mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-30 07:17:59 +00:00
✨ Creality v5.2.1 board (#24760)
This commit is contained in:
Plynix / Ben Hartiwch
GitHub
parent
e14faf0413
commit
1b3941c0d2
@ -355,20 +355,21 @@
|
|||||||
#define BOARD_CREALITY_V431_D 4051 // Creality v4.3.1d (STM32F103RC / STM32F103RE)
|
#define BOARD_CREALITY_V431_D 4051 // Creality v4.3.1d (STM32F103RC / STM32F103RE)
|
||||||
#define BOARD_CREALITY_V452 4052 // Creality v4.5.2 (STM32F103RC / STM32F103RE)
|
#define BOARD_CREALITY_V452 4052 // Creality v4.5.2 (STM32F103RC / STM32F103RE)
|
||||||
#define BOARD_CREALITY_V453 4053 // Creality v4.5.3 (STM32F103RC / STM32F103RE)
|
#define BOARD_CREALITY_V453 4053 // Creality v4.5.3 (STM32F103RC / STM32F103RE)
|
||||||
#define BOARD_CREALITY_V24S1 4054 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
|
#define BOARD_CREALITY_V521 4054 // SV04 Board
|
||||||
#define BOARD_CREALITY_V24S1_301 4055 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
|
#define BOARD_CREALITY_V24S1 4055 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
|
||||||
#define BOARD_CREALITY_V25S1 4056 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
|
#define BOARD_CREALITY_V24S1_301 4056 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
|
||||||
#define BOARD_TRIGORILLA_PRO 4057 // Trigorilla Pro (STM32F103ZE)
|
#define BOARD_CREALITY_V25S1 4057 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
|
||||||
#define BOARD_FLY_MINI 4058 // FLYmaker FLY MINI (STM32F103RC)
|
#define BOARD_TRIGORILLA_PRO 4058 // Trigorilla Pro (STM32F103ZE)
|
||||||
#define BOARD_FLSUN_HISPEED 4059 // FLSUN HiSpeedV1 (STM32F103VE)
|
#define BOARD_FLY_MINI 4059 // FLYmaker FLY MINI (STM32F103RC)
|
||||||
#define BOARD_BEAST 4060 // STM32F103RE Libmaple-based controller
|
#define BOARD_FLSUN_HISPEED 4060 // FLSUN HiSpeedV1 (STM32F103VE)
|
||||||
#define BOARD_MINGDA_MPX_ARM_MINI 4061 // STM32F103ZE Mingda MD-16
|
#define BOARD_BEAST 4061 // STM32F103RE Libmaple-based controller
|
||||||
#define BOARD_GTM32_PRO_VD 4062 // STM32F103VE controller
|
#define BOARD_MINGDA_MPX_ARM_MINI 4062 // STM32F103ZE Mingda MD-16
|
||||||
#define BOARD_ZONESTAR_ZM3E2 4063 // Zonestar ZM3E2 (STM32F103RC)
|
#define BOARD_GTM32_PRO_VD 4063 // STM32F103VE controller
|
||||||
#define BOARD_ZONESTAR_ZM3E4 4064 // Zonestar ZM3E4 V1 (STM32F103VC)
|
#define BOARD_ZONESTAR_ZM3E2 4064 // Zonestar ZM3E2 (STM32F103RC)
|
||||||
#define BOARD_ZONESTAR_ZM3E4V2 4065 // Zonestar ZM3E4 V2 (STM32F103VC)
|
#define BOARD_ZONESTAR_ZM3E4 4065 // Zonestar ZM3E4 V1 (STM32F103VC)
|
||||||
#define BOARD_ERYONE_ERY32_MINI 4066 // Eryone Ery32 mini (STM32F103VE)
|
#define BOARD_ZONESTAR_ZM3E4V2 4066 // Zonestar ZM3E4 V2 (STM32F103VC)
|
||||||
#define BOARD_PANDA_PI_V29 4067 // Panda Pi V2.9 - Standalone (STM32F103RC)
|
#define BOARD_ERYONE_ERY32_MINI 4067 // Eryone Ery32 mini (STM32F103VE)
|
||||||
|
#define BOARD_PANDA_PI_V29 4068 // Panda Pi V2.9 - Standalone (STM32F103RC)
|
||||||
|
|
||||||
//
|
//
|
||||||
// ARM Cortex-M4F
|
// ARM Cortex-M4F
|
||||||
|
|||||||
@ -1,9 +1,9 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU General Public License as published by
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
|||||||
@ -1,9 +1,9 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU General Public License as published by
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
|||||||
@ -43,6 +43,7 @@
|
|||||||
#if NO_EEPROM_SELECTED
|
#if NO_EEPROM_SELECTED
|
||||||
//#define I2C_EEPROM // EEPROM on I2C-0
|
//#define I2C_EEPROM // EEPROM on I2C-0
|
||||||
//#define SDCARD_EEPROM_EMULATION
|
//#define SDCARD_EEPROM_EMULATION
|
||||||
|
//#undef NO_EEPROM_SELECTED
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if ENABLED(I2C_EEPROM)
|
#if ENABLED(I2C_EEPROM)
|
||||||
|
|||||||
@ -611,6 +611,8 @@
|
|||||||
#include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F103VET6 env:ERYONE_ERY32_MINI_maple
|
#include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F103VET6 env:ERYONE_ERY32_MINI_maple
|
||||||
#elif MB(PANDA_PI_V29)
|
#elif MB(PANDA_PI_V29)
|
||||||
#include "stm32f1/pins_PANDA_PI_V29.h" // STM32F103RCT6 env:PANDA_PI_V29
|
#include "stm32f1/pins_PANDA_PI_V29.h" // STM32F103RCT6 env:PANDA_PI_V29
|
||||||
|
#elif MB(CREALITY_V521)
|
||||||
|
#include "stm32f1/pins_CREALITY_V521.h" // STM32F103RET6 env:STM32F103RET6_creality
|
||||||
|
|
||||||
//
|
//
|
||||||
// ARM Cortex-M4F
|
// ARM Cortex-M4F
|
||||||
|
|||||||
@ -161,9 +161,7 @@
|
|||||||
#define SDIO_SUPPORT
|
#define SDIO_SUPPORT
|
||||||
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
|
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
|
||||||
|
|
||||||
#if EITHER(CR10_STOCKDISPLAY, FYSETC_MINI_12864_2_1)
|
#if ANY(RET6_12864_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
|
||||||
|
|
||||||
#if ENABLED(RET6_12864_LCD)
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* RET6 12864 LCD
|
* RET6 12864 LCD
|
||||||
@ -174,18 +172,17 @@
|
|||||||
* PB12 | 7 8 | PB15
|
* PB12 | 7 8 | PB15
|
||||||
* GND | 9 10 | 5V
|
* GND | 9 10 | 5V
|
||||||
* ------
|
* ------
|
||||||
* EXP1
|
|
||||||
*/
|
*/
|
||||||
#define EXP1_01_PIN PC6
|
#define EXP3_01_PIN PC6
|
||||||
#define EXP1_02_PIN PB2
|
#define EXP3_02_PIN PB2
|
||||||
#define EXP1_03_PIN PB10
|
#define EXP3_03_PIN PB10
|
||||||
#define EXP1_04_PIN PB11
|
#define EXP3_04_PIN PB11
|
||||||
#define EXP1_05_PIN PB14
|
#define EXP3_05_PIN PB14
|
||||||
#define EXP1_06_PIN PB13
|
#define EXP3_06_PIN PB13
|
||||||
#define EXP1_07_PIN PB12
|
#define EXP3_07_PIN PB12
|
||||||
#define EXP1_08_PIN PB15
|
#define EXP3_08_PIN PB15
|
||||||
|
|
||||||
#elif ENABLED(VET6_12864_LCD)
|
#elif EITHER(VET6_12864_LCD, DWIN_VET6_CREALITY_LCD)
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* VET6 12864 LCD
|
* VET6 12864 LCD
|
||||||
@ -196,59 +193,42 @@
|
|||||||
* PA4 | 7 8 | PA7
|
* PA4 | 7 8 | PA7
|
||||||
* GND | 9 10 | 5V
|
* GND | 9 10 | 5V
|
||||||
* ------
|
* ------
|
||||||
* EXP1
|
|
||||||
*/
|
*/
|
||||||
#define EXP1_01_PIN -1
|
#define EXP3_01_PIN -1
|
||||||
#define EXP1_02_PIN PC5
|
#define EXP3_02_PIN PC5
|
||||||
#define EXP1_03_PIN PB10
|
#define EXP3_03_PIN PB10
|
||||||
#define EXP1_04_PIN -1
|
#define EXP3_04_PIN -1
|
||||||
#define EXP1_05_PIN PA6
|
#define EXP3_05_PIN PA6
|
||||||
#define EXP1_06_PIN PA5
|
#define EXP3_06_PIN PA5
|
||||||
#define EXP1_07_PIN PA4
|
#define EXP3_07_PIN PA4
|
||||||
#define EXP1_08_PIN PA7
|
#define EXP3_08_PIN PA7
|
||||||
|
|
||||||
#else
|
#elif EITHER(CR10_STOCKDISPLAY, FYSETC_MINI_12864_2_1)
|
||||||
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for the LCD with the Creality V4 controller."
|
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for the LCD with the Creality V4 controller."
|
||||||
#endif
|
#endif
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(CR10_STOCKDISPLAY)
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
|
||||||
#define LCD_PINS_RS EXP1_07_PIN
|
#define LCD_PINS_RS EXP3_07_PIN
|
||||||
#define LCD_PINS_ENABLE EXP1_08_PIN
|
#define LCD_PINS_ENABLE EXP3_08_PIN
|
||||||
#define LCD_PINS_D4 EXP1_06_PIN
|
#define LCD_PINS_D4 EXP3_06_PIN
|
||||||
|
|
||||||
#define BTN_ENC EXP1_02_PIN
|
#define BTN_ENC EXP3_02_PIN
|
||||||
#define BTN_EN1 EXP1_03_PIN
|
#define BTN_EN1 EXP3_03_PIN
|
||||||
#define BTN_EN2 EXP1_05_PIN
|
#define BTN_EN2 EXP3_05_PIN
|
||||||
|
|
||||||
#ifndef HAS_PIN_27_BOARD
|
#ifndef HAS_PIN_27_BOARD
|
||||||
#define BEEPER_PIN EXP1_01_PIN
|
#define BEEPER_PIN EXP3_01_PIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#elif ANY(HAS_DWIN_E3V2, IS_DWIN_MARLINUI, DWIN_VET6_CREALITY_LCD)
|
#elif ANY(HAS_DWIN_E3V2, IS_DWIN_MARLINUI, DWIN_VET6_CREALITY_LCD)
|
||||||
|
|
||||||
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
|
#define BTN_ENC EXP3_05_PIN
|
||||||
// RET6 DWIN ENCODER LCD
|
#define BTN_EN1 EXP3_08_PIN
|
||||||
#define EXP1_05_PIN PB14
|
#define BTN_EN2 EXP3_07_PIN
|
||||||
#define EXP1_06_PIN PB13
|
|
||||||
#define EXP1_07_PIN PB12
|
|
||||||
#define EXP1_08_PIN PB15
|
|
||||||
//#define LCD_LED_PIN PB2
|
|
||||||
#else
|
|
||||||
// VET6 DWIN ENCODER LCD
|
|
||||||
#define EXP1_05_PIN PA6
|
|
||||||
#define EXP1_06_PIN PA5
|
|
||||||
#define EXP1_07_PIN PA4
|
|
||||||
#define EXP1_08_PIN PA7
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define BTN_ENC EXP1_05_PIN
|
|
||||||
#define BTN_EN1 EXP1_08_PIN
|
|
||||||
#define BTN_EN2 EXP1_07_PIN
|
|
||||||
|
|
||||||
#ifndef BEEPER_PIN
|
#ifndef BEEPER_PIN
|
||||||
#define BEEPER_PIN EXP1_06_PIN
|
#define BEEPER_PIN EXP3_06_PIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||||
@ -258,7 +238,7 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if SD_CONNECTION_IS(LCD)
|
#if SD_CONNECTION_IS(LCD)
|
||||||
#error "The LCD sdcard is not connected with this configuration"
|
#error "The LCD SD Card is not connected with this configuration."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/**
|
/**
|
||||||
@ -283,20 +263,20 @@
|
|||||||
* Debug port EXP2
|
* Debug port EXP2
|
||||||
*
|
*
|
||||||
* Needs custom cable. Connect EN2-EN2, LCD_CS-LCD_CS and so on.
|
* Needs custom cable. Connect EN2-EN2, LCD_CS-LCD_CS and so on.
|
||||||
* Debug port is just above EXP1, You need to add pins
|
* Debug port is just above EXP1. You need to add pins.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#define BTN_ENC EXP1_02_PIN
|
#define BTN_ENC EXP3_02_PIN
|
||||||
#define BTN_EN1 EXP1_01_PIN
|
#define BTN_EN1 EXP3_01_PIN
|
||||||
#define BTN_EN2 EXP1_06_PIN
|
#define BTN_EN2 EXP3_06_PIN
|
||||||
#define BEEPER_PIN -1
|
#define BEEPER_PIN -1
|
||||||
|
|
||||||
#define DOGLCD_CS EXP1_03_PIN
|
#define DOGLCD_CS EXP3_03_PIN
|
||||||
#define DOGLCD_A0 EXP1_05_PIN
|
#define DOGLCD_A0 EXP3_05_PIN
|
||||||
#define DOGLCD_SCK EXP1_07_PIN
|
#define DOGLCD_SCK EXP3_07_PIN
|
||||||
#define DOGLCD_MOSI EXP1_08_PIN
|
#define DOGLCD_MOSI EXP3_08_PIN
|
||||||
#define LCD_RESET_PIN EXP1_04_PIN
|
#define LCD_RESET_PIN EXP3_04_PIN
|
||||||
|
|
||||||
#define FORCE_SOFT_SPI
|
#define FORCE_SOFT_SPI
|
||||||
#define LCD_BACKLIGHT_PIN -1
|
#define LCD_BACKLIGHT_PIN -1
|
||||||
|
|||||||
@ -1,9 +1,9 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU General Public License as published by
|
* it under the terms of the GNU General Public License as published by
|
||||||
@ -22,7 +22,7 @@
|
|||||||
#pragma once
|
#pragma once
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* CREALITY 4.2.10 (STM32F103RE / STM32F103RC) board pin assignments
|
* Creality 4.2.10 (STM32F103RE / STM32F103RC) board pin assignments
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include "env_validate.h"
|
#include "env_validate.h"
|
||||||
@ -143,9 +143,7 @@
|
|||||||
#define SDIO_SUPPORT
|
#define SDIO_SUPPORT
|
||||||
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
|
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
|
||||||
|
|
||||||
#if ENABLED(CR10_STOCKDISPLAY)
|
#if ANY(RET6_12864_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
|
||||||
|
|
||||||
#if ENABLED(RET6_12864_LCD)
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* RET6 12864 LCD
|
* RET6 12864 LCD
|
||||||
@ -156,20 +154,17 @@
|
|||||||
* PB12 | 7 8 | PB15
|
* PB12 | 7 8 | PB15
|
||||||
* GND | 9 10 | 5V
|
* GND | 9 10 | 5V
|
||||||
* ------
|
* ------
|
||||||
* EXP1
|
|
||||||
*/
|
*/
|
||||||
#define EXP1_01_PIN PC6
|
#define EXP3_01_PIN PC6
|
||||||
#define EXP1_02_PIN PB2
|
#define EXP3_02_PIN PB2
|
||||||
#define EXP1_03_PIN PB10
|
#define EXP3_03_PIN PB10
|
||||||
#define EXP1_04_PIN PE8
|
#define EXP3_04_PIN PE8
|
||||||
#define EXP1_05_PIN PB14
|
#define EXP3_05_PIN PB14
|
||||||
#define EXP1_06_PIN PB13
|
#define EXP3_06_PIN PB13
|
||||||
#define EXP1_07_PIN PB12
|
#define EXP3_07_PIN PB12
|
||||||
#define EXP1_08_PIN PB15
|
#define EXP3_08_PIN PB15
|
||||||
|
|
||||||
#define BEEPER_PIN EXP1_01_PIN
|
#elif EITHER(VET6_12864_LCD, DWIN_VET6_CREALITY_LCD)
|
||||||
|
|
||||||
#elif ENABLED(VET6_12864_LCD)
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* VET6 12864 LCD
|
* VET6 12864 LCD
|
||||||
@ -180,48 +175,43 @@
|
|||||||
* PA4 | 7 8 | PA7
|
* PA4 | 7 8 | PA7
|
||||||
* GND | 9 10 | 5V
|
* GND | 9 10 | 5V
|
||||||
* ------
|
* ------
|
||||||
* EXP1
|
|
||||||
*/
|
*/
|
||||||
#define EXP1_01_PIN -1
|
#define EXP3_01_PIN -1
|
||||||
#define EXP1_02_PIN PC5
|
#define EXP3_02_PIN PC5
|
||||||
#define EXP1_03_PIN PB10
|
#define EXP3_03_PIN PB10
|
||||||
#define EXP1_04_PIN -1
|
#define EXP3_04_PIN -1
|
||||||
#define EXP1_05_PIN PA6
|
#define EXP3_05_PIN PA6
|
||||||
#define EXP1_06_PIN PA5
|
#define EXP3_06_PIN PA5
|
||||||
#define EXP1_07_PIN PA4
|
#define EXP3_07_PIN PA4
|
||||||
#define EXP1_08_PIN PA7
|
#define EXP3_08_PIN PA7
|
||||||
|
|
||||||
#else
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
#if NONE(RET6_12864_LCD, VET6_12864_LCD)
|
||||||
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."
|
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define LCD_PINS_RS EXP1_07_PIN
|
#define LCD_PINS_RS EXP3_07_PIN
|
||||||
#define LCD_PINS_ENABLE EXP1_08_PIN
|
#define LCD_PINS_ENABLE EXP3_08_PIN
|
||||||
#define LCD_PINS_D4 EXP1_06_PIN
|
#define LCD_PINS_D4 EXP3_06_PIN
|
||||||
|
|
||||||
#define BTN_ENC EXP1_02_PIN
|
#define BTN_ENC EXP3_02_PIN
|
||||||
#define BTN_EN1 EXP1_03_PIN
|
#define BTN_EN1 EXP3_03_PIN
|
||||||
#define BTN_EN2 EXP1_05_PIN
|
#define BTN_EN2 EXP3_05_PIN
|
||||||
|
|
||||||
#elif HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
|
#define BEEPER_PIN EXP3_01_PIN
|
||||||
|
|
||||||
// RET6 DWIN ENCODER LCD
|
#elif ANY(DWIN_VET6_CREALITY_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
|
||||||
#define BTN_ENC PB14
|
|
||||||
#define BTN_EN1 PB15
|
|
||||||
#define BTN_EN2 PB12
|
|
||||||
|
|
||||||
//#define LCD_LED_PIN PB2
|
// RET6 / VET6 DWIN ENCODER LCD
|
||||||
|
#define BTN_ENC EXP3_05_PIN
|
||||||
|
#define BTN_EN1 EXP3_08_PIN
|
||||||
|
#define BTN_EN2 EXP3_07_PIN
|
||||||
|
|
||||||
|
//#define LCD_LED_PIN EXP3_02_PIN
|
||||||
#ifndef BEEPER_PIN
|
#ifndef BEEPER_PIN
|
||||||
#define BEEPER_PIN PB13
|
#define BEEPER_PIN EXP3_06_PIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#elif ENABLED(DWIN_VET6_CREALITY_LCD)
|
|
||||||
|
|
||||||
// VET6 DWIN ENCODER LCD
|
|
||||||
#define BTN_ENC PA6
|
|
||||||
#define BTN_EN1 PA7
|
|
||||||
#define BTN_EN2 PA4
|
|
||||||
|
|
||||||
#define BEEPER_PIN PA5
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|||||||
@ -1,9 +1,9 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU General Public License as published by
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
|||||||
226
Marlin/src/pins/stm32f1/pins_CREALITY_V521.h
Normal file
226
Marlin/src/pins/stm32f1/pins_CREALITY_V521.h
Normal file
@ -0,0 +1,226 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Creality 5.2.1 (STM32F103RE) board pin assignments
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "env_validate.h"
|
||||||
|
|
||||||
|
#if HOTENDS > 2 || E_STEPPERS > 2
|
||||||
|
#error "Creality v5.2.1 supports up to 2 hotends / E steppers."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef BOARD_INFO_NAME
|
||||||
|
#define BOARD_INFO_NAME "Creality V521"
|
||||||
|
#endif
|
||||||
|
#ifndef DEFAULT_MACHINE_NAME
|
||||||
|
#define DEFAULT_MACHINE_NAME "Creality V5.2.1"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// EEPROM
|
||||||
|
//
|
||||||
|
#if NO_EEPROM_SELECTED
|
||||||
|
// FLASH
|
||||||
|
//#define FLASH_EEPROM_EMULATION
|
||||||
|
|
||||||
|
// I2C
|
||||||
|
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 used only for display settings
|
||||||
|
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||||
|
#define IIC_EEPROM_SDA PC2
|
||||||
|
#define IIC_EEPROM_SCL PC3
|
||||||
|
#define MARLIN_EEPROM_SIZE 0x800 // 2K (24C16)
|
||||||
|
#else
|
||||||
|
#define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX
|
||||||
|
#define MARLIN_EEPROM_SIZE 0x800 // 2K
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#undef NO_EEPROM_SELECTED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Servos
|
||||||
|
//
|
||||||
|
#define SERVO0_PIN PD13 // BLTouch OUT
|
||||||
|
|
||||||
|
//
|
||||||
|
// Limit Switches
|
||||||
|
//
|
||||||
|
#define X_STOP_PIN PD10 // X
|
||||||
|
#define X2_STOP_PIN PE15 // X2
|
||||||
|
#define Y_STOP_PIN PE0 // Y
|
||||||
|
#define Z_STOP_PIN PE1 // Z
|
||||||
|
#define Z2_STOP_PIN PE2 // Z2
|
||||||
|
|
||||||
|
#ifndef Z_MIN_PROBE_PIN
|
||||||
|
#define Z_MIN_PROBE_PIN PD12 // BLTouch IN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Filament Runout Sensor
|
||||||
|
//
|
||||||
|
#define FIL_RUNOUT_PIN PE5 // "Pulled-high"
|
||||||
|
#define FIL_RUNOUT2_PIN PE6 // "Pulled-high"
|
||||||
|
|
||||||
|
//
|
||||||
|
// Steppers
|
||||||
|
//
|
||||||
|
#define X_ENABLE_PIN PC7
|
||||||
|
#define X_STEP_PIN PD15
|
||||||
|
#define X_DIR_PIN PD14
|
||||||
|
|
||||||
|
#define Y_ENABLE_PIN PB9
|
||||||
|
#define Y_STEP_PIN PB7
|
||||||
|
#define Y_DIR_PIN PB6
|
||||||
|
|
||||||
|
#define Z_ENABLE_PIN PB5
|
||||||
|
#define Z_STEP_PIN PB3
|
||||||
|
#define Z_DIR_PIN PD7
|
||||||
|
|
||||||
|
#define E0_ENABLE_PIN PD4
|
||||||
|
#define E0_STEP_PIN PD1
|
||||||
|
#define E0_DIR_PIN PD0
|
||||||
|
|
||||||
|
#define E1_ENABLE_PIN PE7
|
||||||
|
#define E1_STEP_PIN PB1
|
||||||
|
#define E1_DIR_PIN PB0
|
||||||
|
|
||||||
|
#define X2_ENABLE_PIN PE11
|
||||||
|
#define X2_STEP_PIN PE9
|
||||||
|
#define X2_DIR_PIN PE8
|
||||||
|
|
||||||
|
#define Z2_ENABLE_PIN PC5
|
||||||
|
#define Z2_STEP_PIN PA7
|
||||||
|
#define Z2_DIR_PIN PA6
|
||||||
|
|
||||||
|
//
|
||||||
|
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
||||||
|
//
|
||||||
|
#define DISABLE_JTAG
|
||||||
|
|
||||||
|
//
|
||||||
|
// Temperature Sensors
|
||||||
|
//
|
||||||
|
#define TEMP_0_PIN PA4 // TH0
|
||||||
|
#define TEMP_1_PIN PA5 // TH1
|
||||||
|
#define TEMP_BED_PIN PA3 // TB1
|
||||||
|
|
||||||
|
//
|
||||||
|
// Heaters / Fans
|
||||||
|
//
|
||||||
|
#define HEATER_0_PIN PA1 // HEATER0
|
||||||
|
#define HEATER_1_PIN PA0 // HEATER1
|
||||||
|
#define HEATER_BED_PIN PA2 // HOT BED
|
||||||
|
|
||||||
|
#define FAN_PIN PB14 // FAN
|
||||||
|
#define FAN1_PIN PB12 // FAN
|
||||||
|
#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
//
|
||||||
|
// SD Card
|
||||||
|
//
|
||||||
|
#define SD_DETECT_PIN PA8
|
||||||
|
#define SDCARD_CONNECTION ONBOARD
|
||||||
|
#define ONBOARD_SPI_DEVICE 1
|
||||||
|
#define ONBOARD_SD_CS_PIN PC11 // SDSS
|
||||||
|
#define SDIO_SUPPORT
|
||||||
|
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
|
||||||
|
|
||||||
|
#if ANY(RET6_12864_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
|
||||||
|
|
||||||
|
/**
|
||||||
|
* RET6 12864 LCD
|
||||||
|
* ------
|
||||||
|
* PC6 | 1 2 | PB2
|
||||||
|
* PB10 | 3 4 | PE8
|
||||||
|
* PB14 5 6 | PB13
|
||||||
|
* PB12 | 7 8 | PB15
|
||||||
|
* GND | 9 10 | 5V
|
||||||
|
* ------
|
||||||
|
*/
|
||||||
|
#define EXP3_01_PIN PC6
|
||||||
|
#define EXP3_02_PIN PB2
|
||||||
|
#define EXP3_03_PIN PB10
|
||||||
|
#define EXP3_04_PIN PE8
|
||||||
|
#define EXP3_05_PIN PB14
|
||||||
|
#define EXP3_06_PIN PB13
|
||||||
|
#define EXP3_07_PIN PB12
|
||||||
|
#define EXP3_08_PIN PB15
|
||||||
|
|
||||||
|
#elif EITHER(VET6_12864_LCD, DWIN_VET6_CREALITY_LCD)
|
||||||
|
|
||||||
|
/**
|
||||||
|
* VET6 12864 LCD
|
||||||
|
* ------
|
||||||
|
* ? | 1 2 | PC5
|
||||||
|
* PB10 | 3 4 | ?
|
||||||
|
* PA6 5 6 | PA5
|
||||||
|
* PA4 | 7 8 | PA7
|
||||||
|
* GND | 9 10 | 5V
|
||||||
|
* ------
|
||||||
|
*/
|
||||||
|
#define EXP3_01_PIN -1
|
||||||
|
#define EXP3_02_PIN PC5
|
||||||
|
#define EXP3_03_PIN PB10
|
||||||
|
#define EXP3_04_PIN -1
|
||||||
|
#define EXP3_05_PIN PA6
|
||||||
|
#define EXP3_06_PIN PA5
|
||||||
|
#define EXP3_07_PIN PA4
|
||||||
|
#define EXP3_08_PIN PA7
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
#if NONE(RET6_12864_LCD, VET6_12864_LCD)
|
||||||
|
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define LCD_PINS_RS EXP3_07_PIN
|
||||||
|
#define LCD_PINS_ENABLE EXP3_08_PIN
|
||||||
|
#define LCD_PINS_D4 EXP3_06_PIN
|
||||||
|
|
||||||
|
#define BTN_ENC EXP3_02_PIN
|
||||||
|
#define BTN_EN1 EXP3_03_PIN
|
||||||
|
#define BTN_EN2 EXP3_05_PIN
|
||||||
|
|
||||||
|
#define BEEPER_PIN EXP3_01_PIN
|
||||||
|
|
||||||
|
#elif ANY(DWIN_VET6_CREALITY_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
|
||||||
|
|
||||||
|
// RET6 / VET6 DWIN ENCODER LCD
|
||||||
|
#define BTN_ENC EXP3_05_PIN
|
||||||
|
#define BTN_EN1 EXP3_08_PIN
|
||||||
|
#define BTN_EN2 EXP3_07_PIN
|
||||||
|
|
||||||
|
//#define LCD_LED_PIN EXP3_02_PIN
|
||||||
|
#ifndef BEEPER_PIN
|
||||||
|
#define BEEPER_PIN EXP3_06_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// DGUS LCDs
|
||||||
|
#if HAS_DGUS_LCD
|
||||||
|
#define LCD_SERIAL_PORT 3
|
||||||
|
#endif
|
||||||
@ -467,3 +467,24 @@ board = genericSTM32F103VE
|
|||||||
board_build.variant = MARLIN_F103Vx
|
board_build.variant = MARLIN_F103Vx
|
||||||
build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=TIM1
|
build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=TIM1
|
||||||
board_upload.maximum_size = 499712
|
board_upload.maximum_size = 499712
|
||||||
|
|
||||||
|
#
|
||||||
|
# Creality (STM32F103RET6)
|
||||||
|
#
|
||||||
|
[env:STM32F103RET6_creality]
|
||||||
|
platform = ${common_stm32f1.platform}
|
||||||
|
extends = stm32_variant
|
||||||
|
board = genericSTM32F103VE
|
||||||
|
board_build.variant = MARLIN_F103Vx
|
||||||
|
board_build.offset = 0x7000
|
||||||
|
board_upload.offset_address = 0x08007000
|
||||||
|
build_flags = ${stm32_variant.build_flags}
|
||||||
|
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
|
||||||
|
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
|
||||||
|
build_unflags = ${stm32_variant.build_unflags}
|
||||||
|
-DUSBCON -DUSBD_USE_CDC
|
||||||
|
extra_scripts = ${stm32_variant.extra_scripts}
|
||||||
|
pre:buildroot/share/PlatformIO/scripts/random-bin.py
|
||||||
|
monitor_speed = 115200
|
||||||
|
debug_tool = jlink
|
||||||
|
upload_protocol = jlink
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user