mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-22 10:15:18 +00:00
Local testing via Makefile & Docker (#19981)
This commit is contained in:
Costas Basdekis
GitHub
parent
26ac992242
commit
1cceae89cd
6
.github/workflows/test-builds.yml
vendored
6
.github/workflows/test-builds.yml
vendored
@ -119,8 +119,4 @@ jobs:
|
||||
|
||||
- name: Run ${{ matrix.test-platform }} Tests
|
||||
run: |
|
||||
# Inline tests script
|
||||
chmod +x buildroot/bin/*
|
||||
chmod +x buildroot/tests/*
|
||||
export PATH=./buildroot/bin/:./buildroot/tests/:${PATH}
|
||||
run_tests . ${{ matrix.test-platform }}
|
||||
make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}
|
||||
|
||||
56
Makefile
Normal file
56
Makefile
Normal file
@ -0,0 +1,56 @@
|
||||
help:
|
||||
@echo "Tasks for local development:"
|
||||
@echo "* tests-single-ci: Run a single test from inside the CI"
|
||||
@echo "* tests-single-local: Run a single test locally"
|
||||
@echo "* tests-single-local-docker: Run a single test locally, using docker-compose"
|
||||
@echo "* tests-all-local: Run all tests locally"
|
||||
@echo "* tests-all-local-docker: Run all tests locally, using docker-compose"
|
||||
@echo "* setup-local-docker: Setup local docker-compose"
|
||||
@echo ""
|
||||
@echo "Options for testing:"
|
||||
@echo " TEST_TARGET Set when running tests-single-*, to select the"
|
||||
@echo " test. If you set it to ALL it will run all "
|
||||
@echo " tests, but some of them are broken: use "
|
||||
@echo " tests-all-* instead to run only the ones that "
|
||||
@echo " run on GitHub CI"
|
||||
@echo " ONLY_TEST Limit tests to only those that contain this, or"
|
||||
@echo " the index of the test (1-based)"
|
||||
@echo " VERBOSE_PLATFORMIO If you want the full PIO output, set any value"
|
||||
@echo " GIT_RESET_HARD Used by CI: reset all local changes. WARNING:"
|
||||
@echo " THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
|
||||
.PHONY: help
|
||||
|
||||
tests-single-ci:
|
||||
export GIT_RESET_HARD=true
|
||||
$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET)
|
||||
.PHONY: tests-single-ci
|
||||
|
||||
tests-single-local:
|
||||
@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
|
||||
chmod +x buildroot/bin/*
|
||||
chmod +x buildroot/tests/*
|
||||
export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
|
||||
&& export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
|
||||
&& run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
|
||||
.PHONY: tests-single-local
|
||||
|
||||
tests-single-local-docker:
|
||||
@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
|
||||
docker-compose run --rm marlin $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
|
||||
.PHONY: tests-single-local-docker
|
||||
|
||||
tests-all-local:
|
||||
chmod +x buildroot/bin/*
|
||||
chmod +x buildroot/tests/*
|
||||
export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
|
||||
&& export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
|
||||
&& for TEST_TARGET in $$(./get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
|
||||
.PHONY: tests-all-local
|
||||
|
||||
tests-all-local-docker:
|
||||
docker-compose run --rm marlin $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
|
||||
.PHONY: tests-all-local-docker
|
||||
|
||||
setup-local-docker:
|
||||
docker-compose build
|
||||
.PHONY: setup-local-docker
|
||||
@ -110,6 +110,11 @@ Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.
|
||||
- This branch is for fixing bugs and integrating any new features for the duration of the Marlin 2.0.x life-cycle.
|
||||
- Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers.
|
||||
- Please submit Feature Requests and Bug Reports to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues/new/choose). Support resources are also listed there.
|
||||
- Whenever you add new features, be sure to add tests to `buildroot/tests` and then run your tests locally, if possible.
|
||||
- It's optional: Running all the tests on Windows might take a long time, and they will run anyway on GitHub.
|
||||
- If you're running the tests on Linux (or on WSL with the code on a Linux volume) the speed is much faster.
|
||||
- You can use `make tests-all-local` or `make tests-single-local TEST_TARGET=...`.
|
||||
- If you prefer Docker you can use `make tests-all-local-docker` or `make tests-all-local-docker TEST_TARGET=...`.
|
||||
|
||||
### [RepRap.org Wiki Page](https://reprap.org/wiki/Marlin)
|
||||
|
||||
|
||||
@ -7,7 +7,33 @@
|
||||
#
|
||||
|
||||
MFINFO=$(mfinfo) || exit 1
|
||||
[[ -d Marlin/src ]] || { echo "Please 'cd' up to repo root." ; exit 1 ; }
|
||||
[[ -d Marlin/src ]] || { echo "Please 'cd' to the Marlin repo root." ; exit 1 ; }
|
||||
|
||||
perror() { echo -e "$0: \033[0;31m$1 -- $2\033[0m" ; }
|
||||
errout() { echo -e "\033[0;31m$1\033[0m" ; }
|
||||
bugout() { ((DEBUG)) && echo -e "\033[0;32m$1\033[0m" ; }
|
||||
|
||||
usage() {
|
||||
echo "
|
||||
Usage: mftest [-t|--env=<env>] [-n|--num=<num>] [-m|--make] [-y|--build=<Y|n>]
|
||||
mftest [-a|--autobuild]
|
||||
mftest [-r|--rebuild]
|
||||
mftest [-u|--autoupload] [-n|--num=<num>]
|
||||
|
||||
OPTIONS
|
||||
-t --env The environment of the test to apply / run. (As named in platformio.ini.)
|
||||
-n --num The index of the test to run. (In *-tests file order.)
|
||||
-m --make Use the make / Docker method for the build.
|
||||
-y --build Skip 'Do you want to build this test?' and assume YES.
|
||||
-h --help Print this help.
|
||||
-a --autobuild PIO Build using the MOTHERBOARD environment.
|
||||
-u --autoupload PIO Upload using the MOTHERBOARD environment.
|
||||
-v --verbose Extra output for debugging.
|
||||
|
||||
env shortcuts: tree due esp lin lpc|lpc8 lpc9 m128 m256|mega stm|f1 f4 f7 s6 teensy|t31|t32 t35|t36 t40|t41
|
||||
|
||||
"
|
||||
}
|
||||
|
||||
TESTPATH=buildroot/tests
|
||||
|
||||
@ -22,111 +48,146 @@ ISCMD='^(restore|opt|exec|use|pins|env)_'
|
||||
ISEXEC='^exec_'
|
||||
ISCONT='\\ *$'
|
||||
|
||||
# Get the environment and test number from the command
|
||||
TESTENV=${1:-'-'}
|
||||
CHOICE=${2:-0}
|
||||
AUTOENV=0
|
||||
# Get environment, test number, etc. from the command
|
||||
TESTENV='-'
|
||||
CHOICE=0
|
||||
DEBUG=0
|
||||
|
||||
while getopts 'abhmruvyn:t:-:' OFLAG; do
|
||||
case "${OFLAG}" in
|
||||
a) AUTO_BUILD=1 ; bugout "Auto-Build target..." ;;
|
||||
h) EXIT_USAGE=1 ;;
|
||||
m) USE_MAKE=1 ; bugout "Using make with Docker..." ;;
|
||||
n) case "$OPTARG" in
|
||||
*[!0-9]*) perror "option requires a number" $OFLAG ; EXIT_USAGE=1 ;;
|
||||
*) CHOICE="$OPTARG" ; bugout "Got a number: $CHOICE" ;;
|
||||
esac
|
||||
;;
|
||||
r) REBUILD=1 ; bugout "Rebuilding previous..." ;;
|
||||
t) TESTENV="$OPTARG" ; bugout "Got a target: $TESTENV" ;;
|
||||
u) AUTO_BUILD=2 ; bugout "Auto-Upload target..." ;;
|
||||
v) DEBUG=1 ; bugout "Debug ON" ;;
|
||||
y) BUILD_YES='Y' ; bugout "Build will initiate..." ;;
|
||||
-) IFS="=" read -r ONAM OVAL <<< "$OPTARG"
|
||||
case "$ONAM" in
|
||||
help) [[ -z "$OVAL" ]] || perror "option can't take value $OVAL" $ONAM ; EXIT_USAGE=1 ;;
|
||||
autobuild) AUTO_BUILD=1 ; bugout "Auto-Build target..." ;;
|
||||
autoupload) AUTO_BUILD=2 ; bugout "Auto-Upload target..." ;;
|
||||
env) case "$OVAL" in
|
||||
'') perror "option requires a value" $ONAM ; EXIT_USAGE=1 ;;
|
||||
*) TESTENV="$OVAL" ; bugout "Got a target: $TESTENV" ;;
|
||||
esac
|
||||
;;
|
||||
num) case "$OVAL" in
|
||||
[0-9]+) CHOICE="$OVAL" ; bugout "Got a number: $CHOICE" ;;
|
||||
*) perror "option requires a value" $ONAM ; EXIT_USAGE=1 ;;
|
||||
esac
|
||||
;;
|
||||
rebuild) REBUILD=1 ; bugout "Rebuilding previous..." ;;
|
||||
make) USE_MAKE=1 ; bugout "Using make with Docker..." ;;
|
||||
debug|verbose) DEBUG=1 ; bugout "Debug ON" ;;
|
||||
build) case "$OVAL" in
|
||||
''|y|yes) BUILD_YES='Y' ;;
|
||||
n|no) BUILD_YES='N' ;;
|
||||
*) perror "option value must be y, n, yes, or no" $ONAM ; EXIT_USAGE=1 ;;
|
||||
esac
|
||||
bugout "Build will initiate? ($BUILD_YES)"
|
||||
;;
|
||||
*) perror "Unknown flag" "$OPTARG" ; EXIT_USAGE=1 ;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
done
|
||||
|
||||
((EXIT_USAGE)) && { usage ; exit 1 ; }
|
||||
|
||||
if ((REBUILD)); then
|
||||
bugout "Rebuilding previous..."
|
||||
# Build with the last-built env
|
||||
[[ -f "$STATE_FILE" ]] || { errout "No previous (-r) build state found." ; exit 1 ; }
|
||||
read TESTENV <"$STATE_FILE"
|
||||
pio run -d . -e $TESTENV
|
||||
exit
|
||||
fi
|
||||
|
||||
# Allow shorthand for test name
|
||||
case $TESTENV in
|
||||
tree) pio run -d . -e include_tree ; exit 1 ;;
|
||||
due) TESTENV='DUE' ;;
|
||||
esp) TESTENV='esp32' ;;
|
||||
lin*) TESTENV='linux_native' ;;
|
||||
lpc?(8)) TESTENV='LPC1768' ;;
|
||||
lpc9) TESTENV='LPC1769' ;;
|
||||
m128) TESTENV='mega1280' ;;
|
||||
m256) TESTENV='mega2560' ;;
|
||||
mega) TESTENV='mega2560' ;;
|
||||
stm) TESTENV='STM32F103RE' ;;
|
||||
f1) TESTENV='STM32F103RE' ;;
|
||||
f4) TESTENV='STM32F4' ;;
|
||||
f7) TESTENV='STM32F7' ;;
|
||||
s6) TESTENV='FYSETC_S6' ;;
|
||||
teensy) TESTENV='teensy31' ;;
|
||||
t31) TESTENV='teensy31' ;;
|
||||
t32) TESTENV='teensy31' ;;
|
||||
t35) TESTENV='teensy35' ;;
|
||||
t36) TESTENV='teensy35' ;;
|
||||
t40) TESTENV='teensy41' ;;
|
||||
t41) TESTENV='teensy41' ;;
|
||||
|
||||
-h|--help) echo -e "$(basename $0) : Marlin Firmware test, build, and upload\n"
|
||||
echo "Usage: $(basename $0) ................. Select env and test to apply / run"
|
||||
echo " $(basename $0) [-y] env ........ Select a test for env to apply / run"
|
||||
echo " $(basename $0) [-y] env test ... Apply / run the specified env test"
|
||||
echo " $(basename $0) -b [variant] .... Auto-build the specified variant"
|
||||
echo " $(basename $0) -u [variant] .... Auto-build and upload the specified variant"
|
||||
echo
|
||||
echo "env shortcuts: tree due esp lin lpc|lpc8 lpc9 m128 m256|mega stm|f1 f4 f7 s6 teensy|t31|t32 t35|t36 t40|t41"
|
||||
exit
|
||||
;;
|
||||
|
||||
# Build with the last-built env
|
||||
-r) [[ -f "$STATE_FILE" ]] || { echo "No previous (-r) build state found." ; exit 1 ; }
|
||||
read TESTENV <"$STATE_FILE"
|
||||
pio run -d . -e $TESTENV
|
||||
exit
|
||||
;;
|
||||
|
||||
-[bu]) MB=$( grep -E "^\s*#define MOTHERBOARD" Marlin/Configuration.h | awk '{ print $3 }' | $SED 's/BOARD_//' )
|
||||
[[ -z $MB ]] && { echo "Error - Can't read MOTHERBOARD setting." ; exit 1 ; }
|
||||
BLINE=$( grep -E "define\s+BOARD_$MB\b" Marlin/src/core/boards.h )
|
||||
BNUM=$( $SED -E 's/^.+BOARD_[^ ]+ +([0-9]+).+$/\1/' <<<"$BLINE" )
|
||||
BDESC=$( $SED -E 's/^.+\/\/ *(.+)$/\1/' <<<"$BLINE" )
|
||||
[[ -z $BNUM ]] && { echo "Error - Can't find $MB in boards list." ; exit 1 ; }
|
||||
readarray -t ENVS <<< $( grep -EA1 "MB\(.*\b$MB\b.*\)" Marlin/src/pins/pins.h | grep -E '#include.+//.+env:.+' | grep -oE 'env:[^ ]+' | $SED -E 's/env://' )
|
||||
[[ -z $ENVS ]] && { echo "Error - Can't find target(s) for $MB ($BNUM)." ; exit 1 ; }
|
||||
ECOUNT=${#ENVS[*]}
|
||||
|
||||
if [[ $ECOUNT == 1 ]]; then
|
||||
TARGET=$ENVS
|
||||
else
|
||||
if [[ $CHOICE == 0 ]]; then
|
||||
#
|
||||
# List env names and numbers. Get selection.
|
||||
#
|
||||
echo "Available targets for \"$BDESC\" | $MB ($BNUM):"
|
||||
|
||||
IND=0 ; for ENV in "${ENVS[@]}"; do let IND++ ; echo " $IND) $ENV" ; done
|
||||
|
||||
if [[ $ECOUNT > 1 ]]; then
|
||||
for (( ; ; ))
|
||||
do
|
||||
read -p "Select a target for '$MB' (1-$ECOUNT) : " CHOICE
|
||||
[[ -z "$CHOICE" ]] && { echo '(canceled)' ; exit 1 ; }
|
||||
[[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= ECOUNT)) && break
|
||||
echo ">>> Invalid environment choice '$CHOICE'."
|
||||
done
|
||||
echo
|
||||
fi
|
||||
else
|
||||
echo "Detected \"$BDESC\" | $MB ($BNUM)."
|
||||
[[ $CHOICE > $ECOUNT ]] && { echo "Environment selection out of range." ; exit 1 ; }
|
||||
fi
|
||||
TARGET="${ENVS[$CHOICE-1]}"
|
||||
echo "Selected $TARGET"
|
||||
fi
|
||||
|
||||
echo "$TARGET" >"$STATE_FILE"
|
||||
|
||||
if [[ $TESTENV == "-u" ]]; then
|
||||
echo "Build/Uploading environment $TARGET for board $MB ($BNUM)..." ; echo
|
||||
pio run -t upload -e $TARGET
|
||||
else
|
||||
echo "Building environment $TARGET for board $MB ($BNUM)..." ; echo
|
||||
pio run -e $TARGET
|
||||
fi
|
||||
exit
|
||||
;;
|
||||
|
||||
# The -y flag may come first
|
||||
-y) TESTENV=${2:-'-'} ; CHOICE=${3:-0} ;;
|
||||
|
||||
-[a-z]) echo "Unknown flag $TESTENV" ; exit 1 ;;
|
||||
-) ;;
|
||||
tree) pio run -d . -e include_tree ; exit 1 ;;
|
||||
due) TESTENV='DUE' ;;
|
||||
esp) TESTENV='esp32' ;;
|
||||
lin*) TESTENV='linux_native' ;;
|
||||
lpc?(8)) TESTENV='LPC1768' ;;
|
||||
lpc9) TESTENV='LPC1769' ;;
|
||||
m128) TESTENV='mega1280' ;;
|
||||
m256) TESTENV='mega2560' ;;
|
||||
mega) TESTENV='mega2560' ;;
|
||||
stm) TESTENV='STM32F103RE' ;;
|
||||
f1) TESTENV='STM32F103RE' ;;
|
||||
f4) TESTENV='STM32F4' ;;
|
||||
f7) TESTENV='STM32F7' ;;
|
||||
s6) TESTENV='FYSETC_S6' ;;
|
||||
teensy) TESTENV='teensy31' ;;
|
||||
t31) TESTENV='teensy31' ;;
|
||||
t32) TESTENV='teensy31' ;;
|
||||
t35) TESTENV='teensy35' ;;
|
||||
t36) TESTENV='teensy35' ;;
|
||||
t40) TESTENV='teensy41' ;;
|
||||
t41) TESTENV='teensy41' ;;
|
||||
esac
|
||||
|
||||
if ((AUTO_BUILD)); then
|
||||
#
|
||||
# List environments that apply to the current MOTHERBOARD.
|
||||
#
|
||||
echo ; echo -n "Auto " ; ((AUTO_BUILD == 2)) && echo "Upload..." || echo "Build..."
|
||||
MB=$( grep -E "^\s*#define MOTHERBOARD" Marlin/Configuration.h | awk '{ print $3 }' | $SED 's/BOARD_//' )
|
||||
[[ -z $MB ]] && { echo "Error - Can't read MOTHERBOARD setting." ; exit 1 ; }
|
||||
BLINE=$( grep -E "define\s+BOARD_$MB\b" Marlin/src/core/boards.h )
|
||||
BNUM=$( $SED -E 's/^.+BOARD_[^ ]+ +([0-9]+).+$/\1/' <<<"$BLINE" )
|
||||
BDESC=$( $SED -E 's/^.+\/\/ *(.+)$/\1/' <<<"$BLINE" )
|
||||
[[ -z $BNUM ]] && { echo "Error - Can't find $MB in boards list." ; exit 1 ; }
|
||||
ENVS=( $( grep -EA1 "MB\(.*\b$MB\b.*\)" Marlin/src/pins/pins.h | grep -E '#include.+//.+env:[^ ]+' | grep -oE 'env:[^ ]+' | $SED -E 's/env://' ) )
|
||||
[[ -z $ENVS ]] && { errout "Error - Can't find target(s) for $MB ($BNUM)." ; exit 1 ; }
|
||||
ECOUNT=${#ENVS[*]}
|
||||
|
||||
if [[ $ECOUNT == 1 ]]; then
|
||||
TARGET=$ENVS
|
||||
else
|
||||
if [[ $CHOICE == 0 ]]; then
|
||||
# List env names and numbers. Get selection.
|
||||
echo "Available targets for \"$BDESC\" | $MB ($BNUM):"
|
||||
|
||||
IND=0 ; for ENV in "${ENVS[@]}"; do let IND++ ; echo " $IND) $ENV" ; done
|
||||
|
||||
if [[ $ECOUNT > 1 ]]; then
|
||||
for (( ; ; ))
|
||||
do
|
||||
read -p "Select a target for '$MB' (1-$ECOUNT) : " CHOICE
|
||||
[[ -z "$CHOICE" ]] && { echo '(canceled)' ; exit 1 ; }
|
||||
[[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= ECOUNT)) && break
|
||||
errout ">>> Invalid environment choice '$CHOICE'."
|
||||
done
|
||||
echo
|
||||
fi
|
||||
else
|
||||
echo "Detected \"$BDESC\" | $MB ($BNUM)."
|
||||
[[ $CHOICE > $ECOUNT ]] && { echo "Environment selection out of range." ; exit 1 ; }
|
||||
fi
|
||||
TARGET="${ENVS[$CHOICE-1]}"
|
||||
echo "Selected $TARGET"
|
||||
fi
|
||||
|
||||
echo "$TARGET" >"$STATE_FILE"
|
||||
|
||||
if ((AUTO_BUILD == 2)); then
|
||||
echo "Uploading environment $TARGET for board $MB ($BNUM)..." ; echo
|
||||
pio run -t upload -e $TARGET
|
||||
else
|
||||
echo "Building environment $TARGET for board $MB ($BNUM)..." ; echo
|
||||
pio run -e $TARGET
|
||||
fi
|
||||
exit
|
||||
fi
|
||||
|
||||
#
|
||||
# List available tests and ask for selection
|
||||
#
|
||||
@ -148,20 +209,20 @@ if [[ $TESTENV == '-' ]]; then
|
||||
for (( ; ; ))
|
||||
do
|
||||
read -p "Select a test to apply (1-$IND) : " NAMEIND
|
||||
[[ -z "$NAMEIND" ]] && { echo '(canceled)' ; exit 1 ; }
|
||||
[[ -z "$NAMEIND" ]] && { errout "(canceled)" ; exit 1 ; }
|
||||
[[ $NAMEIND =~ $ISNUM ]] && ((NAMEIND >= 1 && NAMEIND <= IND)) && { TESTENV=${NAMES[$NAMEIND-1]} ; echo ; break ; }
|
||||
echo "Invalid selection."
|
||||
errout "Invalid selection."
|
||||
done
|
||||
fi
|
||||
|
||||
# Get the contents of the test file
|
||||
OUT=$( cat $TESTPATH/$TESTENV-tests 2>/dev/null ) || { echo "Can't find test '$TESTENV'." ; exit 1 ; }
|
||||
OUT=$( cat $TESTPATH/$TESTENV-tests 2>/dev/null ) || { errout "Can't find test '$TESTENV'." ; exit 1 ; }
|
||||
|
||||
# Count up the number of tests
|
||||
TESTCOUNT=$( awk "/$ISEXEC/{a++}END{print a}" <<<"$OUT" )
|
||||
|
||||
# User entered a number?
|
||||
(( CHOICE && CHOICE > TESTCOUNT )) && { echo "Invalid test selection '$CHOICE' (1-$TESTCOUNT)." ; exit 1 ; }
|
||||
(( CHOICE && CHOICE > TESTCOUNT )) && { errout "Invalid test selection '$CHOICE' (1-$TESTCOUNT)." ; exit 1 ; }
|
||||
|
||||
if [[ $CHOICE == 0 ]]; then
|
||||
#
|
||||
@ -172,7 +233,7 @@ if [[ $CHOICE == 0 ]]; then
|
||||
while IFS= read -r LINE
|
||||
do
|
||||
if [[ $LINE =~ $ISEXEC ]]; then
|
||||
DESC=$( "$SED" -E 's/^.+"(.*)".*$/\1/g' <<<"$LINE" )
|
||||
DESC=$( "$SED" -E 's/^exec_test \$1 \$2 "([^"]+)".*$/\1/g' <<<"$LINE" )
|
||||
(( ++IND < 10 )) && echo -n " "
|
||||
echo " $IND) $DESC"
|
||||
fi
|
||||
@ -183,9 +244,9 @@ if [[ $CHOICE == 0 ]]; then
|
||||
for (( ; ; ))
|
||||
do
|
||||
read -p "Select a '$TESTENV' test (1-$TESTCOUNT) : " CHOICE
|
||||
[[ -z "$CHOICE" ]] && { echo '(canceled)' ; exit 1 ; }
|
||||
[[ -z "$CHOICE" ]] && { errout "(canceled)" ; exit 1 ; }
|
||||
[[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= TESTCOUNT)) && break
|
||||
echo ">>> Invalid test selection '$CHOICE'."
|
||||
errout ">>> Invalid test selection '$CHOICE'."
|
||||
done
|
||||
fi
|
||||
fi
|
||||
@ -193,6 +254,7 @@ fi
|
||||
#
|
||||
# Run the specified test lines
|
||||
#
|
||||
echo -ne "\033[0;33m"
|
||||
echo "$OUT" | {
|
||||
IND=0
|
||||
GOTX=0
|
||||
@ -210,27 +272,26 @@ echo "$OUT" | {
|
||||
}
|
||||
((IND == CHOICE)) && {
|
||||
GOTX=1
|
||||
[[ $CMD == "" ]] && CMD="$LINE" || CMD=$( echo -e "$CMD$LINE" | $SED -e 's/\\//g' )
|
||||
[[ $LINE =~ $ISCONT ]] || { echo $CMD ; eval "$CMD" ; CMD="" ; }
|
||||
[[ $CMD == "" ]] && CMD="$LINE" || CMD=$( echo -e "$CMD$LINE" | $SED -e 's/\\//g' | $SED -E 's/ +/ /g' )
|
||||
[[ $LINE =~ $ISCONT ]] || { echo "$CMD" ; eval "$CMD" ; CMD="" ; }
|
||||
}
|
||||
fi
|
||||
fi
|
||||
done
|
||||
}
|
||||
echo -ne "\033[0m"
|
||||
|
||||
# Make clear it's a TEST
|
||||
opt_set CUSTOM_MACHINE_NAME "\"$TESTENV-tests ($CHOICE)\""
|
||||
|
||||
# Get a -y parameter the lazy way
|
||||
[[ "$2" == "-y" || "$3" == "-y" ]] && BUILD_YES='Y'
|
||||
|
||||
# Build the test too?
|
||||
if [[ $BUILD_YES != 'Y' ]]; then
|
||||
if [[ -z "$BUILD_YES" ]]; then
|
||||
echo
|
||||
read -p "Build $TESTENV test #$CHOICE (y/N) ? " BUILD_YES
|
||||
fi
|
||||
|
||||
[[ $BUILD_YES == 'Y' || $BUILD_YES == 'Yes' ]] && {
|
||||
pio run -d . -e $TESTENV
|
||||
((USE_MAKE)) && make tests-single-local TEST_TARGET=$TESTENV ONLY_TEST=$CHOICE
|
||||
((USE_MAKE)) || pio run -d . -e $TESTENV
|
||||
echo "$TESTENV" >"$STATE_FILE"
|
||||
}
|
||||
|
||||
@ -13,7 +13,7 @@ restore_configs
|
||||
use_example_configs ArmEd
|
||||
opt_set X_DRIVER_TYPE TMC2130
|
||||
opt_set Y_DRIVER_TYPE TMC2208
|
||||
exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers"
|
||||
exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -14,7 +14,7 @@ opt_set MOTHERBOARD BOARD_BTT_BTT002_V1_0
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set X_DRIVER_TYPE TMC2209
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers"
|
||||
exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -37,7 +37,7 @@ opt_set FIL_RUNOUT4_STATE HIGH
|
||||
opt_enable FIL_RUNOUT4_PULL
|
||||
opt_set FIL_RUNOUT8_STATE HIGH
|
||||
opt_enable FIL_RUNOUT8_PULL
|
||||
exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states"
|
||||
exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
|
||||
@ -53,7 +53,7 @@ opt_set DEFAULT_Kp_LIST "{ 22.2, 20.0, 21.0, 19.0, 18.0, 17.0 }"
|
||||
opt_set DEFAULT_Ki_LIST "{ 1.08 }"
|
||||
opt_set DEFAULT_Kd_LIST "{ 114.0, 112.0, 110.0, 108.0 }"
|
||||
opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_INIT_BEFORE_SWAP TOOLCHANGE_FS_PRIME_FIRST_USED PID_PARAMS_PER_HOTEND
|
||||
exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z"
|
||||
exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -12,7 +12,7 @@ set -e
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
|
||||
opt_set SERIAL_PORT 1
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration"
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration" "$3"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
|
||||
@ -26,7 +26,7 @@ opt_set E2_AUTO_FAN_PIN PC12
|
||||
opt_set X_DRIVER_TYPE TMC2209
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers"
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -33,7 +33,7 @@ opt_set EXTRUDER_AUTO_FAN_SPEED 100
|
||||
opt_set TEMP_SENSOR_CHAMBER 3
|
||||
opt_add TEMP_CHAMBER_PIN 6
|
||||
opt_set HEATER_CHAMBER_PIN 45
|
||||
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options."
|
||||
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options." "$3"
|
||||
|
||||
#
|
||||
# RADDS with BLTouch, ABL(B), 3 x Z auto-align
|
||||
@ -51,7 +51,7 @@ opt_add Z2_MAX_PIN 2
|
||||
opt_add Z3_MAX_PIN 3
|
||||
pins_set ramps/RAMPS X_MAX_PIN -1
|
||||
pins_set ramps/RAMPS Y_MAX_PIN -1
|
||||
exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN"
|
||||
exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN" "$3"
|
||||
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
@ -62,4 +62,4 @@ opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF
|
||||
opt_set EXTRUDERS 2
|
||||
opt_set NUM_SERVOS 1
|
||||
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY
|
||||
exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY"
|
||||
exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY" "$3"
|
||||
|
||||
@ -10,12 +10,12 @@ set -e
|
||||
# Test Archim 1
|
||||
#
|
||||
use_example_configs UltiMachine/Archim1
|
||||
exec_test $1 $2 "Archim 1 base configuration"
|
||||
exec_test $1 $2 "Archim 1 base configuration" "$3"
|
||||
|
||||
#
|
||||
# Test Archim 2
|
||||
#
|
||||
use_example_configs UltiMachine/Archim2
|
||||
exec_test $1 $2 "Archim 2 base configuration"
|
||||
exec_test $1 $2 "Archim 2 base configuration" "$3"
|
||||
|
||||
restore_configs
|
||||
|
||||
@ -12,7 +12,7 @@ opt_set MOTHERBOARD BOARD_FLYF407ZG
|
||||
opt_set SERIAL_PORT -1
|
||||
opt_set X_DRIVER_TYPE TMC2208
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
exec_test $1 $2 "FLYF407ZG Default Config with mixed TMC Drivers"
|
||||
exec_test $1 $2 "FLYF407ZG Default Config with mixed TMC Drivers" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -12,7 +12,7 @@ set -e
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_FYSETC_F6_13
|
||||
opt_enable DGUS_LCD_UI_FYSETC
|
||||
exec_test $1 $2 "FYSETC F6 1.3 with DGUS"
|
||||
exec_test $1 $2 "FYSETC F6 1.3 with DGUS" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -11,7 +11,7 @@ restore_configs
|
||||
use_example_configs FYSETC/S6
|
||||
opt_set Y_DRIVER_TYPE TMC2209
|
||||
opt_set Z_DRIVER_TYPE TMC2130
|
||||
exec_test $1 $2 "FYSETC S6 Example"
|
||||
exec_test $1 $2 "FYSETC S6 Example" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -12,7 +12,7 @@ set -e
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_LERDGE_X
|
||||
opt_set SERIAL_PORT 1
|
||||
exec_test $1 $2 "LERDGE X with Default Configuration"
|
||||
exec_test $1 $2 "LERDGE X with Default Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -17,7 +17,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
|
||||
opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED
|
||||
opt_set NEOPIXEL_PIN P1_16
|
||||
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel"
|
||||
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" "$3"
|
||||
|
||||
#restore_configs
|
||||
#use_example_configs Mks/Sbase
|
||||
@ -30,7 +30,7 @@ opt_set TEMP_SENSOR_1 1
|
||||
opt_set NUM_SERVOS 2
|
||||
opt_set SERVO_DELAY "{ 300, 300 }"
|
||||
opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER
|
||||
exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE"
|
||||
exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE" "$3"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB
|
||||
@ -47,7 +47,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_
|
||||
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }"
|
||||
exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features."
|
||||
exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -10,7 +10,7 @@ set -e
|
||||
# Build with the default configurations
|
||||
#
|
||||
use_example_configs Azteeg/X5GT
|
||||
exec_test $1 $2 "Azteeg X5GT Example Configuration"
|
||||
exec_test $1 $2 "Azteeg X5GT Example Configuration" "$3"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD
|
||||
@ -25,7 +25,7 @@ opt_enable VIKI2 SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
|
||||
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
|
||||
opt_disable SD_PROCEDURE_DEPTH
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "Smoothieboard with many features"
|
||||
exec_test $1 $2 "Smoothieboard with many features" "$3"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD
|
||||
@ -39,7 +39,7 @@ opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PI
|
||||
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
|
||||
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI"
|
||||
exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI" "$3"
|
||||
|
||||
#restore_configs
|
||||
#opt_set MOTHERBOARD BOARD_AZTEEG_X5_MINI_WIFI
|
||||
@ -67,7 +67,7 @@ opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT MECHANICAL
|
||||
SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \
|
||||
EXPERIMENTAL_I2CBUS
|
||||
opt_disable PSU_CONTROL
|
||||
exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING"
|
||||
exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -15,7 +15,7 @@ opt_set SERIAL_PORT -1
|
||||
opt_enable BLTOUCH Z_SAFE_HOMING SPEAKER
|
||||
opt_set X_DRIVER_TYPE TMC2209
|
||||
opt_set Y_DRIVER_TYPE TMC2208
|
||||
exec_test $1 $2 "Mixed timer usage"
|
||||
exec_test $1 $2 "Mixed timer usage" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -33,7 +33,7 @@ opt_enable ENDSTOP_INTERRUPTS_FEATURE S_CURVE_ACCELERATION BLTOUCH Z_MIN_PROBE_R
|
||||
MOVE_Z_WHEN_IDLE BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
|
||||
LIN_ADVANCE ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE MONITOR_DRIVER_STATUS SENSORLESS_HOMING \
|
||||
SQUARE_WAVE_STEPPING TMC_DEBUG EXPERIMENTAL_SCURVE
|
||||
exec_test $1 $2 "Build Grand Central M4 Default Configuration"
|
||||
exec_test $1 $2 "Build Grand Central M4 Default Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -9,7 +9,7 @@ set -e
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_MALYAN_M200_V2
|
||||
opt_set SERIAL_PORT -1
|
||||
exec_test $1 $2 "Malyan M200 v2 Default Config"
|
||||
exec_test $1 $2 "Malyan M200 v2 Default Config" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -9,7 +9,7 @@ set -e
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_MALYAN_M200_V2
|
||||
opt_set SERIAL_PORT -1
|
||||
exec_test $1 $2 "Malyan M200 v2 Default Config"
|
||||
exec_test $1 $2 "Malyan M200 v2 Default Config" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -7,7 +7,7 @@
|
||||
set -e
|
||||
|
||||
use_example_configs Malyan/M200
|
||||
exec_test $1 $2 "Malyan M200"
|
||||
exec_test $1 $2 "Malyan M200" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -22,7 +22,7 @@ opt_set Y_SLAVE_ADDRESS 1
|
||||
opt_set Z_SLAVE_ADDRESS 2
|
||||
opt_set E0_SLAVE_ADDRESS 3
|
||||
|
||||
exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial"
|
||||
exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -13,7 +13,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration"
|
||||
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -10,7 +10,7 @@ set -e
|
||||
# Build with the default configurations
|
||||
#
|
||||
use_example_configs "Creality/Ender-3/FYSETC Cheetah 1.2/base"
|
||||
exec_test $1 $2 "Cheetah 1.2 Configuration"
|
||||
exec_test $1 $2 "Cheetah 1.2 Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -17,7 +17,7 @@ opt_set X_DRIVER_TYPE TMC2208
|
||||
opt_set Y_DRIVER_TYPE TMC2208
|
||||
opt_set Z_DRIVER_TYPE TMC2208
|
||||
opt_set E0_DRIVER_TYPE TMC2208
|
||||
exec_test $1 $2 "MEEB_3DP - Basic Config with TMC2208 SW Serial"
|
||||
exec_test $1 $2 "MEEB_3DP - Basic Config with TMC2208 SW Serial" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -16,7 +16,7 @@ opt_set SERIAL_PORT -1
|
||||
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \
|
||||
PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \
|
||||
BAUD_RATE_GCODE GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE
|
||||
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES"
|
||||
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -11,6 +11,6 @@ set -e
|
||||
#
|
||||
use_example_configs "Creality/Ender-3 V2"
|
||||
opt_enable MARLIN_DEV_MODE
|
||||
exec_test $1 $2 "Ender 3 v2"
|
||||
exec_test $1 $2 "Ender 3 v2" "$3"
|
||||
|
||||
restore_configs
|
||||
|
||||
@ -15,7 +15,7 @@ opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
opt_set X_DRIVER_TYPE TMC2209
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Config with mixed TMC Drivers"
|
||||
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Config with mixed TMC Drivers" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -13,7 +13,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration"
|
||||
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -8,7 +8,7 @@ set -e
|
||||
|
||||
use_example_configs Alfawise/U20
|
||||
opt_enable BAUD_RATE_GCODE
|
||||
exec_test $1 $2 "Full-featured U20 config"
|
||||
exec_test $1 $2 "Full-featured U20 config" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -10,7 +10,7 @@ set -e
|
||||
# Build with the default configurations
|
||||
#
|
||||
use_example_configs STM32/STM32F4
|
||||
exec_test $1 $2 "STM32F4 Default Configuration"
|
||||
exec_test $1 $2 "STM32F4 Default Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -10,7 +10,7 @@ set -e
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_STEVAL_3DP001V1
|
||||
opt_set SERIAL_PORT -1
|
||||
exec_test $1 $2 "STM32F401VE_STEVAL Default Config"
|
||||
exec_test $1 $2 "STM32F401VE_STEVAL Default Config" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -9,7 +9,7 @@ set -e
|
||||
restore_configs
|
||||
use_example_configs STM32/Black_STM32F407VET6
|
||||
opt_enable BAUD_RATE_GCODE
|
||||
exec_test $1 $2 "Full-featured Sample Black STM32F407VET6 config"
|
||||
exec_test $1 $2 "Full-featured Sample Black STM32F407VET6 config" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -12,7 +12,7 @@ set -e
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_REMRAM_V1
|
||||
opt_set SERIAL_PORT 1
|
||||
exec_test $1 $2 "Default Configuration"
|
||||
exec_test $1 $2 "Default Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -11,7 +11,7 @@ set -e
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BRAINWAVE_PRO
|
||||
exec_test $1 $2 "Default Configuration"
|
||||
exec_test $1 $2 "Default Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -11,12 +11,12 @@ set -e
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_PRINTRBOARD
|
||||
exec_test $1 $2 "Printrboard Configuration"
|
||||
exec_test $1 $2 "Printrboard Configuration" "$3"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_PRINTRBOARD_REVF
|
||||
opt_enable MINIPANEL
|
||||
exec_test $1 $2 "Printrboard RevF with MiniPanel and Stepper DAC (in pins file)"
|
||||
exec_test $1 $2 "Printrboard RevF with MiniPanel and Stepper DAC (in pins file)" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -15,7 +15,7 @@ opt_enable WIFISUPPORT WEBSUPPORT GCODE_MACROS BAUD_RATE_GCODE M115_GEOMETRY_REP
|
||||
opt_add WIFI_SSID "\"ssid\""
|
||||
opt_add WIFI_PWD "\"password\""
|
||||
opt_set TX_BUFFER_SIZE 64
|
||||
exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT"
|
||||
exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT" "$3"
|
||||
|
||||
#
|
||||
# Build with TMC drivers using hardware serial
|
||||
@ -35,7 +35,7 @@ opt_set Y_SLAVE_ADDRESS 1
|
||||
opt_set Z_SLAVE_ADDRESS 2
|
||||
opt_set E0_SLAVE_ADDRESS 3
|
||||
opt_enable HOTEND_IDLE_TIMEOUT
|
||||
exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle"
|
||||
exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -10,7 +10,7 @@ set -e
|
||||
# Build with the default configurations
|
||||
#
|
||||
use_example_configs JGAurora/A5S
|
||||
exec_test $1 $2 "JGAurora/A5S Configuration"
|
||||
exec_test $1 $2 "JGAurora/A5S Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -13,7 +13,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_LINUX_RAMPS
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_enable PIDTEMPBED EEPROM_SETTINGS BAUD_RATE_GCODE
|
||||
exec_test $1 $2 "Linux with EEPROM"
|
||||
exec_test $1 $2 "Linux with EEPROM" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -10,7 +10,7 @@ restore_configs
|
||||
use_example_configs "delta/Malyan M300"
|
||||
opt_disable AUTO_BED_LEVELING_3POINT
|
||||
opt_set LCD_SERIAL_PORT 1
|
||||
exec_test $1 $2 "Malyan M300 (delta)"
|
||||
exec_test $1 $2 "Malyan M300 (delta)" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -27,7 +27,7 @@ opt_set POWER_MONITOR_CURRENT_PIN 14
|
||||
opt_set POWER_MONITOR_VOLTAGE_PIN 15
|
||||
opt_set CLOSED_LOOP_ENABLE_PIN 44
|
||||
opt_set CLOSED_LOOP_MOVE_COMPLETE_PIN 45
|
||||
exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD"
|
||||
exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD" "$3"
|
||||
|
||||
#
|
||||
# Test DUAL_X_CARRIAGE
|
||||
@ -39,21 +39,21 @@ opt_set EXTRUDERS 2
|
||||
opt_set TEMP_SENSOR_1 1
|
||||
opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD
|
||||
opt_set REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
|
||||
exec_test $1 $2 "TT Oscar | DUAL_X_CARRIAGE"
|
||||
exec_test $1 $2 "TT Oscar | DUAL_X_CARRIAGE" "$3"
|
||||
|
||||
#
|
||||
# Delta Config (generic) + Probeless
|
||||
#
|
||||
use_example_configs delta/generic
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_AUTO_CALIBRATION DELTA_CALIBRATION_MENU
|
||||
exec_test $1 $2 "RAMPS | DELTA | RRD LCD | DELTA_AUTO_CALIBRATION | DELTA_CALIBRATION_MENU"
|
||||
exec_test $1 $2 "RAMPS | DELTA | RRD LCD | DELTA_AUTO_CALIBRATION | DELTA_CALIBRATION_MENU" "$3"
|
||||
|
||||
#
|
||||
# Delta Config (generic) + ABL bilinear + BLTOUCH
|
||||
use_example_configs delta/generic
|
||||
opt_set LCD_LANGUAGE cz
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH
|
||||
exec_test $1 $2 "DELTA | RRD LCD | ABL Bilinear | BLTOUCH"
|
||||
exec_test $1 $2 "DELTA | RRD LCD | ABL Bilinear | BLTOUCH" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -32,7 +32,7 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
|
||||
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
|
||||
LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
|
||||
BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
|
||||
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..."
|
||||
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3"
|
||||
|
||||
#
|
||||
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
|
||||
@ -58,7 +58,7 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
|
||||
opt_set LCD_LANGUAGE jp_kana
|
||||
opt_disable SEGMENT_LEVELED_MOVES
|
||||
opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL M114_DETAIL
|
||||
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..."
|
||||
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..." "$3"
|
||||
|
||||
#
|
||||
# Test a Servo Probe
|
||||
@ -73,7 +73,7 @@ opt_enable ZONESTAR_LCD Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_
|
||||
NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
|
||||
PRUSA_MMU2 MMU2_MENUS PRUSA_MMU2_S_MODE DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \
|
||||
FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING
|
||||
exec_test $1 $2 "RAMPS | ZONESTAR + Chinese | MMU2 | Servo | 3-Point + Debug | G38 ..."
|
||||
exec_test $1 $2 "RAMPS | ZONESTAR + Chinese | MMU2 | Servo | 3-Point + Debug | G38 ..." "$3"
|
||||
|
||||
#
|
||||
# 5 runout sensors with distinct states
|
||||
@ -110,7 +110,7 @@ opt_add M100_FREE_MEMORY_DUMPER
|
||||
opt_add M100_FREE_MEMORY_CORRUPTOR
|
||||
opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
|
||||
opt_set I2C_SLAVE_ADDRESS 63
|
||||
exec_test $1 $2 "MEGACONTROLLER | Minipanel | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..."
|
||||
exec_test $1 $2 "MEGACONTROLLER | Minipanel | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..." "$3"
|
||||
|
||||
#
|
||||
# Mixing Extruder with 5 steppers, Greek
|
||||
@ -122,7 +122,7 @@ opt_enable MIXING_EXTRUDER GRADIENT_MIX GRADIENT_VTOOL CR10_STOCKDISPLAY \
|
||||
USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z
|
||||
opt_set MIXING_STEPPERS 5
|
||||
opt_set LCD_LANGUAGE ru
|
||||
exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek"
|
||||
exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
|
||||
|
||||
#
|
||||
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
|
||||
@ -163,7 +163,7 @@ opt_set FAN_MIN_PWM 50
|
||||
opt_set FAN_KICKSTART_TIME 100
|
||||
opt_set XY_FREQUENCY_LIMIT 15
|
||||
opt_add FILWIDTH_PIN 5
|
||||
exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..."
|
||||
exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." "$3"
|
||||
|
||||
######## Other Standard LCD/Panels ##############
|
||||
#
|
||||
@ -286,13 +286,13 @@ opt_add L6470_CHAIN_MISO_PIN 49
|
||||
opt_add L6470_CHAIN_MOSI_PIN 40
|
||||
opt_add L6470_CHAIN_SS_PIN 42
|
||||
opt_add "ENABLE_RESET_L64XX_CHIPS(V) NOOP"
|
||||
exec_test $1 $2 "DELTA, RAMPS, L6470, UBL, Allen Key, EEPROM, OLED_PANEL_TINYBOY2..."
|
||||
exec_test $1 $2 "DELTA, RAMPS, L6470, UBL, Allen Key, EEPROM, OLED_PANEL_TINYBOY2..." "$3"
|
||||
|
||||
#
|
||||
# Delta Config (FLSUN AC because it's complex)
|
||||
#
|
||||
use_example_configs delta/FLSUN/auto_calibrate
|
||||
exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config"
|
||||
exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config" "$3"
|
||||
|
||||
#
|
||||
# Makibox Config need to check board type for Teensy++ 2.0
|
||||
@ -315,7 +315,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
|
||||
MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \
|
||||
MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \
|
||||
USE_ZMIN_PLUG SENSORLESS_HOMING TMC_DEBUG M114_DETAIL
|
||||
exec_test $1 $2 "RAMPS | Mixed TMC | Sensorless | RRDFGSC | Games"
|
||||
exec_test $1 $2 "RAMPS | Mixed TMC | Sensorless | RRDFGSC | Games" "$3"
|
||||
|
||||
#
|
||||
# SCARA with Mixed TMC
|
||||
@ -330,7 +330,7 @@ opt_set X_DRIVER_TYPE TMC2209
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
opt_set Z_DRIVER_TYPE TMC2130_STANDALONE
|
||||
opt_set E0_DRIVER_TYPE TMC2660
|
||||
exec_test $1 $2 "RAMPS | SCARA | Mixed TMC | EEPROM"
|
||||
exec_test $1 $2 "RAMPS | SCARA | Mixed TMC | EEPROM" "$3"
|
||||
|
||||
#
|
||||
# tvrrug Config need to check board type for sanguino atmega644p
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
set -e
|
||||
|
||||
use_example_configs Mks/Robin
|
||||
exec_test $1 $2 "MKS Robin config (FSMC Color UI)"
|
||||
exec_test $1 $2 "MKS Robin config (FSMC Color UI)" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -11,7 +11,7 @@ opt_set MOTHERBOARD BOARD_MKS_ROBIN_LITE
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_enable EEPROM_SETTINGS
|
||||
opt_enable SDSUPPORT
|
||||
exec_test $1 $2 "Default Configuration with Fallback SD EEPROM"
|
||||
exec_test $1 $2 "Default Configuration with Fallback SD EEPROM" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -11,7 +11,7 @@ use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI
|
||||
opt_set EXTRUDERS 1
|
||||
opt_set TEMP_SENSOR_1 0
|
||||
exec_test $1 $2 "MKS Robin mini"
|
||||
exec_test $1 $2 "MKS Robin mini" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -12,7 +12,7 @@ set -e
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
|
||||
exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC"
|
||||
exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano Emulated DOGM SPI
|
||||
@ -22,7 +22,7 @@ use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC
|
||||
opt_enable TFT_INTERFACE_SPI
|
||||
exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI"
|
||||
exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin nano v1.2 LVGL FSMC
|
||||
@ -31,7 +31,7 @@ use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
|
||||
opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
opt_enable TFT_LVGL_UI TFT_RES_480x320
|
||||
exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC"
|
||||
exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano LVGL SPI
|
||||
@ -41,7 +41,7 @@ use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
|
||||
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI"
|
||||
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano New Color UI 480x320 SPI
|
||||
@ -51,7 +51,7 @@ use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
|
||||
opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
|
||||
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI"
|
||||
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano LVGL SPI + TMC
|
||||
@ -63,7 +63,7 @@ opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
|
||||
opt_set X_DRIVER_TYPE TMC2209
|
||||
opt_set Y_DRIVER_TYPE TMC2209
|
||||
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC"
|
||||
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -15,7 +15,7 @@ opt_set X_DRIVER_TYPE TMC2209
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_disable THERMAL_PROTECTION_HOTENDS
|
||||
exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection"
|
||||
exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -7,7 +7,7 @@
|
||||
set -e
|
||||
|
||||
use_example_configs Mks/Robin
|
||||
exec_test $1 $2 "MKS Robin base configuration"
|
||||
exec_test $1 $2 "MKS Robin base configuration" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -42,7 +42,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
|
||||
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
|
||||
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
|
||||
opt_add DEBUG_POWER_LOSS_RECOVERY
|
||||
exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..."
|
||||
exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3"
|
||||
|
||||
#
|
||||
# Full size Rambo Dual Endstop CNC
|
||||
@ -58,7 +58,7 @@ opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
|
||||
S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \
|
||||
ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES
|
||||
opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS
|
||||
exec_test $1 $2 "Rambo CNC Configuration"
|
||||
exec_test $1 $2 "Rambo CNC Configuration" "$3"
|
||||
|
||||
#
|
||||
# Rambo heated bed only
|
||||
@ -79,7 +79,7 @@ opt_set X_DRIVER_TYPE TMC2130
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
opt_set Z_DRIVER_TYPE TMC2130
|
||||
opt_set E0_DRIVER_TYPE TMC2130
|
||||
exec_test $1 $2 "Einsy RAMBo with TMC2130"
|
||||
exec_test $1 $2 "Einsy RAMBo with TMC2130" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -15,7 +15,7 @@ opt_enable PIDTEMPBED
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_disable THERMAL_PROTECTION_BED
|
||||
opt_set X_DRIVER_TYPE TMC2130
|
||||
exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled"
|
||||
exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled" "$3"
|
||||
|
||||
# Build examples
|
||||
restore_configs
|
||||
@ -25,7 +25,7 @@ opt_enable PIDTEMPBED EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPH
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_set X_DRIVER_TYPE TMC2130
|
||||
opt_set Y_DRIVER_TYPE TMC2208
|
||||
exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller"
|
||||
exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" "$3"
|
||||
|
||||
# Build examples
|
||||
restore_configs
|
||||
@ -33,7 +33,7 @@ opt_set MOTHERBOARD BOARD_RUMBA32_MKS
|
||||
opt_set SERIAL_PORT -1
|
||||
opt_set X_DRIVER_TYPE TMC2130
|
||||
opt_set Y_DRIVER_TYPE TMC2208
|
||||
exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers"
|
||||
exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
||||
@ -10,11 +10,27 @@ set -e
|
||||
|
||||
exec_test () {
|
||||
printf "\n\033[0;32m[Test $2] \033[0m$3...\n"
|
||||
if platformio run --project-dir $1 -e $2 --silent; then
|
||||
# Check to see if we should skip tests
|
||||
if [[ -n "$4" ]] ; then
|
||||
if [[ ! "$3" =~ $4 ]] ; then
|
||||
printf "\033[1;33mSkipped\033[0m\n"
|
||||
return 0
|
||||
fi
|
||||
fi
|
||||
if [[ -z "$VERBOSE_PLATFORMIO" ]] ; then
|
||||
silent="--silent"
|
||||
else
|
||||
silent=""
|
||||
fi
|
||||
if platformio run --project-dir $1 -e $2 $silent; then
|
||||
printf "\033[0;32mPassed\033[0m\n"
|
||||
return 0
|
||||
else
|
||||
git reset --hard HEAD
|
||||
if [[ -n $GIT_RESET_HARD ]]; then
|
||||
git reset --hard HEAD
|
||||
else
|
||||
restore_configs
|
||||
fi
|
||||
printf "\033[0;31mFailed!\033[0m\n"
|
||||
return 1
|
||||
fi
|
||||
@ -30,12 +46,32 @@ if [[ $2 = "ALL" ]]; then
|
||||
testenv=$(basename $f | cut -d"-" -f1)
|
||||
printf "Running \033[0;32m$f\033[0m Tests\n"
|
||||
exec_test $1 "$testenv --target clean" "Setup Build Environment"
|
||||
$f $1 $testenv
|
||||
git reset --hard HEAD
|
||||
if [[ $GIT_RESET_HARD == "true" ]]; then
|
||||
git reset --hard HEAD
|
||||
else
|
||||
restore_configs
|
||||
fi
|
||||
done
|
||||
else
|
||||
exec_test $1 "$2 --target clean" "Setup Build Environment"
|
||||
$2-tests $1 $2
|
||||
git reset --hard HEAD
|
||||
test_name="$3"
|
||||
# If the test name is 1 or 2 digits, treat it as an index
|
||||
if [[ "$test_name" =~ ^[0-9][0-9]?$ ]] ; then
|
||||
# Find the test name that corresponds to that index
|
||||
test_name="$(cat buildroot/tests/$2-tests | grep -e '^exec_test' | sed -n "$3p" | sed "s/.*\$1 \$2 \"\([^\"]*\).*/\1/g")"
|
||||
if [[ -z "$test_name" ]] ; then
|
||||
# Fail if none matches
|
||||
printf "\033[0;31mCould not find test \033[0m#$3\033[0;31m in \033[0mbuildroot/tests/$2-tests\n"
|
||||
exit 1
|
||||
else
|
||||
printf "\033[0;32mMatching test \033[0m#$3\033[0;32m: '\033[0m$test_name\033[0;32m'\n"
|
||||
fi
|
||||
fi
|
||||
$2-tests $1 $2 "$test_name"
|
||||
if [[ $GIT_RESET_HARD == "true" ]]; then
|
||||
git reset --hard HEAD
|
||||
else
|
||||
restore_configs
|
||||
fi
|
||||
fi
|
||||
printf "\033[0;32mAll tests completed successfully\033[0m\n"
|
||||
|
||||
@ -11,7 +11,7 @@ set -e
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12
|
||||
exec_test $1 $2 "Default Configuration"
|
||||
exec_test $1 $2 "Default Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -11,7 +11,7 @@ set -e
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12
|
||||
exec_test $1 $2 "Default Configuration"
|
||||
exec_test $1 $2 "Default Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@ -8,7 +8,7 @@ set -e
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY31_32
|
||||
exec_test $1 $2 "Teensy3.1 with default config"
|
||||
exec_test $1 $2 "Teensy3.1 with default config" "$3"
|
||||
|
||||
#
|
||||
# Test many features together
|
||||
@ -27,4 +27,4 @@ opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCO
|
||||
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
|
||||
opt_set I2C_SLAVE_ADDRESS 63
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "Teensy3.1 with many features"
|
||||
exec_test $1 $2 "Teensy3.1 with many features" "$3"
|
||||
|
||||
@ -8,7 +8,7 @@ set -e
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY35_36
|
||||
exec_test $1 $2 "Teensy3.5 with default config"
|
||||
exec_test $1 $2 "Teensy3.5 with default config" "$3"
|
||||
|
||||
#
|
||||
# Test as many features together as possible
|
||||
@ -29,7 +29,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT
|
||||
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
|
||||
opt_set I2C_SLAVE_ADDRESS 63
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "Teensy3.5 with many features"
|
||||
exec_test $1 $2 "Teensy3.5 with many features" "$3"
|
||||
|
||||
#
|
||||
# Test a Sled Z Probe with Linear leveling
|
||||
@ -37,7 +37,7 @@ exec_test $1 $2 "Teensy3.5 with many features"
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY35_36
|
||||
opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
|
||||
exec_test $1 $2 "Sled Z Probe with Linear leveling"
|
||||
exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
|
||||
|
||||
#
|
||||
# Test a Servo Probe
|
||||
@ -63,7 +63,7 @@ opt_set MOTHERBOARD BOARD_TEENSY35_36
|
||||
opt_set EXTRUDERS 2
|
||||
opt_set TEMP_SENSOR_1 1
|
||||
opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD"
|
||||
exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD" "$3"
|
||||
|
||||
#
|
||||
# Mixing Extruder
|
||||
@ -72,7 +72,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY35_36
|
||||
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
opt_set MIXING_STEPPERS 2
|
||||
exec_test $1 $2 "Mixing Extruder"
|
||||
exec_test $1 $2 "Mixing Extruder" "$3"
|
||||
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
@ -97,7 +97,7 @@ opt_set Y_MIN_ENDSTOP_INVERTING true
|
||||
opt_add X_CS_PIN 46
|
||||
opt_add Y_CS_PIN 47
|
||||
opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
|
||||
exec_test $1 $2 "Teensy 3.5/3.6 COREXY"
|
||||
exec_test $1 $2 "Teensy 3.5/3.6 COREXY" "$3"
|
||||
|
||||
#
|
||||
# Enable COREXZ
|
||||
@ -105,7 +105,7 @@ exec_test $1 $2 "Teensy 3.5/3.6 COREXY"
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY35_36
|
||||
opt_enable COREXZ
|
||||
exec_test $1 $2 "Teensy 3.5/3.6 COREXZ"
|
||||
exec_test $1 $2 "Teensy 3.5/3.6 COREXZ" "$3"
|
||||
|
||||
#
|
||||
# Enable Dual Z with Dual Z endstops
|
||||
@ -116,7 +116,7 @@ opt_set NUM_Z_STEPPER_DRIVERS 2
|
||||
opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
|
||||
pins_set ramps/RAMPS X_MAX_PIN -1
|
||||
opt_add Z2_MAX_PIN 2
|
||||
exec_test $1 $2 "Dual Z with Dual Z endstops"
|
||||
exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
|
||||
|
||||
# Clean up
|
||||
restore_configs
|
||||
|
||||
@ -8,7 +8,7 @@ set -e
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY41
|
||||
exec_test $1 $2 "Teensy4.1 with default config"
|
||||
exec_test $1 $2 "Teensy4.1 with default config" "$3"
|
||||
|
||||
#
|
||||
# Test as many features together as possible
|
||||
@ -30,7 +30,7 @@ opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
|
||||
opt_add EXTUI_EXAMPLE
|
||||
opt_set I2C_SLAVE_ADDRESS 63
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "Teensy4.1 with many features"
|
||||
exec_test $1 $2 "Teensy4.1 with many features" "$3"
|
||||
|
||||
#
|
||||
# Test a Sled Z Probe with Linear leveling
|
||||
@ -38,7 +38,7 @@ exec_test $1 $2 "Teensy4.1 with many features"
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY41
|
||||
opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
|
||||
exec_test $1 $2 "Sled Z Probe with Linear leveling"
|
||||
exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
|
||||
|
||||
#
|
||||
# Test a Servo Probe
|
||||
@ -65,7 +65,7 @@ opt_set EXTRUDERS 2
|
||||
opt_set TEMP_SENSOR_1 1
|
||||
opt_set SERIAL_PORT_2 -2
|
||||
opt_enable EEPROM_SETTINGS MAGNETIC_PARKING_EXTRUDER
|
||||
exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD"
|
||||
exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" "$3"
|
||||
|
||||
#
|
||||
# Mixing Extruder
|
||||
@ -74,7 +74,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY41
|
||||
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL
|
||||
opt_set MIXING_STEPPERS 2
|
||||
exec_test $1 $2 "Mixing Extruder"
|
||||
exec_test $1 $2 "Mixing Extruder" "$3"
|
||||
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
@ -99,7 +99,7 @@ opt_set Y_MIN_ENDSTOP_INVERTING true
|
||||
opt_add X_CS_PIN 46
|
||||
opt_add Y_CS_PIN 47
|
||||
opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
|
||||
exec_test $1 $2 "Teensy 4.0/4.1 COREXY"
|
||||
exec_test $1 $2 "Teensy 4.0/4.1 COREXY" "$3"
|
||||
|
||||
#
|
||||
# Enable COREXZ
|
||||
@ -107,7 +107,7 @@ exec_test $1 $2 "Teensy 4.0/4.1 COREXY"
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY41
|
||||
opt_enable COREXZ
|
||||
exec_test $1 $2 "Teensy 4.0/4.1 COREXZ"
|
||||
exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" "$3"
|
||||
|
||||
#
|
||||
# Enable Dual Z with Dual Z endstops
|
||||
@ -118,7 +118,7 @@ opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
|
||||
opt_set NUM_Z_STEPPER_DRIVERS 2
|
||||
pins_set ramps/RAMPS X_MAX_PIN -1
|
||||
opt_add Z2_MAX_PIN 2
|
||||
exec_test $1 $2 "Dual Z with Dual Z endstops"
|
||||
exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
|
||||
|
||||
# Clean up
|
||||
restore_configs
|
||||
|
||||
19
docker-compose.yml
Normal file
19
docker-compose.yml
Normal file
@ -0,0 +1,19 @@
|
||||
version: "3.8"
|
||||
services:
|
||||
# The main image: this doesn't run any particular command, but is mainly used
|
||||
# for running tests locally
|
||||
marlin:
|
||||
image: marlin-dev
|
||||
build:
|
||||
dockerfile: Dockerfile
|
||||
context: docker
|
||||
working_dir: /code
|
||||
volumes:
|
||||
- .:/code
|
||||
- platformio-cache:/root/.platformio
|
||||
|
||||
volumes:
|
||||
# This volume holds installed libraries for PlatformIO. If this is deleted you
|
||||
# will have to download all the dependencies again, which can be a very slow
|
||||
# process
|
||||
platformio-cache:
|
||||
7
docker/Dockerfile
Normal file
7
docker/Dockerfile
Normal file
@ -0,0 +1,7 @@
|
||||
FROM python:3.9.0-buster
|
||||
|
||||
RUN pip install -U https://github.com/platformio/platformio-core/archive/develop.zip
|
||||
RUN platformio update
|
||||
# To get the test platforms
|
||||
RUN pip install PyYaml
|
||||
#ENV PATH /code/buildroot/bin/:/code/buildroot/tests/:${PATH}
|
||||
12
get_test_targets.py
Normal file
12
get_test_targets.py
Normal file
@ -0,0 +1,12 @@
|
||||
#!/usr/bin/env python
|
||||
"""
|
||||
Extract the builds used in Github CI, so that we can run them locally
|
||||
"""
|
||||
import yaml
|
||||
|
||||
|
||||
with open('.github/workflows/test-builds.yml') as f:
|
||||
github_configuration = yaml.safe_load(f)
|
||||
test_platforms = github_configuration\
|
||||
['jobs']['test_builds']['strategy']['matrix']['test-platform']
|
||||
print(' '.join(test_platforms))
|
||||
Loading…
Reference in New Issue
Block a user