3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-25 21:07:32 +00:00
Code Issues Releases Wiki Activity

🔨 BTT STM32G0B1RE xfer build (#24245)

Browse Source
This commit is contained in:
elimisback 2022-05-28 16:22:59 -04:00 committed by Scott Lahteine
parent c56fb1c182
commit 047d0264c5
4 changed files with 17 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Marlin/src/inc/SanityCheck.h
View File

@ -3954,3 +3954,8 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive.");
#elif ENABLED(DISABLE_JTAG) && !defined(JTAG_DISABLE)
#error "DISABLE_JTAG is not supported for the selected MCU/Board."
#endif
// Check requirements for upload.py
#if ENABLED(XFER_BUILD) && !BOTH(BINARY_FILE_TRANSFER, CUSTOM_FIRMWARE_UPLOAD)
#error "BINARY_FILE_TRANSFER and CUSTOM_FIRMWARE_UPLOAD are required for custom upload."
#endif

2
Marlin/src/pins/pins.h
View File

@ -540,7 +540,7 @@
#elif MB(BTT_SKR_MINI_E3_V2_0)
#include "stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RE_btt env:STM32F103RE_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple env:STM32F103RE_btt_maple env:STM32F103RE_btt_USB_maple
#elif MB(BTT_SKR_MINI_E3_V3_0)
#include "stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h" // STM32G0 env:STM32G0B1RE_btt
#include "stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h" // STM32G0 env:STM32G0B1RE_btt env:STM32G0B1RE_btt_xfer
#elif MB(BTT_SKR_MINI_MZ_V1_0)
#include "stm32f1/pins_BTT_SKR_MINI_MZ_V1_0.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple
#elif MB(BTT_SKR_E3_DIP)

1
ini/stm32f1.ini
View File

@ -138,6 +138,7 @@ upload_protocol = jlink
#
[STM32F103Rx_creality_xfer]
extends = STM32F103Rx_creality
build_flags = ${STM32F103Rx_creality.build_flags} -DXFER_BUILD
extra_scripts = ${STM32F103Rx_creality.extra_scripts}
pre:buildroot/share/scripts/upload.py
upload_protocol = custom

10
ini/stm32g0.ini
View File

@ -36,3 +36,13 @@ build_flags = ${stm32_variant.build_flags}
-DSTEP_TIMER_IRQ_PRIO=0
upload_protocol = stlink
debug_tool = stlink
#
# Custom upload to SD via Marlin with Binary Protocol
#
[env:STM32G0B1RE_btt_xfer]
extends = env:STM32G0B1RE_btt
build_flags = ${env:STM32G0B1RE_btt.build_flags} -DXFER_BUILD
extra_scripts = ${env:STM32G0B1RE_btt.extra_scripts}
pre:buildroot/share/scripts/upload.py
upload_protocol = custom