💡 Adjust headers, formatting

Marlin/src/HAL/AVR/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/AVR/pinsDebug_plus_70.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -20,7 +20,6 @@
  *
  */
 
-
 /**
  * Based on u8g_com_msp430_hw_spi.c
  *

Marlin/src/HAL/DUE/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/ESP32/spi_pins.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/LINUX/main.cpp

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 //#define GPIO_LOGGING // Full GPIO and Positional Logging

Marlin/src/HAL/LINUX/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/LPC1768/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/NATIVE_SIM/pinsDebug.h

@@ -20,7 +20,6 @@
 /**
  * Support routines for X86_64
  */
-
 #pragma once
 
 /**

Marlin/src/HAL/SAMD51/QSPIFlash.h

@@ -25,7 +25,6 @@
  *
  * Derived from Adafruit_SPIFlash class with no SdFat references
  */
-
 #pragma once
 
 #include <Adafruit_SPIFlashBase.h>

Marlin/src/HAL/STM32/MarlinSPI.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #if defined(HAL_STM32) && !defined(STM32H7xx)

Marlin/src/HAL/STM32/MarlinSerial.cpp

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/MarlinSerial.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/eeprom_if_iic.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/eeprom_sdcard.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/fast_pwm.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/STM32/spi_pins.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/STM32/tft/tft_fsmc.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/tft/tft_spi.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/tft/xpt2046.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/usb_host.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/usb_serial.cpp

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32/usb_serial.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/STM32/watchdog.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __STM32F1__
 
 #include "../../../inc/MarlinConfig.h"

Marlin/src/HAL/STM32F1/eeprom_wired.cpp

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/STM32F1/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/STM32F1/spi_pins.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/TEENSY31_32/eeprom.cpp

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __MK20DX256__
 
 /**

Marlin/src/HAL/TEENSY35_36/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/TEENSY40_41/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/shared/Delay.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "Delay.h"
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfig.h"
 
 #if ENABLED(AUTO_BED_LEVELING_UBL)

Marlin/src/feature/cancel_object.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../inc/MarlinConfig.h"
 
 #if ENABLED(CANCEL_OBJECTS)

Marlin/src/feature/closedloop.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../inc/MarlinConfig.h"
 
 #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)

Marlin/src/feature/direct_stepping.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../inc/MarlinConfigPre.h"
 
 #if ENABLED(DIRECT_STEPPING)

Marlin/src/feature/repeat.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../inc/MarlinConfig.h"
 
 #if ENABLED(GCODE_REPEAT_MARKERS)

Marlin/src/gcode/calibrate/M12.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../inc/MarlinConfigPre.h"
 
 #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)

Marlin/src/gcode/config/M281.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../inc/MarlinConfig.h"
 
 #if ENABLED(EDITABLE_SERVO_ANGLES)

Marlin/src/gcode/feature/pause/G27.cpp

@@ -20,7 +20,6 @@
  *
  */
 
-
 #include "../../../inc/MarlinConfig.h"
 
 #if ENABLED(NOZZLE_PARK_FEATURE)

Marlin/src/gcode/gcode_d.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../inc/MarlinConfigPre.h"
 
 #if ENABLED(MARLIN_DEV_MODE)

Marlin/src/gcode/host/M360.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../inc/MarlinConfig.h"
 
 #if ENABLED(REPETIER_GCODE_M360)

Marlin/src/gcode/host/M876.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../inc/MarlinConfig.h"
 
 #if ENABLED(HOST_PROMPT_SUPPORT) && DISABLED(EMERGENCY_PARSER)

Marlin/src/gcode/lcd/M250.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../inc/MarlinConfig.h"
 
 #if HAS_LCD_CONTRAST

Marlin/src/gcode/motion/G6.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../inc/MarlinConfig.h"
 
 #if ENABLED(DIRECT_STEPPING)

Marlin/src/inc/SanityCheck.h

@@ -3279,10 +3279,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * Check per-axis initializers for errors
  */
-constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT,
-                sanity_arr_2[] = DEFAULT_MAX_FEEDRATE,
-                sanity_arr_3[] = DEFAULT_MAX_ACCELERATION,
-                sanity_arr_4[] = HOMING_FEEDRATE_MM_M;
 
 #define __PLUS_TEST(I,A) && (sanity_arr_##A[_MIN(I,signed(COUNT(sanity_arr_##A)-1))] > 0)
 #define _PLUS_TEST(A) (1 REPEAT2(14,__PLUS_TEST,A))
@@ -3292,18 +3288,22 @@ constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT,
   #define _EXTRA_NOTE " (Should be " STRINGIFY(LINEAR_AXES) "+" STRINGIFY(E_STEPPERS) ")"
 #endif
 
+constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT;
 static_assert(COUNT(sanity_arr_1) >= LOGICAL_AXES,  "DEFAULT_AXIS_STEPS_PER_UNIT requires " _LOGICAL_AXES_STR "elements.");
 static_assert(COUNT(sanity_arr_1) <= DISTINCT_AXES, "DEFAULT_AXIS_STEPS_PER_UNIT has too many elements." _EXTRA_NOTE);
 static_assert(_PLUS_TEST(1), "DEFAULT_AXIS_STEPS_PER_UNIT values must be positive.");
 
+constexpr float sanity_arr_2[] = DEFAULT_MAX_FEEDRATE;
 static_assert(COUNT(sanity_arr_2) >= LOGICAL_AXES,  "DEFAULT_MAX_FEEDRATE requires " _LOGICAL_AXES_STR "elements.");
 static_assert(COUNT(sanity_arr_2) <= DISTINCT_AXES, "DEFAULT_MAX_FEEDRATE has too many elements." _EXTRA_NOTE);
 static_assert(_PLUS_TEST(2), "DEFAULT_MAX_FEEDRATE values must be positive.");
 
+constexpr float sanity_arr_3[] = DEFAULT_MAX_ACCELERATION;
 static_assert(COUNT(sanity_arr_3) >= LOGICAL_AXES,  "DEFAULT_MAX_ACCELERATION requires " _LOGICAL_AXES_STR "elements.");
 static_assert(COUNT(sanity_arr_3) <= DISTINCT_AXES, "DEFAULT_MAX_ACCELERATION has too many elements." _EXTRA_NOTE);
 static_assert(_PLUS_TEST(3), "DEFAULT_MAX_ACCELERATION values must be positive.");
 
+constexpr float sanity_arr_4[] = HOMING_FEEDRATE_MM_M;
 static_assert(COUNT(sanity_arr_4) == LINEAR_AXES,  "HOMING_FEEDRATE_MM_M requires " _LINEAR_AXES_STR "elements (and no others).");
 static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive.");
 

Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp

@@ -1,3 +1,25 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
 /**
  * @file    lcdprint_hd44780.cpp
  * @brief   LCD print api for HD44780

Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include <U8glib-HAL.h>
 
 #if defined(__AVR__) && ENABLED(NOT_EXTENDED_ISO10646_1_5X7)

Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../inc/MarlinConfigPre.h"
 
 #if HAS_MARLINUI_U8GLIB

Marlin/src/lcd/extui/anycubic_chiron/chiron_tft_defs.h

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * lcd/extui/anycubic_chiron/chiron_defs.h
@@ -28,7 +29,6 @@
  *  (not affiliated with Anycubic, Ltd.)
  */
 
-#pragma once
 #include "../../../inc/MarlinConfigPre.h"
 //#define ACDEBUGLEVEL 4
 

Marlin/src/lcd/extui/dgus_reloaded/DGUSRxHandler.h

@@ -19,7 +19,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
-
 #pragma once
 
 #include "DGUSDisplay.h"

Marlin/src/lcd/extui/dgus_reloaded/DGUSScreenHandler.h

@@ -19,7 +19,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
-
 #pragma once
 
 #include "config/DGUS_Addr.h"

Marlin/src/lcd/extui/dgus_reloaded/DGUSSetupHandler.h

@@ -19,7 +19,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
-
 #pragma once
 
 namespace DGUSSetupHandler {

Marlin/src/lcd/extui/dgus_reloaded/DGUSTxHandler.h

@@ -19,7 +19,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
-
 #pragma once
 
 #include "DGUSDisplay.h"

Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_landscape.h

@@ -21,7 +21,6 @@
  * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
  * start of a new closed path.
  */
-
 #pragma once
 
 constexpr float x_min = 0.000000;

Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_portrait.h

@@ -21,7 +21,6 @@
  * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
  * start of a new closed path.
  */
-
 #pragma once
 
 constexpr float x_min = 0.000000;

Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/cocoa_press_ui.h

@@ -21,7 +21,6 @@
  * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
  * start of a new closed path.
  */
-
 #pragma once
 
 constexpr float x_min = 0.000000;

Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/custom_user_menus.h

@@ -19,7 +19,6 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #pragma once
 
 #define FTDI_CUSTOM_USER_MENUS

Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bootscreen_logo_portrait.h

@@ -20,7 +20,6 @@
  * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
  * start of a new closed path.
  */
-
 #pragma once
 
 constexpr float x_min = 0.000000, x_max = 272.000000,

Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_landscape.h

@@ -21,7 +21,6 @@
  * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
  * start of a new closed path.
  */
-
 #pragma once
 
 constexpr float x_min = 0.000000;

Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_portrait.h

@@ -21,7 +21,6 @@
  * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
  * start of a new closed path.
  */
-
 #pragma once
 
 constexpr float x_min = 0.000000;

Marlin/src/lcd/extui/mks_ui/draw_about.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_acceleration_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_advance_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_auto_level_offset_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if BOTH(HAS_TFT_LVGL_UI, HAS_BED_PROBE)

Marlin/src/lcd/extui/mks_ui/draw_baby_stepping.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_change_speed.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_cloud_bind.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE)

Marlin/src/lcd/extui/mks_ui/draw_eeprom_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_encoder_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_extrusion.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_fan.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_filament_change.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_filament_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_gcode.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_home.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_homing_sensitivity_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfig.h"
 
 #if HAS_TFT_LVGL_UI && USE_SENSORLESS

Marlin/src/lcd/extui/mks_ui/draw_jerk_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if BOTH(HAS_TFT_LVGL_UI, HAS_CLASSIC_JERK)

Marlin/src/lcd/extui/mks_ui/draw_keyboard.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_language.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_level_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_machine_para.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_machine_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_manuaLevel.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_max_feedrate_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_more.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_motor_settings.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_move_motor.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_number_key.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_operation.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_pause_message.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if BOTH(HAS_TFT_LVGL_UI, ADVANCED_PAUSE_FEATURE)

Marlin/src/lcd/extui/mks_ui/draw_pause_position.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_preHeat.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI

Marlin/src/lcd/extui/mks_ui/draw_printing.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_TFT_LVGL_UI