diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index 24404c8555f..ce7becf0479 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -932,6 +932,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index 59f42da893b..8aacd1fa1af 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index 4ac60c6e3f9..4653910010e 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -1022,6 +1022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index f1cead72ab0..8cfb91e5791 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -919,6 +919,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index f0f67de4c16..3e7c40e88fe 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index aff69197728..0fb4a822865 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index de928339696..e9198a70da2 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index 9a86568a68f..b4b486d19d9 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -900,6 +900,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 201a04ebe23..dde324069fb 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -898,6 +898,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index 1a386a8b4b3..4b800d8f5cb 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -900,6 +900,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index 58eacfddd42..6589a250338 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -911,6 +911,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index 3a9834faff5..71ea04793a0 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -922,6 +922,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index 5b5885370af..c86eaa18eb2 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -904,6 +904,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h index 2cb789e80dd..cea3412da58 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h @@ -931,6 +931,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration.h b/Marlin/src/config/examples/Creality/Ender/Configuration.h index 9cda5a52101..7df048085fc 100644 --- a/Marlin/src/config/examples/Creality/Ender/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender/Configuration.h @@ -907,6 +907,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index b46051d3430..ce1494e84d1 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -894,6 +894,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 4434d5b09d2..295459fcc5b 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -894,6 +894,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index 90655512902..36af811cf7e 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -918,6 +918,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index f9fc66e2d33..100da5e4bab 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -927,6 +927,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index aa3e1608f7a..929ea47c1f9 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index d9521fe21c3..3e8389802f3 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -919,6 +919,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 49065f85b03..a0af8ee7086 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -918,6 +918,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index 9ad2cefbbdc..35187d90aca 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -916,6 +916,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 1abc4f83b1b..e3d0b66654a 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -924,6 +924,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index 4887deace94..8effde21693 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -932,6 +932,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index b85ecbea102..692eb1a82d5 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -940,6 +940,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index b676c2b1a76..f84d120aadf 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -911,6 +911,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index de59235b22c..c3de82d3e58 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -916,6 +916,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index 452b42ea7d0..1aa1c6f0ba5 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -916,6 +916,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index ae8ffda0c45..7fd2cf7b511 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index 348f4b82a65..a4d3606033a 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index 4111793bc34..e00a92d60ff 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -910,6 +910,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index fcc2e7b415d..de211ff10e4 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -924,6 +924,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index 4617dcee23c..85d857797b7 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -915,6 +915,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index 538c6007494..71e0363f551 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -943,6 +943,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index 833715b1d9a..3dbe58b366d 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index 77f2437ed28..a0d98b01265 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -968,6 +968,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index fe494ae7070..6d2466444ec 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -903,6 +903,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index 465d717abcd..2d8e21bf864 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index dee561d4807..d305200fd6e 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -923,6 +923,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index 286baaf570c..ca6ed17565b 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -903,6 +903,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index 5984775eb5c..22e0789861b 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -942,6 +942,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index a6303c8d745..8573366ac8f 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index fb7a34cf5d6..341dd1367b9 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index 2c900678f5f..abd4c1a2fc6 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -913,6 +913,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index 6338967a3d2..43bbb54d011 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 26ee3f82509..cbc546cff24 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1042,6 +1042,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index a15e8857548..8abc72dc080 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1033,6 +1033,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 1a9ab7101a0..51d0d64edb4 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1042,6 +1042,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h index 0598a3a4d34..c79d6e8213a 100644 --- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1045,6 +1045,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index d10edb27683..5e3de46512d 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -1029,6 +1029,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 537ee791b19..f44de6ee0b4 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -1032,6 +1032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index 865505eb53a..d429fa0013c 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -1032,6 +1032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index dd9ff1c6518..a094fdc4ab0 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -1041,6 +1041,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index ce18c8ab9c0..ba34d31538e 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -926,6 +926,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index c6242369a16..9e9c6596a45 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -915,6 +915,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index f89b6b002de..3de98375d2b 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -913,6 +913,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index ac058e2d288..8c563965328 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -907,6 +907,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index 7c433eaed14..f63a474ede9 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -917,6 +917,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'.