3DPrinting/MarlinFirmware
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2025-02-27 11:27:15 +00:00
Code Issues Releases Wiki Activity

📝 Describe more codes in gcode.h

Browse source
This commit is contained in:
Scott Lahteine 2024-11-15 17:35:20 -06:00
parent 09a290cc61
commit 284d07d4d8
1 changed files with 14 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

21
Marlin/src/gcode/gcode.h
View file

@ -128,6 +128,8 @@
* M84 - Disable steppers until next move, or use S<seconds> to specify an idle
* duration after which steppers should turn off. S0 disables the timeout.
* M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
* M86 - Set / Report Hotend Idle Timeout. (Requires HOTEND_IDLE_TIMEOUT)
* M87 - Cancel Hotend Idle Timeout (by setting the timeout period to 0). (Requires HOTEND_IDLE_TIMEOUT)
* M92 - Set planner.settings.axis_steps_per_mm for one or more axes. (Requires EDITABLE_STEPS_PER_UNIT)
*
* M100 - Watch Free Memory (for debugging) (Requires M100_FREE_MEMORY_WATCHER)
@ -213,6 +215,8 @@
* M281 - Set servo min|max position: "M281 P<index> L<min> U<max>". (Requires EDITABLE_SERVO_ANGLES)
* M282 - Detach servo: "M282 P<index>". (Requires SERVO_DETACH_GCODE)
* M290 - Babystepping (Requires BABYSTEPPING)
* M293 - Babystep Z UP (Requires EP_BABYSTEPPING)
* M294 - Babystep Z DOWN (Requires EP_BABYSTEPPING)
* M300 - Play beep sound S<frequency Hz> P<duration ms>
* M301 - Set PID parameters P I and D. (Requires PIDTEMP)
* M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. (Requires PREVENT_COLD_EXTRUSION)
@ -246,6 +250,7 @@
* M430 - Read the system current, voltage, and power (Requires POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE, or POWER_MONITOR_FIXED_VOLTAGE)
* M485 - Send RS485 packets (Requires RS485_SERIAL_PORT)
* M486 - Identify and cancel objects. (Requires CANCEL_OBJECTS)
* M493 - Get or set input FT Motion / Shaping parameters. (Requires FT_MOTION)
* M500 - Store parameters in EEPROM. (Requires EEPROM_SETTINGS)
* M501 - Restore parameters from EEPROM. (Requires EEPROM_SETTINGS)
* M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! **
@ -261,7 +266,7 @@
* M554 - Get or set IP gateway. (Requires enabled Ethernet port)
* M569 - Enable stealthChop on an axis. (Requires at least one _DRIVER_TYPE to be TMC2130/2160/2208/2209/5130/5160)
* M575 - Change the serial baud rate. (Requires BAUD_RATE_GCODE)
* M592 - Get or set nonlinear extrusion parameters. (Requires NONLINEAR_EXTRUSION)
* M592 - Get or set Nonlinear Extrusion parameters. (Requires NONLINEAR_EXTRUSION)
* M593 - Get or set input shaping parameters. (Requires INPUT_SHAPING_[XY])
* M600 - Pause for filament change: "M600 X<pos> Y<pos> Z<raise> E<first_retract> L<later_retract>". (Requires ADVANCED_PAUSE_FEATURE)
* M603 - Configure filament change: "M603 T<tool> U<unload_length> L<load_length>". (Requires ADVANCED_PAUSE_FEATURE)
@ -274,15 +279,17 @@
* M701 - Load filament (Requires FILAMENT_LOAD_UNLOAD_GCODES)
* M702 - Unload filament (Requires FILAMENT_LOAD_UNLOAD_GCODES)
*
* M704 - Preload to MMU (Requires PRUSA_MMU3)
* M705 - Eject filament (Requires PRUSA_MMU3)
* M706 - Cut filament (Requires PRUSA_MMU3)
* M707 - Read from MMU register (Requires PRUSA_MMU3)
* M708 - Write to MMU register (Requires PRUSA_MMU3)
* M709 - MMU power & reset (Requires PRUSA_MMU3)
*** PRUSA_MMU3 ***
* M704 - Preload to MMU
* M705 - Eject filament
* M706 - Cut filament
* M707 - Read from MMU register
* M708 - Write to MMU register
* M709 - MMU power & reset
*
* M808 - Set or Goto a Repeat Marker (Requires GCODE_REPEAT_MARKERS)
* M810-M819 - Define/execute a G-code macro (Requires GCODE_MACROS)
* M820 - Report all defined M810-M819 G-code macros (Requires GCODE_MACROS)
* M851 - Set Z probe's XYZ offsets in current units. (Negative values: X=left, Y=front, Z=below)
* M852 - Set skew factors: "M852 [I<xy>] [J<xz>] [K<yz>]". (Requires SKEW_CORRECTION_GCODE, plus SKEW_CORRECTION_FOR_Z for IJ)
*