3DPrinting/MarlinFirmware
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2025-01-31 06:02:16 +00:00
Code Issues Releases Wiki Activity

✨ Mellow Fly E3 V2 (STM32F407VG) (#26081)

Browse source
This commit is contained in:
jaysuk 2023-08-26 00:43:57 +01:00 committed by GitHub
parent 8fa6a4da2e
commit 209fadd2e6
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
6 changed files with 545 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
Marlin/src/core/boards.h
View file

@ -459,6 +459,7 @@
#define BOARD_CREALITY_F401RE 5245 // Creality CR4NS200141C13 (STM32F401RE) as found in the Ender-5 S1
#define BOARD_BLACKPILL_CUSTOM 5246 // Custom board based on STM32F401CDU6.
#define BOARD_I3DBEEZ9_V1 5247 // I3DBEEZ9 V1 (STM32F407ZG)
#define BOARD_MELLOW_FLY_E3_V2 5248 // Mellow Fly E3 V2 (STM32F407VG)
//
// ARM Cortex-M7

2
Marlin/src/pins/pins.h
View file

@ -804,6 +804,8 @@
#include "stm32f4/pins_BLACKPILL_CUSTOM.h" // STM32F4 env:STM32F401CD_blackpill_stlink
#elif MB(I3DBEEZ9_V1)
#include "stm32f4/pins_I3DBEEZ9.h" // STM32F4 env:I3DBEEZ9_V1
#elif MB(MELLOW_FLY_E3_V2)
#include "stm32f4/pins_MELLOW_FLY_E3_V2.h" // STM32F4 env:FLY_E3_V2
//
// ARM Cortex-M7

2
Marlin/src/pins/stm32f4/pins_CREALITY_F401.h
View file

@ -140,7 +140,7 @@
//#define LED_CONTROL_PIN PA7
//
// WiFI Reset
// WiFi Reset
//
#ifdef MENU_RESET_WIFI
#define RESET_WIFI_PIN PB12

521
Marlin/src/pins/stm32f4/pins_MELLOW_FLY_E3_V2.h Normal file
View file

@ -0,0 +1,521 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if NOT_TARGET(STM32F4)
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#endif
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "Mellow Fly E3 V2"
#endif
// If you have the BigTreeTech driver expansion module, enable BTT_MOTOR_EXPANSION
// https://github.com/bigtreetech/BTT-Expansion-module/tree/master/BTT%20EXP-MOT
//#define BTT_MOTOR_EXPANSION
#if ALL(HAS_WIRED_LCD, BTT_MOTOR_EXPANSION)
#if ANY(CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY)
#define EXP_MOT_USE_EXP2_ONLY 1
#else
#error "You can't use both an LCD and a Motor Expansion Module on EXP1/EXP2 at the same time."
#endif
#endif
// Use one of these or SDCard-based Emulation will be used
#if NO_EEPROM_SELECTED
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
#endif
#if ENABLED(FLASH_EEPROM_EMULATION)
// Decrease delays and flash wear by spreading writes across the
// 128 kB sector allocated for EEPROM emulation.
#define FLASH_EEPROM_LEVELING
#endif
//
// Servos
//
#define SERVO0_PIN PE6 // SERVOS
//
// Trinamic Stallguard pins
//
#define X_DIAG_PIN PE7 // X-STOP
#define Y_DIAG_PIN PE8 // Y-STOP
#define Z_DIAG_PIN PE9 // Z-STOP
//
// Limit Switches
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#else
#define X_STOP_PIN PE7 // X-STOP
#endif
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#else
#define Y_STOP_PIN PE8 // Y-STOP
#endif
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#else
#ifndef Z_STOP_PIN
#define Z_STOP_PIN PE9 // Z-STOP
#endif
#endif
//
// Z Probe must be this pin
//
#define Z_MIN_PROBE_PIN PC2 // PROBE
//
// Probe enable
//
#if ENABLED(PROBE_ENABLE_DISABLE)
#ifndef PROBE_ENABLE_PIN
#define PROBE_ENABLE_PIN SERVO0_PIN
#endif
#endif
//
// Steppers
//
#define X_ENABLE_PIN PC1
#define X_STEP_PIN PE5
#define X_DIR_PIN PC0
#ifndef X_CS_PIN
#define X_CS_PIN PC15
#endif
#define Y_ENABLE_PIN PC14
#define Y_STEP_PIN PE4
#define Y_DIR_PIN PC13
#ifndef Y_CS_PIN
#define Y_CS_PIN PB6
#endif
#define Z_ENABLE_PIN PE3
#define Z_STEP_PIN PE1
#define Z_DIR_PIN PB7
#ifndef Z_CS_PIN
#define Z_CS_PIN PD7
#endif
#define E0_ENABLE_PIN PD6
#define E0_STEP_PIN PE2
#define E0_DIR_PIN PD5
#ifndef E0_CS_PIN
#define E0_CS_PIN PD4
#endif
#define E1_ENABLE_PIN PD3
#define E1_STEP_PIN PE0
#define E1_DIR_PIN PD1
#ifndef E1_CS_PIN
#define E1_CS_PIN PD0
#endif
//
// Temperature Sensors
//
#define TEMP_BED_PIN PB1 // Analog Input "TB"
#define TEMP_0_PIN PC4 // Analog Input "TH0"
#define TEMP_1_PIN PC5 // Analog Input "TH0"
//
// Heaters / Fans
//
#ifndef HEATER_BED_PIN
#define HEATER_BED_PIN PB0 // "HB"
#endif
#ifndef HEATER_0_PIN
#define HEATER_0_PIN PC6 // "HE0"
#endif
#ifndef HEATER_1_PIN
#define HEATER_1_PIN PC7 // "HE0"
#endif
#ifndef FAN0_PIN
#define FAN0_PIN PA0 // "FAN0"
#endif
#ifndef FAN1_PIN
#define FAN1_PIN PA1
#endif
#ifndef FAN2_PIN
#define FAN2_PIN PA2
#endif
#ifndef FAN3_PIN
#define FAN3_PIN PA3
#endif
#ifndef TMC_SPI_MOSI
#define TMC_SPI_MOSI PB5
#endif
#ifndef TMC_SPI_MISO
#define TMC_SPI_MISO PB4
#endif
#ifndef TMC_SPI_SCK
#define TMC_SPI_SCK PB3
#endif
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial1
//#define X2_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Y2_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define Z2_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E4_HARDWARE_SERIAL Serial1
//
// Software serial
//
#define X_SERIAL_TX_PIN PC15
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN PB6
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN PD7
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN PD4
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN PD0
#define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#ifndef TMC_BAUD_RATE
#define TMC_BAUD_RATE 19200
#endif
#endif // HAS_TMC_UART
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
/**
* Fly-E3-v2
* ------ ------
* (BEEPER) PD10 | 1 2 | PA9 (BTN_ENC) (MISO) PA6 | 1 2 | PA5 (SCK)
* (LCD_EN) PA8 | 3 4 | PA10 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA4 (SD_SS)
* (LCD_D4) PE15 | 5 6 PE14 (LCD_D5) (BTN_EN2) PB10 | 5 6 | PA7 (MOSI)
* (LCD_D6) PA14 | 7 8 | PA13 (LCD_D7) (SD_DETECT) PE13 | 7 8 | RESET
* GND | 9 10 | 5V GND | 9 10 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_01_PIN PD10
#define EXP1_02_PIN PA9
#define EXP1_03_PIN PA8
#define EXP1_04_PIN PA10
#define EXP1_05_PIN PE15
#define EXP1_06_PIN PE14
#define EXP1_07_PIN PA14
#define EXP1_08_PIN PA13
#define EXP2_01_PIN PA6
#define EXP2_02_PIN PA5
#define EXP2_03_PIN PB11
#define EXP2_04_PIN PA4
#define EXP2_05_PIN PB10
#define EXP2_06_PIN PA7
#define EXP2_07_PIN PE13
#define EXP2_08_PIN -1
//
// Onboard SD card
// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
//
#if SD_CONNECTION_IS(LCD)
#define SDSS EXP2_04_PIN
#define SD_SS_PIN SDSS
#define SD_SCK_PIN EXP2_02_PIN
#define SD_MISO_PIN EXP2_01_PIN
#define SD_MOSI_PIN EXP2_06_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#elif SD_CONNECTION_IS(ONBOARD)
#define ONBOARD_SDIO // Use SDIO for onboard SD
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
#if ENABLED(BTT_MOTOR_EXPANSION)
/** ----- -----
* -- | . . | GND -- | . . | GND
* -- | . . | M1EN M2EN | . . | M3EN
* M1STP | . . M1DIR M1RX | . . M1DIAG
* M2DIR | . . | M2STP M2RX | . . | M2DIAG
* M3DIR | . . | M3STP M3RX | . . | M3DIAG
* ----- -----
* EXP2 EXP1
*
* NB In EXP_MOT_USE_EXP2_ONLY mode EXP1 is not used and M2EN and M3EN need to be jumpered to M1EN
*/
// M1 on Driver Expansion Module
#define E2_STEP_PIN EXP2_06_PIN
#define E2_DIR_PIN EXP2_05_PIN
#define E2_ENABLE_PIN EXP2_07_PIN
#if !EXP_MOT_USE_EXP2_ONLY
#define E2_DIAG_PIN EXP1_05_PIN
#define E2_CS_PIN EXP1_06_PIN
#if HAS_TMC_UART
#define E2_SERIAL_TX_PIN EXP1_06_PIN
#define E2_SERIAL_RX_PIN EXP1_06_PIN
#endif
#endif
// M2 on Driver Expansion Module
#define E3_STEP_PIN EXP2_03_PIN
#define E3_DIR_PIN EXP2_04_PIN
#if !EXP_MOT_USE_EXP2_ONLY
#define E3_ENABLE_PIN EXP1_08_PIN
#define E3_DIAG_PIN EXP1_03_PIN
#define E3_CS_PIN EXP1_04_PIN
#if HAS_TMC_UART
#define E3_SERIAL_TX_PIN EXP1_04_PIN
#define E3_SERIAL_RX_PIN EXP1_04_PIN
#endif
#else
#define E3_ENABLE_PIN EXP2_07_PIN
#endif
// M3 on Driver Expansion Module
#define E4_STEP_PIN EXP2_01_PIN
#define E4_DIR_PIN EXP2_02_PIN
#if !EXP_MOT_USE_EXP2_ONLY
#define E4_ENABLE_PIN EXP1_07_PIN
#define E4_DIAG_PIN EXP1_01_PIN
#define E4_CS_PIN EXP1_02_PIN
#if HAS_TMC_UART
#define E4_SERIAL_TX_PIN EXP1_02_PIN
#define E4_SERIAL_RX_PIN EXP1_02_PIN
#endif
#else
#define E4_ENABLE_PIN EXP2_07_PIN
#endif
#endif // BTT_MOTOR_EXPANSION
//
// LCDs and Controllers
//
#if IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS EXP2_03_PIN
#endif
#elif HAS_WIRED_LCD
#define BEEPER_PIN EXP1_01_PIN
#define BTN_ENC EXP1_02_PIN
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define LCD_PINS_EN EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#elif ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_CS EXP1_06_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#else
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#define LCD_PINS_EN EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXP1_03_PIN
#define DOGLCD_A0 EXP1_04_PIN
//#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
#if ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXP1_06_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXP1_07_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXP1_08_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXP1_06_PIN
#endif
#endif // !FYSETC_MINI_12864
#if IS_ULTIPANEL
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_07_PIN
#define LCD_PINS_D7 EXP1_08_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
#endif
#endif
#endif // HAS_WIRED_LCD
#if HAS_SPI_TFT
#define TFT_SCK_PIN EXP2_02_PIN
#define TFT_MISO_PIN EXP2_01_PIN
#define TFT_MOSI_PIN EXP2_06_PIN
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif
#ifndef TFT_HEIGHT
#define TFT_HEIGHT 320
#endif
#if ENABLED(BTT_TFT35_SPI_V1_0)
// 480x320, 3.5", SPI Display with Rotary Encoder.
// Stock Display for the BIQU B1 SE.
#define TFT_CS_PIN EXP2_04_PIN
#define TFT_DC_PIN EXP2_07_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TOUCH_CS_PIN EXP1_04_PIN
#define TOUCH_SCK_PIN EXP1_05_PIN
#define TOUCH_MISO_PIN EXP1_06_PIN
#define TOUCH_MOSI_PIN EXP1_03_PIN
#define TOUCH_INT_PIN EXP1_07_PIN
#ifndef TOUCH_CALIBRATION_X
#define TOUCH_CALIBRATION_X 17540
#endif
#ifndef TOUCH_CALIBRATION_Y
#define TOUCH_CALIBRATION_Y -11388
#endif
#ifndef TOUCH_OFFSET_X
#define TOUCH_OFFSET_X -21
#endif
#ifndef TOUCH_OFFSET_Y
#define TOUCH_OFFSET_Y 337
#endif
#ifndef TOUCH_ORIENTATION
#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
#endif
#elif ENABLED(MKS_TS35_V2_0)
/** ------ ------
* BEEPER | 1 2 | BTN_ENC SPI1_MISO | 1 2 | SPI1_SCK
* TFT_BKL / LCD_EN | 3 4 | TFT_RESET / LCD_RS BTN_EN1 | 3 4 | SPI1_CS
* TOUCH_CS / LCD_D4 | 5 6 TOUCH_INT / LCD_D5 BTN_EN2 | 5 6 SPI1_MOSI
* SPI1_CS / LCD_D6 | 7 8 | SPI1_RS / LCD_D7 SPI1_RS | 7 8 | RESET
* GND | 9 10 | VCC GND | 9 10 | VCC
* ------ ------
* EXP1 EXP2
*/
#define TFT_CS_PIN EXP1_07_PIN // SPI1_CS
#define TFT_DC_PIN EXP1_08_PIN // SPI1_RS
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN EXP1_04_PIN
#define LCD_BACKLIGHT_PIN EXP1_03_PIN
#define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define TOUCH_CS_PIN EXP1_05_PIN // SPI1_NSS
#define TOUCH_SCK_PIN EXP2_02_PIN // SPI1_SCK
#define TOUCH_MISO_PIN EXP2_01_PIN // SPI1_MISO
#define TOUCH_MOSI_PIN EXP2_06_PIN // SPI1_MOSI
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#define TFT_BUFFER_SIZE 14400
#endif
#endif // HAS_SPI_TFT
// Alter timing for graphical display
#if IS_U8GLIB_ST7920
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 120
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 80
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 580
#endif
#endif
//#define POWER_MONITOR_VOLTAGE_PIN PC3
//
// WiFi
//
#if ENABLED(WIFISUPPORT)
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PE11
#define ESP_WIFI_MODULE_GPIO0_PIN PE10
#define ESP_WIFI_MODULE_GPIO4_PIN PE12
#endif

2
Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h
View file

@ -449,7 +449,7 @@
#endif
//
// WIFI
// WiFi
//
#if ENABLED(WIFISUPPORT)
/**

19
ini/stm32f4.ini
View file

@ -806,3 +806,22 @@ board_build.offset = 0x8000
build_flags = ${stm32_variant.build_flags} -DSTM32F407_5ZX
debug_tool = stlink
upload_protocol = stlink
#
# Mellow Fly E3 V2 (STM32F407VGT6 ARM Cortex-M4)
#
[env:FLY_E3_V2]
extends = stm32_variant
board = marlin_STM32F407VGT6_CCM
board_build.variant = MARLIN_F4x7Vx
board_build.offset = 0x8000
board_upload.offset_address = 0x08008000
build_flags = ${stm32_variant.build_flags}
-DHAVE_HWSERIAL1 -DHAVE_HWSERIAL3
-DPIN_SERIAL1_RX=PA_10 -DPIN_SERIAL1_TX=PA_9
-DPIN_SERIAL3_RX=PD_9 -DPIN_SERIAL3_TX=PD_8
-DHAL_SD_MODULE_ENABLED
-DUSE_USBHOST_HS -DUSE_USB_HS_IN_FS
-DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6
-DHSE_VALUE=8000000U
upload_protocol = stlink