3DPrinting/MarlinFirmware
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2025-02-27 19:36:58 +00:00
Code Issues Releases Wiki Activity

✏️ GT2560_V41b followup

Browse source
This commit is contained in:
Scott Lahteine 2023-11-21 13:59:30 -06:00
parent 6ae2cde663
commit 2b1666fcb0
2 changed files with 14 additions and 17 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/src/pins/mega/pins_GT2560_V41b.h
View file

@ -51,7 +51,7 @@
* X AXIS Y AXIS Z1 AXIS Z0 AXIS * X AXIS Y AXIS Z1 AXIS Z0 AXIS
* --- --- --- --- * --- --- --- ---
* | 1 | 5V | 1 | 5V | 1 | 5V | 1 | 5V * | 1 | 5V | 1 | 5V | 1 | 5V | 1 | 5V
* | 2 | 24 X_MIN | 2 | 28 Y_MIN | 2 | 80 Z1_MIN | 2 | 30 Z0_MIN * | 2 | 24 X_MIN | 2 | 28 Y_MIN | 2 | 80 Z1_MIN | 2 | 30 Z0_MIN
* | 3 | GND | 3 | GND | 3 | GND | 3 | GND * | 3 | GND | 3 | GND | 3 | GND | 3 | GND
* --- --- --- --- * --- --- --- ---
* J3 J4 J5 J6 * J3 J4 J5 J6

29
Marlin/src/pins/samd/pins_MINITRONICS20.h
View file

@ -60,8 +60,9 @@
#define Z_STOP_PIN 4 #define Z_STOP_PIN 4
/** /**
* NOTE: Useful if extra TMC2209 are to be used as independent axes. * NOTE: For extra TMC2209 used as independent axes a new digital PIN is needed.
* We need to configure the new digital PIN, for this we could configure on the board the extra pin of this stepper, for example as a MIN_PIN/MAX_PIN. This pin is the D14. * We can configure on the board the extra pin of this stepper,
* e.g., as a MIN_PIN/MAX_PIN. This pin is D14.
*/ */
//#define Z2_STOP_PIN 14 //#define Z2_STOP_PIN 14
//#define X2_STOP_PIN 14 //#define X2_STOP_PIN 14
@ -105,7 +106,7 @@
// This board have the option to use an extra TMC2209 stepper, one of the use could be as a second extruder. // This board have the option to use an extra TMC2209 stepper, one of the use could be as a second extruder.
#if EXTRUDERS < 2 #if EXTRUDERS < 2
// TODO: Corregir aquí que cuando tenemos dos extrusores o lo que sea, utiliza los endstop que le sobran, osea los max, no hay Z2_endstop // TODO: Correct here that when we have two extruders (or whatever), use the extra endstops. i.e., The max, there is no Z2_endstop.
#if NUM_Z_STEPPERS > 1 #if NUM_Z_STEPPERS > 1
#define Z2_STOP_PIN 14 #define Z2_STOP_PIN 14
#endif #endif
@ -117,8 +118,8 @@
#undef Z3_DRIVER_TYPE #undef Z3_DRIVER_TYPE
#undef Z4_DRIVER_TYPE #undef Z4_DRIVER_TYPE
// Si tenemos más de un extrusor lo que hacemos es definir el nuevo extrusor así como sus pines // For more than one extruder define the new extruder and its pins.
// Acordarse de definir el #define TEMP_SENSOR_1, ya que este contiene el tipo de sonda del extrusor E1 // Remember to #define TEMP_SENSOR_1, since this contains the E1 sensor type.
#define FIL_RUNOUT2_PIN 14 #define FIL_RUNOUT2_PIN 14
@ -166,13 +167,9 @@
#define EXP3_08_PIN EXP1_08_PIN #define EXP3_08_PIN EXP1_08_PIN
#endif #endif
/************************************/
/***** Configurations Section ******/
/************************************/
/** /**
* This sections starts with the pins_RAMPS_144.h as example, after if you need any new * This section is based on pins_RAMPS_144.h. To use a new display, you
* display, you could use normal duponts and connect it with with the scheme showed before. * could use normal duponts and connect with the scheme shown before.
* Tested: * Tested:
* - Ender-3 Old display (Character LCD) * - Ender-3 Old display (Character LCD)
* - Ender-3 New Serial DWING Display * - Ender-3 New Serial DWING Display
@ -427,7 +424,7 @@
// TO TEST // TO TEST
//#define BEEPER_PIN EXP2_05_PIN //#define BEEPER_PIN EXP2_05_PIN
// not connected to a pin // not connected to a pin
//#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57) //#define LCD_BACKLIGHT_PIN 57 // Backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
//#define DOGLCD_A0 EXP2_07_PIN //#define DOGLCD_A0 EXP2_07_PIN
//#define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58 //#define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58
@ -502,8 +499,8 @@
#if HAS_TMC_UART #if HAS_TMC_UART
/** /**
* Address for the UART Configuration of the TMC2209. Override in Configuration files. * TMC2209 UART Address. Override in Configuration files.
* To test TMC2209 Steppers enable TMC_DEBUG in Configuration_adv.h and test the M122 command with voltage on the steppers. * To test TMC2209 Steppers enable TMC_DEBUG and test M122 with voltage on the steppers.
*/ */
#ifndef X_SLAVE_ADDRESS #ifndef X_SLAVE_ADDRESS
#define X_SLAVE_ADDRESS 0b00 #define X_SLAVE_ADDRESS 0b00
@ -523,8 +520,8 @@
/** /**
* TMC2208/TMC2209 stepper drivers * TMC2208/TMC2209 stepper drivers
* It seems to work perfectly fine on Software Serial, if an advanced user wants to test, you could use the SAMD51 Serial1 and Serial 2. Be careful with the Sercom configurations. * Seems to work fine with Software Serial. If you want to test, use SAMD51 Serial1 and Serial2. Be careful with the Sercom configurations.
* Steppers 1,2,3,4 (X,Y,Z,E0) are on the Serial1, Sercom (RX = 0, TX = 1), extra stepper 5 (E1 or any axis you want) is on Serial2, Sercom (RX = 17, TX = 16) * Steppers 1,2,3,4 (X,Y,Z,E0) are on Serial1, Sercom (RX=0, TX=1), extra stepper 5 (E1 or any axis you want) is on Serial2, Sercom (RX=17, TX=16)
*/ */
//#define X_HARDWARE_SERIAL Serial1 //#define X_HARDWARE_SERIAL Serial1