3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-30 07:17:59 +00:00
Code Issues Releases Wiki Activity

✨ PLR_BED_THRESHOLD (#26649)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Vovodroid 2024-01-10 07:13:10 +02:00 committed by GitHub
parent 85ded0b9bd
commit 1d46e67de2
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
9 changed files with 63 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
Marlin/Configuration_adv.h
View File

@ -1743,19 +1743,20 @@
*/
//#define POWER_LOSS_RECOVERY
#if ENABLED(POWER_LOSS_RECOVERY)
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
//#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
//#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor
//#define POWER_LOSS_PULLDOWN
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
// especially with "vase mode" printing. Set too high and vases cannot be continued.
#define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
// Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
//#define POWER_LOSS_RECOVER_ZHOME

4
Marlin/src/feature/powerloss.cpp
View File

@ -37,6 +37,10 @@
bool PrintJobRecovery::enabled; // Initialized by settings.load()
#if HAS_PLR_BED_THRESHOLD
celsius_t PrintJobRecovery::bed_temp_threshold; // Initialized by settings.load()
#endif
MediaFile PrintJobRecovery::file;
job_recovery_info_t PrintJobRecovery::info;
const char PrintJobRecovery::filename[5] = "/PLR";

4
Marlin/src/feature/powerloss.h
View File

@ -175,6 +175,10 @@ class PrintJobRecovery {
static void enable(const bool onoff);
static void changed();
#if HAS_PLR_BED_THRESHOLD
static celsius_t bed_temp_threshold;
#endif
static bool exists() { return card.jobRecoverFileExists(); }
static void open(const bool read) { card.openJobRecoveryFile(read); }
static void close() { file.close(); }

9
Marlin/src/gcode/feature/powerloss/M1000.cpp
View File

@ -28,6 +28,10 @@
#include "../../../feature/powerloss.h"
#include "../../../module/motion.h"
#if HAS_PLR_BED_THRESHOLD
#include "../../../module/temperature.h" // for degBed
#endif
#include "../../../lcd/marlinui.h"
#if ENABLED(EXTENSIBLE_UI)
#include "../../../lcd/extui/ui_api.h"
@ -60,12 +64,15 @@ inline void plr_error(FSTR_P const prefix) {
/**
* M1000: Resume from power-loss (undocumented)
* - With 'S' go to the Resume/Cancel menu
* ...unless the bed temperature is already above a configured minimum temperature.
* - With no parameters, run recovery commands
*/
void GcodeSuite::M1000() {
if (recovery.valid()) {
if (parser.seen_test('S')) {
const bool force_resume = TERN0(HAS_PLR_BED_THRESHOLD, recovery.bed_temp_threshold && (thermalManager.degBed() >= recovery.bed_temp_threshold));
if (!force_resume && parser.seen_test('S')) {
#if HAS_MARLINUI_MENU
ui.goto_screen(menu_job_recovery);
#elif HAS_DWIN_E3V2_BASIC

14
Marlin/src/gcode/feature/powerloss/M413.cpp
View File

@ -35,6 +35,9 @@
* Parameters
* S[bool] - Flag to enable / disable.
* If omitted, report current state.
*
* With PLR_BED_THRESHOLD:
* B Bed Temperature above which recovery will proceed without asking permission.
*/
void GcodeSuite::M413() {
@ -43,6 +46,11 @@ void GcodeSuite::M413() {
else
M413_report();
#if HAS_PLR_BED_THRESHOLD
if (parser.seenval('B'))
recovery.bed_temp_threshold = parser.value_celsius();
#endif
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
if (parser.seen("RL")) recovery.load();
if (parser.seen_test('W')) recovery.save(true);
@ -57,7 +65,11 @@ void GcodeSuite::M413() {
void GcodeSuite::M413_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, F(STR_POWER_LOSS_RECOVERY));
SERIAL_ECHOPGM(" M413 S", AS_DIGIT(recovery.enabled), " ; ");
SERIAL_ECHOPGM(" M413 S", AS_DIGIT(recovery.enabled)
#if HAS_PLR_BED_THRESHOLD
, " B", recovery.bed_temp_threshold
#endif
);
serialprintln_onoff(recovery.enabled);
}

5
Marlin/src/inc/Conditionals_adv.h
View File

@ -1355,3 +1355,8 @@
#if DISABLED(INCH_MODE_SUPPORT)
#undef MANUAL_MOVE_DISTANCE_IN
#endif
// Power-Loss Recovery
#if ENABLED(POWER_LOSS_RECOVERY) && defined(PLR_BED_THRESHOLD)
#define HAS_PLR_BED_THRESHOLD 1
#endif

1
Marlin/src/lcd/language/language_en.h
View File

@ -501,6 +501,7 @@ namespace LanguageNarrow_en {
LSTR MSG_RESUME_PRINT = _UxGT("Resume Print");
LSTR MSG_STOP_PRINT = _UxGT("Stop Print");
LSTR MSG_OUTAGE_RECOVERY = _UxGT("Power Outage");
LSTR MSG_RESUME_BED_TEMP = _UxGT("Resume Bed Temp");
LSTR MSG_HOST_START_PRINT = _UxGT("Host Start");
LSTR MSG_PRINTING_OBJECT = _UxGT("Print Obj");
LSTR MSG_CANCEL_OBJECT = _UxGT("Cancel Obj");

3
Marlin/src/lcd/menu/menu_configuration.cpp
View File

@ -640,6 +640,9 @@ void menu_configuration() {
#if ENABLED(POWER_LOSS_RECOVERY)
EDIT_ITEM(bool, MSG_OUTAGE_RECOVERY, &recovery.enabled, recovery.changed);
#if HAS_PLR_BED_THRESHOLD
EDIT_ITEM(int3, MSG_RESUME_BED_TEMP, &recovery.bed_temp_threshold, 0, BED_MAX_TARGET);
#endif
#endif
// Preheat configurations

19
Marlin/src/module/settings.cpp
View File

@ -444,6 +444,7 @@ typedef struct SettingsDataStruct {
// POWER_LOSS_RECOVERY
//
bool recovery_enabled; // M413 S
celsius_t bed_temp_threshold; // M413 B
//
// FWRETRACT
@ -1268,8 +1269,10 @@ void MarlinSettings::postprocess() {
//
{
_FIELD_TEST(recovery_enabled);
const bool recovery_enabled = TERN(POWER_LOSS_RECOVERY, recovery.enabled, ENABLED(PLR_ENABLED_DEFAULT));
const bool recovery_enabled = TERN0(POWER_LOSS_RECOVERY, recovery.enabled);
const celsius_t bed_temp_threshold = TERN0(HAS_PLR_BED_THRESHOLD, recovery.bed_temp_threshold);
EEPROM_WRITE(recovery_enabled);
EEPROM_WRITE(bed_temp_threshold);
}
//
@ -2310,10 +2313,15 @@ void MarlinSettings::postprocess() {
// Power-Loss Recovery
//
{
bool recovery_enabled;
_FIELD_TEST(recovery_enabled);
bool recovery_enabled;
celsius_t bed_temp_threshold;
EEPROM_READ(recovery_enabled);
TERN_(POWER_LOSS_RECOVERY, if (!validating) recovery.enabled = recovery_enabled);
EEPROM_READ(bed_temp_threshold);
if (!validating) {
TERN_(POWER_LOSS_RECOVERY, recovery.enabled = recovery_enabled);
TERN_(HAS_PLR_BED_THRESHOLD, recovery.bed_temp_threshold = bed_temp_threshold);
}
}
//
@ -3460,7 +3468,10 @@ void MarlinSettings::reset() {
//
// Power-Loss Recovery
//
TERN_(POWER_LOSS_RECOVERY, recovery.enable(ENABLED(PLR_ENABLED_DEFAULT)));
#if ENABLED(POWER_LOSS_RECOVERY)
recovery.enable(ENABLED(PLR_ENABLED_DEFAULT));
TERN_(HAS_PLR_BED_THRESHOLD, recovery.bed_temp_threshold = PLR_BED_THRESHOLD);
#endif
//
// Firmware Retraction