From 014609ad87d3556b44a00fef4c4983894f9d4354 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sat, 7 Oct 2023 00:29:34 -0500
Subject: [PATCH] =?UTF-8?q?=F0=9F=94=A7=20Move=20some=20config=20options?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 Marlin/Configuration.h | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 6111f482f14..bdd69d958ee 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1418,6 +1418,15 @@
   //#define TOUCH_MI_MANUAL_DEPLOY                // For manual deploy (LCD menu)
 #endif
 
+/**
+ * Bed Distance Sensor
+ *
+ * Measures the distance from bed to nozzle with accuracy of 0.01mm.
+ * For information about this sensor https://github.com/markniu/Bed_Distance_sensor
+ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C.
+ */
+//#define BD_SENSOR
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
 
@@ -1996,6 +2005,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Commands to execute at the end of G29 probing.
+ * Useful to retract or move the Z probe out of the way.
+ */
+//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
+
 /**
  * Normally G28 leaves leveling disabled on completion. Enable one of
  * these options to restore the prior leveling state or to always enable
@@ -2013,15 +2028,6 @@
   #define LEVELING_BED_TEMP     50
 #endif
 
-/**
- * Bed Distance Sensor
- *
- * Measures the distance from bed to nozzle with accuracy of 0.01mm.
- * For information about this sensor https://github.com/markniu/Bed_Distance_sensor
- * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C.
- */
-//#define BD_SENSOR
-
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
@@ -2201,12 +2207,6 @@
   #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB }
 #endif
 
-/**
- * Commands to execute at the end of G29 probing.
- * Useful to retract or move the Z probe out of the way.
- */
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
-
 // @section homing
 
 // The center of the bed is at (X=0, Y=0)