🩹 ProUI - Remove ManualZOffset

Marlin/src/inc/Conditionals_LCD.h

@@ -1298,6 +1298,7 @@
   // Clear probe pin settings when no probe is selected
   #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
   #undef USE_PROBE_FOR_Z_HOMING
+  #undef Z_MIN_PROBE_REPEATABILITY_TEST
 #endif
 
 #if ENABLED(BELTPRINTER) && !defined(HOME_Y_BEFORE_X)

Marlin/src/inc/Conditionals_adv.h

@@ -79,6 +79,9 @@
   #define SERVO_DELAY { 50 }
 #endif
 
+#if !HAS_BED_PROBE
+  #undef BABYSTEP_ZPROBE_OFFSET
+#endif
 #if !HAS_STOWABLE_PROBE
   #undef PROBE_DEPLOY_STOW_MENU
 #endif

Marlin/src/inc/SanityCheck.h

@@ -1938,15 +1938,17 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
    * Make sure Z raise values are set
    */
   #ifndef Z_CLEARANCE_DEPLOY_PROBE
-    #error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration."
-  #elif !defined(Z_CLEARANCE_BETWEEN_PROBES)
-    #error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration."
-  #elif Z_CLEARANCE_DEPLOY_PROBE < 0
-    #error "Probes need Z_CLEARANCE_DEPLOY_PROBE >= 0."
-  #elif Z_CLEARANCE_BETWEEN_PROBES < 0
-    #error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0."
-  #elif Z_AFTER_PROBING < 0
-    #error "Probes need Z_AFTER_PROBING >= 0."
+    #error "Z_CLEARANCE_DEPLOY_PROBE is required for bed probes."
+  #else
+    static_assert(Z_CLEARANCE_DEPLOY_PROBE >= 0, "Probes require Z_CLEARANCE_DEPLOY_PROBE >= 0.");
+  #endif
+  #ifndef Z_CLEARANCE_BETWEEN_PROBES
+    #error "Z_CLEARANCE_BETWEEN_PROBES is required for bed probes."
+  #else
+    static_assert(Z_CLEARANCE_BETWEEN_PROBES >= 0, "Probes require Z_CLEARANCE_BETWEEN_PROBES >= 0.");
+  #endif
+  #ifdef Z_AFTER_PROBING
+    static_assert(Z_AFTER_PROBING >= 0, "Probes require Z_AFTER_PROBING >= 0.");
   #endif
 
   #if MULTIPLE_PROBING > 0 || EXTRA_PROBING > 0

Marlin/src/lcd/e3v2/proui/dwin.cpp

@@ -109,14 +109,8 @@
   #include "../../../feature/bltouch.h"
 #endif
 
-#if EITHER(BABYSTEPPING, HAS_BED_PROBE)
-  #define HAS_ZOFFSET_ITEM 1
-  #if ENABLED(BABYSTEPPING)
-    #include "../../../feature/babystep.h"
-    #if !HAS_BED_PROBE
-      #define JUST_BABYSTEP 1
-    #endif
-  #endif
+#if ENABLED(BABYSTEPPING)
+  #include "../../../feature/babystep.h"
 #endif
 
 #if ENABLED(POWER_LOSS_RECOVERY)
@@ -197,8 +191,8 @@
 #define DWIN_UPDATE_INTERVAL             1024
 #define DWIN_REMAIN_TIME_UPDATE_INTERVAL SEC_TO_MS(20)
 
-#if HAS_MESH
-  #define BABY_Z_VAR TERN(HAS_BED_PROBE, probe.offset.z, HMI_data.ManualZOffset)
+#if HAS_MESH && HAS_BED_PROBE
+  #define BABY_Z_VAR probe.offset.z
 #else
   float z_offset = 0;
   #define BABY_Z_VAR z_offset
@@ -1473,10 +1467,6 @@ void DWIN_HomingStart() {
 
 void DWIN_HomingDone() {
   HMI_flag.home_flag = false;
-  #if DISABLED(HAS_BED_PROBE) && EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
-    planner.synchronize();
-    babystep.add_mm(Z_AXIS, HMI_data.ManualZOffset);
-  #endif
   HMI_ReturnScreen();
 }
 
@@ -1696,7 +1686,6 @@ void DWIN_SetDataDefaults() {
   #if BOTH(INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING)
     HMI_data.z_after_homing = DEF_Z_AFTER_HOMING;
   #endif
-  IF_DISABLED(HAS_BED_PROBE, HMI_data.ManualZOffset = 0);
   #if BOTH(LED_CONTROL_MENU, HAS_COLOR_LEDS)
     TERN_(LED_COLOR_PRESETS, leds.set_default());
     ApplyLEDColor();

Marlin/src/lcd/e3v2/proui/dwin.h

@@ -35,6 +35,13 @@
 #include "../common/encoder.h"
 #include "../../../libs/BL24CXX.h"
 
+#if EITHER(BABYSTEPPING, HAS_BED_PROBE)
+  #define HAS_ZOFFSET_ITEM 1
+  #if !HAS_BED_PROBE
+    #define JUST_BABYSTEP 1
+  #endif
+#endif
+
 namespace GET_LANG(LCD_LANGUAGE) {
   #define _MSG_PREHEAT(N) \
     LSTR MSG_PREHEAT_##N                  = _UxGT("Preheat ") PREHEAT_## N ##_LABEL; \
@@ -118,15 +125,12 @@ typedef struct {
   #if ENABLED(BAUD_RATE_GCODE)
     bool Baud115K = false;
   #endif
+
   bool FullManualTramming = false;
   bool MediaAutoMount = ENABLED(HAS_SD_EXTENDER);
   #if BOTH(INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING)
     uint8_t z_after_homing = DEF_Z_AFTER_HOMING;
   #endif
-  #if ENABLED(MESH_BED_LEVELING)
-    float ManualZOffset = 0;
-  #endif
-  // Led
   #if BOTH(LED_CONTROL_MENU, HAS_COLOR_LEDS)
     LEDColor Led_Color = Def_Leds_Color;
   #endif

Marlin/src/lcd/menu/menu_bed_leveling.cpp

@@ -68,10 +68,12 @@
   //
   void _lcd_level_bed_done() {
     if (!ui.wait_for_move) {
-      #if Z_AFTER_PROBING > 0 && DISABLED(MESH_BED_LEVELING)
-        // Display "Done" screen and wait for moves to complete
-        line_to_z(Z_AFTER_PROBING);
-        ui.synchronize(GET_TEXT_F(MSG_LEVEL_BED_DONE));
+      #if DISABLED(MESH_BED_LEVELING) && defined(Z_AFTER_PROBING)
+        if (Z_AFTER_PROBING) {
+          // Display "Done" screen and wait for moves to complete
+          line_to_z(Z_AFTER_PROBING);
+          ui.synchronize(GET_TEXT_F(MSG_LEVEL_BED_DONE));
+        }
       #endif
       ui.goto_previous_screen_no_defer();
       ui.completion_feedback();

Marlin/src/module/probe.h

@@ -161,11 +161,9 @@ public:
   #endif
 
   static void move_z_after_homing() {
-    #if ALL(DWIN_LCD_PROUI, INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING)
-      do_z_clearance(HMI_data.z_after_homing, true);
-    #elif defined(Z_AFTER_HOMING)
-      do_z_clearance(Z_AFTER_HOMING, true);
-    #elif BOTH(Z_AFTER_PROBING, HAS_BED_PROBE)
+    #if ALL(DWIN_LCD_PROUI, INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING) || defined(Z_AFTER_HOMING)
+      do_z_clearance(Z_POST_CLEARANCE, true);
+    #elif HAS_BED_PROBE
       move_z_after_probing();
     #endif
   }