1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-13 22:11:38 +00:00
MarlinFirmware/Marlin/src/pins/pins_K8800.h

109 lines
2.5 KiB
C
Raw Normal View History

2019-02-04 06:15:08 +00:00
/**
* Marlin 3D Printer Firmware
2019-02-12 21:06:53 +00:00
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
2019-02-04 06:15:08 +00:00
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Velleman K8800 (Vertex)
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define DEFAULT_MACHINE_NAME "Vertex Delta"
#define BOARD_NAME "K8800"
//#define LCD_SCREEN_ROT_180
//
// Limit Switches
//
#define X_STOP_PIN 3
#define Y_STOP_PIN 14
#define Z_MIN_PIN 68 // Used for bed leveling
#define Z_MAX_PIN 66
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 63
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#define E1_STEP_PIN 32
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
//
// Temperature Sensors
//
#define TEMP_0_PIN 13
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define FAN_PIN 8
#define CONTROLLER_FAN_PIN 9
//
// Misc. Functions
//
#define SDSS 25
#define FIL_RUNOUT_PIN 69 // PK7
#define KILL_PIN 20 // PD1
//
// LCD / Controller
//
#define SD_DETECT_PIN 21 // PD0
#define LCD_SDSS 53
#define BEEPER_PIN 6
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 37
#define LCD_PINS_D5 35
#define LCD_PINS_D6 33
#define LCD_PINS_D7 31
#if ENABLED(NEWPANEL)
#define BTN_EN1 17
#define BTN_EN2 16
#define BTN_ENC 23
#endif