diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index b2f0cc6394..10aeda5e8a 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -474,14 +474,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -489,7 +489,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index e470fc88f7..8a174aeb7b 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1298,19 +1298,30 @@ inline bool code_value_bool() { return !code_has_value() || code_value_byte() >
 #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
   inline void set_input_temp_units(TempUnit units) { input_temp_units = units; }
 
-  float temp_abs(const float &c) {
+  float to_temp_units(const float &c) {
     switch (input_temp_units) {
       case TEMPUNIT_F:
-        return (c - 32.0) * 0.5555555556;
+        return c * 0.5555555556 + 32.0;
       case TEMPUNIT_K:
-        return c - 273.15;
+        return c + 273.15;
       case TEMPUNIT_C:
       default:
         return c;
     }
   }
 
-  int16_t code_value_temp_abs() { return temp_abs(code_value_float()); }
+  int16_t code_value_temp_abs() {
+    const float c = code_value_float();
+    switch (input_temp_units) {
+      case TEMPUNIT_F:
+        return (int16_t)((c - 32.0) * 0.5555555556);
+      case TEMPUNIT_K:
+        return (int16_t)(c - 273.15);
+      case TEMPUNIT_C:
+      default:
+        return (int16_t)(c);
+    }
+  }
 
   int16_t code_value_temp_diff() {
     switch (input_temp_units) {
diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp
index ef7e040147..99495997b8 100644
--- a/Marlin/configuration_store.cpp
+++ b/Marlin/configuration_store.cpp
@@ -1257,8 +1257,8 @@ void MarlinSettings::reset() {
       CONFIG_ECHO_START;
       #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
         extern TempUnit input_temp_units;
-        extern float temp_abs(const float &f);
-        #define TEMP_UNIT(N) temp_abs(N)
+        extern float to_temp_units(const float &f);
+        #define TEMP_UNIT(N) to_temp_units(N)
         SERIAL_ECHOPGM("  M149 ");
         SERIAL_CHAR(input_temp_units == TEMPUNIT_K ? 'K' : input_temp_units == TEMPUNIT_F ? 'F' : 'C');
         SERIAL_ECHOPGM(" ; Units in ");
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index b029b4b533..39f857d9c8 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -473,14 +473,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.128, 71.128, 640, 152 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 20, 20 }
 
@@ -488,7 +488,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 100, 10000 }
 
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index eaf92c943d..bb74b12d1d 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -457,14 +457,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -472,7 +472,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 100, 80000 }
 
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index 506faaf036..14fc25e834 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -457,14 +457,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -472,7 +472,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 100, 80000 }
 
diff --git a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
index 7c39446376..1c473e035c 100644
--- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
+++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
@@ -480,14 +480,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 52.2 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 250, 2, 17 }
 
@@ -495,7 +495,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 4, 750 }
 
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 43be117b7d..8c611552a9 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -465,14 +465,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 100.47095761381482 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 3.3, 25 }
 
@@ -480,7 +480,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1100, 1100, 100, 10000 }
 
@@ -1149,7 +1149,7 @@
  * IMPORTANT: The U8glib library is required for Full Graphic Display!
  *            https://github.com/olikraus/U8glib_Arduino
  */
-#define ULTRA_LCD   // Character based
+//#define ULTRA_LCD   // Character based
 //#define DOGLCD      // Full graphics display
 
 /**
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index e40dbb7863..35f6aea296 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -468,14 +468,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 8000, 204 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 250, 2, 200 }
 
@@ -483,7 +483,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 800, 800, 20, 1000 }
 
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index d370fc8a7f..bd79a11a51 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -504,13 +504,13 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 64.25, 64.25, 2560, 600 }
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -518,7 +518,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h
index 4b11a6a38d..027ad29bc9 100644
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@@ -474,14 +474,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 134.74, 134.74, 4266.66, 148.7 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 160, 160, 10, 10000 }
 
@@ -489,7 +489,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
@@ -1158,7 +1158,7 @@
  * IMPORTANT: The U8glib library is required for Full Graphic Display!
  *            https://github.com/olikraus/U8glib_Arduino
  */
-#define ULTRA_LCD   // Character based
+//#define ULTRA_LCD   // Character based
 //#define DOGLCD      // Full graphics display
 
 /**
diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
index bd27e511b6..2b7a0b3e3b 100644
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@@ -474,14 +474,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 134.74, 134.74, 4266.66, 148.7 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 160, 160, 10, 10000 }
 
@@ -489,7 +489,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index d035246251..fad021c521 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -474,14 +474,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -489,7 +489,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 023e01653e..b00a75d8e0 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -471,7 +471,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
  // default steps per unit for RigidBot with standard hardware
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 44.3090, 22.1545, 1600, 53.5 }
@@ -480,7 +480,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -488,7 +488,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 800, 800, 100, 10000 }
 
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 251b466891..fcaf75b4e7 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -489,14 +489,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 103.69, 106.65, 200/1.25, 1000 }  // default steps per unit for SCARA
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 30, 25 }
 
@@ -504,7 +504,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 300, 300, 20, 1000 }
 
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index 117dab65e3..c31994a38e 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -494,14 +494,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100.5, 100.5, 400, 850 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 800, 800, 8, 50 }
 
@@ -509,7 +509,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h
index 48f8708ce1..662bd133ed 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration.h
@@ -525,14 +525,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 6400, 88.16 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 7, 35 }
 
@@ -540,7 +540,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index c28c8613da..25ec69ac66 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -465,14 +465,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 600.0*8/3, 102.073 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 350, 350, 7.2, 80 }
 
@@ -480,7 +480,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 10, 1000 }
 
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index e5d040e033..f95dfcc9c1 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -474,14 +474,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -489,7 +489,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
index 42f6b3f3e3..c92671783f 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
@@ -542,14 +542,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 100, 100 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 25 }
 
@@ -557,7 +557,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 4000, 4000, 4000, 4000 }
 
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
index 09122c2ac3..22e338003f 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@@ -549,14 +549,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 100, 90 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 200 }
 
@@ -564,7 +564,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 4000, 4000, 4000, 4000 }
 
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index aeee57b4dd..996100182f 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -538,14 +538,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 80, 760*1.1 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 500, 25 }
 
@@ -553,7 +553,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 2bfb11415a..0bf14708d3 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -538,14 +538,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 80, 760*1.1 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 500, 25 }
 
@@ -553,7 +553,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index a5d7161edc..bb769b1729 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -532,14 +532,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 184.8 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 200 }
 
@@ -547,7 +547,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 9000 }
 
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index d35301732d..b8038252eb 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -551,14 +551,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 158 }   // default steps per unit for PowerWasp
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 25 }
 
@@ -566,7 +566,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 
diff --git a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
index 984b225692..1e172d5f9b 100644
--- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
+++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
@@ -488,14 +488,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 96 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 25, 25 }
 
@@ -503,7 +503,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 800, 800, 700, 10000 }
 
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index dbe6e2e093..ea04d61018 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -477,14 +477,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 400, 400, 400, 163 }     // default steps per unit for ***** MakiBox A6 *****
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 60, 60, 20, 45 }
 
@@ -492,7 +492,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 30, 10000 }
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 9ce54e88f3..ecbca415f5 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -464,7 +464,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.1, 71.1, 2560, 600 } // David TVRR
 
@@ -475,7 +475,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 45 } // David TVRR
 
@@ -483,7 +483,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h
index acf6b11556..5d221d7018 100644
--- a/Marlin/example_configurations/wt150/Configuration.h
+++ b/Marlin/example_configurations/wt150/Configuration.h
@@ -479,14 +479,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.699959, 71.699959, 71.699959, 100.470955 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 83.333333, 83.333333, 19.5, 26.666666 }
 
@@ -494,7 +494,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1200, 1200, 100, 10000 }
 
diff --git a/Marlin/ubl.cpp b/Marlin/ubl.cpp
index b1d31fe680..0f0c928e25 100644
--- a/Marlin/ubl.cpp
+++ b/Marlin/ubl.cpp
@@ -136,16 +136,16 @@
 
   void unified_bed_leveling::display_map(const int map_type) {
     const bool map0 = map_type == 0;
-    const uint8_t spaces = 11;
+    constexpr uint8_t spaces = 11 * (GRID_MAX_POINTS_X - 2);
 
     if (map0) {
       SERIAL_PROTOCOLLNPGM("\nBed Topography Report:\n");
       serial_echo_xy(0, GRID_MAX_POINTS_Y - 1);
-      SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2) + 3);
+      SERIAL_ECHO_SP(spaces + 3);
       serial_echo_xy(GRID_MAX_POINTS_X - 1, GRID_MAX_POINTS_Y - 1);
       SERIAL_EOL;
       serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MAX_Y);
-      SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2)-3);
+      SERIAL_ECHO_SP(spaces - 3);
       serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MAX_Y);
       SERIAL_EOL;
     }
@@ -190,11 +190,11 @@
 
     if (map0) {
       serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MIN_Y);
-      SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2) + 1);
+      SERIAL_ECHO_SP(spaces + 1);
       serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MIN_Y);
       SERIAL_EOL;
       serial_echo_xy(0, 0);
-      SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2) + 5);
+      SERIAL_ECHO_SP(spaces + 5);
       serial_echo_xy(GRID_MAX_POINTS_X - 1, 0);
       SERIAL_EOL;
     }
diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp
index 414315b2c9..247ae27d65 100644
--- a/Marlin/ubl_G29.cpp
+++ b/Marlin/ubl_G29.cpp
@@ -389,8 +389,8 @@
     }
 
     if (code_seen('P')) {
-      if (WITHIN(phase_value,0,1) && ubl.state.eeprom_storage_slot==-1) {
-        ubl.state.eeprom_storage_slot=0;
+      if (WITHIN(phase_value, 0, 1) && ubl.state.eeprom_storage_slot == -1) {
+        ubl.state.eeprom_storage_slot = 0;
         SERIAL_PROTOCOLLNPGM("Default storage slot 0 selected.\n");
       }
 
diff --git a/buildroot/share/git/mfdoc b/buildroot/share/git/mfdoc
index 89bc5a9f17..3880c6dacb 100755
--- a/buildroot/share/git/mfdoc
+++ b/buildroot/share/git/mfdoc
@@ -37,7 +37,7 @@ opensite() {
 echo "Previewing MarlinDocumentation..."
 
 # wait to open the url for about 8s
-( sleep 8; opensite ) &
+( sleep 45; opensite ) &
 
 bundle exec jekyll serve --watch --incremental
 
diff --git a/buildroot/share/git/mfqp b/buildroot/share/git/mfqp
index 2420f48886..67a385c2ef 100755
--- a/buildroot/share/git/mfqp
+++ b/buildroot/share/git/mfqp
@@ -8,6 +8,10 @@
 MFINFO=$(mfinfo) || exit
 IFS=' ' read -a INFO <<< "$MFINFO"
 
+if [[ ${INFO[4]} == "(no" ]]; then
+  echo "Branch is unavailable!" ; exit 1
+fi
+
 case "$#" in
   0 ) ;;
   * ) echo "Usage: `basename $0`" 1>&2 ; exit 1 ;;
@@ -15,5 +19,14 @@ esac
 
 git add * .travis.yml
 git commit -m "patch"
-mfrb
-git push -f
+
+if [[ ${INFO[3]} == ${INFO[4]} ]]; then
+  if [[ ${INFO[2]} == "MarlinDocumentation" ]]; then
+    git rebase -i HEAD~2
+  else
+    echo "Don't alter the PR target branch."; exit 1
+  fi
+else
+  mfrb
+  git push -f
+fi