From 22ae09ace498e735c216bbb726f2c3f39d5d714a Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 7 Aug 2021 16:06:51 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=94=A7=20Sanity-check=20DEFAULT=5FEJERK?= =?UTF-8?q?=20with=20LIN=5FADVANCE?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit See #20649 --- Marlin/src/inc/SanityCheck.h | 11 ++++------- Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h | 3 +-- 2 files changed, 5 insertions(+), 9 deletions(-) diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 9dfc24b064..da51f5ca9e 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -1210,6 +1210,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS ); #if ENABLED(S_CURVE_ACCELERATION) && DISABLED(EXPERIMENTAL_SCURVE) #error "LIN_ADVANCE and S_CURVE_ACCELERATION may not play well together! Enable EXPERIMENTAL_SCURVE to continue." + #elif ENABLED(DIRECT_STEPPING) + #error "DIRECT_STEPPING is incompatible with LIN_ADVANCE. Enable in external planner if possible." + #elif !HAS_JUNCTION_DEVIATION && defined(DEFAULT_EJERK) + static_assert(DEFAULT_EJERK >= 10, "It is strongly recommended to set DEFAULT_EJERK >= 10 when using LIN_ADVANCE."); #endif #endif @@ -3600,13 +3604,6 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #error "SAVED_POSITIONS must be an integer from 0 to 256." #endif -/** - * Stepper Chunk support - */ -#if BOTH(DIRECT_STEPPING, LIN_ADVANCE) - #error "DIRECT_STEPPING is incompatible with LIN_ADVANCE. Enable in external planner if possible." -#endif - /** * Touch Screen Calibration */ diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index bb4c0e8000..cb3d3242e2 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -126,11 +126,10 @@ #endif #endif - #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #if SD_CONNECTION_IS(LCD) && ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS) - #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_PINS_FOR_CS." + #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS." #endif #if SD_CONNECTION_IS(LCD)