From 296a2ad7e45d88a10db4b3305ea183e5c0c177a5 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue, 24 Nov 2020 17:38:13 -0600
Subject: [PATCH] Consistent Probe XY offset type

---
 Marlin/src/gcode/calibrate/G76_M192_M871.cpp | 2 +-
 Marlin/src/module/probe.cpp                  | 2 +-
 Marlin/src/module/probe.h                    | 6 +++---
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Marlin/src/gcode/calibrate/G76_M192_M871.cpp b/Marlin/src/gcode/calibrate/G76_M192_M871.cpp
index 38f17869fb4..8ffada5c031 100644
--- a/Marlin/src/gcode/calibrate/G76_M192_M871.cpp
+++ b/Marlin/src/gcode/calibrate/G76_M192_M871.cpp
@@ -144,7 +144,7 @@ void GcodeSuite::G76() {
 
   const xyz_pos_t parkpos = temp_comp.park_point,
             probe_pos_xyz = xyz_pos_t(temp_comp.measure_point) + xyz_pos_t({ 0.0f, 0.0f, PTC_PROBE_HEATING_OFFSET }),
-              noz_pos_xyz = probe_pos_xyz - xy_pos_t(probe.offset_xy); // Nozzle position based on probe position
+              noz_pos_xyz = probe_pos_xyz - probe.offset_xy;  // Nozzle position based on probe position
 
   if (do_bed_cal || do_probe_cal) {
     // Ensure park position is reachable
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index ff80063d658..f02b9091506 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -89,7 +89,7 @@ Probe probe;
 xyz_pos_t Probe::offset; // Initialized by settings.load()
 
 #if HAS_PROBE_XY_OFFSET
-  const xyz_pos_t &Probe::offset_xy = Probe::offset;
+  const xy_pos_t &Probe::offset_xy = xy_pos_t(Probe::offset);
 #endif
 
 #if ENABLED(Z_PROBE_SLED)
diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h
index 63229242b5d..cac106fed68 100644
--- a/Marlin/src/module/probe.h
+++ b/Marlin/src/module/probe.h
@@ -112,9 +112,9 @@ public:
   FORCE_INLINE static bool good_bounds(const xy_pos_t &lf, const xy_pos_t &rb) {
     return (
       #if IS_KINEMATIC
-         can_reach(lf.x, 0) && can_reach(rb.x, 0) && can_reach(0, lf.y) && can_reach(0, rb.y)
+        can_reach(lf.x, 0) && can_reach(rb.x, 0) && can_reach(0, lf.y) && can_reach(0, rb.y)
       #else
-         can_reach(lf) && can_reach(rb)
+        can_reach(lf) && can_reach(rb)
       #endif
     );
   }
@@ -122,7 +122,7 @@ public:
   // Use offset_xy for read only access
   // More optimal the XY offset is known to always be zero.
   #if HAS_PROBE_XY_OFFSET
-    static const xyz_pos_t &offset_xy;
+    static const xy_pos_t &offset_xy;
   #else
     static constexpr xy_pos_t offset_xy = xy_pos_t({ 0, 0 });   // See #16767
   #endif