diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index 5cc22a7bbe9..983b8b6e75f 100644 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 25ccd7993ee..b0d2ae83c44 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index d06a29e84da..a522b0d5e00 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index fc354ed28fb..a17c2ca914f 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h index d8b21565c93..427689bb3ba 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1366,13 +1366,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 98f36de15b1..b6202e241d7 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 06269f9efb3..beadaf7893c 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 98f36de15b1..b6202e241d7 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index d6f17a8e0e3..cd736f03f21 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 0ece5f76afe..ace89cfdbf2 100644 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -1368,13 +1368,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index fdcbd485dde..aafc2475e5d 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index b7db7b8b207..fdbd8d091a8 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index 491aa299400..d3fdccff900 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1365,13 +1365,20 @@ //#define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index 508b074404a..e75ec2b37c3 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -1337,13 +1337,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index aa719934d53..36387ad02b4 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -1362,13 +1362,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index e8c5330c616..30c510a32ae 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index bd3317ad7d0..7ec38bf2e64 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1366,13 +1366,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index eb5e9ecdd40..fa61862fa29 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -1373,13 +1373,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index d0a3d8a60a6..3ba10ff69b8 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index 64a3f125ecc..14c87bd8215 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index 3c436971371..4807fddddbb 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -1354,13 +1354,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index 132d2c09be7..12df45c5f5f 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index 5695802cf52..aaa8e476498 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index 13692f53649..87bb07cff3a 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 02b4b43c787..6fa3e6eaa1f 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -1366,13 +1366,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 0af632b5c90..833148b56ac 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1367,13 +1367,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index d9dd3e2f48b..c63ae76443e 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1367,13 +1367,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 50eb752bc4b..723d55d5682 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1367,13 +1367,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index 50eb752bc4b..723d55d5682 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -1367,13 +1367,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index 50eb752bc4b..723d55d5682 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1367,13 +1367,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h index 5d6afd5057c..41cd46fa3e6 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h @@ -1372,13 +1372,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 53a0c1eee2f..6cb62bbb4cc 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1367,13 +1367,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 9a044934863..66df5462b6f 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index 1f84dfd86da..4c000c5d9c2 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index 3c8f5f0444d..2e5f65a37c7 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1365,13 +1365,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index 396fbeba0d8..127bfc702b2 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -1366,13 +1366,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all