3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 12:04:19 +00:00
Code Issues Releases Wiki Activity

Fix broken EEPROM save/load

Browse Source
This commit is contained in:
Brian 2017-05-11 10:48:16 -04:00
parent f0fe26c411
commit 3370329751
3 changed files with 12 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Marlin/configuration_store.cpp
View File

@ -625,15 +625,18 @@ void MarlinSettings::postprocess() {
if (!eeprom_error) {
const int eeprom_size = eeprom_index;
const uint16_t tcrc = working_crc;
// Write the EEPROM header
eeprom_index = EEPROM_OFFSET;
EEPROM_WRITE(version);
EEPROM_WRITE(working_crc);
EEPROM_WRITE(tcrc);
// Report storage size
SERIAL_ECHO_START;
SERIAL_ECHOPAIR("Settings Stored (", eeprom_size - (EEPROM_OFFSET));
SERIAL_ECHOPAIR(" bytes; crc ", working_crc);
SERIAL_ECHOPAIR(" bytes; crc ", tcrc);
SERIAL_ECHOLNPGM(")");
}
@ -982,11 +985,11 @@ void MarlinSettings::postprocess() {
}
else {
SERIAL_ERROR_START;
SERIAL_ERRORPGM("EEPROM checksum mismatch - (stored CRC)");
SERIAL_ERRORPGM("EEPROM CRC mismatch - (stored) ");
SERIAL_ERROR(stored_crc);
SERIAL_ERRORPGM(" != ");
SERIAL_ERROR(working_crc);
SERIAL_ERRORLNPGM(" (calculated CRC)!");
SERIAL_ERRORLNPGM(" (calculated)!");
reset();
}
@ -1027,7 +1030,6 @@ void MarlinSettings::postprocess() {
return !eeprom_error;
}
#if ENABLED(AUTO_BED_LEVELING_UBL)
void ubl_invalid_slot(const int s) {
@ -1051,7 +1053,7 @@ void MarlinSettings::postprocess() {
if (!WITHIN(slot, 0, a - 1)) {
ubl_invalid_slot(a);
SERIAL_PROTOCOLPAIR("E2END=", E2END);
SERIAL_PROTOCOLPAIR(" meshes_end=", (int)meshes_end);
SERIAL_PROTOCOLPAIR(" meshes_end=", meshes_end);
SERIAL_PROTOCOLLNPAIR(" slot=", slot);
SERIAL_EOL;
return;

4
Marlin/configuration_store.h
View File

@ -67,8 +67,8 @@ class MarlinSettings {
#if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
// That can store is enabled
static int meshes_begin;
const static int mat_end = E2END; // Mesh allocation table; this may not end up being necessary
const static int meshes_end = mat_end - 128; // 128 is a placeholder for the size of the MAT
const static int meshes_end = E2END - 128; // 128 is a placeholder for the size of the MAT; the MAT will always
// live at the very end of the eeprom
#endif

4
Marlin/utility.cpp
View File

@ -37,8 +37,8 @@ void safe_delay(millis_t ms) {
#if ENABLED(EEPROM_SETTINGS)
void crc16(uint16_t *crc, const void * const data, uint16_t cnt) {
uint8_t *ptr = (uint8_t*)data;
while (cnt-- > 0) {
uint8_t *ptr = (uint8_t *)data;
while (cnt--) {
*crc = (uint16_t)(*crc ^ (uint16_t)(((uint16_t)*ptr++) << 8));
for (uint8_t x = 0; x < 8; x++)
*crc = (uint16_t)((*crc & 0x8000) ? ((uint16_t)(*crc << 1) ^ 0x1021) : (*crc << 1));