diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index b9443c86806..47200885dd4 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 08ab489e6d0..292babc4943 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/Marlin/src/gcode/config/M305.cpp b/Marlin/src/gcode/config/M305.cpp
new file mode 100644
index 00000000000..82863f5692f
--- /dev/null
+++ b/Marlin/src/gcode/config/M305.cpp
@@ -0,0 +1,81 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_USER_THERMISTORS
+
+#include "../gcode.h"
+#include "../../module/temperature.h"
+
+/**
+ * M305: Set (or report) custom thermistor parameters
+ *
+ *   P[index]  Thermistor table index
+ *   R[ohms]   Pullup resistor value
+ *   T[ohms]   Resistance at 25C
+ *   B[beta]   Thermistor "beta" value
+ *   C[coeff]  Steinhart-Hart Coefficient 'C'
+ *
+ *   Format: M305 P[tbl_index] R[pullup_resistor_val] T[therm_25C_resistance] B[therm_beta] C[Steinhart_Hart_C_coeff]
+ *
+ * Examples: M305 P0 R4700 T100000 B3950 C0.0
+ *           M305 P0 R4700
+ *           M305 P0 T100000
+ *           M305 P0 B3950
+ *           M305 P0 C0.0
+ */
+void GcodeSuite::M305() {
+  const int8_t t_index = parser.intval('P', -1);
+  const bool do_set = parser.seen("BCRT");
+
+  // A valid P index is required
+  if (t_index >= (USER_THERMISTORS) || (do_set && t_index < 0)) {
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("!Invalid index. (0 <= P <= ", int(USER_THERMISTORS - 1), ")");
+  }
+  else if (do_set) {
+    if (parser.seen('R')) // Pullup resistor value
+      if (!thermalManager.set_pull_up_res(t_index, parser.value_float()))
+        SERIAL_ECHO_MSG("!Invalid series resistance. (0 < R < 1000000)");
+
+    if (parser.seen('T')) // Resistance at 25C
+      if (!thermalManager.set_res25(t_index, parser.value_float()))
+        SERIAL_ECHO_MSG("!Invalid 25C resistance. (0 < T < 10000000)");
+
+    if (parser.seen('B')) // Beta value
+      if (!thermalManager.set_beta(t_index, parser.value_float()))
+        SERIAL_ECHO_MSG("!Invalid beta. (0 < B < 1000000)");
+
+    if (parser.seen('C')) // Steinhart-Hart C coefficient
+      if (!thermalManager.set_sh_coeff(t_index, parser.value_float()))
+        SERIAL_ECHO_MSG("!Invalid Steinhart-Hart C coeff. (-0.01 < C < +0.01)");
+  }                       // If not setting then report parameters
+  else if (t_index < 0) { // ...all user thermistors
+    for (uint8_t i = 0; i < USER_THERMISTORS; i++)
+      thermalManager.log_user_thermistor(i);
+  }
+  else                    // ...one user thermistor
+    thermalManager.log_user_thermistor(t_index);
+}
+
+#endif // HAS_USER_THERMISTORS
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index 45f00b7ddc2..44eadfa368b 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -589,6 +589,10 @@ void GcodeSuite::process_parsed_command(
         case 303: M303(); break;                                  // M303: PID autotune
       #endif
 
+      #if HAS_USER_THERMISTORS
+        case 305: M305(); break;                                  // M305: Set user thermistor parameters
+      #endif
+
       #if ENABLED(MORGAN_SCARA)
         case 360: if (M360()) return; break;                      // M360: SCARA Theta pos1
         case 361: if (M361()) return; break;                      // M361: SCARA Theta pos2
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index e6cd1f59f7d..95f9316a49a 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -184,6 +184,7 @@
  * M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. (Requires PREVENT_COLD_EXTRUSION)
  * M303 - PID relay autotune S<temperature> sets the target temperature. Default 150C. (Requires PIDTEMP)
  * M304 - Set bed PID parameters P I and D. (Requires PIDTEMPBED)
+ * M305 - Set user thermistor parameters R T and P. (Requires TEMP_SENSOR_x 1000)
  * M350 - Set microstepping mode. (Requires digital microstepping pins.)
  * M351 - Toggle MS1 MS2 pins directly. (Requires digital microstepping pins.)
  * M355 - Set Case Light on/off and set brightness. (Requires CASE_LIGHT_PIN)
@@ -686,6 +687,10 @@ private:
     static void M304();
   #endif
 
+  #if HAS_USER_THERMISTORS
+    static void M305();
+  #endif
+
   #if HAS_MICROSTEPS
     static void M350();
     static void M351();
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 63798a43226..75f21a5606c 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -286,6 +286,11 @@
 /**
  * Temp Sensor defines
  */
+
+#define ANY_TEMP_SENSOR_IS(n) (TEMP_SENSOR_0 == (n) || TEMP_SENSOR_1 == (n) || TEMP_SENSOR_2 == (n) || TEMP_SENSOR_3 == (n) || TEMP_SENSOR_4 == (n) || TEMP_SENSOR_5 == (n) || TEMP_SENSOR_BED == (n) || TEMP_SENSOR_CHAMBER == (n))
+
+#define HAS_USER_THERMISTORS ANY_TEMP_SENSOR_IS(1000)
+
 #if TEMP_SENSOR_0 == -4
   #define HEATER_0_USES_AD8495
 #elif TEMP_SENSOR_0 == -3
@@ -299,12 +304,14 @@
   #define HEATER_0_MAX6675_TMAX 1024
 #elif TEMP_SENSOR_0 == -1
   #define HEATER_0_USES_AD595
-#elif TEMP_SENSOR_0 == 0
+#elif TEMP_SENSOR_0 == 1000
+  #define HEATER_0_USER_THERMISTOR
+#elif TEMP_SENSOR_0 > 0
+  #define THERMISTOR_HEATER_0 TEMP_SENSOR_0
+  #define HEATER_0_USES_THERMISTOR
+#else
   #undef HEATER_0_MINTEMP
   #undef HEATER_0_MAXTEMP
-#elif TEMP_SENSOR_0 > 0
-  #define THERMISTORHEATER_0 TEMP_SENSOR_0
-  #define HEATER_0_USES_THERMISTOR
 #endif
 
 #if TEMP_SENSOR_1 == -4
@@ -325,12 +332,14 @@
   #define HEATER_1_MAX6675_TMAX 1024
 #elif TEMP_SENSOR_1 == -1
   #define HEATER_1_USES_AD595
-#elif TEMP_SENSOR_1 == 0
+#elif TEMP_SENSOR_1 == 1000
+  #define HEATER_1_USER_THERMISTOR
+#elif TEMP_SENSOR_1 > 0
+  #define THERMISTOR_HEATER_1 TEMP_SENSOR_1
+  #define HEATER_1_USES_THERMISTOR
+#else
   #undef HEATER_1_MINTEMP
   #undef HEATER_1_MAXTEMP
-#elif TEMP_SENSOR_1 > 0
-  #define THERMISTORHEATER_1 TEMP_SENSOR_1
-  #define HEATER_1_USES_THERMISTOR
 #endif
 
 #if TEMP_SENSOR_2 == -4
@@ -341,12 +350,14 @@
   #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_2."
 #elif TEMP_SENSOR_2 == -1
   #define HEATER_2_USES_AD595
-#elif TEMP_SENSOR_2 == 0
+#elif TEMP_SENSOR_2 == 1000
+  #define HEATER_2_USER_THERMISTOR
+#elif TEMP_SENSOR_2 > 0
+  #define THERMISTOR_HEATER_2 TEMP_SENSOR_2
+  #define HEATER_2_USES_THERMISTOR
+#else
   #undef HEATER_2_MINTEMP
   #undef HEATER_2_MAXTEMP
-#elif TEMP_SENSOR_2 > 0
-  #define THERMISTORHEATER_2 TEMP_SENSOR_2
-  #define HEATER_2_USES_THERMISTOR
 #endif
 
 #if TEMP_SENSOR_3 == -4
@@ -357,12 +368,14 @@
   #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_3."
 #elif TEMP_SENSOR_3 == -1
   #define HEATER_3_USES_AD595
-#elif TEMP_SENSOR_3 == 0
+#elif TEMP_SENSOR_3 == 1000
+  #define HEATER_3_USER_THERMISTOR
+#elif TEMP_SENSOR_3 > 0
+  #define THERMISTOR_HEATER_3 TEMP_SENSOR_3
+  #define HEATER_3_USES_THERMISTOR
+#else
   #undef HEATER_3_MINTEMP
   #undef HEATER_3_MAXTEMP
-#elif TEMP_SENSOR_3 > 0
-  #define THERMISTORHEATER_3 TEMP_SENSOR_3
-  #define HEATER_3_USES_THERMISTOR
 #endif
 
 #if TEMP_SENSOR_4 == -4
@@ -373,12 +386,14 @@
   #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_4."
 #elif TEMP_SENSOR_4 == -1
   #define HEATER_4_USES_AD595
-#elif TEMP_SENSOR_4 == 0
+#elif TEMP_SENSOR_4 == 1000
+  #define HEATER_4_USER_THERMISTOR
+#elif TEMP_SENSOR_4 > 0
+  #define THERMISTOR_HEATER_4 TEMP_SENSOR_4
+  #define HEATER_4_USES_THERMISTOR
+#else
   #undef HEATER_4_MINTEMP
   #undef HEATER_4_MAXTEMP
-#elif TEMP_SENSOR_4 > 0
-  #define THERMISTORHEATER_4 TEMP_SENSOR_4
-  #define HEATER_4_USES_THERMISTOR
 #endif
 
 #if TEMP_SENSOR_5 == -4
@@ -389,12 +404,14 @@
   #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_5."
 #elif TEMP_SENSOR_5 == -1
   #define HEATER_5_USES_AD595
-#elif TEMP_SENSOR_5 == 0
+#elif TEMP_SENSOR_5 == 1000
+  #define HEATER_5_USER_THERMISTOR
+#elif TEMP_SENSOR_5 > 0
+  #define THERMISTOR_HEATER_5 TEMP_SENSOR_5
+  #define HEATER_5_USES_THERMISTOR
+#else
   #undef HEATER_5_MINTEMP
   #undef HEATER_5_MAXTEMP
-#elif TEMP_SENSOR_5 > 0
-  #define THERMISTORHEATER_5 TEMP_SENSOR_5
-  #define HEATER_5_USES_THERMISTOR
 #endif
 
 #if TEMP_SENSOR_BED == -4
@@ -405,12 +422,14 @@
   #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BED."
 #elif TEMP_SENSOR_BED == -1
   #define HEATER_BED_USES_AD595
-#elif TEMP_SENSOR_BED == 0
-  #undef BED_MINTEMP
-  #undef BED_MAXTEMP
+#elif TEMP_SENSOR_BED == 1000
+  #define BED_USER_THERMISTOR
 #elif TEMP_SENSOR_BED > 0
   #define THERMISTORBED TEMP_SENSOR_BED
   #define HEATER_BED_USES_THERMISTOR
+#else
+  #undef BED_MINTEMP
+  #undef BED_MAXTEMP
 #endif
 
 #if TEMP_SENSOR_CHAMBER == -4
@@ -421,9 +440,14 @@
   #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_CHAMBER."
 #elif TEMP_SENSOR_CHAMBER == -1
   #define HEATER_CHAMBER_USES_AD595
+#elif TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_USER_THERMISTOR
 #elif TEMP_SENSOR_CHAMBER > 0
   #define THERMISTORCHAMBER TEMP_SENSOR_CHAMBER
   #define HEATER_CHAMBER_USES_THERMISTOR
+#else
+  #undef CHAMBER_MINTEMP
+  #undef CHAMBER_MAXTEMP
 #endif
 
 #define HOTEND_USES_THERMISTOR ANY(HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, HEATER_4_USES_THERMISTOR)
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 3f80764ac4b..61497457789 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -1339,6 +1339,27 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #error "You cannot set CASE_LIGHT_PIN equal to FAN_PIN."
 #endif
 
+/**
+ * Required custom thermistor settings
+ */
+#if   ENABLED(HEATER_0_USER_THERMISTOR) && !(defined(HOTEND0_PULLUP_RESISTOR_OHMS) && defined(HOTEND0_RESISTANCE_25C_OHMS) && defined(HOTEND0_BETA))
+  #error "TEMP_SENSOR_0 1000 requires HOTEND0_PULLUP_RESISTOR_OHMS, HOTEND0_RESISTANCE_25C_OHMS and HOTEND0_BETA in Configuration_adv.h."
+#elif ENABLED(HEATER_1_USER_THERMISTOR) && !(defined(HOTEND1_PULLUP_RESISTOR_OHMS) && defined(HOTEND1_RESISTANCE_25C_OHMS) && defined(HOTEND1_BETA))
+  #error "TEMP_SENSOR_1 1000 requires HOTEND1_PULLUP_RESISTOR_OHMS, HOTEND1_RESISTANCE_25C_OHMS and HOTEND1_BETA in Configuration_adv.h."
+#elif ENABLED(HEATER_2_USER_THERMISTOR) && !(defined(HOTEND2_PULLUP_RESISTOR_OHMS) && defined(HOTEND2_RESISTANCE_25C_OHMS) && defined(HOTEND2_BETA))
+  #error "TEMP_SENSOR_2 1000 requires HOTEND2_PULLUP_RESISTOR_OHMS, HOTEND2_RESISTANCE_25C_OHMS and HOTEND2_BETA in Configuration_adv.h."
+#elif ENABLED(HEATER_3_USER_THERMISTOR) && !(defined(HOTEND3_PULLUP_RESISTOR_OHMS) && defined(HOTEND3_RESISTANCE_25C_OHMS) && defined(HOTEND3_BETA))
+  #error "TEMP_SENSOR_3 1000 requires HOTEND3_PULLUP_RESISTOR_OHMS, HOTEND3_RESISTANCE_25C_OHMS and HOTEND3_BETA in Configuration_adv.h."
+#elif ENABLED(HEATER_4_USER_THERMISTOR) && !(defined(HOTEND4_PULLUP_RESISTOR_OHMS) && defined(HOTEND4_RESISTANCE_25C_OHMS) && defined(HOTEND4_BETA))
+  #error "TEMP_SENSOR_4 1000 requires HOTEND4_PULLUP_RESISTOR_OHMS, HOTEND4_RESISTANCE_25C_OHMS and HOTEND4_BETA in Configuration_adv.h."
+#elif ENABLED(HEATER_5_USER_THERMISTOR) && !(defined(HOTEND5_PULLUP_RESISTOR_OHMS) && defined(HOTEND5_RESISTANCE_25C_OHMS) && defined(HOTEND5_BETA))
+  #error "TEMP_SENSOR_5 1000 requires HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS and HOTEND5_BETA in Configuration_adv.h."
+#elif ENABLED(BED_USER_THERMISTOR) && !(defined(BED_PULLUP_RESISTOR_OHMS) && defined(BED_RESISTANCE_25C_OHMS) && defined(BED_BETA))
+  #error "TEMP_SENSOR_BED 1000 requires BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS and BED_BETA in Configuration_adv.h."
+#elif ENABLED(CHAMBER_USER_THERMISTOR) && !(defined(CHAMBER_PULLUP_RESISTOR_OHMS) && defined(CHAMBER_RESISTANCE_25C_OHMS) && defined(CHAMBER_BETA))
+  #error "TEMP_SENSOR_CHAMBER 1000 requires CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS and CHAMBER_BETA in Configuration_adv.h."
+#endif
+
 /**
  * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set.
  */
diff --git a/Marlin/src/lcd/thermistornames.h b/Marlin/src/lcd/thermistornames.h
index 512c3623bed..d143de57193 100644
--- a/Marlin/src/lcd/thermistornames.h
+++ b/Marlin/src/lcd/thermistornames.h
@@ -31,8 +31,12 @@
 
 #undef THERMISTOR_NAME
 
+// User-specified thermistor parameters
+#if THERMISTOR_ID == 1000
+  #define THERMISTOR_NAME "User Parameters"
+
 // Thermcouples
-#if THERMISTOR_ID == -4
+#elif THERMISTOR_ID == -4
   #define THERMISTOR_NAME "AD8495"
 #elif THERMISTOR_ID == -3
   #define THERMISTOR_NAME "MAX31855"
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index 63d95e6b591..11fbbd289bb 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -243,6 +243,13 @@ typedef struct SettingsDataStruct {
   //
   PID_t bedPID;                                         // M304 PID / M303 E-1 U
 
+  //
+  // User-defined Thermistors
+  //
+  #if HAS_USER_THERMISTORS
+    user_thermistor_t user_thermistor[USER_THERMISTORS]; // M305 P0 R4700 T100000 B3950
+  #endif
+
   //
   // HAS_LCD_CONTRAST
   //
@@ -800,6 +807,16 @@ void MarlinSettings::postprocess() {
       #endif
     }
 
+    //
+    // User-defined Thermistors
+    //
+    #if HAS_USER_THERMISTORS
+    {
+      _FIELD_TEST(user_thermistor);
+      EEPROM_WRITE(thermalManager.user_thermistor);
+    }
+    #endif
+
     //
     // LCD Contrast
     //
@@ -1579,6 +1596,16 @@ void MarlinSettings::postprocess() {
         #endif
       }
 
+      //
+      // User-defined Thermistors
+      //
+      #if HAS_USER_THERMISTORS
+      {
+        _FIELD_TEST(user_thermistor);
+        EEPROM_READ(thermalManager.user_thermistor);
+      }
+      #endif
+
       //
       // LCD Contrast
       //
@@ -2386,6 +2413,14 @@ void MarlinSettings::reset() {
     thermalManager.temp_bed.pid.Kd = scalePID_d(DEFAULT_bedKd);
   #endif
 
+  //
+  // User-Defined Thermistors
+  //
+
+  #if HAS_USER_THERMISTORS
+    thermalManager.reset_user_thermistors();
+  #endif
+
   //
   // LCD Contrast
   //
@@ -2951,6 +2986,12 @@ void MarlinSettings::reset() {
 
     #endif // PIDTEMP || PIDTEMPBED
 
+    #if HAS_USER_THERMISTORS
+      CONFIG_ECHO_HEADING("User thermistors:");
+      for (uint8_t i = 0; i < USER_THERMISTORS; i++)
+        thermalManager.log_user_thermistor(i, true);
+    #endif
+
     #if HAS_LCD_CONTRAST
       CONFIG_ECHO_HEADING("LCD Contrast:");
       CONFIG_ECHO_START();
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index 16d551a9a2d..b349a3dea39 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -1183,6 +1183,136 @@ void Temperature::manage_heater() {
   }                                                                    \
 }while(0)
 
+#if HAS_USER_THERMISTORS
+
+  user_thermistor_t Temperature::user_thermistor[USER_THERMISTORS]; // Initialized by settings.load()
+
+  void Temperature::reset_user_thermistors() {
+    user_thermistor_t user_thermistor[USER_THERMISTORS] = {
+      #if ENABLED(HEATER_0_USER_THERMISTOR)
+        { true, 0, 0, HOTEND0_PULLUP_RESISTOR_OHMS, HOTEND0_RESISTANCE_25C_OHMS, 0, 0, HOTEND0_BETA, 0 },
+      #endif
+      #if ENABLED(HEATER_1_USER_THERMISTOR)
+        { true, 0, 0, HOTEND1_PULLUP_RESISTOR_OHMS, HOTEND1_RESISTANCE_25C_OHMS, 0, 0, HOTEND1_BETA, 0 },
+      #endif
+      #if ENABLED(HEATER_2_USER_THERMISTOR)
+        { true, 0, 0, HOTEND2_PULLUP_RESISTOR_OHMS, HOTEND2_RESISTANCE_25C_OHMS, 0, 0, HOTEND2_BETA, 0 },
+      #endif
+      #if ENABLED(HEATER_3_USER_THERMISTOR)
+        { true, 0, 0, HOTEND3_PULLUP_RESISTOR_OHMS, HOTEND3_RESISTANCE_25C_OHMS, 0, 0, HOTEND3_BETA, 0 },
+      #endif
+      #if ENABLED(HEATER_4_USER_THERMISTOR)
+        { true, 0, 0, HOTEND4_PULLUP_RESISTOR_OHMS, HOTEND4_RESISTANCE_25C_OHMS, 0, 0, HOTEND4_BETA, 0 },
+      #endif
+      #if ENABLED(HEATER_5_USER_THERMISTOR)
+        { true, 0, 0, HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS, 0, 0, HOTEND5_BETA, 0 },
+      #endif
+      #if ENABLED(BED_USER_THERMISTOR)
+        { true, 0, 0, BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS, 0, 0, BED_BETA, 0 },
+      #endif
+      #if ENABLED(CHAMBER_USER_THERMISTOR)
+        { true, 0, 0, CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS, 0, 0, CHAMBER_BETA, 0 }
+      #endif
+    };
+    COPY(thermalManager.user_thermistor, user_thermistor);
+  }
+
+  void Temperature::log_user_thermistor(const uint8_t t_index, const bool eprom/*=false*/) {
+
+    if (eprom)
+      SERIAL_ECHOPGM("  M305 ");
+    else
+      SERIAL_ECHO_START();
+    SERIAL_CHAR('P');
+    SERIAL_CHAR('0' + t_index);
+
+    const user_thermistor_t &t = user_thermistor[t_index];
+
+    SERIAL_ECHOPAIR_F(" R", t.series_res, 1);
+    SERIAL_ECHOPAIR_F(" T", t.res_25, 1);
+    SERIAL_ECHOPAIR_F(" B", t.beta, 1);
+    SERIAL_ECHOPAIR_F(" C", t.sh_c_coeff, 9);
+    SERIAL_ECHOPGM(" ; ");
+    serialprintPGM(
+      #if ENABLED(HEATER_0_USER_THERMISTOR)
+        t_index == CTI_HOTEND_0 ? PSTR("HOTEND 0") :
+      #endif
+      #if ENABLED(HEATER_1_USER_THERMISTOR)
+        t_index == CTI_HOTEND_1 ? PSTR("HOTEND 1") :
+      #endif
+      #if ENABLED(HEATER_2_USER_THERMISTOR)
+        t_index == CTI_HOTEND_2 ? PSTR("HOTEND 2") :
+      #endif
+      #if ENABLED(HEATER_3_USER_THERMISTOR)
+        t_index == CTI_HOTEND_3 ? PSTR("HOTEND 3") :
+      #endif
+      #if ENABLED(HEATER_4_USER_THERMISTOR)
+        t_index == CTI_HOTEND_4 ? PSTR("HOTEND 4") :
+      #endif
+      #if ENABLED(HEATER_5_USER_THERMISTOR)
+        t_index == CTI_HOTEND_5 ? PSTR("HOTEND 5") :
+      #endif
+      #if ENABLED(BED_USER_THERMISTOR)
+        t_index == CTI_BED ? PSTR("BED") :
+      #endif
+      #if ENABLED(CHAMBER_USER_THERMISTOR)
+        t_index == CTI_CHAMBER ? PSTR("CHAMBER") :
+      #endif
+      NULL
+    );
+    SERIAL_EOL();
+  }
+
+  float Temperature::user_thermistor_to_deg_c(const uint8_t t_index, const int raw) {
+    //#if (MOTHERBOARD == BOARD_RAMPS_14_EFB)
+    //  static uint32_t clocks_total = 0;
+    //  static uint32_t calls = 0;
+    //  uint32_t tcnt5 = TCNT5;
+    //#endif
+
+    if (!WITHIN(t_index, 0, COUNT(user_thermistor) - 1)) return 25;
+
+    if (user_thermistor[t_index].pre_calc) {
+      // pre-calculate some variables
+      user_thermistor[t_index].pre_calc = false;
+      user_thermistor[t_index].res_25_recip = 1.0f / user_thermistor[t_index].res_25;
+      user_thermistor[t_index].res_25_log = logf(user_thermistor[t_index].res_25);
+      user_thermistor[t_index].beta_recip = 1.0f / user_thermistor[t_index].beta;
+      user_thermistor[t_index].sh_alpha = (1.0f / (THERMISTOR_RESISTANCE_NOMINAL_C - THERMISTOR_ABS_ZERO_C)) - (user_thermistor[t_index].beta_recip * user_thermistor[t_index].res_25_log) - (user_thermistor[t_index].sh_c_coeff * user_thermistor[t_index].res_25_log * user_thermistor[t_index].res_25_log * user_thermistor[t_index].res_25_log);
+    }
+
+    // maximum adc value .. take into account the over sampling
+    const int adc_max = (THERMISTOR_ADC_RESOLUTION * OVERSAMPLENR) - 1,
+              adc_raw = constrain(raw, 1, adc_max - 1); // constrain to prevent divide-by-zero
+
+    const float adc_inverse = (adc_max - adc_raw) - 0.5f,
+                resistance = user_thermistor[t_index].series_res * (adc_raw + 0.5f) / adc_inverse,
+                log_resistance = logf(resistance);
+
+    float value = user_thermistor[t_index].sh_alpha;
+    value += log_resistance * user_thermistor[t_index].beta_recip;
+    if (user_thermistor[t_index].sh_c_coeff != 0)
+      value += user_thermistor[t_index].sh_c_coeff * log_resistance * log_resistance * log_resistance;
+    value = 1.0f / value;
+
+    // Convert to degrees C
+    float deg_c = value + THERMISTOR_ABS_ZERO_C;
+
+    // Test only
+    //deg_c = constrain(deg_c, 6, 100);
+
+    //#if (MOTHERBOARD == BOARD_RAMPS_14_EFB)
+    //  int32_t clocks = TCNT5 - tcnt5;
+    //  if (clocks >= 0) {
+    //    clocks_total += clocks;
+    //    calls++;
+    //  }
+    //#endif
+
+    return deg_c;
+  }
+#endif
+
 // Derived from RepRap FiveD extruder::getTemperature()
 // For hot end temperature measurement.
 float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
@@ -1201,7 +1331,9 @@ float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
 
   switch (e) {
     case 0:
-      #if ENABLED(HEATER_0_USES_MAX6675)
+      #if ENABLED(HEATER_0_USER_THERMISTOR)
+        return user_thermistor_to_deg_c(CTI_HOTEND_0, raw);
+      #elif ENABLED(HEATER_0_USES_MAX6675)
         return raw * 0.25;
       #elif ENABLED(HEATER_0_USES_AD595)
         return TEMP_AD595(raw);
@@ -1211,7 +1343,9 @@ float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
         break;
       #endif
     case 1:
-      #if ENABLED(HEATER_1_USES_MAX6675)
+      #if ENABLED(HEATER_1_USER_THERMISTOR)
+        return user_thermistor_to_deg_c(CTI_HOTEND_1, raw);
+      #elif ENABLED(HEATER_1_USES_MAX6675)
         return raw * 0.25;
       #elif ENABLED(HEATER_1_USES_AD595)
         return TEMP_AD595(raw);
@@ -1221,7 +1355,9 @@ float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
         break;
       #endif
     case 2:
-      #if ENABLED(HEATER_2_USES_AD595)
+      #if ENABLED(HEATER_2_USER_THERMISTOR)
+        return user_thermistor_to_deg_c(CTI_HOTEND_2, raw);
+      #elif ENABLED(HEATER_2_USES_AD595)
         return TEMP_AD595(raw);
       #elif ENABLED(HEATER_2_USES_AD8495)
         return TEMP_AD8495(raw);
@@ -1229,7 +1365,9 @@ float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
         break;
       #endif
     case 3:
-      #if ENABLED(HEATER_3_USES_AD595)
+      #if ENABLED(HEATER_3_USER_THERMISTOR)
+        return user_thermistor_to_deg_c(CTI_HOTEND_3, raw);
+      #elif ENABLED(HEATER_3_USES_AD595)
         return TEMP_AD595(raw);
       #elif ENABLED(HEATER_3_USES_AD8495)
         return TEMP_AD8495(raw);
@@ -1237,7 +1375,9 @@ float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
         break;
       #endif
     case 4:
-      #if ENABLED(HEATER_4_USES_AD595)
+      #if ENABLED(HEATER_4_USER_THERMISTOR)
+        return user_thermistor_to_deg_c(CTI_HOTEND_4, raw);
+      #elif ENABLED(HEATER_4_USES_AD595)
         return TEMP_AD595(raw);
       #elif ENABLED(HEATER_4_USES_AD8495)
         return TEMP_AD8495(raw);
@@ -1245,7 +1385,9 @@ float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
         break;
       #endif
     case 5:
-      #if ENABLED(HEATER_5_USES_AD595)
+      #if ENABLED(HEATER_5_USER_THERMISTOR)
+        return user_thermistor_to_deg_c(CTI_HOTEND_5, raw);
+      #elif ENABLED(HEATER_5_USES_AD595)
         return TEMP_AD595(raw);
       #elif ENABLED(HEATER_5_USES_AD8495)
         return TEMP_AD8495(raw);
@@ -1268,7 +1410,9 @@ float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
   // Derived from RepRap FiveD extruder::getTemperature()
   // For bed temperature measurement.
   float Temperature::analog_to_celsius_bed(const int raw) {
-    #if ENABLED(HEATER_BED_USES_THERMISTOR)
+    #if ENABLED(BED_USER_THERMISTOR)
+      return user_thermistor_to_deg_c(CTI_BED, raw);
+    #elif ENABLED(HEATER_BED_USES_THERMISTOR)
       SCAN_THERMISTOR_TABLE(BEDTEMPTABLE, BEDTEMPTABLE_LEN);
     #elif ENABLED(HEATER_BED_USES_AD595)
       return TEMP_AD595(raw);
@@ -1284,7 +1428,9 @@ float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
   // Derived from RepRap FiveD extruder::getTemperature()
   // For chamber temperature measurement.
   float Temperature::analog_to_celsius_chamber(const int raw) {
-    #if ENABLED(HEATER_CHAMBER_USES_THERMISTOR)
+    #if ENABLED(CHAMBER_USER_THERMISTOR)
+      return user_thermistor_to_deg_c(CTI_CHAMBER, raw);
+    #elif ENABLED(HEATER_CHAMBER_USES_THERMISTOR)
       SCAN_THERMISTOR_TABLE(CHAMBERTEMPTABLE, CHAMBERTEMPTABLE_LEN);
     #elif ENABLED(HEATER_CHAMBER_USES_AD595)
       return TEMP_AD595(raw);
diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h
index 9a56a9ef235..117286131d8 100644
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@@ -26,6 +26,7 @@
  */
 
 #include "thermistor/thermistors.h"
+
 #include "../inc/MarlinConfig.h"
 
 #if ENABLED(AUTO_POWER_CONTROL)
@@ -207,6 +208,53 @@ typedef struct { int16_t raw_min, raw_max; } raw_range_t;
 typedef struct { int16_t mintemp, maxtemp; } celsius_range_t;
 typedef struct { int16_t raw_min, raw_max, mintemp, maxtemp; } temp_range_t;
 
+#define THERMISTOR_ADC_RESOLUTION       1024           // 10-bit ADC .. shame to waste 12-bits of resolution on 32-bit
+#define THERMISTOR_ABS_ZERO_C           -273.15f       // bbbbrrrrr cold !
+#define THERMISTOR_RESISTANCE_NOMINAL_C 25.0f          // mmmmm comfortable
+
+#if HAS_USER_THERMISTORS
+
+  enum CustomThermistorIndex : uint8_t {
+    #if ENABLED(HEATER_0_USER_THERMISTOR)
+      CTI_HOTEND_0,
+    #endif
+    #if ENABLED(HEATER_1_USER_THERMISTOR)
+      CTI_HOTEND_1,
+    #endif
+    #if ENABLED(HEATER_2_USER_THERMISTOR)
+      CTI_HOTEND_2,
+    #endif
+    #if ENABLED(HEATER_3_USER_THERMISTOR)
+      CTI_HOTEND_3,
+    #endif
+    #if ENABLED(HEATER_4_USER_THERMISTOR)
+      CTI_HOTEND_4,
+    #endif
+    #if ENABLED(HEATER_5_USER_THERMISTOR)
+      CTI_HOTEND_5,
+    #endif
+    #if ENABLED(BED_USER_THERMISTOR)
+      CTI_BED,
+    #endif
+    #if ENABLED(CHAMBER_USER_THERMISTOR)
+      CTI_CHAMBER,
+    #endif
+    USER_THERMISTORS
+  };
+
+  // User-defined thermistor
+  typedef struct {
+    bool pre_calc;     // true if pre-calculations update needed
+    float sh_c_coeff,  // Steinhart-Hart C coefficient .. defaults to '0.0'
+          sh_alpha,
+          series_res,
+          res_25, res_25_recip,
+          res_25_log,
+          beta, beta_recip;
+  } user_thermistor_t;
+
+#endif
+
 class Temperature {
 
   public:
@@ -363,6 +411,38 @@ class Temperature {
     /**
      * Static (class) methods
      */
+
+    #if HAS_USER_THERMISTORS
+      static user_thermistor_t user_thermistor[USER_THERMISTORS];
+      static void log_user_thermistor(const uint8_t t_index, const bool eprom=false);
+      static void reset_user_thermistors();
+      static float user_thermistor_to_deg_c(const uint8_t t_index, const int raw);
+      static bool set_pull_up_res(int8_t t_index, float value) {
+        //if (!WITHIN(t_index, 0, USER_THERMISTORS - 1)) return false;
+        if (!WITHIN(value, 1, 1000000)) return false;
+        user_thermistor[t_index].series_res = value;
+        return true;
+      }
+      static bool set_res25(int8_t t_index, float value) {
+        if (!WITHIN(value, 1, 10000000)) return false;
+        user_thermistor[t_index].res_25 = value;
+        user_thermistor[t_index].pre_calc = true;
+        return true;
+      }
+      static bool set_beta(int8_t t_index, float value) {
+        if (!WITHIN(value, 1, 1000000)) return false;
+        user_thermistor[t_index].beta = value;
+        user_thermistor[t_index].pre_calc = true;
+        return true;
+      }
+      static bool set_sh_coeff(int8_t t_index, float value) {
+        if (!WITHIN(value, -0.01f, 0.01f)) return false;
+        user_thermistor[t_index].sh_c_coeff = value;
+        user_thermistor[t_index].pre_calc = true;
+        return true;
+      }
+    #endif
+
     static float analog_to_celsius_hotend(const int raw, const uint8_t e);
 
     #if HAS_HEATED_BED
diff --git a/Marlin/src/module/thermistor/thermistor_20.h b/Marlin/src/module/thermistor/thermistor_20.h
index 46d89b84d29..fa1a7568124 100644
--- a/Marlin/src/module/thermistor/thermistor_20.h
+++ b/Marlin/src/module/thermistor/thermistor_20.h
@@ -23,27 +23,27 @@
 // PT100 with INA826 amp on Ultimaker v2.0 electronics
 // The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
 // This does not match the normal thermistor behaviour so we need to set the following defines
-#if THERMISTORHEATER_0 == 20
+#if THERMISTOR_HEATER_0 == 20
   #define HEATER_0_RAW_HI_TEMP 16383
   #define HEATER_0_RAW_LO_TEMP 0
 #endif
-#if THERMISTORHEATER_1 == 20
+#if THERMISTOR_HEATER_1 == 20
   #define HEATER_1_RAW_HI_TEMP 16383
   #define HEATER_1_RAW_LO_TEMP 0
 #endif
-#if THERMISTORHEATER_2 == 20
+#if THERMISTOR_HEATER_2 == 20
   #define HEATER_2_RAW_HI_TEMP 16383
   #define HEATER_2_RAW_LO_TEMP 0
 #endif
-#if THERMISTORHEATER_3 == 20
+#if THERMISTOR_HEATER_3 == 20
   #define HEATER_3_RAW_HI_TEMP 16383
   #define HEATER_3_RAW_LO_TEMP 0
 #endif
-#if THERMISTORHEATER_4 == 20
+#if THERMISTOR_HEATER_4 == 20
   #define HEATER_4_RAW_HI_TEMP 16383
   #define HEATER_4_RAW_LO_TEMP 0
 #endif
-#if THERMISTORHEATER_5 == 20
+#if THERMISTOR_HEATER_5 == 20
   #define HEATER_5_RAW_HI_TEMP 16383
   #define HEATER_5_RAW_LO_TEMP 0
 #endif
diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h
index ab82f2603db..5066f752df4 100644
--- a/Marlin/src/module/thermistor/thermistors.h
+++ b/Marlin/src/module/thermistor/thermistors.h
@@ -26,7 +26,7 @@
 #define OVERSAMPLENR 16
 #define OV(N) int16_t((N) * (OVERSAMPLENR))
 
-#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORHEATER_4 == n || THERMISTORHEATER_5 == n || THERMISTORBED == n || THERMISTORCHAMBER == n)
+#define ANY_THERMISTOR_IS(n) (THERMISTOR_HEATER_0 == n || THERMISTOR_HEATER_1 == n || THERMISTOR_HEATER_2 == n || THERMISTOR_HEATER_3 == n || THERMISTOR_HEATER_4 == n || THERMISTOR_HEATER_5 == n || THERMISTORBED == n || THERMISTORCHAMBER == n)
 
 // Pt1000 and Pt100 handling
 //
@@ -141,8 +141,8 @@
 #define _TT_NAME(_N) temptable_ ## _N
 #define TT_NAME(_N) _TT_NAME(_N)
 
-#if THERMISTORHEATER_0
-  #define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)
+#if THERMISTOR_HEATER_0
+  #define HEATER_0_TEMPTABLE TT_NAME(THERMISTOR_HEATER_0)
   #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
 #elif defined(HEATER_0_USES_THERMISTOR)
   #error "No heater 0 thermistor table specified"
@@ -151,8 +151,8 @@
   #define HEATER_0_TEMPTABLE_LEN 0
 #endif
 
-#if THERMISTORHEATER_1
-  #define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)
+#if THERMISTOR_HEATER_1
+  #define HEATER_1_TEMPTABLE TT_NAME(THERMISTOR_HEATER_1)
   #define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
 #elif defined(HEATER_1_USES_THERMISTOR)
   #error "No heater 1 thermistor table specified"
@@ -161,8 +161,8 @@
   #define HEATER_1_TEMPTABLE_LEN 0
 #endif
 
-#if THERMISTORHEATER_2
-  #define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)
+#if THERMISTOR_HEATER_2
+  #define HEATER_2_TEMPTABLE TT_NAME(THERMISTOR_HEATER_2)
   #define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
 #elif defined(HEATER_2_USES_THERMISTOR)
   #error "No heater 2 thermistor table specified"
@@ -171,8 +171,8 @@
   #define HEATER_2_TEMPTABLE_LEN 0
 #endif
 
-#if THERMISTORHEATER_3
-  #define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
+#if THERMISTOR_HEATER_3
+  #define HEATER_3_TEMPTABLE TT_NAME(THERMISTOR_HEATER_3)
   #define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
 #elif defined(HEATER_3_USES_THERMISTOR)
   #error "No heater 3 thermistor table specified"
@@ -181,8 +181,8 @@
   #define HEATER_3_TEMPTABLE_LEN 0
 #endif
 
-#if THERMISTORHEATER_4
-  #define HEATER_4_TEMPTABLE TT_NAME(THERMISTORHEATER_4)
+#if THERMISTOR_HEATER_4
+  #define HEATER_4_TEMPTABLE TT_NAME(THERMISTOR_HEATER_4)
   #define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE)
 #elif defined(HEATER_4_USES_THERMISTOR)
   #error "No heater 4 thermistor table specified"
@@ -191,8 +191,8 @@
   #define HEATER_4_TEMPTABLE_LEN 0
 #endif
 
-#if THERMISTORHEATER_5
-  #define HEATER_5_TEMPTABLE TT_NAME(THERMISTORHEATER_5)
+#if THERMISTOR_HEATER_5
+  #define HEATER_5_TEMPTABLE TT_NAME(THERMISTOR_HEATER_5)
   #define HEATER_5_TEMPTABLE_LEN COUNT(HEATER_5_TEMPTABLE)
 #elif defined(HEATER_5_USES_THERMISTOR)
   #error "No heater 5 thermistor table specified"
diff --git a/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h b/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
index c26b0d08167..1d3115cbf6f 100644
--- a/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
+++ b/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
@@ -28,6 +28,9 @@
   #define BOARD_NAME "BIGTREE SKR V1.3"
 #endif
 
+// Ignore temp readings during develpment.
+//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
+
 //
 // Servos
 //
diff --git a/buildroot/share/tests/megaatmega2560-tests b/buildroot/share/tests/megaatmega2560-tests
index 0ca2c419b77..d76ef3f5e93 100755
--- a/buildroot/share/tests/megaatmega2560-tests
+++ b/buildroot/share/tests/megaatmega2560-tests
@@ -55,7 +55,7 @@ opt_set EXTRUDERS 5
 opt_set TEMP_SENSOR_1 1
 opt_set TEMP_SENSOR_2 5
 opt_set TEMP_SENSOR_3 20
-opt_set TEMP_SENSOR_4 999
+opt_set TEMP_SENSOR_4 1000
 opt_set TEMP_SENSOR_BED 1
 opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
            EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index b9443c86806..47200885dd4 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 415b8329de4..8c5fd379401 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index 524cb39f5c9..8ea5835e4ba 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 349de55cbde..6bbc8867c86 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index ad3a588251e..13dff5892a2 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 7
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index ce81c2b00cf..8a22f62952a 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index e427361b673..9f372507e10 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index 15a50f76ede..1a262ca3b1b 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 20
 #define TEMP_SENSOR_1 20
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 413ec9ee030..ee90cb371be 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index a6cb7fa9e29..d526d0c9efd 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 22a2c2d5894..51206b9446e 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index b2673655ad0..fdf1ccc8b37 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 22a2c2d5894..51206b9446e 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 73327ea0386..223ce3ee2e5 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 11
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 9eed6e4e180..423156a53bd 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index 02774605065..472ddc0ce87 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -379,11 +379,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 536fb688303..824af0ef5d7 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index ae4cafa7d41..26261f04288 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 78726ac02f0..ddf2e3c879e 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 590d204a574..a0ae0490489 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 6189acb1024..043de462f29 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 #define HEATER_BED_INVERTING true
 #define HEATER_0_INVERTING true
 #define HEATER_1_INVERTING true
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 5dbad2994bd..22990b0dbba 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 1
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index ecbdaddfde3..1845c6ad928 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index 0620275dbef..1d96e4b331c 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index a716c728faa..2bcd79d8c30 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 5
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 764a5cad735..1d1d25d9042 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index 098d1140a42..54ed8b91575 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 3992a0fe0e6..ba0f47b62c1 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index 601970a3ec2..3fb9b6b3d55 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -386,11 +386,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 70
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index e1a55fc78d4..20abea72084 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 3a920797c8f..0e21213d337 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 3992a0fe0e6..ba0f47b62c1 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index a8987efaeb9..f2efeb808d5 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -379,11 +379,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 -1
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 72af513f2ac..3597870dafe 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index aac63ced233..279844cff86 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index f6626bb6db1..b1da67d5121 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index 0e133bbee7a..1d6dfbf7b46 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 80766649a03..bdb24bd1789 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index a5a5ee19a98..ef6d42a0a49 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index 31957e14657..e00592e7845 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index f05e2cdb164..92bed704e34 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -387,11 +387,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index ba949ea2953..9a9432c4d7e 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index f6ff0072a0d..d2ae3060a83 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 152a4032815..3f353819ef1 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index d48ed643aba..7c700df55b3 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index e431e00f18f..cfd5c07defb 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index e707b28e172..cac28fc4540 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index 686458dd5d3..58dab4c0add 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 1da04bc4d2e..737d2939194 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index d8f7fc4980f..306cf4e05f4 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 19126183af3..3d9c5a1fa83 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index 1e7f99a2074..62455e1e061 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index d1eed4cb733..768c72b863e 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index 435bca01410..8230421338e 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 1
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index 64784000fa4..520f1cfacda 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 -2
 #define TEMP_SENSOR_1 -2
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 48f012a4dad..aa236f4ceb7 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index 56a62ad5ef4..223287f6641 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index cba8ba4427f..f7ee66b83bf 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index a57fd8a79d5..6b5fca232e0 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -419,11 +419,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index bc0874d471f..f97162a7bde 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 986c828d0d0..9fc46c308cd 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -387,11 +387,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 1
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 3a5b3f807d7..4789b373818 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index 3aa3bc94752..fc2177eacc3 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -382,11 +382,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 1
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 8b21fa2e448..f6ce573abde 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index 89d9a6ade96..bcc44ea7d88 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 982138d64f4..8fb7f1e0cb3 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index 88ccfb23c2e..407a5beafdc 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 0935ba702da..96c43dfe708 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 55435a9c5cd..ec12e71bd90 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 000f5597adb..ad2418637f7 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 3103ed22dd2..aea5ef3a8e8 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 107025322da..3b07bdc121c 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index ec8746c0586..c7bd586ceca 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -377,11 +377,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 0f4faf70d54..b2f4bf0e85e 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 08b4bde7a3a..096bbfc83f6 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 1
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 881d125b3ac..8367fa205e9 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 100c7d7ef48..51be8d6b328 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 881d125b3ac..8367fa205e9 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index b5634860ffb..b9de6666280 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 70c0925f463..8f85a03c4a3 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 2540a8e380e..db184bc5e4c 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -383,11 +383,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 15 // manual calibration of thermistor in JGAurora A5 hotend
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index 498320c63f8..633e682e6a2 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index f37d018241c..aba80687311 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -398,11 +398,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 40468711811..d544a974254 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index 0b004e188a1..e8dcd837dc5 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -383,11 +383,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index ce9cb9a6cf9..c830a23dc5c 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index 5dc755a8cf0..b375dbe2b7d 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 11
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 9bf6d660005..d269362102f 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index ed0f1371b2d..fd95b09e0de 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index 7bf6c124f10..9f35df3ce57 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index e9e8bab0ff7..1984182d221 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index d791ec8313e..5ea4d8e3911 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -379,11 +379,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 1
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 8131ea2f5fc..2f6bbbd6200 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index 486c2779b4d..89e01362dfb 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index d63a42f63bb..b2bcd2e2a08 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index a2fd1011a98..dd0ce6485c7 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -379,11 +379,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index c60dbd8363c..b88c756d39b 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 6e0cb188dec..c3b76873653 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index a639e1f6d03..92ebd8dc435 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index bbd968246be..f017b474011 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index bb98e6086c9..845fbdd1d36 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -381,11 +381,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index b0012607e4f..85dc177a90a 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index 9fac65aaf0b..ad43f2b2974 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -409,11 +409,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index 057ce638a71..861417c3204 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index edb1bb3e5fd..12e447faa46 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 1
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 2e2de2c0922..60a64d6b987 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h
index 63982ce2629..397fe53f32d 100644
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #warning temp_sensor set to 998/999 (fake)
 #define TEMP_SENSOR_0 999
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index b066ddb307e..86d90c324c6 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 4fa289ae224..921dd55c3a5 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #warning temp_sensor set to 998/999 (fake)
 #define TEMP_SENSOR_0 999
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index bc12e810c51..880ce71f842 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index 1e0f7591cd2..59d652e519a 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index 01a4141c19f..127c81c08b6 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 9d633b5f222..bc663a57680 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index 8fb82787080..436de102dea 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -400,11 +400,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 35edd640f74..37df415b1d3 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index c94792424fc..bde3e88e715 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 11
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index 492a058f3f5..2a7163b2738 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 6
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 1e4e6d0023b..40590226fcd 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index ef554587672..dd09101991f 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -380,11 +380,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index a1f3e6260ab..bfb1b2326e3 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 053566f5c3d..5be4e26af23 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index 74aa8596c89..30d010da043 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 9317bea654e..3d903d10ae2 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 57186a348fe..e3c835da89b 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index 2ce236a081d..1b2ac02f9f7 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index ef8be66e6bc..5488eeb6021 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 82fed83f6cd..3a23eb205ee 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 5
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 5c46316ddb0..da6796ba75e 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index caddd80f4de..7538d846fcb 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -398,11 +398,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index c934e029680..617135c2557 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -48,6 +48,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index e4a41960823..123319beb0d 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 3ee5fd01e59..10ab7548e8c 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index b381b7222a4..1644bfee0c5 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 5
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 77257fa26d0..ea4751fa1af 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -397,11 +397,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index f5563561a0b..b5f41492142 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index 279f048f3bf..25bcf2ba885 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 20
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 7b60ca9972c..804836a53cb 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index b46b0a2acf7..3b975924c76 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index 073299b5f6d..a8bdeff5b1b 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -393,11 +393,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index f6e79aa207d..1d307572d2a 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 74229f83232..c45e4b9ff7a 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 64ae4c49b8b..d869c311388 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index f575c00c53b..76fd8d37b33 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 64ae4c49b8b..d869c311388 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 3227e476aab..fc6b07361fb 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 32a1463f8f5..48d82cc8761 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index ac7a726821c..df6b15bfc85 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 32a1463f8f5..48d82cc8761 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 0661c97426d..dc478fce034 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -383,11 +383,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index 2ec7f71c985..eba89740c76 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 067a944ef68..6677f2704f7 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index 5defdfee9b3..03f92e512b7 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h	
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 54c34a8399c..fe52404a8ac 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 09485fef690..19a04739fc8 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 32a1463f8f5..48d82cc8761 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index bc4299de62e..bba408c600c 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 7
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index ba309b73f75..507a6a143e3 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index 7970656ad01..1cbaf393362 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -382,11 +382,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index 06755702045..36ebaf0345a 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 239dddf8e1f..a45e2aac515 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 4539ece28a6..59c79a33963 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -383,11 +383,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 6112e1bceb9..873d9f0e478 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index a4b4c5c10f2..fef447308b8 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 785b6da38df..425dc60f70f 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index fb20bbabf52..c4d70c83feb 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 03f88c8b78f..1ec915e6bf2 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index a8d04080b44..3cfce272111 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -378,11 +378,13 @@
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)
  *
+ *  1000 : Custom - Specify parameters in Configuration_adv.h
+ *
  *         Use these for Testing or Development purposes. NEVER for production machine.
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  */
 #define TEMP_SENSOR_0 -2
 #define TEMP_SENSOR_1 0
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 2e5d3f03031..46105b3fa96 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -39,6 +39,57 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2