3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 12:04:19 +00:00
Code Issues Releases Wiki Activity

Further cleanup of comments, partial Doxygen-style

Browse Source 
Following up on #3231
This commit is contained in:
Scott Lahteine 2016-03-24 23:19:46 -07:00
parent 4823791eb0
commit 0da744b7b0
191 changed files with 904 additions and 496 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/Conditionals.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Conditionals.h
* Defines that depend on configuration but are not editable.
*/

29
Marlin/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

4
Marlin/Default_Version.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* This file is a placeholder for a file which could be distributed in an archive
* It takes the place of an automatically created "_Version.h" which is generated during the build process
*/

39
Marlin/M100_Free_Mem_Chk.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,29 +20,26 @@
*
*/
/**
* M100 Free Memory Watcher
*
* This code watches the free memory block between the bottom of the heap and the top of the stack.
* This memory block is initialized and watched via the M100 command.
*
* M100 I Initializes the free memory block and prints vitals statistics about the area
* M100 F Identifies how much of the free memory block remains free and unused. It also
* detects and reports any corruption within the free memory block that may have
* happened due to errant firmware.
* M100 D Does a hex display of the free memory block along with a flag for any errant
* data that does not match the expected value.
* M100 C x Corrupts x locations within the free memory block. This is useful to check the
* correctness of the M100 F and M100 D commands.
*
* Initial version by Roxy-3DPrintBoard
*/
#define M100_FREE_MEMORY_DUMPER // Comment out to remove Dump sub-command
#define M100_FREE_MEMORY_CORRUPTOR // Comment out to remove Corrupt sub-command
// M100 Free Memory Watcher
//
// This code watches the free memory block between the bottom of the heap and the top of the stack.
// This memory block is initialized and watched via the M100 command.
//
// M100 I Initializes the free memory block and prints vitals statistics about the area
// M100 F Identifies how much of the free memory block remains free and unused. It also
// detects and reports any corruption within the free memory block that may have
// happened due to errant firmware.
// M100 D Does a hex display of the free memory block along with a flag for any errant
// data that does not match the expected value.
// M100 C x Corrupts x locations within the free memory block. This is useful to check the
// correctness of the M100 F and M100 D commands.
//
// Initial version by Roxy-3DPrintBoard
//
//
#include "Marlin.h"
#if ENABLED(M100_FREE_MEMORY_WATCHER)

2
Marlin/Marlin.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

4
Marlin/Marlin.ino
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* About Marlin
*
* This firmware is a mashup between Sprinter and grbl.

4
Marlin/MarlinSerial.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
HardwareSerial.cpp - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.

4
Marlin/MarlinSerial.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
HardwareSerial.h - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.

10
Marlin/Marlin_main.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
*
* About Marlin
*
@ -6618,7 +6618,7 @@ void clamp_to_software_endstops(float target[3]) {
- sq(delta_tower3_x - cartesian[X_AXIS])
- sq(delta_tower3_y - cartesian[Y_AXIS])
) + cartesian[Z_AXIS];
/*
/**
SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]);
SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]);
SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]);
@ -6653,7 +6653,7 @@ void clamp_to_software_endstops(float target[3]) {
delta[Y_AXIS] += offset;
delta[Z_AXIS] += offset;
/*
/**
SERIAL_ECHOPGM("grid_x="); SERIAL_ECHO(grid_x);
SERIAL_ECHOPGM(" grid_y="); SERIAL_ECHO(grid_y);
SERIAL_ECHOPGM(" floor_x="); SERIAL_ECHO(floor_x);
@ -7145,7 +7145,7 @@ void plan_arc(
delta[Y_AXIS] = (SCARA_theta + SCARA_psi) * SCARA_RAD2DEG; // - equal to sub arm angle (inverted motor)
delta[Z_AXIS] = cartesian[Z_AXIS];
/*
/**
SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]);
SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]);
SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]);

2
Marlin/SanityCheck.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

4
Marlin/Sd2Card.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*

4
Marlin/Sd2Card.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*

4
Marlin/Sd2PinMap.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2010 by William Greiman
*

4
Marlin/SdBaseFile.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*

4
Marlin/SdBaseFile.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*

4
Marlin/SdFatConfig.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*

6
Marlin/SdFatStructs.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
@ -37,7 +37,7 @@
* \file
* \brief FAT file structures
*/
/*
/**
* mostly from Microsoft document fatgen103.doc
* http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
*/

4
Marlin/SdFatUtil.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2008 by William Greiman
*

4
Marlin/SdFatUtil.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2008 by William Greiman
*

4
Marlin/SdFile.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*

4
Marlin/SdFile.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*

4
Marlin/SdInfo.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*

4
Marlin/SdVolume.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*

4
Marlin/SdVolume.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*

4
Marlin/blinkm.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* blinkm.cpp - Library for controlling a BlinkM over i2c
* Created by Tim Koster, August 21 2013.
*/

4
Marlin/blinkm.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* blinkm.h - Library for controlling a BlinkM over i2c
* Created by Tim Koster, August 21 2013.
*/

2
Marlin/boards.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/buzzer.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/buzzer.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

4
Marlin/cardreader.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -245,7 +245,7 @@ void CardReader::initsd() {
}
workDir = root;
curDir = &root;
/*
/**
if (!workDir.openRoot(&volume)) {
SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
}

2
Marlin/cardreader.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

4
Marlin/configuration_store.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* configuration_store.cpp
*
* Configuration and EEPROM storage

2
Marlin/configuration_store.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

72
Marlin/dac_mcp4728.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
*
* For implementation details, please take a look at the datasheet:
@ -30,18 +30,15 @@
* http://arduino.cc/forum/index.php/topic,51842.0.html
*/
/* _____PROJECT INCLUDES_____________________________________________________ */
#include "dac_mcp4728.h"
#if ENABLED(DAC_STEPPER_CURRENT)
// Used Global variables
uint16_t mcp4728_values[4];
/*
Begin I2C, get current values (input register and eeprom) of mcp4728
*/
/**
* Begin I2C, get current values (input register and eeprom) of mcp4728
*/
void mcp4728_init() {
Wire.begin();
Wire.requestFrom(int(DAC_DEV_ADDRESS), 24);
@ -58,19 +55,19 @@ void mcp4728_init() {
}
}
/*
Write input resister value to specified channel using fastwrite method.
Channel : 0-3, Values : 0-4095
*/
/**
* Write input resister value to specified channel using fastwrite method.
* Channel : 0-3, Values : 0-4095
*/
uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value) {
mcp4728_values[channel] = value;
return mcp4728_fastWrite();
}
/*
Write all input resistor values to EEPROM using SequencialWrite method.
This will update both input register and EEPROM value
This will also write current Vref, PowerDown, Gain settings to EEPROM
*/
/**
* Write all input resistor values to EEPROM using SequencialWrite method.
* This will update both input register and EEPROM value
* This will also write current Vref, PowerDown, Gain settings to EEPROM
*/
uint8_t mcp4728_eepromWrite() {
Wire.beginTransmission(DAC_DEV_ADDRESS);
Wire.send(SEQWRITE);
@ -81,31 +78,32 @@ uint8_t mcp4728_eepromWrite() {
return Wire.endTransmission();
}
/*
Write Voltage reference setting to all input regiters
*/
/**
* Write Voltage reference setting to all input regiters
*/
uint8_t mcp4728_setVref_all(uint8_t value) {
Wire.beginTransmission(DAC_DEV_ADDRESS);
Wire.send(VREFWRITE | value << 3 | value << 2 | value << 1 | value);
return Wire.endTransmission();
}
/*
Write Gain setting to all input regiters
*/
/**
* Write Gain setting to all input regiters
*/
uint8_t mcp4728_setGain_all(uint8_t value) {
Wire.beginTransmission(DAC_DEV_ADDRESS);
Wire.send(GAINWRITE | value << 3 | value << 2 | value << 1 | value);
return Wire.endTransmission();
}
/*
Return Input Regiter value
*/
/**
* Return Input Regiter value
*/
uint16_t mcp4728_getValue(uint8_t channel) { return mcp4728_values[channel]; }
/*
// Steph: Might be useful in the future
// Return Vout
/**
* Steph: Might be useful in the future
* Return Vout
*
uint16_t mcp4728_getVout(uint8_t channel) {
uint32_t vref = 2048;
uint32_t vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096;
@ -114,11 +112,11 @@ uint16_t mcp4728_getVout(uint8_t channel) {
}
*/
/*
FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1
DAC Input and PowerDown bits update.
No EEPROM update
*/
/**
* FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1
* DAC Input and PowerDown bits update.
* No EEPROM update
*/
uint8_t mcp4728_fastWrite() {
Wire.beginTransmission(DAC_DEV_ADDRESS);
for (uint8_t channel=0; channel <= 3; channel++) {
@ -128,9 +126,9 @@ uint8_t mcp4728_fastWrite() {
return Wire.endTransmission();
}
/*
Common function for simple general commands
*/
/**
* Common function for simple general commands
*/
uint8_t mcp4728_simpleCommand(byte simpleCommand) {
Wire.beginTransmission(GENERALCALL);
Wire.send(simpleCommand);

4
Marlin/dac_mcp4728.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* Arduino library for MicroChip MCP4728 I2C D/A converter.
*/

2
Marlin/digipot_mcp4451.cpp
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

4
Marlin/dogm_bitmaps.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
* BitMap for splashscreen
* Generated with: http://www.digole.com/tools/PicturetoC_Hex_converter.php
* Please note that using the high-res version takes 402Bytes of PROGMEM.

4
Marlin/dogm_font_data_6x9_marlin.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
Fontname: -Misc-Fixed-Medium-R-Normal--9-90-75-75-C-60-ISO10646-1
Copyright: Public domain font. Share and enjoy.
Capital A Height: 6, '1' Height: 6

4
Marlin/dogm_font_data_HD44780_C.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
Fontname: HD44780_C v1.2
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7

4
Marlin/dogm_font_data_HD44780_J.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
Fontname: HD44780_J
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7

4
Marlin/dogm_font_data_HD44780_W.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
Fontname: HD44780_W
Copyright: A.Hardtung, public domain
Capital A Height: 7, '1' Height: 7

4
Marlin/dogm_font_data_ISO10646_1.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
Fontname: ISO10646-1
Copyright: A.Hardtung, public domain
Capital A Height: 7, '1' Height: 7

4
Marlin/dogm_font_data_ISO10646_5_Cyrillic.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
Fontname: ISO10646_5_Cyrillic
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7

4
Marlin/dogm_font_data_ISO10646_CN.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
Fontname: ISO10646_CN
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7

4
Marlin/dogm_font_data_ISO10646_Kana.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
Fontname: ISO10646_Kana
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7

4
Marlin/dogm_font_data_Marlin_symbols.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
Fontname: Marlin_symbols
Copyright: Created with Fony 1.4.7
Capital A Height: 0, '1' Height: 0

2
Marlin/dogm_lcd_implementation.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

29
Marlin/example_configurations/Felix/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

29
Marlin/example_configurations/Felix/Configuration_DUAL.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/Felix/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/Hephestos/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/Hephestos/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/Hephestos_2/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

39
Marlin/example_configurations/K8200/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,11 +20,28 @@
*
*/
// Sample configuration file for Vellemann K8200
// tested on K8200 with VM8201 (Display)
// and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
// https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
/**
* Sample configuration file for Vellemann K8200
* tested on K8200 with VM8201 (Display)
* and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
* https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -34,8 +51,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -43,11 +62,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

13
Marlin/example_configurations/K8200/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -25,6 +25,17 @@
// and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
// https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

29
Marlin/example_configurations/RigidBot/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/RigidBot/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/SCARA/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/SCARA/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/TAZ4/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/TAZ4/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/WITBOX/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/WITBOX/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

29
Marlin/example_configurations/delta/biv2.5/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/delta/generic/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/delta/generic/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

37
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,10 +20,27 @@
*
*/
// Example configuration file for OpenBeam Kossel Pro
// tested on 2015-05-19 by @Wackerbarth
// using Arduino 1.6.5 (Mac)
/**
* Example configuration file for OpenBeam Kossel Pro
* tested on 2015-05-19 by @Wackerbarth
* using Arduino 1.6.5 (Mac)
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -33,8 +50,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -42,11 +61,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

13
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -24,6 +24,17 @@
// tested on 2015-05-19 by @Wackerbarth
// using Arduino 1.6.5 (Mac)
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/makibox/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/makibox/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

29
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,21 @@
*
*/
/**
* Configuration.h
*
* Basic settings such as:
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
@ -29,8 +44,10 @@
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
/*
Here are some standard links for getting your machine calibrated:
/**
* Here are some standard links for getting your machine calibrated:
*
* http://reprap.org/wiki/Calibration
* http://youtu.be/wAL9d7FgInk
* http://calculator.josefprusa.cz
@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated:
* http://www.thingiverse.com/thing:5573
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http://www.thingiverse.com/thing:298812
*/
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
*/
//===========================================================================
//============================= DELTA Printer ===============================

12
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,6 +20,16 @@
*
*/
/**
* Configuration_adv.h
*
* Advanced settings.
* Only change these if you know exactly what you're doing.
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H

22
Marlin/fastio.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -20,7 +20,7 @@
*
*/
/*
/**
This code contributed by Triffid_Hunter and modified by Kliment
why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/
@ -30,7 +30,7 @@
#include <avr/io.h>
/*
/**
utility functions
*/
@ -38,7 +38,7 @@
#define MASK(PIN) (1 << PIN)
#endif
/*
/**
magic I/O routines
now you can simply SET_OUTPUT(STEP); WRITE(STEP, 1); WRITE(STEP, 0);
*/
@ -107,7 +107,7 @@
// Shorthand
#define OUT_WRITE(IO, v) { SET_OUTPUT(IO); WRITE(IO, v); }
/*
/**
ports and functions
added as necessary or if I feel like it- not a comprehensive list!
@ -138,7 +138,7 @@
#define DEBUG_LED AIO5
/*
/**
pins
*/
@ -477,7 +477,7 @@
#define OC2B DIO14
#define DEBUG_LED DIO0
/*
/**
pins
*/
@ -986,7 +986,7 @@
// change for your board
#define DEBUG_LED DIO21
/*
/**
pins
*/
#define DIO0_PIN PINE0
@ -2056,7 +2056,7 @@
// change for your board
#define DEBUG_LED DIO31 /* led D5 red */
/*
/**
pins
*/
@ -2698,7 +2698,7 @@
#else // AT90USBxx_TEENSYPP_ASSIGNMENTS -- Use Teensyduino Teensy++2.0 assignments.
/*
/**
AT90USB 51 50 49 48 47 46 45 44 10 11 12 13 14 15 16 17 35 36 37 38 39 40 41 42 25 26 27 28 29 30 31 32 33 34 43 09 18 19 01 02 61 60 59 58 57 56 55 54
Port A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7
@ -3373,7 +3373,7 @@
// change for your board
#define DEBUG_LED DIO46
/*
/**
pins
*/
#define DIO0_PIN PINE0

2
Marlin/language.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_an.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_bg.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_ca.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_cn.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_cz.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_da.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_de.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_en.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_es.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_eu.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_fi.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_fr.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_gl.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_it.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_kana.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_kana_utf8.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

2
Marlin/language_nl.h
View File

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*

Some files were not shown because too many files have changed in this diff Show More