From 073857646bd9538db84fd7757844120e901b04be Mon Sep 17 00:00:00 2001 From: Roxy-3D Date: Thu, 6 Sep 2018 09:43:43 -0500 Subject: [PATCH] seperate the T-Rex2 and T-Rex3 support --- Marlin/src/pins/pins_FORMBOT.h | 188 --------------------------------- 1 file changed, 188 deletions(-) delete mode 100644 Marlin/src/pins/pins_FORMBOT.h diff --git a/Marlin/src/pins/pins_FORMBOT.h b/Marlin/src/pins/pins_FORMBOT.h deleted file mode 100644 index a3773f5991..0000000000 --- a/Marlin/src/pins/pins_FORMBOT.h +++ /dev/null @@ -1,188 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - -/** - * Formbot pin assignments - */ - -#ifndef __AVR_ATmega2560__ - #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." -#endif - -#if E_STEPPERS > 3 || HOTENDS > 3 - #error "Formbot supports up to 3 hotends / E-steppers. Comment this line to keep going." -#endif - -#define DEFAULT_MACHINE_NAME "Formbot" -#define BOARD_NAME "Formbot" - -// -// Servos -// -#define SERVO0_PIN 11 -#define SERVO1_PIN 6 -#define SERVO2_PIN 5 -#define SERVO3_PIN -1 - -// -// Limit Switches -// -#define X_MIN_PIN 3 -#ifndef X_MAX_PIN - #define X_MAX_PIN 2 -#endif -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 - -// -// Z Probe (when not Z_MIN_PIN) -// -#ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 -#endif - -// -// Steppers -// -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 -#ifndef X_CS_PIN - #define X_CS_PIN 53 -#endif - -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 -#ifndef Y_CS_PIN - #define Y_CS_PIN 49 -#endif - -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 -#ifndef Z_CS_PIN - #define Z_CS_PIN 40 -#endif - -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 -#ifndef E0_CS_PIN - #define E0_CS_PIN 42 -#endif - -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 -#ifndef E1_CS_PIN - #define E1_CS_PIN 44 -#endif - -#define E2_STEP_PIN 42 -#define E2_DIR_PIN 43 -#define E2_ENABLE_PIN 44 - -// -// Temperature Sensors -// -#define TEMP_0_PIN 13 // Analog Input -#define TEMP_1_PIN 15 // Analog Input -#define TEMP_BED_PIN 3 // Analog Input - -// SPI for Max6675 or Max31855 Thermocouple -#if DISABLED(SDSUPPORT) - #define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card -#else - #define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present -#endif - -// -// Augmentation for auto-assigning RAMPS plugs -// -#if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) - #if HOTENDS > 1 - #if TEMP_SENSOR_BED - #define IS_RAMPS_EEB - #else - #define IS_RAMPS_EEF - #endif - #elif TEMP_SENSOR_BED - #define IS_RAMPS_EFB - #else - #define IS_RAMPS_EFF - #endif -#endif - -// -// Heaters / Fans -// -#define HEATER_0_PIN 10 -#define HEATER_1_PIN 7 -#define HEATER_BED_PIN 58 - -#define LED4_PIN 8 - -#define FAN_PIN 9 - -#if DISABLED(FILAMENT_RUNOUT_SENSOR) - #define FAN1_PIN 4 -#endif - -// -// Misc. Functions -// -#define SDSS 53 -#ifndef ROXYs_TRex - #define LED_PIN 13 -#endif - -// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector -#define FILWIDTH_PIN 5 // Analog Input - -#ifndef PS_ON_PIN - #define PS_ON_PIN 12 -#endif - -// -// LCD / Controller -// -// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER -// -#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #ifndef ROXYs_TRex - #define KILL_PIN 41 - #define BEEPER_PIN 37 - #endif -#endif