3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-29 23:07:42 +00:00
Code Issues Releases Wiki Activity

Apply lowercase to some common methods

Browse Source
This commit is contained in:
Scott Lahteine 2018-02-28 16:54:09 -06:00
parent 8fff2fad23
commit 1f3ddd2c33
5 changed files with 34 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/Marlin_main.cpp
View File

@ -10073,7 +10073,7 @@ inline void gcode_M226() {
NOLESS(thermalManager.lpq_len, 0);
#endif
thermalManager.updatePID();
thermalManager.update_pid();
SERIAL_ECHO_START();
#if ENABLED(PID_PARAMS_PER_HOTEND)
SERIAL_ECHOPAIR(" e:", e); // specify extruder in serial output
@ -10219,7 +10219,7 @@ inline void gcode_M303() {
KEEPALIVE_STATE(NOT_BUSY);
#endif
thermalManager.PID_autotune(temp, e, c, u);
thermalManager.pid_autotune(temp, e, c, u);
#if DISABLED(BUSY_WHILE_HEATING)
KEEPALIVE_STATE(IN_HANDLER);

2
Marlin/configuration_store.cpp
View File

@ -308,7 +308,7 @@ void MarlinSettings::postprocess() {
#endif
#if ENABLED(PIDTEMP)
thermalManager.updatePID();
thermalManager.update_pid();
#endif
#if DISABLED(NO_VOLUMETRICS)

42
Marlin/temperature.cpp
View File

@ -247,7 +247,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
* Alternately heat and cool the nozzle, observing its behavior to
* determine the best PID values to achieve a stable temperature.
*/
void Temperature::PID_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result/*=false*/) {
void Temperature::pid_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result/*=false*/) {
float current = 0.0;
int cycles = 0;
bool heating = true;
@ -327,7 +327,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
const millis_t ms = millis();
if (temp_meas_ready) { // temp sample ready
updateTemperaturesFromRawValues();
calculate_celsius_temperatures();
// Get the current temperature and constrain it
current = GHV(current_temperature_bed, current_temperature[hotend]);
@ -336,7 +336,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
#if HAS_AUTO_FAN
if (ELAPSED(ms, next_auto_fan_check_ms)) {
checkExtruderAutoFans();
check_extruder_auto_fans();
next_auto_fan_check_ms = ms + 2500UL;
}
#endif
@ -483,7 +483,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
PID_PARAM(Kp, hotend) = workKp; \
PID_PARAM(Ki, hotend) = scalePID_i(workKi); \
PID_PARAM(Kd, hotend) = scalePID_d(workKd); \
updatePID(); }while(0)
update_pid(); }while(0)
// Use the result? (As with "M303 U1")
if (set_result) {
@ -524,7 +524,7 @@ int Temperature::getHeaterPower(const int heater) {
#if HAS_AUTO_FAN
void Temperature::checkExtruderAutoFans() {
void Temperature::check_extruder_auto_fans() {
static const pin_t fanPin[] PROGMEM = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN, E4_AUTO_FAN_PIN, CHAMBER_AUTO_FAN_PIN };
static const uint8_t fanBit[] PROGMEM = {
0,
@ -764,7 +764,7 @@ void Temperature::manage_heater() {
if (!temp_meas_ready) return;
updateTemperaturesFromRawValues(); // also resets the watchdog
calculate_celsius_temperatures(); // also resets the watchdog
#if ENABLED(HEATER_0_USES_MAX6675)
if (current_temperature[0] > MIN(HEATER_0_MAXTEMP, MAX6675_TMAX - 1.0)) max_temp_error(0);
@ -809,7 +809,7 @@ void Temperature::manage_heater() {
#if HAS_AUTO_FAN
if (ELAPSED(ms, next_auto_fan_check_ms)) { // only need to check fan state very infrequently
checkExtruderAutoFans();
check_extruder_auto_fans();
next_auto_fan_check_ms = ms + 2500UL;
}
#endif
@ -919,7 +919,7 @@ void Temperature::manage_heater() {
// Derived from RepRap FiveD extruder::getTemperature()
// For hot end temperature measurement.
float Temperature::analog2temp(const int raw, const uint8_t e) {
float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
if (e > HOTENDS)
#else
@ -991,7 +991,7 @@ float Temperature::analog2temp(const int raw, const uint8_t e) {
#if HAS_HEATED_BED
// Derived from RepRap FiveD extruder::getTemperature()
// For bed temperature measurement.
float Temperature::analog2tempBed(const int raw) {
float Temperature::analog_to_celsius_bed(const int raw) {
#if ENABLED(HEATER_BED_USES_THERMISTOR)
SCAN_THERMISTOR_TABLE(BEDTEMPTABLE, BEDTEMPTABLE_LEN);
#elif ENABLED(HEATER_BED_USES_AD595)
@ -1007,7 +1007,7 @@ float Temperature::analog2temp(const int raw, const uint8_t e) {
#if HAS_TEMP_CHAMBER
// Derived from RepRap FiveD extruder::getTemperature()
// For chamber temperature measurement.
float Temperature::analog2tempChamber(const int raw) {
float Temperature::analog_to_celsius_chamber(const int raw) {
#if ENABLED(HEATER_CHAMBER_USES_THERMISTOR)
SCAN_THERMISTOR_TABLE(CHAMBERTEMPTABLE, CHAMBERTEMPTABLE_LEN);
#elif ENABLED(HEATER_CHAMBER_USES_AD595)
@ -1026,22 +1026,22 @@ float Temperature::analog2temp(const int raw, const uint8_t e) {
* and this function is called from normal context
* as it would block the stepper routine.
*/
void Temperature::updateTemperaturesFromRawValues() {
void Temperature::calculate_celsius_temperatures() {
#if ENABLED(HEATER_0_USES_MAX6675)
current_temperature_raw[0] = read_max6675();
#endif
HOTEND_LOOP() current_temperature[e] = Temperature::analog2temp(current_temperature_raw[e], e);
HOTEND_LOOP() current_temperature[e] = analog_to_celsius_hotend(current_temperature_raw[e], e);
#if HAS_HEATED_BED
current_temperature_bed = Temperature::analog2tempBed(current_temperature_bed_raw);
current_temperature_bed = analog_to_celsius_bed(current_temperature_bed_raw);
#endif
#if HAS_TEMP_CHAMBER
current_temperature_chamber = Temperature::analog2tempChamber(current_temperature_chamber_raw);
current_temperature_chamber = analog_to_celsius_chamber(current_temperature_chamber_raw);
#endif
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
redundant_temperature = Temperature::analog2temp(redundant_temperature_raw, 1);
redundant_temperature = analog_to_celsius_hotend(redundant_temperature_raw, 1);
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
filament_width_meas = analog2widthFil();
filament_width_meas = analog_to_mm_fil_width();
#endif
#if ENABLED(USE_WATCHDOG)
@ -1056,7 +1056,7 @@ void Temperature::updateTemperaturesFromRawValues() {
#if ENABLED(FILAMENT_WIDTH_SENSOR)
// Convert raw Filament Width to millimeters
float Temperature::analog2widthFil() {
float Temperature::analog_to_mm_fil_width() {
return current_raw_filwidth * 5.0f * (1.0f / 16383.0);
}
@ -1256,7 +1256,7 @@ void Temperature::init() {
#define TEMP_MIN_ROUTINE(NR) \
minttemp[NR] = HEATER_ ##NR## _MINTEMP; \
while (analog2temp(minttemp_raw[NR], NR) < HEATER_ ##NR## _MINTEMP) { \
while (analog_to_celsius_hotend(minttemp_raw[NR], NR) < HEATER_ ##NR## _MINTEMP) { \
if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \
minttemp_raw[NR] += OVERSAMPLENR; \
else \
@ -1264,7 +1264,7 @@ void Temperature::init() {
}
#define TEMP_MAX_ROUTINE(NR) \
maxttemp[NR] = HEATER_ ##NR## _MAXTEMP; \
while (analog2temp(maxttemp_raw[NR], NR) > HEATER_ ##NR## _MAXTEMP) { \
while (analog_to_celsius_hotend(maxttemp_raw[NR], NR) > HEATER_ ##NR## _MAXTEMP) { \
if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \
maxttemp_raw[NR] -= OVERSAMPLENR; \
else \
@ -1312,7 +1312,7 @@ void Temperature::init() {
#if HAS_HEATED_BED
#ifdef BED_MINTEMP
while (analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) {
while (analog_to_celsius_bed(bed_minttemp_raw) < BED_MINTEMP) {
#if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP
bed_minttemp_raw += OVERSAMPLENR;
#else
@ -1321,7 +1321,7 @@ void Temperature::init() {
}
#endif // BED_MINTEMP
#ifdef BED_MAXTEMP
while (analog2tempBed(bed_maxttemp_raw) > BED_MAXTEMP) {
while (analog_to_celsius_bed(bed_maxttemp_raw) > BED_MAXTEMP) {
#if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP
bed_maxttemp_raw -= OVERSAMPLENR;
#else

16
Marlin/temperature.h
View File

@ -318,13 +318,13 @@ class Temperature {
/**
* Static (class) methods
*/
static float analog2temp(const int raw, const uint8_t e);
static float analog_to_celsius_hotend(const int raw, const uint8_t e);
#if HAS_HEATED_BED
static float analog2tempBed(const int raw);
static float analog_to_celsius_bed(const int raw);
#endif
#if HAS_TEMP_CHAMBER
static float analog2tempChamber(const int raw);
static float analog_to_celsius_chamber(const int raw);
#endif
/**
@ -365,7 +365,7 @@ class Temperature {
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
static float analog2widthFil(); // Convert raw Filament Width to millimeters
static float analog_to_mm_fil_width(); // Convert raw Filament Width to millimeters
static int8_t widthFil_to_size_ratio(); // Convert Filament Width (mm) to an extrusion ratio
#endif
@ -489,13 +489,13 @@ class Temperature {
* Perform auto-tuning for hotend or bed in response to M303
*/
#if HAS_PID_HEATING
static void PID_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result=false);
static void pid_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result=false);
/**
* Update the temp manager when PID values change
*/
#if ENABLED(PIDTEMP)
FORCE_INLINE static void updatePID() {
FORCE_INLINE static void update_pid() {
#if ENABLED(PID_EXTRUSION_SCALING)
last_e_position = 0;
#endif
@ -612,13 +612,13 @@ class Temperature {
static void set_current_temp_raw();
static void updateTemperaturesFromRawValues();
static void calculate_celsius_temperatures();
#if ENABLED(HEATER_0_USES_MAX6675)
static int read_max6675();
#endif
static void checkExtruderAutoFans();
static void check_extruder_auto_fans();
static float get_pid_output(const int8_t e);

4
Marlin/ultralcd.cpp
View File

@ -3414,14 +3414,14 @@ void lcd_quick_feedback(const bool clear_buttons) {
UNUSED(e);
#endif
PID_PARAM(Ki, e) = scalePID_i(raw_Ki);
thermalManager.updatePID();
thermalManager.update_pid();
}
void copy_and_scalePID_d(int16_t e) {
#if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1
UNUSED(e);
#endif
PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
thermalManager.updatePID();
thermalManager.update_pid();
}
#define _DEFINE_PIDTEMP_BASE_FUNCS(N) \
void copy_and_scalePID_i_E ## N() { copy_and_scalePID_i(N); } \