1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-13 05:51:38 +00:00
MarlinFirmware/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h

186 lines
5.8 KiB
C
Raw Normal View History

2020-06-12 01:43:28 +00:00
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Tenlog pin assignments
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2
#error "Tenlog supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "Tenlog D3 Hero"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Servos
//
#define SERVO0_PIN 11
#define SERVO1_PIN 6
#define SERVO2_PIN -1 // Original pin 5 used for hotend fans
#define SERVO3_PIN 4
//
// Limit Switches
//
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_MIN_PIN 14
//#define Y_MAX_PIN 15 // Connected to "DJ" plug on extruder heads
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 15 // Ramps is normally 32
#endif
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
//#ifndef X_CS_PIN
//#define X_CS_PIN 53
//#endif
#define X2_STEP_PIN 36
#define X2_DIR_PIN 34
#define X2_ENABLE_PIN 30
//#ifndef X2_CS_PIN
//#define X2_CS_PIN 53
//#endif
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
//#ifndef Y_CS_PIN
//#define Y_CS_PIN 49
//#endif
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
//#ifndef Z_CS_PIN
//#define Z_CS_PIN 40
//#endif
#define Z2_STEP_PIN 65
#define Z2_DIR_PIN 66
#define Z2_ENABLE_PIN 64
//#ifndef Z2_CS_PIN
//#define Z2_CS_PIN 40
//#endif
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
//#ifndef E0_CS_PIN
//define E0_CS_PIN 42
//#endif
#define E1_STEP_PIN 57
#define E1_DIR_PIN 58
#define E1_ENABLE_PIN 59
//#ifndef E1_CS_PIN
//define E1_CS_PIN 44
//#endif
//#define E2_STEP_PIN 42
//#define E2_DIR_PIN 43
//#define E2_ENABLE_PIN 44
//
// Temperature Sensors
//
#define TEMP_0_PIN 13 // Analog Input
#define TEMP_1_PIN 15 // Analog Input
#define TEMP_BED_PIN 14 // Analog Input
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN -1 // Don't use 53 if using Display/SD card
#else
#define MAX6675_SS_PIN -1 // Don't use 49 (SD_DETECT_PIN)
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define HEATER_1_PIN 11
#define HEATER_BED_PIN 8
#define FAN_PIN 9
#define FAN1_PIN 5 // Normall this would be a servo pin
// XXX Runout support unknown?
//#define NUM_RUNOUT_SENSORS 0
//#define FIL_RUNOUT_PIN 22
//#define FIL_RUNOUT2_PIN 21
//
// Misc. Functions
//
//#define CASE_LIGHT_PIN 5
#define SDSS 53
//#ifndef LED_PIN
//#define LED_PIN 13
//#endif
//#define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM
//#define SPINDLE_LASER_ENA_PIN 4 // Pullup!
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
//#define FILWIDTH_PIN 5 // Analog Input
//
// LCD / Controller
//
//#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
//#define BTN_EN1 31
//#define BTN_EN2 33
//#define BTN_ENC 35
#define SD_DETECT_PIN 49
//#ifndef KILL_PIN
//#define KILL_PIN 41
//#endif
//#ifndef BEEPER_PIN
#define BEEPER_PIN -1
//#endif
//#endif // REPRAP_DISCOUNT_SMART_CONTROLLER