diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index 0eb146e023..026a727339 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -691,60 +691,17 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - - // Kossel Mini - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 35.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 72.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X -46.0 // Move the probe into position - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 28.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X -46.0 // Move the nozzle down further to push the probe into retracted position. - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 8.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X -46.0 // Raise things back up slightly so we don't bump into anything - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 38.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - - // Kossel Pro + // Just like Kossel Pro #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00 #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00 #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00 #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0 @@ -754,15 +711,18 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00 #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0 #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ + #define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe #define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00 #define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0 #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/2 + #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0 // return to 0,0,100 #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0 #define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0 #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - #endif + + #endif // Z_PROBE_ALLEN_KEY // If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing, // it is highly recommended you also enable Z_SAFE_HOMING below! diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index b0ffebf814..dea1dfe831 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -695,6 +695,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 @@ -704,65 +705,18 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ + #define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down #define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 #define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 + #define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear #define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 #define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - // Kossel Mini - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 35.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 72.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X -46.0 // Move the probe into position - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 28.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X -46.0 // Move the nozzle down further to push the probe into retracted position. - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 8.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X -46.0 // Raise things back up slightly so we don't bump into anything - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 38.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - - // Kossel Pro - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (HOMING_FEEDRATE_XYZ)/2 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/2 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0 // return to 0,0,100 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - #endif + #endif // Z_PROBE_ALLEN_KEY // If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing, // it is highly recommended you also enable Z_SAFE_HOMING below! diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index b58d89793c..b262989131 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -691,33 +691,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - // Kossel Mini #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 @@ -740,33 +719,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define Z_PROBE_ALLEN_KEY_STOW_3_Z (Z_PROBE_ALLEN_KEY_STOW_1_Z+Z_PROBE_ALLEN_KEY_STOW_DEPTH) #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_TRAVEL_SPEED/2) - // Kossel Pro - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (HOMING_FEEDRATE_XYZ)/2 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/2 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0 // return to 0,0,100 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - #endif + #endif // Z_PROBE_ALLEN_KEY // If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing, // it is highly recommended you also enable Z_SAFE_HOMING below! diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 73018034de..d87239d1aa 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -682,60 +682,17 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - - // Kossel Mini - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 35.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 72.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X -46.0 // Move the probe into position - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 28.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X -46.0 // Move the nozzle down further to push the probe into retracted position. - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 8.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X -46.0 // Raise things back up slightly so we don't bump into anything - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 38.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - // Kossel Pro #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00 #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00 #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z Z_PROBE_ALLEN_KEY_DEPLOY_1_Z #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00 #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z @@ -745,15 +702,18 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define Z_PROBE_ALLEN_KEY_STOW_1_Y -125.00 #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0 #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ + #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X // move down to retract probe #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y #define Z_PROBE_ALLEN_KEY_STOW_2_Z 0.0 #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/2 + #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0 // return to 0,0,100 #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0 #define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0 #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - #endif + + #endif // Z_PROBE_ALLEN_KEY // If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing, // it is highly recommended you also enable Z_SAFE_HOMING below! diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index f8374a8134..fa4e96d58f 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -693,6 +693,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ + //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 @@ -702,65 +703,18 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ + //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 + //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - // Kossel Mini - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 35.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 72.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y 0.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X -46.0 // Move the probe into position - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 28.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X -46.0 // Move the nozzle down further to push the probe into retracted position. - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 8.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X -46.0 // Raise things back up slightly so we don't bump into anything - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 59.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 38.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - - // Kossel Pro - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (HOMING_FEEDRATE_XYZ)/2 - - //#define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip - //#define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00 - //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0 - //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ - //#define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe - //#define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00 - //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0 - //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/2 - //#define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0 // return to 0,0,100 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0 - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ - #endif + #endif // Z_PROBE_ALLEN_KEY // If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing, // it is highly recommended you also enable Z_SAFE_HOMING below!