diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 36caf2ecb1a..9dbb9c90d94 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -955,9 +955,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h index e8e57f0452c..b0a8da66308 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h @@ -975,9 +975,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index b23d20b82f9..ad4eb4e840d 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h index 3a8f5930974..73d32ed38b2 100644 --- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h +++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h @@ -955,9 +955,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h index 5f5779900ad..cc93e57c552 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration.h +++ b/Marlin/example_configurations/Anet/A6/Configuration.h @@ -1098,9 +1098,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index 56cb9a00332..0e2cb1fab2e 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h index 52ba39a191c..ef5df17bb46 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration.h +++ b/Marlin/example_configurations/Anet/A8/Configuration.h @@ -961,9 +961,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index aa91f62e957..b59a33568d2 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h index 3ef608475a5..ab4cdea971c 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h @@ -946,9 +946,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index c4976d6ab02..bb5dd1f2eeb 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h index d5cdb474bf0..76efbb46b94 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h @@ -956,9 +956,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index 882756de353..73fc480407d 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h index 43211e29539..73609211223 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h @@ -946,9 +946,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index c4976d6ab02..bb5dd1f2eeb 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 28f03e386b1..a992c98848d 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -954,9 +954,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 2c298b0c4e6..2218f740cda 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h index 101f0058f14..91be43ca38b 100644 --- a/Marlin/example_configurations/Creality/CR-10/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h @@ -965,9 +965,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 12cb35a9567..bc712c070ab 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -937,9 +937,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 5c1a7f93a2b..485b31960c8 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index deb7f11c112..f6fe1457311 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -937,9 +937,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h index ba5fa0ccc30..08bf0c4b240 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h @@ -960,9 +960,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h index 29752019f5b..ad45a96ae36 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h index cb1db46109f..83f57200bb2 100644 --- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h @@ -970,9 +970,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h index 7a70c9f0354..281b0a93282 100644 --- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -955,9 +955,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h index 006c73f9995..9d99e329ba1 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h @@ -959,9 +959,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index fb70c993904..8e702a6aa32 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h index 82a3c5e345c..3a1ce6a279d 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration.h @@ -983,9 +983,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index 05ea230b740..65bf34eefbe 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 3de04088b7c..0a6ee312632 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -955,9 +955,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 89fb1bd08cd..e272546349e 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -953,9 +953,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 4dbad638f2a..9fd3002471a 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 0f26a111e41..d9f63f98cf0 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -967,9 +967,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 4fa0a83d576..e5ac525ace5 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h index 44077d74aea..bfa1010ab55 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration.h @@ -986,9 +986,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index b854242c54b..f750cddf8fc 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -1011,9 +1011,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index a08e44d3a91..ad88380a324 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h index 0289aaf277c..11af55ea215 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h @@ -984,9 +984,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h index a02d1bd5555..a4273af4c28 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -235,7 +235,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h index 68ac58e8f5a..d9544cec208 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h @@ -955,9 +955,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index cd51ab39f8b..6241d4a405a 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h index cb3fc4fe74c..982cad61243 100644 --- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h @@ -955,9 +955,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 0352d246080..1aa2b55cd03 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -955,9 +955,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h index 32d865f5763..e11590430d2 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h @@ -1083,9 +1083,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index 2f40f632960..2896a841140 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index 5953fb8693f..e80e4880314 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -1077,9 +1077,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index 4ff8d44edb9..f5ae3f5af1a 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 4c6d3309909..d976cef2840 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -1072,9 +1072,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 4ff8d44edb9..f5ae3f5af1a 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 62d7f2f0dbf..8c34c35d83d 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -1075,9 +1075,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 4ff8d44edb9..f5ae3f5af1a 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 8cd192b6f80..9bb6c35aa04 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -1075,9 +1075,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index 368725a2c2c..7295cf7bdbb 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -227,7 +227,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index d7531f779bb..85634696fcc 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -1084,9 +1084,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index 6b08ea67f2e..13083f8dcdd 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h index 34569c6e626..61b114fe57d 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h @@ -969,9 +969,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index fb38dc48a3b..55c222013e9 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 5648fe07c22..e892431a4a5 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -958,9 +958,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index feebca86b55..b2c5b637c06 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 7a43a8e84af..19803e30b19 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -950,9 +950,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 89b08e939f6..8da53664d89 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index 82018feb311..057d714abde 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -960,9 +960,11 @@ #if ENABLED(LCD_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment - #define LEVEL_BED_CORNERS // Add an option to move between corners #endif +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + /** * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index 94e2afe11d4..d50c8937cf4 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.