3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-30 15:26:18 +00:00
Code Issues Releases Wiki Activity

🎨 Misc. temperature cleanup

Browse Source
This commit is contained in:
Scott Lahteine 2022-07-14 02:21:50 -05:00
parent 9cf1a8891f
commit 03bb28c277
5 changed files with 29 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Marlin/src/feature/controllerfan.cpp
View File

@ -38,6 +38,10 @@ uint8_t ControllerFan::speed;
const controllerFan_settings_t &ControllerFan::settings = controllerFan_defaults;
#endif
#if ENABLED(FAN_SOFT_PWM)
uint8_t ControllerFan::soft_pwm_speed;
#endif
void ControllerFan::setup() {
SET_OUTPUT(CONTROLLER_FAN_PIN);
#ifdef CONTROLLER_FAN2_PIN
@ -98,7 +102,7 @@ void ControllerFan::update() {
#endif
#if ENABLED(FAN_SOFT_PWM)
thermalManager.soft_pwm_controller_speed = speed;
soft_pwm_speed = speed;
#else
if (PWM_PIN(CONTROLLER_FAN_PIN))
hal.set_pwm_duty(pin_t(CONTROLLER_FAN_PIN), speed);

3
Marlin/src/feature/controllerfan.h
View File

@ -60,6 +60,9 @@ class ControllerFan {
#else
static const controllerFan_settings_t &settings;
#endif
#if ENABLED(FAN_SOFT_PWM)
static uint8_t soft_pwm_speed;
#endif
static bool state() { return speed > 0; }
static void init() { reset(); }
static void reset() { TERN_(CONTROLLER_FAN_EDITABLE, settings = controllerFan_defaults); }

26
Marlin/src/gcode/control/M42.cpp
View File

@ -87,30 +87,8 @@ void GcodeSuite::M42() {
#if HAS_FAN
switch (pin) {
#if HAS_FAN0
case FAN0_PIN: thermalManager.fan_speed[0] = pin_status; return;
#endif
#if HAS_FAN1
case FAN1_PIN: thermalManager.fan_speed[1] = pin_status; return;
#endif
#if HAS_FAN2
case FAN2_PIN: thermalManager.fan_speed[2] = pin_status; return;
#endif
#if HAS_FAN3
case FAN3_PIN: thermalManager.fan_speed[3] = pin_status; return;
#endif
#if HAS_FAN4
case FAN4_PIN: thermalManager.fan_speed[4] = pin_status; return;
#endif
#if HAS_FAN5
case FAN5_PIN: thermalManager.fan_speed[5] = pin_status; return;
#endif
#if HAS_FAN6
case FAN6_PIN: thermalManager.fan_speed[6] = pin_status; return;
#endif
#if HAS_FAN7
case FAN7_PIN: thermalManager.fan_speed[7] = pin_status; return;
#endif
#define _CASE(N) case FAN##N##_PIN: thermalManager.fan_speed[N] = pin_status; return;
REPEAT(FAN_COUNT, _CASE)
}
#endif

2
Marlin/src/gcode/temp/M106_M107.cpp
View File

@ -85,7 +85,7 @@ void GcodeSuite::M106() {
if (!got_preset && parser.seenval('S'))
speed = parser.value_ushort();
TERN_(FOAMCUTTER_XYUV, speed *= 2.55); // Get command in % of max heat
TERN_(FOAMCUTTER_XYUV, speed *= 2.55f); // Get command in % of max heat
// Set speed, with constraint
thermalManager.set_fan_speed(pfan, speed);

36
Marlin/src/module/temperature.cpp
View File

@ -524,7 +524,7 @@ PGMSTR(str_t_heating_failed, STR_T_HEATING_FAILED);
#if HAS_TEMP_CHAMBER
chamber_info_t Temperature::temp_chamber; // = { 0 }
#if HAS_HEATED_CHAMBER
millis_t next_cool_check_ms_2 = 0;
millis_t next_cool_check_ms = 0;
celsius_float_t old_temp = 9999;
raw_adc_t Temperature::mintemp_raw_CHAMBER = TEMP_SENSOR_CHAMBER_RAW_LO_TEMP,
Temperature::maxtemp_raw_CHAMBER = TEMP_SENSOR_CHAMBER_RAW_HI_TEMP;
@ -546,7 +546,7 @@ PGMSTR(str_t_heating_failed, STR_T_HEATING_FAILED);
raw_adc_t Temperature::mintemp_raw_COOLER = TEMP_SENSOR_COOLER_RAW_LO_TEMP,
Temperature::maxtemp_raw_COOLER = TEMP_SENSOR_COOLER_RAW_HI_TEMP;
#if WATCH_COOLER
cooler_watch_t Temperature::watch_cooler{0};
cooler_watch_t Temperature::watch_cooler; // = { 0 }
#endif
millis_t Temperature::next_cooler_check_ms, Temperature::cooler_fan_flush_ms;
#endif
@ -617,11 +617,11 @@ volatile bool Temperature::raw_temps_ready = false;
#if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1
#define MULTI_MAX_CONSECUTIVE_LOW_TEMP_ERR 1
uint8_t Temperature::consecutive_low_temperature_error[HOTENDS] = { 0 };
uint8_t Temperature::consecutive_low_temperature_error[HOTENDS]; // = { 0 }
#endif
#if PREHEAT_TIME_HOTEND_MS > 0
millis_t Temperature::preheat_end_ms_hotend[HOTENDS] { 0 };
millis_t Temperature::preheat_end_ms_hotend[HOTENDS]; // = { 0 };
#endif
#if HAS_HEATED_BED && PREHEAT_TIME_BED_MS > 0
millis_t Temperature::preheat_end_ms_bed = 0;
@ -1781,15 +1781,15 @@ void Temperature::mintemp_error(const heater_id_t heater_id) {
if (!flag_chamber_excess_heat && temp_chamber.is_above_target((HIGH_EXCESS_HEAT_LIMIT) - 1)) {
// Open vent after MIN_COOLING_SLOPE_TIME_CHAMBER_VENT seconds if the
// temperature didn't drop at least MIN_COOLING_SLOPE_DEG_CHAMBER_VENT
if (next_cool_check_ms_2 == 0 || ELAPSED(ms, next_cool_check_ms_2)) {
if (next_cool_check_ms == 0 || ELAPSED(ms, next_cool_check_ms)) {
if (temp_chamber.celsius - old_temp > MIN_COOLING_SLOPE_DEG_CHAMBER_VENT)
flag_chamber_excess_heat = true; // the bed is heating the chamber too much
next_cool_check_ms_2 = ms + SEC_TO_MS(MIN_COOLING_SLOPE_TIME_CHAMBER_VENT);
next_cool_check_ms = ms + SEC_TO_MS(MIN_COOLING_SLOPE_TIME_CHAMBER_VENT);
old_temp = temp_chamber.celsius;
}
}
else {
next_cool_check_ms_2 = 0;
next_cool_check_ms = 0;
old_temp = 9999;
}
if (flag_chamber_excess_heat && temp_chamber.is_above_target((LOW_EXCESS_HEAT_LIMIT) - 1))
@ -2492,7 +2492,7 @@ void Temperature::updateTemperaturesFromRawValues() {
/**
// DEBUG PREHEATING TIME
SERIAL_ECHOLNPGM("\nExtruder = ", e, " Preheat On/Off = ", is_preheating(e));
const float test_is_preheating = (preheat_end_time[HOTEND_INDEX] - millis()) * 0.001f;
const float test_is_preheating = (preheat_end_ms_hotend[HOTEND_INDEX] - millis()) * 0.001f;
if (test_is_preheating < 31) SERIAL_ECHOLNPGM("Extruder = ", e, " Preheat remaining time = ", test_is_preheating, "s", "\n");
//*/
@ -3551,7 +3551,7 @@ void Temperature::isr() {
#if ENABLED(FAN_SOFT_PWM)
#if ENABLED(USE_CONTROLLER_FAN)
WRITE(CONTROLLER_FAN_PIN, soft_pwm_controller.add(pwm_mask, soft_pwm_controller_speed));
WRITE(CONTROLLER_FAN_PIN, soft_pwm_controller.add(pwm_mask, controllerFan.soft_pwm_speed));
#endif
#define _FAN_PWM(N) do{ \
@ -4183,7 +4183,7 @@ void Temperature::isr() {
bool wants_to_cool = false;
celsius_float_t target_temp = -1.0, old_temp = 9999.0;
millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
millis_t now, next_temp_ms = 0, cool_check_ms = 0;
wait_for_heatup = true;
do {
// Target temperature might be changed during the loop
@ -4241,9 +4241,9 @@ void Temperature::isr() {
if (wants_to_cool) {
// Break after MIN_COOLING_SLOPE_TIME seconds
// if the temperature did not drop at least MIN_COOLING_SLOPE_DEG
if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) {
if (!cool_check_ms || ELAPSED(now, cool_check_ms)) {
if (old_temp - temp < float(MIN_COOLING_SLOPE_DEG)) break;
next_cool_check_ms = now + SEC_TO_MS(MIN_COOLING_SLOPE_TIME);
cool_check_ms = now + SEC_TO_MS(MIN_COOLING_SLOPE_TIME);
old_temp = temp;
}
}
@ -4320,7 +4320,7 @@ void Temperature::isr() {
bool wants_to_cool = false;
celsius_float_t target_temp = -1, old_temp = 9999;
millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
millis_t now, next_temp_ms = 0, cool_check_ms = 0;
wait_for_heatup = true;
do {
// Target temperature might be changed during the loop
@ -4376,9 +4376,9 @@ void Temperature::isr() {
if (wants_to_cool) {
// Break after MIN_COOLING_SLOPE_TIME_BED seconds
// if the temperature did not drop at least MIN_COOLING_SLOPE_DEG_BED
if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) {
if (!cool_check_ms || ELAPSED(now, cool_check_ms)) {
if (old_temp - temp < float(MIN_COOLING_SLOPE_DEG_BED)) break;
next_cool_check_ms = now + SEC_TO_MS(MIN_COOLING_SLOPE_TIME_BED);
cool_check_ms = now + SEC_TO_MS(MIN_COOLING_SLOPE_TIME_BED);
old_temp = temp;
}
}
@ -4515,7 +4515,7 @@ void Temperature::isr() {
bool wants_to_cool = false;
float target_temp = -1, old_temp = 9999;
millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
millis_t now, next_temp_ms = 0, cool_check_ms = 0;
wait_for_heatup = true;
do {
// Target temperature might be changed during the loop
@ -4567,9 +4567,9 @@ void Temperature::isr() {
if (wants_to_cool) {
// Break after MIN_COOLING_SLOPE_TIME_CHAMBER seconds
// if the temperature did not drop at least MIN_COOLING_SLOPE_DEG_CHAMBER
if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) {
if (!cool_check_ms || ELAPSED(now, cool_check_ms)) {
if (old_temp - temp < float(MIN_COOLING_SLOPE_DEG_CHAMBER)) break;
next_cool_check_ms = now + SEC_TO_MS(MIN_COOLING_SLOPE_TIME_CHAMBER);
cool_check_ms = now + SEC_TO_MS(MIN_COOLING_SLOPE_TIME_CHAMBER);
old_temp = temp;
}
}