mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-23 12:04:19 +00:00
✨ Add TEMP_SENSOR_BOARD (#22279)
This commit is contained in:
Katelyn Schiesser
GitHub
parent
4b63578a10
commit
2f6c8e1176
@ -474,7 +474,7 @@
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
*
|
||||
* Custom/Dummy/Other Thermos
|
||||
* Custom/Dummy/Other Thermal Sensors
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
@ -496,6 +496,7 @@
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
#define TEMP_SENSOR_BOARD 0
|
||||
#define TEMP_SENSOR_REDUNDANT 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
@ -528,17 +529,11 @@
|
||||
* the print will be aborted. Whichever sensor is selected will have its normal functions disabled; i.e. selecting
|
||||
* the Bed sensor (-1) will disable bed heating/monitoring.
|
||||
*
|
||||
* Use the following to select temp sensors:
|
||||
* -5 : Cooler
|
||||
* -4 : Probe
|
||||
* -3 : not used
|
||||
* -2 : Chamber
|
||||
* -1 : Bed
|
||||
* 0-7 : E0 through E7
|
||||
* For selecting source/target use: COOLER, PROBE, BOARD, CHAMBER, BED, E0, E1, E2, E3, E4, E5, E6, E7
|
||||
*/
|
||||
#if TEMP_SENSOR_REDUNDANT
|
||||
#define TEMP_SENSOR_REDUNDANT_SOURCE 1 // The sensor that will provide the redundant reading.
|
||||
#define TEMP_SENSOR_REDUNDANT_TARGET 0 // The sensor that we are providing a redundant reading for.
|
||||
#define TEMP_SENSOR_REDUNDANT_SOURCE E1 // The sensor that will provide the redundant reading.
|
||||
#define TEMP_SENSOR_REDUNDANT_TARGET E0 // The sensor that we are providing a redundant reading for.
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
|
||||
#endif
|
||||
|
||||
|
||||
@ -125,6 +125,12 @@
|
||||
#define PROBE_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BOARD == 1000
|
||||
#define BOARD_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define BOARD_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define BOARD_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT == 1000
|
||||
#define REDUNDANT_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
@ -224,6 +230,18 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Motherboard Sensor options
|
||||
//
|
||||
#if TEMP_SENSOR_BOARD
|
||||
#define THERMAL_PROTECTION_BOARD // Halt the printer if the board sensor leaves the temp range below.
|
||||
#define BOARD_MINTEMP 8 // (°C)
|
||||
#define BOARD_MAXTEMP 70 // (°C)
|
||||
#ifndef TEMP_BOARD_PIN
|
||||
//#define TEMP_BOARD_PIN -1 // Board temp sensor pin, if not set in pins file.
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Coolant Flow Meter
|
||||
//
|
||||
@ -487,6 +505,10 @@
|
||||
#define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
|
||||
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
|
||||
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
|
||||
|
||||
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
|
||||
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
|
||||
|
||||
//#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
|
||||
#if ENABLED(CONTROLLER_FAN_EDITABLE)
|
||||
#define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu
|
||||
|
||||
@ -1168,10 +1168,10 @@ void setup() {
|
||||
SETUP_RUN(HAL_init());
|
||||
|
||||
// Init and disable SPI thermocouples; this is still needed
|
||||
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0)
|
||||
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0))
|
||||
OUT_WRITE(TEMP_0_CS_PIN, HIGH); // Disable
|
||||
#endif
|
||||
#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
|
||||
#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1))
|
||||
OUT_WRITE(TEMP_1_CS_PIN, HIGH);
|
||||
#endif
|
||||
|
||||
|
||||
@ -231,6 +231,9 @@
|
||||
#define STR_HEATER_BED "bed"
|
||||
#define STR_HEATER_CHAMBER "chamber"
|
||||
#define STR_COOLER "cooler"
|
||||
#define STR_MOTHERBOARD "motherboard"
|
||||
#define STR_PROBE "probe"
|
||||
#define STR_REDUNDANT "redundant "
|
||||
#define STR_LASER_TEMP "laser temperature"
|
||||
|
||||
#define STR_STOPPED_HEATER ", system stopped! Heater_ID: "
|
||||
|
||||
@ -76,9 +76,14 @@ void ControllerFan::update() {
|
||||
)
|
||||
);
|
||||
|
||||
// If any of the drivers or the heated bed are enabled...
|
||||
if (motor_on || TERN0(HAS_HEATED_BED, thermalManager.temp_bed.soft_pwm_amount > 0))
|
||||
lastMotorOn = ms; //... set time to NOW so the fan will turn on
|
||||
// If any triggers for the controller fan are true...
|
||||
// - At least one stepper driver is enabled
|
||||
// - The heated bed is enabled
|
||||
// - TEMP_SENSOR_BOARD is reporting >= CONTROLLER_FAN_MIN_BOARD_TEMP
|
||||
if ( motor_on
|
||||
|| TERN0(HAS_HEATED_BED, thermalManager.temp_bed.soft_pwm_amount > 0)
|
||||
|| TERN0(HAS_CONTROLLER_FAN_MIN_BOARD_TEMP, thermalManager.wholeDegBoard() >= CONTROLLER_FAN_MIN_BOARD_TEMP)
|
||||
) lastMotorOn = ms; //... set time to NOW so the fan will turn on
|
||||
|
||||
// Fan Settings. Set fan > 0:
|
||||
// - If AutoMode is on and steppers have been enabled for CONTROLLERFAN_IDLE_TIME seconds.
|
||||
|
||||
@ -125,6 +125,29 @@
|
||||
#undef THERMAL_PROTECTION_COOLER
|
||||
#endif
|
||||
|
||||
// Usurp a sensor to do redundant readings
|
||||
#if TEMP_SENSOR_REDUNDANT
|
||||
#define REDUNDANT_TEMP_MATCH(M,N) (TEMP_SENSOR_REDUNDANT_##M == HID_##N)
|
||||
#else
|
||||
#define REDUNDANT_TEMP_MATCH(...) 0
|
||||
#endif
|
||||
|
||||
// Temperature sensor IDs
|
||||
#define HID_REDUNDANT -6
|
||||
#define HID_COOLER -5
|
||||
#define HID_PROBE -4
|
||||
#define HID_BOARD -3
|
||||
#define HID_CHAMBER -2
|
||||
#define HID_BED -1
|
||||
#define HID_E0 0
|
||||
#define HID_E1 1
|
||||
#define HID_E2 2
|
||||
#define HID_E3 3
|
||||
#define HID_E4 4
|
||||
#define HID_E5 5
|
||||
#define HID_E6 6
|
||||
#define HID_E7 7
|
||||
|
||||
#if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS))
|
||||
#define HAS_MIXER_SYNC_CHANNEL 1
|
||||
#endif
|
||||
|
||||
@ -532,84 +532,84 @@
|
||||
// Usurp a sensor to do redundant readings
|
||||
#if TEMP_SENSOR_REDUNDANT
|
||||
#ifndef TEMP_SENSOR_REDUNDANT_SOURCE
|
||||
#define TEMP_SENSOR_REDUNDANT_SOURCE 1
|
||||
#define TEMP_SENSOR_REDUNDANT_SOURCE E1
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_REDUNDANT_TARGET
|
||||
#define TEMP_SENSOR_REDUNDANT_TARGET 0
|
||||
#define TEMP_SENSOR_REDUNDANT_TARGET E0
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_REDUNDANT)
|
||||
#ifndef TEMP_SENSOR_REDUNDANT_MAX_DIFF
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10
|
||||
#endif
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE == -5
|
||||
#if REDUNDANT_TEMP_MATCH(SOURCE, COOLER)
|
||||
#if !PIN_EXISTS(TEMP_COOLER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to COOLER requires TEMP_COOLER_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_COOLER_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -4
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE)
|
||||
#if !PIN_EXISTS(TEMP_PROBE)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to PROBE requires TEMP_PROBE_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_PROBE_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -2
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER)
|
||||
#if !PIN_EXISTS(TEMP_CHAMBER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to CHAMBER requires TEMP_CHAMBER_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_CHAMBER_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -1
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, BED)
|
||||
#if !PIN_EXISTS(TEMP_BED)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to BED requires TEMP_BED_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_BED_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 0
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E0)
|
||||
#if !PIN_EXISTS(TEMP_0)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 0 requires TEMP_0_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E0 requires TEMP_0_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_0_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 1
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#if !PIN_EXISTS(TEMP_1)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 1 requires TEMP_1_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E1 requires TEMP_1_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_1_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 2
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E2)
|
||||
#if !PIN_EXISTS(TEMP_2)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 2 requires TEMP_2_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E2 requires TEMP_2_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_2_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 3
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E3)
|
||||
#if !PIN_EXISTS(TEMP_3)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 3 requires TEMP_3_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E3 requires TEMP_3_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_3_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 4
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E4)
|
||||
#if !PIN_EXISTS(TEMP_4)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 4 requires TEMP_4_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E4 requires TEMP_4_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_4_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 5
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E5)
|
||||
#if !PIN_EXISTS(TEMP_5)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 5 requires TEMP_5_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E5 requires TEMP_5_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_5_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 6
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E6)
|
||||
#if !PIN_EXISTS(TEMP_6)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 6 requires TEMP_6_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E6 requires TEMP_6_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_6_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 7
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E7)
|
||||
#if !PIN_EXISTS(TEMP_7)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 7 requires TEMP_7_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E7 requires TEMP_7_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_7_PIN
|
||||
#endif
|
||||
@ -699,7 +699,7 @@
|
||||
#define TEMP_SENSOR_REDUNDANT_IS_MAX_TC 1
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT == -5
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
|
||||
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#error "MAX31865 Thermocouples (-5) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)."
|
||||
#endif
|
||||
|
||||
@ -707,7 +707,7 @@
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024
|
||||
#elif TEMP_SENSOR_REDUNDANT == -3
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
|
||||
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)."
|
||||
#endif
|
||||
|
||||
@ -715,7 +715,7 @@
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN -270
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1800
|
||||
#elif TEMP_SENSOR_REDUNDANT == -2
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
|
||||
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)."
|
||||
#endif
|
||||
|
||||
@ -725,13 +725,13 @@
|
||||
#endif
|
||||
|
||||
// mimic setting up the source TEMP_SENSOR
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE == 0
|
||||
#if REDUNDANT_TEMP_MATCH(SOURCE, E0)
|
||||
#define TEMP_SENSOR_0_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN
|
||||
#define TEMP_SENSOR_0_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX
|
||||
#ifndef MAX31865_SENSOR_WIRES_0
|
||||
#define MAX31865_SENSOR_WIRES_0 2
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 1
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#define TEMP_SENSOR_1_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN
|
||||
#define TEMP_SENSOR_1_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX
|
||||
#ifndef MAX31865_SENSOR_WIRES_1
|
||||
@ -780,7 +780,7 @@
|
||||
#if HAS_MAX_TC
|
||||
|
||||
// Translate old _SS, _CS, _SCK, _DO, _DI, _MISO, and _MOSI PIN defines.
|
||||
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
|
||||
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1))
|
||||
|
||||
#if !PIN_EXISTS(TEMP_0_CS) // SS, CS
|
||||
#if PIN_EXISTS(MAX6675_SS)
|
||||
@ -849,7 +849,7 @@
|
||||
|
||||
#endif // TEMP_SENSOR_0_IS_MAX_TC
|
||||
|
||||
#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
|
||||
#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1))
|
||||
|
||||
#if !PIN_EXISTS(TEMP_1_CS) // SS2, CS2
|
||||
#if PIN_EXISTS(MAX6675_SS2)
|
||||
@ -2584,6 +2584,9 @@
|
||||
#if HAS_ADC_TEST(COOLER)
|
||||
#define HAS_TEMP_ADC_COOLER 1
|
||||
#endif
|
||||
#if HAS_ADC_TEST(BOARD)
|
||||
#define HAS_TEMP_ADC_BOARD 1
|
||||
#endif
|
||||
#if HAS_ADC_TEST(REDUNDANT)
|
||||
#define HAS_TEMP_ADC_REDUNDANT 1
|
||||
#endif
|
||||
@ -2604,6 +2607,9 @@
|
||||
#if HAS_TEMP(COOLER)
|
||||
#define HAS_TEMP_COOLER 1
|
||||
#endif
|
||||
#if HAS_TEMP(BOARD)
|
||||
#define HAS_TEMP_BOARD 1
|
||||
#endif
|
||||
#if HAS_TEMP(REDUNDANT)
|
||||
#define HAS_TEMP_REDUNDANT 1
|
||||
#endif
|
||||
@ -2675,7 +2681,8 @@
|
||||
#if HAS_HEATED_BED || HAS_TEMP_CHAMBER
|
||||
#define BED_OR_CHAMBER 1
|
||||
#endif
|
||||
#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER
|
||||
|
||||
#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER || HAS_TEMP_BOARD
|
||||
#define HAS_TEMP_SENSOR 1
|
||||
#endif
|
||||
|
||||
@ -2813,9 +2820,6 @@
|
||||
#endif
|
||||
#undef _NOT_E_AUTO
|
||||
#undef _HAS_FAN
|
||||
#if PIN_EXISTS(CONTROLLER_FAN)
|
||||
#define HAS_CONTROLLER_FAN 1
|
||||
#endif
|
||||
|
||||
#if BED_OR_CHAMBER || HAS_FAN0
|
||||
#define BED_OR_CHAMBER_OR_FAN 1
|
||||
@ -2892,6 +2896,27 @@
|
||||
#define FAST_PWM_FAN_FREQUENCY ((F_CPU) / (2 * 255 * 1)) // Fan frequency default
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Controller Fan Settings
|
||||
*/
|
||||
#if PIN_EXISTS(CONTROLLER_FAN)
|
||||
#define HAS_CONTROLLER_FAN 1
|
||||
#if CONTROLLER_FAN_MIN_BOARD_TEMP
|
||||
#define HAS_CONTROLLER_FAN_MIN_BOARD_TEMP 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_CONTROLLER_FAN
|
||||
#if ENABLED(CONTROLLER_FAN_USE_BOARD_TEMP)
|
||||
#define HAS_CONTROLLER_FAN_BOARD_TEMP_TRIGGER 1
|
||||
#ifndef CONTROLLER_FAN_TRIGGER_TEMP
|
||||
#define CONTROLLER_FAN_TRIGGER_TEMP 30
|
||||
#endif
|
||||
#else
|
||||
#undef CONTROLLER_FAN_TRIGGER_TEMP
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Servos
|
||||
#if PIN_EXISTS(SERVO0) && NUM_SERVOS > 0
|
||||
#define HAS_SERVO_0 1
|
||||
|
||||
@ -583,6 +583,10 @@
|
||||
#error "TEMP_SENSOR_1_AS_REDUNDANT is now TEMP_SENSOR_REDUNDANT, with associated TEMP_SENSOR_REDUNDANT_* config."
|
||||
#elif defined(MAX_REDUNDANT_TEMP_SENSOR_DIFF)
|
||||
#error "MAX_REDUNDANT_TEMP_SENSOR_DIFF is now TEMP_SENSOR_REDUNDANT_MAX_DIFF"
|
||||
#elif MOTHERBOARD == BOARD_DUE3DOM_MINI && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD)
|
||||
#warning "Onboard temperature sensor for BOARD_DUE3DOM_MINI has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)."
|
||||
#elif MOTHERBOARD == BOARD_BTT_SKR_E3_TURBO && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD)
|
||||
#warning "Onboard temperature sensor for BOARD_BTT_SKR_E3_TURBO has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)."
|
||||
#endif
|
||||
|
||||
constexpr float arm[] = AXIS_RELATIVE_MODES;
|
||||
@ -1959,6 +1963,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "TEMP_SENSOR_CHAMBER 1000 requires CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS and CHAMBER_BETA in Configuration_adv.h."
|
||||
#elif TEMP_SENSOR_PROBE_IS_CUSTOM && !(defined(PROBE_PULLUP_RESISTOR_OHMS) && defined(PROBE_RESISTANCE_25C_OHMS) && defined(PROBE_BETA))
|
||||
#error "TEMP_SENSOR_PROBE 1000 requires PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS and PROBE_BETA in Configuration_adv.h."
|
||||
#elif TEMP_SENSOR_BOARD_IS_CUSTOM && !(defined(BOARD_PULLUP_RESISTOR_OHMS) && defined(BOARD_RESISTANCE_25C_OHMS) && defined(BOARD_BETA))
|
||||
#error "TEMP_SENSOR_BOARD 1000 requires BOARD_PULLUP_RESISTOR_OHMS, BOARD_RESISTANCE_25C_OHMS and BOARD_BETA in Configuration_adv.h."
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_CUSTOM && !(defined(REDUNDANT_PULLUP_RESISTOR_OHMS) && defined(REDUNDANT_RESISTANCE_25C_OHMS) && defined(REDUNDANT_BETA))
|
||||
#error "TEMP_SENSOR_REDUNDANT 1000 requires REDUNDANT_PULLUP_RESISTOR_OHMS, REDUNDANT_RESISTANCE_25C_OHMS and REDUNDANT_BETA in Configuration_adv.h."
|
||||
#endif
|
||||
@ -1966,14 +1972,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
/**
|
||||
* Required MAX31865 settings
|
||||
*/
|
||||
#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 0)
|
||||
#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E0))
|
||||
#if !defined(MAX31865_SENSOR_WIRES_0) || !WITHIN(MAX31865_SENSOR_WIRES_0, 2, 4)
|
||||
#error "MAX31865_SENSOR_WIRES_0 must be defined as an integer between 2 and 4."
|
||||
#elif !defined(MAX31865_SENSOR_OHMS_0) || !defined(MAX31865_CALIBRATION_OHMS_0)
|
||||
#error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set if TEMP_SENSOR_0/TEMP_SENSOR_REDUNDANT is MAX31865."
|
||||
#endif
|
||||
#endif
|
||||
#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
|
||||
#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E1))
|
||||
#if !defined(MAX31865_SENSOR_WIRES_1) || !WITHIN(MAX31865_SENSOR_WIRES_1, 2, 4)
|
||||
#error "MAX31865_SENSOR_WIRES_1 must be defined as an integer between 2 and 4."
|
||||
#elif !defined(MAX31865_SENSOR_OHMS_1) || !defined(MAX31865_CALIBRATION_OHMS_1)
|
||||
@ -1989,62 +1995,58 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_SOURCE."
|
||||
#elif !defined(TEMP_SENSOR_REDUNDANT_TARGET)
|
||||
#error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_TARGET."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == TEMP_SENSOR_REDUNDANT_TARGET
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, TEMP_SENSOR_REDUNDANT_TARGET)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be the same as TEMP_SENSOR_REDUNDANT_TARGET."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE < -5 || TEMP_SENSOR_REDUNDANT_SOURCE > 7
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE must be between -5 and 7."
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET < -5 || TEMP_SENSOR_REDUNDANT_TARGET > 7
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET must be between -5 and 7."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -3
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be -3 (not used)."
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -3
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be -3 (not used)."
|
||||
#elif HAS_MULTI_HOTEND && TEMP_SENSOR_REDUNDANT_SOURCE < HOTENDS
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last TEMP_SENSOR used with a hotend; you can't use a sensor in the middle of two hotends."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last used hotend TEMP_SENSOR."
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE == 0 && HAS_HOTEND
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can not be 0 if a hotend is used. E0 always uses TEMP_SENSOR_0."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -5 && HAS_TEMP_COOLER
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Cooler (-5): TEMP_SENSOR_COOLER has already defined the sensor."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -4 && HAS_TEMP_PROBE
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Probe (-4): TEMP_SENSOR_PROBE has already defined the sensor."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -2 && HAS_TEMP_CHAMBER
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Chamber (-2): TEMP_SENSOR_CHAMBER has already defined the sensor."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -1 && HAS_TEMP_BED
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Bed (-1): TEMP_SENSOR_BED has already defined the sensor."
|
||||
#if REDUNDANT_TEMP_MATCH(SOURCE, E0) && HAS_HOTEND
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be 0 if a hotend is used. E0 always uses TEMP_SENSOR_0."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, COOLER) && HAS_TEMP_COOLER
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be COOLER. TEMP_SENSOR_COOLER is in use."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE) && HAS_TEMP_PROBE
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be PROBE. TEMP_SENSOR_PROBE is in use."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, BOARD) && HAS_TEMP_BOARD
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BOARD. TEMP_SENSOR_BOARD is in use."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER) && HAS_TEMP_CHAMBER
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be CHAMBER. TEMP_SENSOR_CHAMBER is in use."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, BED) && HAS_TEMP_BED
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BED. TEMP_SENSOR_BED is in use."
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT_TARGET == 0 && !PIN_EXISTS(TEMP_0)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 (0): requires TEMP_0_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 1 && !PIN_EXISTS(TEMP_1)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 (1): requires TEMP_1_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 2 && !PIN_EXISTS(TEMP_2)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 (2): requires TEMP_2_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 3 && !PIN_EXISTS(TEMP_3)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 (3): requires TEMP_3_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 4 && !PIN_EXISTS(TEMP_4)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 (4): requires TEMP_4_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 5 && !PIN_EXISTS(TEMP_5)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 (5): requires TEMP_5_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 6 && !PIN_EXISTS(TEMP_6)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 (6): requires TEMP_6_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 7 && !PIN_EXISTS(TEMP_7)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 (7): requires TEMP_7_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -1 && !PIN_EXISTS(TEMP_BED)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Bed (-1): requires TEMP_BED_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -2 && !PIN_EXISTS(TEMP_CHAMBER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Chamber (-2): requires TEMP_CHAMBER_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -4 && !PIN_EXISTS(TEMP_PROBE)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Probe (-4): requires TEMP_PROBE_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -5 && !PIN_EXISTS(TEMP_COOLER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Cooler (-5): requires TEMP_COOLER_PIN"
|
||||
#if REDUNDANT_TEMP_MATCH(TARGET, E0) && !PIN_EXISTS(TEMP_0)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 without TEMP_0_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E1) && !PIN_EXISTS(TEMP_1)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 without TEMP_1_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E2) && !PIN_EXISTS(TEMP_2)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 without TEMP_2_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E3) && !PIN_EXISTS(TEMP_3)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 without TEMP_3_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E4) && !PIN_EXISTS(TEMP_4)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 without TEMP_4_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E5) && !PIN_EXISTS(TEMP_5)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 without TEMP_5_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E6) && !PIN_EXISTS(TEMP_6)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 without TEMP_6_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E7) && !PIN_EXISTS(TEMP_7)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 without TEMP_7_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, BED) && !PIN_EXISTS(TEMP_BED)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be BED without TEMP_BED_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, CHAMBER) && !PIN_EXISTS(TEMP_CHAMBER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be CHAMBER without TEMP_CHAMBER_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, BOARD) && !PIN_EXISTS(TEMP_BOARD)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be BOARD without TEMP_BOARD_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, PROBE) && !PIN_EXISTS(TEMP_PROBE)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be PROBE without TEMP_PROBE_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, COOLER) && !PIN_EXISTS(TEMP_COOLER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be COOLER without TEMP_COOLER_PIN defined."
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0 && !PIN_EXISTS(TEMP_0_CS)
|
||||
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE 0 requires TEMP_0_CS_PIN."
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1 && !PIN_EXISTS(TEMP_1_CS)
|
||||
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE 1 requires TEMP_1_CS_PIN."
|
||||
#if TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0) && !PIN_EXISTS(TEMP_0_CS)
|
||||
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE E0 requires TEMP_0_CS_PIN."
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1) && !PIN_EXISTS(TEMP_1_CS)
|
||||
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE E1 requires TEMP_1_CS_PIN."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -2209,6 +2211,28 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE
|
||||
#if !PIN_EXISTS(TEMP_PROBE)
|
||||
#error "TEMP_SENSOR_PROBE requires TEMP_PROBE_PIN."
|
||||
#elif !HAS_TEMP_ADC_PROBE
|
||||
#error "TEMP_PROBE_PIN must be an ADC pin."
|
||||
#elif DISABLED(FIX_MOUNTED_PROBE)
|
||||
#error "TEMP_SENSOR_PROBE shouldn't be set without FIX_MOUNTED_PROBE."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BOARD
|
||||
#if !PIN_EXISTS(TEMP_BOARD)
|
||||
#error "TEMP_SENSOR_BOARD requires TEMP_BOARD_PIN."
|
||||
#elif !HAS_TEMP_ADC_BOARD
|
||||
#error "TEMP_BOARD_PIN must be an ADC pin."
|
||||
#elif ENABLED(THERMAL_PROTECTION_BOARD) && (!defined(BOARD_MINTEMP) || !defined(BOARD_MAXTEMP))
|
||||
#error "THERMAL_PROTECTION_BOARD requires BOARD_MINTEMP and BOARD_MAXTEMP."
|
||||
#endif
|
||||
#elif CONTROLLER_FAN_MIN_BOARD_TEMP
|
||||
#error "CONTROLLER_FAN_MIN_BOARD_TEMP requires TEMP_SENSOR_BOARD."
|
||||
#endif
|
||||
|
||||
#if ENABLED(LASER_COOLANT_FLOW_METER) && !(PIN_EXISTS(FLOWMETER) && ENABLED(LASER_FEATURE))
|
||||
#error "LASER_COOLANT_FLOW_METER requires FLOWMETER_PIN and LASER_FEATURE."
|
||||
#endif
|
||||
|
||||
@ -58,8 +58,8 @@
|
||||
#endif
|
||||
|
||||
// MAX TC related macros
|
||||
#define TEMP_SENSOR_IS_MAX(n, M) (ENABLED(TEMP_SENSOR_##n##_IS_MAX##M) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX##M) && TEMP_SENSOR_REDUNDANT_SOURCE == (n)))
|
||||
#define TEMP_SENSOR_IS_ANY_MAX_TC(n) (ENABLED(TEMP_SENSOR_##n##_IS_MAX_TC) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX_TC) && TEMP_SENSOR_REDUNDANT_SOURCE == n))
|
||||
#define TEMP_SENSOR_IS_MAX(n, M) (ENABLED(TEMP_SENSOR_##n##_IS_MAX##M) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX##M) && REDUNDANT_TEMP_MATCH(SOURCE, E##n)))
|
||||
#define TEMP_SENSOR_IS_ANY_MAX_TC(n) (ENABLED(TEMP_SENSOR_##n##_IS_MAX_TC) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX_TC) && REDUNDANT_TEMP_MATCH(SOURCE, E##n)))
|
||||
|
||||
// LIB_MAX6675 can be added to the build_flags in platformio.ini to use a user-defined library
|
||||
// If LIB_MAX6675 is not on the build_flags then raw SPI reads will be used.
|
||||
@ -262,7 +262,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_REDUNDANT
|
||||
redundant_temp_info_t Temperature::temp_redundant;
|
||||
redundant_info_t Temperature::temp_redundant;
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_POWER_E_FANS)
|
||||
@ -436,6 +436,14 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
|
||||
probe_info_t Temperature::temp_probe; // = { 0 }
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_BOARD
|
||||
board_info_t Temperature::temp_board; // = { 0 }
|
||||
#if ENABLED(THERMAL_PROTECTION_BOARD)
|
||||
int16_t Temperature::mintemp_raw_BOARD = TEMP_SENSOR_BOARD_RAW_LO_TEMP,
|
||||
Temperature::maxtemp_raw_BOARD = TEMP_SENSOR_COOLER_RAW_HI_TEMP;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(PREVENT_COLD_EXTRUSION)
|
||||
bool Temperature::allow_cold_extrude = false;
|
||||
celsius_t Temperature::extrude_min_temp = EXTRUDE_MINTEMP;
|
||||
@ -937,14 +945,26 @@ void Temperature::_temp_error(const heater_id_t heater_id, PGM_P const serial_ms
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ECHOPGM_P(serial_msg);
|
||||
SERIAL_ECHOPGM(STR_STOPPED_HEATER);
|
||||
if (heater_id >= 0)
|
||||
SERIAL_ECHO(heater_id);
|
||||
else if (TERN0(HAS_HEATED_CHAMBER, heater_id == H_CHAMBER))
|
||||
SERIAL_ECHOPGM(STR_HEATER_CHAMBER);
|
||||
else if (TERN0(HAS_COOLER, heater_id == H_COOLER))
|
||||
SERIAL_ECHOPGM(STR_COOLER);
|
||||
else
|
||||
SERIAL_ECHOPGM(STR_HEATER_BED);
|
||||
|
||||
heater_id_t real_heater_id = heater_id;
|
||||
|
||||
#if HAS_TEMP_REDUNDANT
|
||||
if (heater_id == H_REDUNDANT) {
|
||||
SERIAL_ECHOPGM(STR_REDUNDANT); // print redundant and cascade to print target, too.
|
||||
real_heater_id = (heater_id_t)TEMP_SENSOR_REDUNDANT_TARGET;
|
||||
}
|
||||
#endif
|
||||
|
||||
switch (real_heater_id) {
|
||||
OPTCODE(HAS_TEMP_COOLER, case H_COOLER: SERIAL_ECHOPGM(STR_COOLER); break)
|
||||
OPTCODE(HAS_TEMP_PROBE, case H_PROBE: SERIAL_ECHOPGM(STR_PROBE); break)
|
||||
OPTCODE(HAS_TEMP_BOARD, case H_BOARD: SERIAL_ECHOPGM(STR_MOTHERBOARD); break)
|
||||
OPTCODE(HAS_TEMP_CHAMBER, case H_CHAMBER: SERIAL_ECHOPGM(STR_HEATER_CHAMBER); break)
|
||||
OPTCODE(HAS_TEMP_BED, case H_BED: SERIAL_ECHOPGM(STR_HEATER_BED); break)
|
||||
default:
|
||||
if (real_heater_id >= 0)
|
||||
SERIAL_ECHOLNPAIR("E", real_heater_id);
|
||||
}
|
||||
SERIAL_EOL();
|
||||
}
|
||||
|
||||
@ -1663,6 +1683,9 @@ void Temperature::manage_heater() {
|
||||
#if TEMP_SENSOR_PROBE_IS_CUSTOM
|
||||
{ true, 0, 0, PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS, 0, 0, PROBE_BETA, 0 },
|
||||
#endif
|
||||
#if TEMP_SENSOR_BOARD_IS_CUSTOM
|
||||
{ true, 0, 0, BOARD_PULLUP_RESISTOR_OHMS, BOARD_RESISTANCE_25C_OHMS, 0, 0, BOARD_BETA, 0 },
|
||||
#endif
|
||||
#if TEMP_SENSOR_REDUNDANT_IS_CUSTOM
|
||||
{ true, 0, 0, REDUNDANT_PULLUP_RESISTOR_OHMS, REDUNDANT_RESISTANCE_25C_OHMS, 0, 0, REDUNDANT_BETA, 0 },
|
||||
#endif
|
||||
@ -1698,6 +1721,7 @@ void Temperature::manage_heater() {
|
||||
TERN_(TEMP_SENSOR_CHAMBER_IS_CUSTOM, t_index == CTI_CHAMBER ? PSTR("CHAMBER") :)
|
||||
TERN_(TEMP_SENSOR_COOLER_IS_CUSTOM, t_index == CTI_COOLER ? PSTR("COOLER") :)
|
||||
TERN_(TEMP_SENSOR_PROBE_IS_CUSTOM, t_index == CTI_PROBE ? PSTR("PROBE") :)
|
||||
TERN_(TEMP_SENSOR_BOARD_IS_CUSTOM, t_index == CTI_BOARD ? PSTR("BOARD") :)
|
||||
TERN_(TEMP_SENSOR_REDUNDANT_IS_CUSTOM, t_index == CTI_REDUNDANT ? PSTR("REDUNDANT") :)
|
||||
nullptr
|
||||
);
|
||||
@ -1933,14 +1957,32 @@ void Temperature::manage_heater() {
|
||||
}
|
||||
#endif // HAS_TEMP_PROBE
|
||||
|
||||
#if HAS_TEMP_BOARD
|
||||
// For motherboard temperature measurement.
|
||||
celsius_float_t Temperature::analog_to_celsius_board(const int16_t raw) {
|
||||
#if TEMP_SENSOR_BOARD_IS_CUSTOM
|
||||
return user_thermistor_to_deg_c(CTI_BOARD, raw);
|
||||
#elif TEMP_SENSOR_BOARD_IS_THERMISTOR
|
||||
SCAN_THERMISTOR_TABLE(TEMPTABLE_BOARD, TEMPTABLE_BOARD_LEN);
|
||||
#elif TEMP_SENSOR_BOARD_IS_AD595
|
||||
return TEMP_AD595(raw);
|
||||
#elif TEMP_SENSOR_BOARD_IS_AD8495
|
||||
return TEMP_AD8495(raw);
|
||||
#else
|
||||
UNUSED(raw);
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
#endif // HAS_TEMP_BOARD
|
||||
|
||||
#if HAS_TEMP_REDUNDANT
|
||||
// For redundant temperature measurement.
|
||||
celsius_float_t Temperature::analog_to_celsius_redundant(const int16_t raw) {
|
||||
#if TEMP_SENSOR_REDUNDANT_IS_CUSTOM
|
||||
return user_thermistor_to_deg_c(CTI_REDUNDANT, raw);
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0)
|
||||
return TERN(TEMP_SENSOR_REDUNDANT_IS_MAX31865, max31865_0.temperature((uint16_t)raw), raw * 0.25);
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
return TERN(TEMP_SENSOR_REDUNDANT_IS_MAX31865, max31865_1.temperature((uint16_t)raw), raw * 0.25);
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_THERMISTOR
|
||||
SCAN_THERMISTOR_TABLE(TEMPTABLE_REDUNDANT, TEMPTABLE_REDUNDANT_LEN);
|
||||
@ -1983,6 +2025,7 @@ void Temperature::updateTemperaturesFromRawValues() {
|
||||
TERN_(HAS_TEMP_CHAMBER, temp_chamber.celsius = analog_to_celsius_chamber(temp_chamber.raw));
|
||||
TERN_(HAS_TEMP_COOLER, temp_cooler.celsius = analog_to_celsius_cooler(temp_cooler.raw));
|
||||
TERN_(HAS_TEMP_PROBE, temp_probe.celsius = analog_to_celsius_probe(temp_probe.raw));
|
||||
TERN_(HAS_TEMP_BOARD, temp_board.celsius = analog_to_celsius_board(temp_board.raw));
|
||||
TERN_(HAS_TEMP_REDUNDANT, temp_redundant.celsius = analog_to_celsius_redundant(temp_redundant.raw));
|
||||
|
||||
TERN_(FILAMENT_WIDTH_SENSOR, filwidth.update_measured_mm());
|
||||
@ -2030,23 +2073,28 @@ void Temperature::updateTemperaturesFromRawValues() {
|
||||
|
||||
#endif // HAS_HOTEND
|
||||
|
||||
#define TP_CMP(S,A,B) (TEMPDIR(S) < 0 ? ((A)<(B)) : ((A)>(B)))
|
||||
#if ENABLED(THERMAL_PROTECTION_BED)
|
||||
#define BEDCMP(A,B) (TEMPDIR(BED) < 0 ? ((A)<(B)) : ((A)>(B)))
|
||||
if (BEDCMP(temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED);
|
||||
if (temp_bed.target > 0 && BEDCMP(mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED);
|
||||
if (TP_CMP(BED, temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED);
|
||||
if (temp_bed.target > 0 && TP_CMP(BED, mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED);
|
||||
#endif
|
||||
|
||||
#if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER)
|
||||
#define CHAMBERCMP(A,B) (TEMPDIR(CHAMBER) < 0 ? ((A)<(B)) : ((A)>(B)))
|
||||
if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER);
|
||||
if (temp_chamber.target > 0 && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER);
|
||||
if (TP_CMP(CHAMBER, temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER);
|
||||
if (temp_chamber.target > 0 && TP_CMP(CHAMBER, mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER);
|
||||
#endif
|
||||
|
||||
#if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER)
|
||||
#define COOLERCMP(A,B) (TEMPDIR(COOLER) < 0 ? ((A)<(B)) : ((A)>(B)))
|
||||
if (cutter.unitPower > 0 && COOLERCMP(temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER);
|
||||
if (COOLERCMP(mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER);
|
||||
if (cutter.unitPower > 0 && TP_CMP(COOLER, temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER);
|
||||
if (TP_CMP(COOLER, mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER);
|
||||
#endif
|
||||
|
||||
#if BOTH(HAS_TEMP_BOARD, THERMAL_PROTECTION_BOARD)
|
||||
if (TP_CMP(BOARD, temp_board.raw, maxtemp_raw_BOARD)) max_temp_error(H_BOARD);
|
||||
if (TP_CMP(BOARD, mintemp_raw_BOARD, temp_board.raw)) min_temp_error(H_BOARD);
|
||||
#endif
|
||||
#undef TP_CMP
|
||||
|
||||
} // Temperature::updateTemperaturesFromRawValues
|
||||
|
||||
/**
|
||||
@ -2275,6 +2323,9 @@ void Temperature::init() {
|
||||
#if HAS_TEMP_ADC_PROBE
|
||||
HAL_ANALOG_SELECT(TEMP_PROBE_PIN);
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_BOARD
|
||||
HAL_ANALOG_SELECT(TEMP_BOARD_PIN);
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_REDUNDANT
|
||||
HAL_ANALOG_SELECT(TEMP_REDUNDANT_PIN);
|
||||
#endif
|
||||
@ -2388,6 +2439,7 @@ void Temperature::init() {
|
||||
#endif
|
||||
#endif // HAS_HOTEND
|
||||
|
||||
// TODO: combine these into the macros above
|
||||
#if HAS_HEATED_BED
|
||||
while (analog_to_celsius_bed(mintemp_raw_BED) < BED_MINTEMP) mintemp_raw_BED += TEMPDIR(BED) * (OVERSAMPLENR);
|
||||
while (analog_to_celsius_bed(maxtemp_raw_BED) > BED_MAXTEMP) maxtemp_raw_BED -= TEMPDIR(BED) * (OVERSAMPLENR);
|
||||
@ -2403,15 +2455,22 @@ void Temperature::init() {
|
||||
while (analog_to_celsius_cooler(maxtemp_raw_COOLER) < COOLER_MAXTEMP) maxtemp_raw_COOLER -= TEMPDIR(COOLER) * (OVERSAMPLENR);
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_BOARD
|
||||
while (analog_to_celsius_board(mintemp_raw_BOARD) > BOARD_MINTEMP) mintemp_raw_BOARD += TEMPDIR(BOARD) * (OVERSAMPLENR);
|
||||
while (analog_to_celsius_board(maxtemp_raw_BOARD) < BOARD_MAXTEMP) maxtemp_raw_BOARD -= TEMPDIR(BOARD) * (OVERSAMPLENR);
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_REDUNDANT
|
||||
temp_redundant.target = &(
|
||||
#if TEMP_SENSOR_REDUNDANT_TARGET == -5 && HAS_TEMP_COOLER
|
||||
#if REDUNDANT_TEMP_MATCH(TARGET, COOLER) && HAS_TEMP_COOLER
|
||||
temp_cooler
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -4 && HAS_TEMP_PROBE
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, PROBE) && HAS_TEMP_PROBE
|
||||
temp_probe
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -2 && HAS_TEMP_CHAMBER
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, BOARD) && HAS_TEMP_BOARD
|
||||
temp_board
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, CHAMBER) && HAS_TEMP_CHAMBER
|
||||
temp_chamber
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -1 && HAS_TEMP_BED
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, BED) && HAS_TEMP_BED
|
||||
temp_bed
|
||||
#else
|
||||
temp_hotend[TEMP_SENSOR_REDUNDANT_TARGET]
|
||||
@ -2787,6 +2846,7 @@ void Temperature::disable_all_heaters() {
|
||||
*/
|
||||
void Temperature::update_raw_temperatures() {
|
||||
|
||||
// TODO: can this be collapsed into a HOTEND_LOOP()?
|
||||
#if HAS_TEMP_ADC_0 && !TEMP_SENSOR_0_IS_MAX_TC
|
||||
temp_hotend[0].update();
|
||||
#endif
|
||||
@ -2808,6 +2868,7 @@ void Temperature::update_raw_temperatures() {
|
||||
TERN_(HAS_TEMP_ADC_BED, temp_bed.update());
|
||||
TERN_(HAS_TEMP_ADC_CHAMBER, temp_chamber.update());
|
||||
TERN_(HAS_TEMP_ADC_PROBE, temp_probe.update());
|
||||
TERN_(HAS_TEMP_ADC_BOARD, temp_board.update());
|
||||
TERN_(HAS_TEMP_ADC_COOLER, temp_cooler.update());
|
||||
|
||||
TERN_(HAS_JOY_ADC_X, joystick.x.update());
|
||||
@ -2838,6 +2899,7 @@ void Temperature::readings_ready() {
|
||||
TERN_(HAS_TEMP_CHAMBER, temp_chamber.reset());
|
||||
TERN_(HAS_TEMP_PROBE, temp_probe.reset());
|
||||
TERN_(HAS_TEMP_COOLER, temp_cooler.reset());
|
||||
TERN_(HAS_TEMP_BOARD, temp_board.reset());
|
||||
TERN_(HAS_TEMP_REDUNDANT, temp_redundant.reset());
|
||||
|
||||
TERN_(HAS_JOY_ADC_X, joystick.x.reset());
|
||||
@ -3264,6 +3326,11 @@ void Temperature::isr() {
|
||||
case MeasureTemp_PROBE: ACCUMULATE_ADC(temp_probe); break;
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_ADC_BOARD
|
||||
case PrepareTemp_BOARD: HAL_START_ADC(TEMP_BOARD_PIN); break;
|
||||
case MeasureTemp_BOARD: ACCUMULATE_ADC(temp_board); break;
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_ADC_REDUNDANT
|
||||
case PrepareTemp_REDUNDANT: HAL_START_ADC(TEMP_REDUNDANT_PIN); break;
|
||||
case MeasureTemp_REDUNDANT: ACCUMULATE_ADC(temp_redundant); break;
|
||||
@ -3430,6 +3497,9 @@ void Temperature::isr() {
|
||||
#if HAS_TEMP_COOLER
|
||||
case H_COOLER: k = 'L'; break;
|
||||
#endif
|
||||
#if HAS_TEMP_BOARD
|
||||
case H_BOARD: k = 'M'; break;
|
||||
#endif
|
||||
#if HAS_TEMP_REDUNDANT
|
||||
case H_REDUNDANT: k = 'R'; break;
|
||||
#endif
|
||||
@ -3459,7 +3529,7 @@ void Temperature::isr() {
|
||||
OPTARG(HAS_TEMP_REDUNDANT, const bool include_r/*=false*/)
|
||||
) {
|
||||
#if HAS_TEMP_HOTEND
|
||||
print_heater_state(H_NONE, degHotend(target_extruder), degTargetHotend(target_extruder) OPTARG(SHOW_TEMP_ADC_VALUES, rawHotendTemp(target_extruder)));
|
||||
print_heater_state(H_E0, degHotend(target_extruder), degTargetHotend(target_extruder) OPTARG(SHOW_TEMP_ADC_VALUES, rawHotendTemp(target_extruder)));
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
print_heater_state(H_BED, degBed(), degTargetBed() OPTARG(SHOW_TEMP_ADC_VALUES, rawBedTemp()));
|
||||
@ -3471,7 +3541,10 @@ void Temperature::isr() {
|
||||
print_heater_state(H_COOLER, degCooler(), TERN0(HAS_COOLER, degTargetCooler()) OPTARG(SHOW_TEMP_ADC_VALUES, rawCoolerTemp()));
|
||||
#endif
|
||||
#if HAS_TEMP_PROBE
|
||||
print_heater_state(H_PROBE, degProbe(), 0 OPTARG(SHOW_TEMP_ADC_VALUES, rawProbeTemp()) );
|
||||
print_heater_state(H_PROBE, degProbe(), 0 OPTARG(SHOW_TEMP_ADC_VALUES, rawProbeTemp()));
|
||||
#endif
|
||||
#if HAS_TEMP_BOARD
|
||||
print_heater_state(H_BOARD, degBoard(), 0 OPTARG(SHOW_TEMP_ADC_VALUES, rawBoardTemp()));
|
||||
#endif
|
||||
#if HAS_TEMP_REDUNDANT
|
||||
if (include_r) print_heater_state(H_REDUNDANT, degRedundant(), degRedundantTarget() OPTARG(SHOW_TEMP_ADC_VALUES, rawRedundantTemp()));
|
||||
|
||||
@ -46,9 +46,13 @@
|
||||
|
||||
// Element identifiers. Positive values are hotends. Negative values are other heaters or coolers.
|
||||
typedef enum : int8_t {
|
||||
H_NONE = -6,
|
||||
H_COOLER, H_PROBE, H_REDUNDANT, H_CHAMBER, H_BED,
|
||||
H_E0, H_E1, H_E2, H_E3, H_E4, H_E5, H_E6, H_E7
|
||||
H_REDUNDANT = HID_REDUNDANT,
|
||||
H_COOLER = HID_COOLER,
|
||||
H_PROBE = HID_PROBE,
|
||||
H_BOARD = HID_BOARD,
|
||||
H_CHAMBER = HID_CHAMBER,
|
||||
H_BED = HID_BED,
|
||||
H_E0 = HID_E0, H_E1, H_E2, H_E3, H_E4, H_E5, H_E6, H_E7
|
||||
} heater_id_t;
|
||||
|
||||
// PID storage
|
||||
@ -105,6 +109,9 @@ enum ADCSensorState : char {
|
||||
#if HAS_TEMP_ADC_PROBE
|
||||
PrepareTemp_PROBE, MeasureTemp_PROBE,
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_BOARD
|
||||
PrepareTemp_BOARD, MeasureTemp_BOARD,
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_REDUNDANT
|
||||
PrepareTemp_REDUNDANT, MeasureTemp_REDUNDANT,
|
||||
#endif
|
||||
@ -192,7 +199,7 @@ typedef struct TempInfo {
|
||||
// A redundant temperature sensor
|
||||
typedef struct RedundantTempInfo : public TempInfo {
|
||||
temp_info_t* target;
|
||||
} redundant_temp_info_t;
|
||||
} redundant_info_t;
|
||||
#endif
|
||||
|
||||
// A PWM heater with temperature sensor
|
||||
@ -231,6 +238,9 @@ struct PIDHeaterInfo : public HeaterInfo {
|
||||
#elif HAS_TEMP_CHAMBER
|
||||
typedef temp_info_t chamber_info_t;
|
||||
#endif
|
||||
#if HAS_TEMP_BOARD
|
||||
typedef temp_info_t board_info_t;
|
||||
#endif
|
||||
#if EITHER(HAS_COOLER, HAS_TEMP_COOLER)
|
||||
typedef heater_info_t cooler_info_t;
|
||||
#endif
|
||||
@ -312,6 +322,9 @@ typedef struct { int16_t raw_min, raw_max; celsius_t mintemp, maxtemp; } temp_ra
|
||||
#if TEMP_SENSOR_COOLER_IS_CUSTOM
|
||||
CTI_COOLER,
|
||||
#endif
|
||||
#if TEMP_SENSOR_BOARD_IS_CUSTOM
|
||||
CTI_BOARD,
|
||||
#endif
|
||||
#if TEMP_SENSOR_REDUNDANT_IS_CUSTOM
|
||||
CTI_REDUNDANT,
|
||||
#endif
|
||||
@ -352,8 +365,11 @@ class Temperature {
|
||||
#if HAS_TEMP_COOLER
|
||||
static cooler_info_t temp_cooler;
|
||||
#endif
|
||||
#if HAS_TEMP_BOARD
|
||||
static board_info_t temp_board;
|
||||
#endif
|
||||
#if HAS_TEMP_REDUNDANT
|
||||
static redundant_temp_info_t temp_redundant;
|
||||
static redundant_info_t temp_redundant;
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_POWER_E_FANS)
|
||||
@ -478,6 +494,10 @@ class Temperature {
|
||||
static int16_t mintemp_raw_COOLER, maxtemp_raw_COOLER;
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_BOARD && ENABLED(THERMAL_PROTECTION_BOARD)
|
||||
static int16_t mintemp_raw_BOARD, maxtemp_raw_BOARD;
|
||||
#endif
|
||||
|
||||
#if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1
|
||||
static uint8_t consecutive_low_temperature_error[HOTENDS];
|
||||
#endif
|
||||
@ -551,6 +571,9 @@ class Temperature {
|
||||
#if HAS_TEMP_COOLER
|
||||
static celsius_float_t analog_to_celsius_cooler(const int16_t raw);
|
||||
#endif
|
||||
#if HAS_TEMP_BOARD
|
||||
static celsius_float_t analog_to_celsius_board(const int16_t raw);
|
||||
#endif
|
||||
#if HAS_TEMP_REDUNDANT
|
||||
static celsius_float_t analog_to_celsius_redundant(const int16_t raw);
|
||||
#endif
|
||||
@ -787,6 +810,14 @@ class Temperature {
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_BOARD
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
static inline int16_t rawBoardTemp() { return temp_board.raw; }
|
||||
#endif
|
||||
static inline celsius_float_t degBoard() { return temp_board.celsius; }
|
||||
static inline celsius_t wholeDegBoard() { return static_cast<celsius_t>(degBoard() + 0.5f); }
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_REDUNDANT
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
static inline int16_t rawRedundantTemp() { return temp_redundant.raw; }
|
||||
|
||||
@ -51,6 +51,7 @@
|
||||
|| TEMP_SENSOR_IS(n, CHAMBER) \
|
||||
|| TEMP_SENSOR_IS(n, COOLER) \
|
||||
|| TEMP_SENSOR_IS(n, PROBE) \
|
||||
|| TEMP_SENSOR_IS(n, BOARD) \
|
||||
|| TEMP_SENSOR_IS(n, REDUNDANT) )
|
||||
|
||||
typedef struct { int16_t value; celsius_t celsius; } temp_entry_t;
|
||||
@ -305,6 +306,13 @@ typedef struct { int16_t value; celsius_t celsius; } temp_entry_t;
|
||||
#define TEMPTABLE_PROBE_LEN 0
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BOARD > 0
|
||||
#define TEMPTABLE_BOARD TT_NAME(TEMP_SENSOR_BOARD)
|
||||
#define TEMPTABLE_BOARD_LEN COUNT(TEMPTABLE_BOARD)
|
||||
#else
|
||||
#define TEMPTABLE_BOARD_LEN 0
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT > 0
|
||||
#define TEMPTABLE_REDUNDANT TT_NAME(TEMP_SENSOR_REDUNDANT)
|
||||
#define TEMPTABLE_REDUNDANT_LEN COUNT(TEMPTABLE_REDUNDANT)
|
||||
@ -319,6 +327,7 @@ static_assert(255 > TEMPTABLE_0_LEN || 255 > TEMPTABLE_1_LEN || 255 > TEMPTABLE_
|
||||
|| 255 > TEMPTABLE_CHAMBER_LEN
|
||||
|| 255 > TEMPTABLE_COOLER_LEN
|
||||
|| 255 > TEMPTABLE_PROBE_LEN
|
||||
|| 255 > TEMPTABLE_BOARD_LEN
|
||||
|| 255 > TEMPTABLE_REDUNDANT_LEN
|
||||
, "Temperature conversion tables over 255 entries need special consideration."
|
||||
);
|
||||
@ -513,6 +522,15 @@ static_assert(255 > TEMPTABLE_0_LEN || 255 > TEMPTABLE_1_LEN || 255 > TEMPTABLE_
|
||||
#define TEMP_SENSOR_PROBE_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
|
||||
#endif
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_BOARD_RAW_HI_TEMP
|
||||
#if TT_REVRAW(BOARD)
|
||||
#define TEMP_SENSOR_BOARD_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
|
||||
#define TEMP_SENSOR_BOARD_RAW_LO_TEMP 0
|
||||
#else
|
||||
#define TEMP_SENSOR_BOARD_RAW_HI_TEMP 0
|
||||
#define TEMP_SENSOR_BOARD_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
|
||||
#endif
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_REDUNDANT_RAW_HI_TEMP
|
||||
#if TT_REVRAW(REDUNDANT)
|
||||
#define TEMP_SENSOR_REDUNDANT_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
|
||||
|
||||
@ -65,7 +65,7 @@
|
||||
#define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN
|
||||
#endif
|
||||
|
||||
#if HOTENDS == 1 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
|
||||
#if HOTENDS == 1 && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#if TEMP_SENSOR_PROBE
|
||||
#define TEMP_PROBE_PIN TEMP_1_PIN
|
||||
#elif TEMP_SENSOR_CHAMBER
|
||||
|
||||
@ -165,8 +165,8 @@
|
||||
//
|
||||
#define TEMP_0_PIN P0_24
|
||||
#define TEMP_1_PIN P0_23
|
||||
//#define TEMP_2_PIN P1_30 // Onboard thermistor
|
||||
#define TEMP_BED_PIN P0_25
|
||||
#define TEMP_BOARD_PIN P1_30 // Onboard thermistor, NTC100K
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
|
||||
@ -114,10 +114,11 @@
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 0 // Analog Input
|
||||
#define TEMP_1_PIN 1 // Analog Input
|
||||
#define TEMP_BED_PIN 2 // Analog Input
|
||||
#define TEMP_PROBE_PIN 3 // Analog Input
|
||||
#define TEMP_0_PIN 0 // Analog Input, Header J2
|
||||
#define TEMP_1_PIN 1 // Analog Input, Header J3
|
||||
#define TEMP_BOARD_PIN TEMP_1_PIN // Analog Input, Header J3
|
||||
#define TEMP_BED_PIN 2 // Analog Input, Header J6
|
||||
#define TEMP_PROBE_PIN 3 // Analog Input, Header J15
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
|
||||
@ -68,8 +68,8 @@
|
||||
//
|
||||
#define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor)
|
||||
#define TEMP_1_PIN 2 // Analog Input (unused)
|
||||
#define TEMP_2_PIN 5 // Analog Input (OnBoard thermistor beta 3950)
|
||||
#define TEMP_BED_PIN 1 // Analog Input (BED thermistor)
|
||||
#define TEMP_BOARD_PIN 5 // Analog Input (OnBoard thermistor beta 3950)
|
||||
|
||||
// SPI for MAX Thermocouple
|
||||
#if DISABLED(SDSUPPORT)
|
||||
|
||||
@ -161,6 +161,7 @@
|
||||
//
|
||||
#define TEMP_0_PIN PA2 // T0 <-> E0
|
||||
#define TEMP_1_PIN PA0 // T1 <-> E1
|
||||
#define TEMP_BOARD_PIN TEMP_1_PIN // Onboard sensor shared with T1
|
||||
#define TEMP_BED_PIN PA1 // T2 <-> Bed
|
||||
#define TEMP_PROBE_PIN PC3 // Shares J4 connector with PD1
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user