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_X) && DIGIPOTS_I2C_SDA_X >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_X, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_Y) && DIGIPOTS_I2C_SDA_Y >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_Y, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_Z) && DIGIPOTS_I2C_SDA_Z >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_Z, __LINE__ )
#endif
#if PIN_EXISTS(DIGIPOTSS)
REPORT_NAME_DIGITAL(DIGIPOTSS_PIN, __LINE__ )
#endif
#if defined(DOGLCD_A0) && DOGLCD_A0 >= 0
REPORT_NAME_DIGITAL(DOGLCD_A0, __LINE__ )
#endif
#if defined(DOGLCD_CS) && DOGLCD_CS >= 0
REPORT_NAME_DIGITAL(DOGLCD_CS, __LINE__ )
#endif
#if defined(DOGLCD_MOSI) && DOGLCD_MOSI >= 0
REPORT_NAME_DIGITAL(DOGLCD_MOSI, __LINE__ )
#endif
#if defined(DOGLCD_SCK) && DOGLCD_SCK >= 0
REPORT_NAME_DIGITAL(DOGLCD_SCK, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(E_MUX0)
REPORT_NAME_DIGITAL(E_MUX0_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E_MUX1)
REPORT_NAME_DIGITAL(E_MUX1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E_MUX2)
REPORT_NAME_DIGITAL(E_MUX2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E_STOP)
REPORT_NAME_DIGITAL(E_STOP_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(E0_ATT)
REPORT_NAME_DIGITAL(E0_ATT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_AUTO_FAN)
REPORT_NAME_DIGITAL(E0_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_CS)
REPORT_NAME_DIGITAL(E0_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_DIR)
REPORT_NAME_DIGITAL(E0_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_ENABLE)
REPORT_NAME_DIGITAL(E0_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_MS1)
REPORT_NAME_DIGITAL(E0_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_MS2)
REPORT_NAME_DIGITAL(E0_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_STEP)
REPORT_NAME_DIGITAL(E0_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_AUTO_FAN)
REPORT_NAME_DIGITAL(E1_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_CS)
REPORT_NAME_DIGITAL(E1_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_DIR)
REPORT_NAME_DIGITAL(E1_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_ENABLE)
REPORT_NAME_DIGITAL(E1_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_MS1)
REPORT_NAME_DIGITAL(E1_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_MS2)
REPORT_NAME_DIGITAL(E1_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_STEP)
REPORT_NAME_DIGITAL(E1_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E2_AUTO_FAN)
REPORT_NAME_DIGITAL(E2_AUTO_FAN_PIN, __LINE__ )
#endif
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#if PIN_EXISTS(E2_CS)
REPORT_NAME_DIGITAL(E2_CS_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(E2_DIR)
REPORT_NAME_DIGITAL(E2_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E2_ENABLE)
REPORT_NAME_DIGITAL(E2_ENABLE_PIN, __LINE__ )
#endif
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#if PIN_EXISTS(E2_MS1)
REPORT_NAME_DIGITAL(E2_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E2_MS2)
REPORT_NAME_DIGITAL(E2_MS2_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(E2_STEP)
REPORT_NAME_DIGITAL(E2_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E3_AUTO_FAN)
REPORT_NAME_DIGITAL(E3_AUTO_FAN_PIN, __LINE__ )
#endif
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#if PIN_EXISTS(E3_CS)
REPORT_NAME_DIGITAL(E3_CS_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(E3_DIR)
REPORT_NAME_DIGITAL(E3_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E3_ENABLE)
REPORT_NAME_DIGITAL(E3_ENABLE_PIN, __LINE__ )
#endif
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#if PIN_EXISTS(E3_MS1)
REPORT_NAME_DIGITAL(E3_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E3_MS2)
REPORT_NAME_DIGITAL(E3_MS2_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(E3_MS3)
REPORT_NAME_DIGITAL(E3_MS3_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(E3_STEP)
REPORT_NAME_DIGITAL(E3_STEP_PIN, __LINE__ )
#endif
Updates to support 5 extruders
2017-04-09 08:23:05 +00:00
#if PIN_EXISTS(E4_AUTO_FAN)
REPORT_NAME_DIGITAL(E4_AUTO_FAN_PIN, __LINE__ )
#endif
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#if PIN_EXISTS(E4_CS)
REPORT_NAME_DIGITAL(E4_CS_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(E4_DIR)
REPORT_NAME_DIGITAL(E4_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E4_ENABLE)
REPORT_NAME_DIGITAL(E4_ENABLE_PIN, __LINE__ )
#endif
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#if PIN_EXISTS(E4_MS1)
REPORT_NAME_DIGITAL(E4_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E4_MS2)
REPORT_NAME_DIGITAL(E4_MS2_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(E4_MS3)
REPORT_NAME_DIGITAL(E4_MS3_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(E4_STEP)
REPORT_NAME_DIGITAL(E4_STEP_PIN, __LINE__ )
#endif
#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A0, __LINE__ )
#endif
#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A0, __LINE__ )
#endif
#if defined(EXT_AUX_A0_IO) && EXT_AUX_A0_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A0_IO, __LINE__ )
#endif
#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A1, __LINE__ )
#endif
#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A1, __LINE__ )
#endif
#if defined(EXT_AUX_A1_IO) && EXT_AUX_A1_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A1_IO, __LINE__ )
#endif
#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A2, __LINE__ )
#endif
#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A2, __LINE__ )
#endif
#if defined(EXT_AUX_A2_IO) && EXT_AUX_A2_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A2_IO, __LINE__ )
#endif
#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A3, __LINE__ )
#endif
#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A3, __LINE__ )
#endif
#if defined(EXT_AUX_A3_IO) && EXT_AUX_A3_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A3_IO, __LINE__ )
#endif
#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A4, __LINE__ )
#endif
#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A4, __LINE__ )
#endif
#if defined(EXT_AUX_A4_IO) && EXT_AUX_A4_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A4_IO, __LINE__ )
#endif
#if defined(EXT_AUX_PWM_D24) && EXT_AUX_PWM_D24 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_PWM_D24, __LINE__ )
#endif
#if defined(EXT_AUX_RX1_D2) && EXT_AUX_RX1_D2 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_RX1_D2, __LINE__ )
#endif
#if defined(EXT_AUX_SCL_D0) && EXT_AUX_SCL_D0 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_SCL_D0, __LINE__ )
#endif
#if defined(EXT_AUX_SDA_D1) && EXT_AUX_SDA_D1 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_SDA_D1, __LINE__ )
#endif
#if defined(EXT_AUX_TX1_D3) && EXT_AUX_TX1_D3 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_TX1_D3, __LINE__ )
#endif
#if defined(EXTRUDER_0_AUTO_FAN) && EXTRUDER_0_AUTO_FAN >= 0
REPORT_NAME_DIGITAL(EXTRUDER_0_AUTO_FAN, __LINE__ )
#endif
#if defined(EXTRUDER_1_AUTO_FAN) && EXTRUDER_1_AUTO_FAN >= 0
REPORT_NAME_DIGITAL(EXTRUDER_1_AUTO_FAN, __LINE__ )
#endif
#if PIN_EXISTS(FAN)
REPORT_NAME_DIGITAL(FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(FAN1)
REPORT_NAME_DIGITAL(FAN1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(FAN2)
REPORT_NAME_DIGITAL(FAN2_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(FAN3)
REPORT_NAME_DIGITAL(FAN3_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(FIL_RUNOUT)
REPORT_NAME_DIGITAL(FIL_RUNOUT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(FILWIDTH_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_0)
REPORT_NAME_DIGITAL(HEATER_0_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_1)
REPORT_NAME_DIGITAL(HEATER_1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_2)
REPORT_NAME_DIGITAL(HEATER_2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_3)
REPORT_NAME_DIGITAL(HEATER_3_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_4)
REPORT_NAME_DIGITAL(HEATER_4_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_5)
REPORT_NAME_DIGITAL(HEATER_5_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_6)
REPORT_NAME_DIGITAL(HEATER_6_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_7)
REPORT_NAME_DIGITAL(HEATER_7_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_BED)
REPORT_NAME_DIGITAL(HEATER_BED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HOME)
REPORT_NAME_DIGITAL(HOME_PIN, __LINE__ )
#endif
Rename some (unused) OMCA pins
2017-05-01 03:16:44 +00:00
#if PIN_EXISTS(I2C_SCL)
REPORT_NAME_DIGITAL(I2C_SCL_PIN, __LINE__ )
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#endif
Rename some (unused) OMCA pins
2017-05-01 03:16:44 +00:00
#if PIN_EXISTS(I2C_SDA)
REPORT_NAME_DIGITAL(I2C_SDA_PIN, __LINE__ )
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#endif
#if PIN_EXISTS(KILL)
REPORT_NAME_DIGITAL(KILL_PIN, __LINE__ )
#endif
#if PIN_EXISTS(LCD_BACKLIGHT)
REPORT_NAME_DIGITAL(LCD_BACKLIGHT_PIN, __LINE__ )
#endif
#if defined(LCD_CONTRAST) && LCD_CONTRAST >= 0
REPORT_NAME_DIGITAL(LCD_CONTRAST, __LINE__ )
#endif
Unify AVR90USB: pinsDebug changes
2017-06-08 23:08:30 +00:00
#if defined(LCD_PINS_D4) && LCD_PINS_D4 >= 0
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
REPORT_NAME_DIGITAL(LCD_PINS_D4, __LINE__ )
#endif
Unify AVR90USB: pinsDebug changes
2017-06-08 23:08:30 +00:00
#if defined(LCD_PINS_D5) && LCD_PINS_D5 >= 0
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
REPORT_NAME_DIGITAL(LCD_PINS_D5, __LINE__ )
#endif
Unify AVR90USB: pinsDebug changes
2017-06-08 23:08:30 +00:00
#if defined(LCD_PINS_D6) && LCD_PINS_D6 >= 0
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
REPORT_NAME_DIGITAL(LCD_PINS_D6, __LINE__ )
#endif
Unify AVR90USB: pinsDebug changes
2017-06-08 23:08:30 +00:00
#if defined(LCD_PINS_D7) && LCD_PINS_D7 >= 0
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
REPORT_NAME_DIGITAL(LCD_PINS_D7, __LINE__ )
#endif
Unify AVR90USB: pinsDebug changes
2017-06-08 23:08:30 +00:00
#if defined(LCD_PINS_ENABLE) && LCD_PINS_ENABLE >= 0
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
REPORT_NAME_DIGITAL(LCD_PINS_ENABLE, __LINE__ )
#endif
Unify AVR90USB: pinsDebug changes
2017-06-08 23:08:30 +00:00
#if defined(LCD_PINS_RS) && LCD_PINS_RS >= 0
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
REPORT_NAME_DIGITAL(LCD_PINS_RS, __LINE__ )
#endif
#if defined(LCD_SDSS) && LCD_SDSS >= 0
REPORT_NAME_DIGITAL(LCD_SDSS, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(LED_GREEN)
REPORT_NAME_DIGITAL(LED_GREEN_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(LED)
REPORT_NAME_DIGITAL(LED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(MAIN_VOLTAGE_MEASURE_PIN, __LINE__ )
#endif
#if defined(MAX6675_SS) && MAX6675_SS >= 0
REPORT_NAME_DIGITAL(MAX6675_SS, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
// #if defined(MISO) && MISO >= 0
// REPORT_NAME_DIGITAL(MISO, __LINE__ )
// #endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(MISO)
REPORT_NAME_DIGITAL(MISO_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOSFET_A)
REPORT_NAME_DIGITAL(MOSFET_A_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOSFET_B)
REPORT_NAME_DIGITAL(MOSFET_B_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOSFET_C)
REPORT_NAME_DIGITAL(MOSFET_C_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOSFET_D)
REPORT_NAME_DIGITAL(MOSFET_D_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
// #if defined(MOSI) && MOSI >= 0
// REPORT_NAME_DIGITAL(MOSI, __LINE__ )
// #endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(MOSI)
REPORT_NAME_DIGITAL(MOSI_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_E_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_XY_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_Z_PIN, __LINE__ )
#endif
#if PIN_EXISTS(ORIG_E0_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E0_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(ORIG_E1_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E1_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(ORIG_E2_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E2_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(ORIG_E3_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E3_AUTO_FAN_PIN, __LINE__ )
#endif
Updates to support 5 extruders
2017-04-09 08:23:05 +00:00
#if PIN_EXISTS(ORIG_E4_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E4_AUTO_FAN_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(PHOTOGRAPH)
REPORT_NAME_DIGITAL(PHOTOGRAPH_PIN, __LINE__ )
#endif
#if PIN_EXISTS(PS_ON)
REPORT_NAME_DIGITAL(PS_ON_PIN, __LINE__ )
#endif
#if PIN_EXISTS(PWM_1)
REPORT_NAME_DIGITAL(PWM_1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(PWM_2)
REPORT_NAME_DIGITAL(PWM_2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RAMPS_D10)
REPORT_NAME_DIGITAL(RAMPS_D10_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RAMPS_D8)
REPORT_NAME_DIGITAL(RAMPS_D8_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RAMPS_D9)
REPORT_NAME_DIGITAL(RAMPS_D9_PIN, __LINE__ )
#endif
Unify AVR90USB: pinsDebug changes
2017-06-08 23:08:30 +00:00
#if PIN_EXISTS(RGB_LED_R)
REPORT_NAME_DIGITAL(RGB_LED_R_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RGB_LED_G)
REPORT_NAME_DIGITAL(RGB_LED_G_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RGB_LED_B)
REPORT_NAME_DIGITAL(RGB_LED_B_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RGB_LED_W)
REPORT_NAME_DIGITAL(RGB_LED_W_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(RX_ENABLE)
REPORT_NAME_DIGITAL(RX_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SAFETY_TRIGGERED)
REPORT_NAME_DIGITAL(SAFETY_TRIGGERED_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
// #if defined(SCK) && SCK >= 0
// REPORT_NAME_DIGITAL(SCK, __LINE__ )
// #endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(SCK)
REPORT_NAME_DIGITAL(SCK_PIN, __LINE__ )
#endif
#if defined(SCL) && SCL >= 0
REPORT_NAME_DIGITAL(SCL, __LINE__ )
#endif
#if PIN_EXISTS(SD_DETECT)
REPORT_NAME_DIGITAL(SD_DETECT_PIN, __LINE__ )
#endif
#if defined(SDA) && SDA >= 0
REPORT_NAME_DIGITAL(SDA, __LINE__ )
#endif
#if defined(SDPOWER) && SDPOWER >= 0
REPORT_NAME_DIGITAL(SDPOWER, __LINE__ )
#endif
#if defined(SDSS) && SDSS >= 0
REPORT_NAME_DIGITAL(SDSS, __LINE__ )
#endif
#if PIN_EXISTS(SERVO0)
REPORT_NAME_DIGITAL(SERVO0_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SERVO1)
REPORT_NAME_DIGITAL(SERVO1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SERVO2)
REPORT_NAME_DIGITAL(SERVO2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SERVO3)
REPORT_NAME_DIGITAL(SERVO3_PIN, __LINE__ )
#endif
#if defined(SHIFT_CLK) && SHIFT_CLK >= 0
REPORT_NAME_DIGITAL(SHIFT_CLK, __LINE__ )
#endif
#if defined(SHIFT_EN) && SHIFT_EN >= 0
REPORT_NAME_DIGITAL(SHIFT_EN, __LINE__ )
#endif
#if defined(SHIFT_LD) && SHIFT_LD >= 0
REPORT_NAME_DIGITAL(SHIFT_LD, __LINE__ )
#endif
#if defined(SHIFT_OUT) && SHIFT_OUT >= 0
REPORT_NAME_DIGITAL(SHIFT_OUT, __LINE__ )
#endif
#if PIN_EXISTS(SLED)
REPORT_NAME_DIGITAL(SLED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SLEEP_WAKE)
REPORT_NAME_DIGITAL(SLEEP_WAKE_PIN, __LINE__ )
#endif
Unify AVR90USB: pinsDebug changes
2017-06-08 23:08:30 +00:00
#if PIN_EXISTS(SOL0)
REPORT_NAME_DIGITAL(SOL0_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(SOL1)
REPORT_NAME_DIGITAL(SOL1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SOL2)
REPORT_NAME_DIGITAL(SOL2_PIN, __LINE__ )
#endif
Unify AVR90USB: pinsDebug changes
2017-06-08 23:08:30 +00:00
#if PIN_EXISTS(SOL3)
REPORT_NAME_DIGITAL(SOL3_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SOL4)
REPORT_NAME_DIGITAL(SOL4_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if defined(SPARE_IO) && SPARE_IO >= 0
REPORT_NAME_DIGITAL(SPARE_IO, __LINE__ )
#endif
#if PIN_EXISTS(SPINDLE_DIR)
REPORT_NAME_DIGITAL(SPINDLE_DIR_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(SPINDLE_ENABLE)
REPORT_NAME_DIGITAL(SPINDLE_ENABLE_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(SPINDLE_LASER_ENABLE)
REPORT_NAME_DIGITAL(SPINDLE_LASER_ENABLE_PIN, __LINE__ )
#endif
SPINDLE/LASER pins changes
2017-04-07 18:52:21 +00:00
#if PIN_EXISTS(SPINDLE_LASER_PWM)
REPORT_NAME_DIGITAL(SPINDLE_LASER_PWM_PIN, __LINE__ )
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#endif
#if PIN_EXISTS(SR_CLK)
REPORT_NAME_DIGITAL(SR_CLK_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SR_DATA)
REPORT_NAME_DIGITAL(SR_DATA_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SR_STROBE)
REPORT_NAME_DIGITAL(SR_STROBE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SS)
REPORT_NAME_DIGITAL(SS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(STAT_LED_BLUE)
REPORT_NAME_DIGITAL(STAT_LED_BLUE_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if defined(STAT_LED_RED_LED) && STAT_LED_RED_LED >= 0
REPORT_NAME_DIGITAL(STAT_LED_RED_LED, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(STAT_LED_RED)
REPORT_NAME_DIGITAL(STAT_LED_RED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(STEPPER_RESET)
REPORT_NAME_DIGITAL(STEPPER_RESET_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SUICIDE)
REPORT_NAME_DIGITAL(SUICIDE_PIN, __LINE__ )
#endif
#if defined(TC1) && TC1 >= 0 && TC1 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TC1, __LINE__ )
#endif
#if defined(TC2) && TC2 >= 0 && TC2 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TC2, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_0) && TEMP_0_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_0_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_1) && TEMP_1_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_2) && TEMP_2_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_3) && TEMP_3_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_3_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_4) && TEMP_4_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_4_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_BED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_CHAMBER) && TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_CHAMBER_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_X) && TEMP_X_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_X_PIN, __LINE__ )
#endif
#if PIN_EXISTS(THERMO_DO)
REPORT_NAME_DIGITAL(THERMO_DO_PIN, __LINE__ )
#endif
#if PIN_EXISTS(THERMO_SCK)
REPORT_NAME_DIGITAL(THERMO_SCK_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TLC_BLANK)
REPORT_NAME_DIGITAL(TLC_BLANK_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TLC_CLOCK)
REPORT_NAME_DIGITAL(TLC_CLOCK_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TLC_DATA)
REPORT_NAME_DIGITAL(TLC_DATA_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TLC_XLAT)
REPORT_NAME_DIGITAL(TLC_XLAT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_0)
REPORT_NAME_DIGITAL(TOOL_0_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_0_PWM)
REPORT_NAME_DIGITAL(TOOL_0_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_1)
REPORT_NAME_DIGITAL(TOOL_1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_1_PWM)
REPORT_NAME_DIGITAL(TOOL_1_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_2)
REPORT_NAME_DIGITAL(TOOL_2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_2_PWM)
REPORT_NAME_DIGITAL(TOOL_2_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_3)
REPORT_NAME_DIGITAL(TOOL_3_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_3_PWM)
REPORT_NAME_DIGITAL(TOOL_3_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_PWM)
REPORT_NAME_DIGITAL(TOOL_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TX_ENABLE)
REPORT_NAME_DIGITAL(TX_ENABLE_PIN, __LINE__ )
#endif
#if defined(UI1) && UI1 >= 0
REPORT_NAME_DIGITAL(UI1, __LINE__ )
#endif
#if defined(UI2) && UI2 >= 0
REPORT_NAME_DIGITAL(UI2, __LINE__ )
#endif
#if defined(UNUSED_PWM) && UNUSED_PWM >= 0
REPORT_NAME_DIGITAL(UNUSED_PWM, __LINE__ )
#endif
#if PIN_EXISTS(X_ATT)
REPORT_NAME_DIGITAL(X_ATT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_CS)
REPORT_NAME_DIGITAL(X_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_DIR)
REPORT_NAME_DIGITAL(X_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_ENABLE)
REPORT_NAME_DIGITAL(X_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_MAX)
REPORT_NAME_DIGITAL(X_MAX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_MIN)
REPORT_NAME_DIGITAL(X_MIN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_MS1)
REPORT_NAME_DIGITAL(X_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_MS2)
REPORT_NAME_DIGITAL(X_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_STEP)
REPORT_NAME_DIGITAL(X_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_STOP)
REPORT_NAME_DIGITAL(X_STOP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X2_DIR)
REPORT_NAME_DIGITAL(X2_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X2_ENABLE)
REPORT_NAME_DIGITAL(X2_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X2_STEP)
REPORT_NAME_DIGITAL(X2_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_ATT)
REPORT_NAME_DIGITAL(Y_ATT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_CS)
REPORT_NAME_DIGITAL(Y_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_DIR)
REPORT_NAME_DIGITAL(Y_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_ENABLE)
REPORT_NAME_DIGITAL(Y_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_MAX)
REPORT_NAME_DIGITAL(Y_MAX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_MIN)
REPORT_NAME_DIGITAL(Y_MIN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_MS1)
REPORT_NAME_DIGITAL(Y_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_MS2)
REPORT_NAME_DIGITAL(Y_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_STEP)
REPORT_NAME_DIGITAL(Y_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_STOP)
REPORT_NAME_DIGITAL(Y_STOP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y2_DIR)
REPORT_NAME_DIGITAL(Y2_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y2_ENABLE)
REPORT_NAME_DIGITAL(Y2_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y2_STEP)
REPORT_NAME_DIGITAL(Y2_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_ATT)
REPORT_NAME_DIGITAL(Z_ATT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_CS)
REPORT_NAME_DIGITAL(Z_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_DIR)
REPORT_NAME_DIGITAL(Z_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_ENABLE)
REPORT_NAME_DIGITAL(Z_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MAX)
REPORT_NAME_DIGITAL(Z_MAX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MIN)
REPORT_NAME_DIGITAL(Z_MIN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MIN_PROBE)
REPORT_NAME_DIGITAL(Z_MIN_PROBE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MS1)
REPORT_NAME_DIGITAL(Z_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MS2)
REPORT_NAME_DIGITAL(Z_MS2_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(Z_PROBE)
REPORT_NAME_DIGITAL(Z_PROBE_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(Z_STEP)
REPORT_NAME_DIGITAL(Z_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_STOP)
REPORT_NAME_DIGITAL(Z_STOP_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(Z2_CS)
REPORT_NAME_DIGITAL(Z2_CS_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(Z2_DIR)
REPORT_NAME_DIGITAL(Z2_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z2_ENABLE)
REPORT_NAME_DIGITAL(Z2_ENABLE_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(Z2_MS1)
REPORT_NAME_DIGITAL(Z2_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z2_MS2)
REPORT_NAME_DIGITAL(Z2_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z2_MS3)
REPORT_NAME_DIGITAL(Z2_MS3_PIN, __LINE__ )
#endif
pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins
2017-03-20 11:10:31 +00:00
#if PIN_EXISTS(Z2_STEP)
REPORT_NAME_DIGITAL(Z2_STEP_PIN, __LINE__ )
#endif
Pins spacing, 2.0.x parity
2018-02-18 03:43:47 +00:00
#if PIN_EXISTS(ZRIB_V20_D6)
REPORT_NAME_DIGITAL(ZRIB_V20_D6_PIN, __LINE__ )
#endif
#if PIN_EXISTS(ZRIB_V20_D9)
REPORT_NAME_DIGITAL(ZRIB_V20_D9_PIN, __LINE__ )
#endif
[1.1.x] TMC driver update (#8712)
2017-12-15 21:02:39 +00:00
#if PIN_EXISTS(X_SERIAL_TX)
REPORT_NAME_DIGITAL(X_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_SERIAL_RX)
REPORT_NAME_DIGITAL(X_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X2_SERIAL_TX)
REPORT_NAME_DIGITAL(X2_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X2_SERIAL_RX)
REPORT_NAME_DIGITAL(X2_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_SERIAL_TX)
REPORT_NAME_DIGITAL(Y_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_SERIAL_RX)
REPORT_NAME_DIGITAL(Y_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y2_SERIAL_TX)
REPORT_NAME_DIGITAL(Y2_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y2_SERIAL_RX)
REPORT_NAME_DIGITAL(Y2_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_SERIAL_TX)
REPORT_NAME_DIGITAL(Z_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_SERIAL_RX)
REPORT_NAME_DIGITAL(Z_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z2_SERIAL_TX)
REPORT_NAME_DIGITAL(Z2_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z2_SERIAL_RX)
REPORT_NAME_DIGITAL(Z2_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_SERIAL_TX)
REPORT_NAME_DIGITAL(E0_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_SERIAL_RX)
REPORT_NAME_DIGITAL(E0_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_SERIAL_TX)
REPORT_NAME_DIGITAL(E1_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_SERIAL_RX)
REPORT_NAME_DIGITAL(E1_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E2_SERIAL_TX)
REPORT_NAME_DIGITAL(E2_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E2_SERIAL_RX)
REPORT_NAME_DIGITAL(E2_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E3_SERIAL_TX)
REPORT_NAME_DIGITAL(E3_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E3_SERIAL_RX)
REPORT_NAME_DIGITAL(E3_SERIAL_RX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E4_SERIAL_TX)
REPORT_NAME_DIGITAL(E4_SERIAL_TX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E4_SERIAL_RX)
REPORT_NAME_DIGITAL(E4_SERIAL_RX_PIN, __LINE__ )
#endif
Reference in New Issue Copy Permalink