3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-30 07:17:59 +00:00
Code Issues Releases Wiki Activity

📺 Melzi v4 with BTT SKR Mini E3 (#25321)

Browse Source
This commit is contained in:
kg333 2023-02-01 19:02:26 -05:00 committed by Scott Lahteine
parent 6e427350db
commit 1a184e5a82
1 changed files with 33 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
View File

@ -163,8 +163,8 @@
#if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN EXP1_01_PIN
#define BTN_ENC EXP1_02_PIN
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
@ -172,6 +172,37 @@
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#elif ENABLED(LCD_FOR_MELZI)
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! LCD for Melzi v4 display requires a custom cable. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/**
* LCD for Melzi v4 needs a custom cable with reversed GND/5V pins; plugging in a standard cable may damage the board or LCD!
* 1. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!)
* 2. Swap pin 4 on the Melzi LCD to pin 7 on the SKR Mini E3 EXP1 connector (pin 4 on the SKR is a RESET and cannot be used)
*
* LCD for Melzi V4 SKR Mini E3 V2.0
* ------ ------
* LCD RS | 1 2 | EN1 LCD RS | 1 2 | EN1
* LCD EN | 3 4 | EN2 LCD EN | 3 4 | OPEN (RESET)
* LCD D4 | 5 6 | ENC LCD D4 | 5 6 | ENC
* E-Stop | 7 8 | BEEP EN2 | 7 8 | BEEP
* 5V | 9 10 | GND GND | 9 10 | 5V
* ------ ------
* EXP1 EXP1
*/
#define BEEPER_PIN EXP1_08_PIN
#define BTN_ENC EXP1_06_PIN
#define BTN_EN1 EXP1_02_PIN
#define BTN_EN2 EXP1_07_PIN
#define LCD_PINS_RS EXP1_01_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
@ -306,7 +337,7 @@
#define FORCE_SOFT_SPI
#else
#error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, TFTGLCD_PANEL_(SPI|I2C), FYSETC_MINI_12864_2_1, MKS_MINI_12864_V3, and BTT_MINI_12864_V1 are currently supported on the BIGTREE_SKR_MINI_E3."
#error "Only CR10_STOCKDISPLAY, LCD_FOR_MELZI, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, TFTGLCD_PANEL_(SPI|I2C), FYSETC_MINI_12864_2_1, MKS_MINI_12864_V3, and BTT_MINI_12864_V1 are currently supported on the BIGTREE_SKR_MINI_E3."
#endif
#endif // HAS_WIRED_LCD