3DPrinting/MarlinFirmware
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2025-01-31 14:12:52 +00:00
Code Issues Releases Wiki Activity

🎨 Rename *_temp_error to *temp_error

Browse source
This commit is contained in:
Scott Lahteine 2023-01-03 18:57:33 -06:00
parent b28c4fe1e6
commit 2dcf3b8550
3 changed files with 30 additions and 30 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
Marlin/Configuration_adv.h
View file

@ -472,10 +472,10 @@
* Thermistors able to support high temperature tend to have a hard time getting
* good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP
* will probably be caught when the heating element first turns on during the
* preheating process, which will trigger a min_temp_error as a safety measure
* preheating process, which will trigger a MINTEMP error as a safety measure
* and force stop everything.
* To circumvent this limitation, we allow for a preheat time (during which,
* min_temp_error won't be triggered) and add a min_temp buffer to handle
* MINTEMP error won't be triggered) and add a min_temp buffer to handle
* aberrant readings.
*
* If you want to enable this feature for your hotend thermistor(s)
@ -483,7 +483,7 @@
*/
// The number of consecutive low temperature errors that can occur
// before a min_temp_error is triggered. (Shouldn't be more than 10.)
// before a MINTEMP error is triggered. (Shouldn't be more than 10.)
//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
/**

50
Marlin/src/module/temperature.cpp
View file

@ -1314,14 +1314,14 @@ void Temperature::_temp_error(const heater_id_t heater_id, FSTR_P const serial_m
#endif
}
void Temperature::max_temp_error(const heater_id_t heater_id) {
void Temperature::maxtemp_error(const heater_id_t heater_id) {
#if HAS_DWIN_E3V2_BASIC && (HAS_HOTEND || HAS_HEATED_BED)
DWIN_Popup_Temperature(1);
#endif
_temp_error(heater_id, F(STR_T_MAXTEMP), GET_TEXT_F(MSG_ERR_MAXTEMP));
}
void Temperature::min_temp_error(const heater_id_t heater_id) {
void Temperature::mintemp_error(const heater_id_t heater_id) {
#if HAS_DWIN_E3V2_BASIC && (HAS_HOTEND || HAS_HEATED_BED)
DWIN_Popup_Temperature(0);
#endif
@ -1525,7 +1525,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
void Temperature::manage_hotends(const millis_t &ms) {
HOTEND_LOOP() {
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
if (degHotend(e) > temp_range[e].maxtemp) max_temp_error((heater_id_t)e);
if (degHotend(e) > temp_range[e].maxtemp) maxtemp_error((heater_id_t)e);
#endif
TERN_(HEATER_IDLE_HANDLER, heater_idle[e].update(ms));
@ -1559,7 +1559,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
void Temperature::manage_heated_bed(const millis_t &ms) {
#if ENABLED(THERMAL_PROTECTION_BED)
if (degBed() > BED_MAXTEMP) max_temp_error(H_BED);
if (degBed() > BED_MAXTEMP) maxtemp_error(H_BED);
#endif
#if WATCH_BED
@ -1641,7 +1641,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
#endif
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
if (degChamber() > CHAMBER_MAXTEMP) max_temp_error(H_CHAMBER);
if (degChamber() > CHAMBER_MAXTEMP) maxtemp_error(H_CHAMBER);
#endif
#if WATCH_CHAMBER
@ -1768,7 +1768,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
#endif
#if ENABLED(THERMAL_PROTECTION_COOLER)
if (degCooler() > COOLER_MAXTEMP) max_temp_error(H_COOLER);
if (degCooler() > COOLER_MAXTEMP) maxtemp_error(H_COOLER);
#endif
#if WATCH_COOLER
@ -1860,20 +1860,20 @@ void Temperature::task() {
#if DISABLED(IGNORE_THERMOCOUPLE_ERRORS)
#if TEMP_SENSOR_IS_MAX_TC(0)
if (degHotend(0) > _MIN(HEATER_0_MAXTEMP, TEMP_SENSOR_0_MAX_TC_TMAX - 1.0)) max_temp_error(H_E0);
if (degHotend(0) < _MAX(HEATER_0_MINTEMP, TEMP_SENSOR_0_MAX_TC_TMIN + .01)) min_temp_error(H_E0);
if (degHotend(0) > _MIN(HEATER_0_MAXTEMP, TEMP_SENSOR_0_MAX_TC_TMAX - 1.0)) maxtemp_error(H_E0);
if (degHotend(0) < _MAX(HEATER_0_MINTEMP, TEMP_SENSOR_0_MAX_TC_TMIN + .01)) mintemp_error(H_E0);
#endif
#if TEMP_SENSOR_IS_MAX_TC(1)
if (degHotend(1) > _MIN(HEATER_1_MAXTEMP, TEMP_SENSOR_1_MAX_TC_TMAX - 1.0)) max_temp_error(H_E1);
if (degHotend(1) < _MAX(HEATER_1_MINTEMP, TEMP_SENSOR_1_MAX_TC_TMIN + .01)) min_temp_error(H_E1);
if (degHotend(1) > _MIN(HEATER_1_MAXTEMP, TEMP_SENSOR_1_MAX_TC_TMAX - 1.0)) maxtemp_error(H_E1);
if (degHotend(1) < _MAX(HEATER_1_MINTEMP, TEMP_SENSOR_1_MAX_TC_TMIN + .01)) mintemp_error(H_E1);
#endif
#if TEMP_SENSOR_IS_MAX_TC(2)
if (degHotend(2) > _MIN(HEATER_2_MAXTEMP, TEMP_SENSOR_2_MAX_TC_TMAX - 1.0)) max_temp_error(H_E2);
if (degHotend(2) < _MAX(HEATER_2_MINTEMP, TEMP_SENSOR_2_MAX_TC_TMIN + .01)) min_temp_error(H_E2);
if (degHotend(2) > _MIN(HEATER_2_MAXTEMP, TEMP_SENSOR_2_MAX_TC_TMAX - 1.0)) maxtemp_error(H_E2);
if (degHotend(2) < _MAX(HEATER_2_MINTEMP, TEMP_SENSOR_2_MAX_TC_TMIN + .01)) mintemp_error(H_E2);
#endif
#if TEMP_SENSOR_IS_MAX_TC(REDUNDANT)
if (degRedundant() > TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX - 1.0) max_temp_error(H_REDUNDANT);
if (degRedundant() < TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN + .01) min_temp_error(H_REDUNDANT);
if (degRedundant() > TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX - 1.0) maxtemp_error(H_REDUNDANT);
if (degRedundant() < TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN + .01) mintemp_error(H_REDUNDANT);
#endif
#else
#warning "Safety Alert! Disable IGNORE_THERMOCOUPLE_ERRORS for the final build!"
@ -2384,7 +2384,7 @@ void Temperature::updateTemperaturesFromRawValues() {
const raw_adc_t r = temp_hotend[e].getraw();
const bool neg = temp_dir[e] < 0, pos = temp_dir[e] > 0;
if ((neg && r < temp_range[e].raw_max) || (pos && r > temp_range[e].raw_max))
max_temp_error((heater_id_t)e);
maxtemp_error((heater_id_t)e);
/**
// DEBUG PREHEATING TIME
@ -2396,7 +2396,7 @@ void Temperature::updateTemperaturesFromRawValues() {
const bool heater_on = temp_hotend[e].target > 0;
if (heater_on && !is_preheating(e) && ((neg && r > temp_range[e].raw_min) || (pos && r < temp_range[e].raw_min))) {
if (TERN1(MULTI_MAX_CONSECUTIVE_LOW_TEMP_ERR, ++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED))
min_temp_error((heater_id_t)e);
mintemp_error((heater_id_t)e);
}
else {
TERN_(MULTI_MAX_CONSECUTIVE_LOW_TEMP_ERR, consecutive_low_temperature_error[e] = 0);
@ -2407,23 +2407,23 @@ void Temperature::updateTemperaturesFromRawValues() {
#define TP_CMP(S,A,B) (TEMPDIR(S) < 0 ? ((A)<(B)) : ((A)>(B)))
#if ENABLED(THERMAL_PROTECTION_BED)
if (TP_CMP(BED, temp_bed.getraw(), maxtemp_raw_BED)) max_temp_error(H_BED);
if (temp_bed.target > 0 && TP_CMP(BED, mintemp_raw_BED, temp_bed.getraw())) min_temp_error(H_BED);
if (TP_CMP(BED, temp_bed.getraw(), maxtemp_raw_BED)) maxtemp_error(H_BED);
if (temp_bed.target > 0 && TP_CMP(BED, mintemp_raw_BED, temp_bed.getraw())) mintemp_error(H_BED);
#endif
#if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER)
if (TP_CMP(CHAMBER, temp_chamber.getraw(), maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER);
if (temp_chamber.target > 0 && TP_CMP(CHAMBER, mintemp_raw_CHAMBER, temp_chamber.getraw())) min_temp_error(H_CHAMBER);
if (TP_CMP(CHAMBER, temp_chamber.getraw(), maxtemp_raw_CHAMBER)) maxtemp_error(H_CHAMBER);
if (temp_chamber.target > 0 && TP_CMP(CHAMBER, mintemp_raw_CHAMBER, temp_chamber.getraw())) mintemp_error(H_CHAMBER);
#endif
#if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER)
if (cutter.unitPower > 0 && TP_CMP(COOLER, temp_cooler.getraw(), maxtemp_raw_COOLER)) max_temp_error(H_COOLER);
if (TP_CMP(COOLER, mintemp_raw_COOLER, temp_cooler.getraw())) min_temp_error(H_COOLER);
if (cutter.unitPower > 0 && TP_CMP(COOLER, temp_cooler.getraw(), maxtemp_raw_COOLER)) maxtemp_error(H_COOLER);
if (TP_CMP(COOLER, mintemp_raw_COOLER, temp_cooler.getraw())) mintemp_error(H_COOLER);
#endif
#if BOTH(HAS_TEMP_BOARD, THERMAL_PROTECTION_BOARD)
if (TP_CMP(BOARD, temp_board.getraw(), maxtemp_raw_BOARD)) max_temp_error(H_BOARD);
if (TP_CMP(BOARD, mintemp_raw_BOARD, temp_board.getraw())) min_temp_error(H_BOARD);
if (TP_CMP(BOARD, temp_board.getraw(), maxtemp_raw_BOARD)) maxtemp_error(H_BOARD);
if (TP_CMP(BOARD, mintemp_raw_BOARD, temp_board.getraw())) mintemp_error(H_BOARD);
#endif
#undef TP_CMP
@ -3138,7 +3138,7 @@ void Temperature::disable_all_heaters() {
#endif
// Handle an error. If there have been more than THERMOCOUPLE_MAX_ERRORS, send an error over serial.
// Either way, return the TMAX for the thermocouple to trigger a max_temp_error()
// Either way, return the TMAX for the thermocouple to trigger a maxtemp_error()
if (max_tc_temp & MAX_TC_ERROR_MASK) {
max_tc_errors[hindex]++;

4
Marlin/src/module/temperature.h
View file

@ -1252,8 +1252,8 @@ class Temperature {
#endif
static void _temp_error(const heater_id_t e, FSTR_P const serial_msg, FSTR_P const lcd_msg);
static void min_temp_error(const heater_id_t e);
static void max_temp_error(const heater_id_t e);
static void mintemp_error(const heater_id_t e);
static void maxtemp_error(const heater_id_t e);
#define HAS_THERMAL_PROTECTION ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_COOLER)