1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-05 02:19:14 +00:00
MarlinFirmware/Marlin/src/feature/runout.h

101 lines
3.3 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* feature/runout.h - Runout sensor support
*/
#ifndef _RUNOUT_H_
#define _RUNOUT_H_
#include "../sd/cardreader.h"
#include "../module/printcounter.h"
#include "../module/stepper.h"
#include "../gcode/queue.h"
#include "../inc/MarlinConfig.h"
#define FIL_RUNOUT_THRESHOLD 5
class FilamentRunoutSensor {
2018-02-22 18:26:14 +00:00
public:
static bool enabled;
2018-02-22 18:26:14 +00:00
FilamentRunoutSensor() {}
2018-02-22 18:26:14 +00:00
static void setup();
FORCE_INLINE static void reset() { runout_count = 0; filament_ran_out = false; }
2018-02-22 18:26:14 +00:00
FORCE_INLINE static void run() {
if ((IS_SD_PRINTING || print_job_timer.isRunning()) && check() && !filament_ran_out) {
filament_ran_out = true;
enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
planner.synchronize();
2018-02-22 18:26:14 +00:00
}
}
private:
static bool filament_ran_out;
static uint8_t runout_count;
2018-02-22 18:26:14 +00:00
FORCE_INLINE static bool check() {
if (!enabled) return false;
2018-02-22 18:26:14 +00:00
#if NUM_RUNOUT_SENSORS < 2
// A single sensor applying to all extruders
const bool is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING;
2018-02-22 18:26:14 +00:00
#else
// Read the sensor for the active extruder
bool is_out;
2018-09-17 06:06:22 +00:00
#if ENABLED(DUAL_X_CARRIAGE)
const bool out1 = READ(FIL_RUNOUT_PIN ) == FIL_RUNOUT_INVERTING,
out2 = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING;
if (extruder_duplication_enabled)
is_out = out1 || out2;
else
is_out = active_extruder ? out2 : out1;
#else
switch (active_extruder) {
case 0: is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; break;
case 1: is_out = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 2
case 2: is_out = READ(FIL_RUNOUT3_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 3
case 3: is_out = READ(FIL_RUNOUT4_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 4
case 4: is_out = READ(FIL_RUNOUT5_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 5
case 5: is_out = READ(FIL_RUNOUT6_PIN) == FIL_RUNOUT_INVERTING; break;
#endif // > 5
#endif // > 4
#endif // > 3
#endif // > 2
2018-02-22 18:26:14 +00:00
}
2018-09-17 06:06:22 +00:00
#endif
2018-02-22 18:26:14 +00:00
#endif
return (is_out ? ++runout_count : (runout_count = 0)) > FIL_RUNOUT_THRESHOLD;
}
};
extern FilamentRunoutSensor runout;
#endif // _RUNOUT_H_