From 369ffe518d0b90bd9caa457a710014710b5046db Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 3 Mar 2021 00:15:56 -0600 Subject: [PATCH] Improve opt_set (etc.) used for tests --- buildroot/bin/opt_enable | 4 +- buildroot/bin/opt_set | 14 ++-- buildroot/bin/pins_set | 2 +- buildroot/tests/ARMED-tests | 3 +- buildroot/tests/BIGTREE_BTT002-tests | 8 +- buildroot/tests/BIGTREE_GTR_V1_0-tests | 58 ++++---------- .../BIGTREE_GTR_V1_0_usb_flash_drive-tests | 45 +++-------- buildroot/tests/BIGTREE_SKR_PRO-tests | 25 ++---- buildroot/tests/DUE-tests | 27 +++---- buildroot/tests/FLYF407ZG-tests | 5 +- buildroot/tests/FYSETC_F6-tests | 41 ++++------ buildroot/tests/FYSETC_S6-tests | 3 +- buildroot/tests/LERDGEX-tests | 3 +- buildroot/tests/LPC1768-tests | 23 +++--- buildroot/tests/LPC1769-tests | 18 ++--- buildroot/tests/NUCLEO_F767ZI-tests | 5 +- buildroot/tests/SAMD51_grandcentral_m4-tests | 22 ++---- buildroot/tests/STM32F070CB_malyan-tests | 3 +- buildroot/tests/STM32F103RC_btt-tests | 9 +-- buildroot/tests/STM32F103RC_btt_USB-tests | 4 +- buildroot/tests/STM32F103RC_meeb-tests | 9 +-- buildroot/tests/STM32F103RE-tests | 4 +- buildroot/tests/STM32F103RET6_creality-tests | 7 +- buildroot/tests/STM32F103RE_btt-tests | 10 +-- buildroot/tests/STM32F103RE_btt_USB-tests | 9 +-- buildroot/tests/STM32F401VE_STEVAL-tests | 3 +- buildroot/tests/esp32-tests | 23 ++---- buildroot/tests/linux_native-tests | 3 +- buildroot/tests/mega1280-tests | 16 ++-- buildroot/tests/mega2560-tests | 77 +++++-------------- buildroot/tests/mks_robin_lite-tests | 6 +- buildroot/tests/mks_robin_mini-tests | 4 +- buildroot/tests/mks_robin_nano35-tests | 4 +- buildroot/tests/mks_robin_nano35_stm32-tests | 4 +- buildroot/tests/mks_robin_pro-tests | 12 ++- buildroot/tests/rambo-tests | 71 +++++++---------- buildroot/tests/rumba32-tests | 18 ++--- buildroot/tests/sanguino1284p-tests | 6 +- buildroot/tests/teensy31-tests | 9 +-- buildroot/tests/teensy35-tests | 45 ++++------- buildroot/tests/teensy41-tests | 42 ++++------ 41 files changed, 229 insertions(+), 475 deletions(-) diff --git a/buildroot/bin/opt_enable b/buildroot/bin/opt_enable index 96686d6c68..fdcb5dae2d 100755 --- a/buildroot/bin/opt_enable +++ b/buildroot/bin/opt_enable @@ -7,7 +7,7 @@ SED=$(which gsed || which sed) for opt in "$@" ; do # Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648 - eval "${SED} -i '/\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" || - eval "${SED} -i '/\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" || + eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" || + eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" || (echo "ERROR: opt_enable Can't find ${opt}" >&2 && exit 9) done diff --git a/buildroot/bin/opt_set b/buildroot/bin/opt_set index a646e09ae7..2a7a676cdc 100755 --- a/buildroot/bin/opt_set +++ b/buildroot/bin/opt_set @@ -5,8 +5,12 @@ set -e SED=$(which gsed || which sed) -# Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648 -eval "${SED} -i '/\(\/\/\)*\([[:blank:]]*\)\(#define\s\+\b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" || -eval "${SED} -i '/\(\/\/\)*\([[:blank:]]*\)\(#define\s\+\b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" || -eval "echo '#define ${@}' >>Marlin/Configuration_adv.h" || -(echo "ERROR: opt_set Can't set or add ${1}" >&2 && exit 9) +ARGC=$# +while [[ $# > 1 ]]; do + # Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648 + eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*\([[:blank:]]*\)\(#define\s\+\b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" || + eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*\([[:blank:]]*\)\(#define\s\+\b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" || + eval "echo '#define ${1} ${2}' >>Marlin/Configuration.h" || + (echo "ERROR: opt_set Can't set or add ${1}" >&2 && exit 9) + shift 2 +done diff --git a/buildroot/bin/pins_set b/buildroot/bin/pins_set index 87a8692aa2..860c64940f 100755 --- a/buildroot/bin/pins_set +++ b/buildroot/bin/pins_set @@ -7,5 +7,5 @@ PIN=$2 VAL=$3 SED=$(which gsed || which sed) -eval "${SED} -i '/\(\/\/\)*\(#define \+${PIN}\b\).*$/{s//\2 ${VAL}/;h};\${x;/./{x;q0};x;q9}' Marlin/src/pins/$DIR/pins_${NAM}.h" || +eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*[[:blank:]]*\(#define \+${PIN}\b\).*$/{s//\2 ${VAL}/;h};\${x;/./{x;q0};x;q9}' Marlin/src/pins/$DIR/pins_${NAM}.h" || (echo "ERROR: pins_set Can't find ${PIN}" >&2 && exit 9) diff --git a/buildroot/tests/ARMED-tests b/buildroot/tests/ARMED-tests index 6aa1308ca4..8764d47e84 100755 --- a/buildroot/tests/ARMED-tests +++ b/buildroot/tests/ARMED-tests @@ -11,8 +11,7 @@ set -e # restore_configs use_example_configs ArmEd -opt_set X_DRIVER_TYPE TMC2130 -opt_set Y_DRIVER_TYPE TMC2208 +opt_set X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208 exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers" "$3" # clean up diff --git a/buildroot/tests/BIGTREE_BTT002-tests b/buildroot/tests/BIGTREE_BTT002-tests index 90e033e969..ba13e3eafd 100755 --- a/buildroot/tests/BIGTREE_BTT002-tests +++ b/buildroot/tests/BIGTREE_BTT002-tests @@ -10,10 +10,10 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_BTT_BTT002_V1_0 -opt_set SERIAL_PORT 1 -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2130 +opt_set MOTHERBOARD BOARD_BTT_BTT002_V1_0 \ + SERIAL_PORT 1 \ + X_DRIVER_TYPE TMC2209 \ + Y_DRIVER_TYPE TMC2130 exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers" "$3" # clean up diff --git a/buildroot/tests/BIGTREE_GTR_V1_0-tests b/buildroot/tests/BIGTREE_GTR_V1_0-tests index adc850db03..95a1e0acac 100755 --- a/buildroot/tests/BIGTREE_GTR_V1_0-tests +++ b/buildroot/tests/BIGTREE_GTR_V1_0-tests @@ -7,54 +7,24 @@ set -e restore_configs -opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 -opt_set SERIAL_PORT -1 -opt_set EXTRUDERS 8 -opt_set TEMP_SENSOR_1 1 -opt_set TEMP_SENSOR_2 1 -opt_set TEMP_SENSOR_3 1 -opt_set TEMP_SENSOR_4 1 -opt_set TEMP_SENSOR_5 1 -opt_set TEMP_SENSOR_6 1 -opt_set TEMP_SENSOR_7 1 +opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \ + EXTRUDERS 8 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 TEMP_SENSOR_6 1 TEMP_SENSOR_7 1 # Not necessary to enable auto-fan for all extruders to hit problematic code paths -opt_set E0_AUTO_FAN_PIN PC10 -opt_set E1_AUTO_FAN_PIN PC11 -opt_set E2_AUTO_FAN_PIN PC12 -opt_set X_DRIVER_TYPE TMC2208 -opt_set Y_DRIVER_TYPE TMC2130 -opt_set NEOPIXEL_PIN PF13 -opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING -opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE -opt_set FIL_RUNOUT_PIN 3 -opt_set FIL_RUNOUT2_PIN 4 -opt_set FIL_RUNOUT3_PIN 5 -opt_set FIL_RUNOUT4_PIN 6 -opt_set FIL_RUNOUT5_PIN 7 -opt_set FIL_RUNOUT6_PIN 8 -opt_set FIL_RUNOUT7_PIN 9 -opt_set FIL_RUNOUT8_PIN 10 -opt_set FIL_RUNOUT4_STATE HIGH -opt_enable FIL_RUNOUT4_PULLUP -opt_set FIL_RUNOUT8_STATE HIGH -opt_enable FIL_RUNOUT8_PULLUP -exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3" +opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_PIN PF13 \ + X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130 \ + FIL_RUNOUT_PIN 3 FIL_RUNOUT2_PIN 4 FIL_RUNOUT3_PIN 5 FIL_RUNOUT4_PIN 6 FIL_RUNOUT5_PIN 7 FIL_RUNOUT6_PIN 8 FIL_RUNOUT7_PIN 9 FIL_RUNOUT8_PIN 10 \ + FIL_RUNOUT4_STATE HIGH FIL_RUNOUT8_STATE HIGH +opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE \ + FILAMENT_RUNOUT_SENSOR FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP +exec_test $1 $2 "BigTreeTech GTR | 8 Extruders | Auto-Fan | Mixed TMC Drivers | Runout Sensors w/ distinct states" "$3" restore_configs -opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 -opt_set SERIAL_PORT -1 -opt_set EXTRUDERS 6 -opt_set TEMP_SENSOR_1 1 -opt_set TEMP_SENSOR_2 1 -opt_set TEMP_SENSOR_3 1 -opt_set TEMP_SENSOR_4 1 -opt_set TEMP_SENSOR_5 1 -opt_set NUM_Z_STEPPER_DRIVERS 3 -opt_set DEFAULT_Kp_LIST "{ 22.2, 20.0, 21.0, 19.0, 18.0, 17.0 }" -opt_set DEFAULT_Ki_LIST "{ 1.08 }" -opt_set DEFAULT_Kd_LIST "{ 114.0, 112.0, 110.0, 108.0 }" +opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \ + EXTRUDERS 6 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 \ + NUM_Z_STEPPER_DRIVERS 3 \ + DEFAULT_Kp_LIST '{ 22.2, 20.0, 21.0, 19.0, 18.0, 17.0 }' DEFAULT_Ki_LIST '{ 1.08 }' DEFAULT_Kd_LIST '{ 114.0, 112.0, 110.0, 108.0 }' opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_INIT_BEFORE_SWAP TOOLCHANGE_FS_PRIME_FIRST_USED PID_PARAMS_PER_HOTEND -exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z" "$3" +exec_test $1 $2 "BigTreeTech GTR | 6 Extruders | Triple Z" "$3" # clean up restore_configs diff --git a/buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive-tests b/buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive-tests index 0504fc1da9..197ece5dfd 100755 --- a/buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive-tests +++ b/buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive-tests @@ -7,41 +7,18 @@ set -e restore_configs -opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 -opt_set SERIAL_PORT 3 -opt_set EXTRUDERS 8 -opt_set TEMP_SENSOR_1 1 -opt_set TEMP_SENSOR_2 1 -opt_set TEMP_SENSOR_3 1 -opt_set TEMP_SENSOR_4 1 -opt_set TEMP_SENSOR_5 1 -opt_set TEMP_SENSOR_6 1 -opt_set TEMP_SENSOR_7 1 -opt_set SDSUPPORT -opt_set USB_FLASH_DRIVE_SUPPORT -opt_set USE_OTG_USB_HOST +opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT 3 \ + EXTRUDERS 8 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 TEMP_SENSOR_6 1 TEMP_SENSOR_7 1 +opt_enable SDSUPPORT USB_FLASH_DRIVE_SUPPORT USE_OTG_USB_HOST \ + REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING \ + FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE # Not necessary to enable auto-fan for all extruders to hit problematic code paths -opt_set E0_AUTO_FAN_PIN PC10 -opt_set E1_AUTO_FAN_PIN PC11 -opt_set E2_AUTO_FAN_PIN PC12 -opt_set X_DRIVER_TYPE TMC2208 -opt_set Y_DRIVER_TYPE TMC2130 -opt_set NEOPIXEL_PIN PF13 -opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING -opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE -opt_set FIL_RUNOUT_PIN 3 -opt_set FIL_RUNOUT2_PIN 4 -opt_set FIL_RUNOUT3_PIN 5 -opt_set FIL_RUNOUT4_PIN 6 -opt_set FIL_RUNOUT5_PIN 7 -opt_set FIL_RUNOUT6_PIN 8 -opt_set FIL_RUNOUT7_PIN 9 -opt_set FIL_RUNOUT8_PIN 10 -opt_set FIL_RUNOUT4_STATE HIGH -opt_enable FIL_RUNOUT4_PULLUP -opt_set FIL_RUNOUT8_STATE HIGH -opt_enable FIL_RUNOUT8_PULLUP -exec_test $1 $2 "BigTreeTech GTR + OTG USB Flash Drive + Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3" +opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_PIN PF13 \ + X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130 \ + FIL_RUNOUT_PIN 3 FIL_RUNOUT2_PIN 4 FIL_RUNOUT3_PIN 5 FIL_RUNOUT4_PIN 6 FIL_RUNOUT5_PIN 7 FIL_RUNOUT6_PIN 8 FIL_RUNOUT7_PIN 9 FIL_RUNOUT8_PIN 10 \ + FIL_RUNOUT4_STATE HIGH FIL_RUNOUT8_STATE HIGH +opt_enable FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP +exec_test $1 $2 "GTT GTR | OTG USB Flash Drive | 8 Extruders | Auto-Fan | Mixed TMC Drivers | Runout Sensors (distinct)" "$3" # clean up restore_configs diff --git a/buildroot/tests/BIGTREE_SKR_PRO-tests b/buildroot/tests/BIGTREE_SKR_PRO-tests index 8dc433deb2..74020c1b27 100755 --- a/buildroot/tests/BIGTREE_SKR_PRO-tests +++ b/buildroot/tests/BIGTREE_SKR_PRO-tests @@ -10,31 +10,22 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 -opt_set SERIAL_PORT 1 +opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT 1 exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration" "$3" restore_configs -opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 -opt_set SERIAL_PORT -1 -opt_set EXTRUDERS 3 -opt_set TEMP_SENSOR_1 1 -opt_set TEMP_SENSOR_2 1 -opt_set E0_AUTO_FAN_PIN PC10 -opt_set E1_AUTO_FAN_PIN PC11 -opt_set E2_AUTO_FAN_PIN PC12 -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2130 +opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \ + EXTRUDERS 3 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 \ + E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 \ + X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130 opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING PINS_DEBUGGING exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers" "$3" restore_configs -opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 -opt_set SERIAL_PORT -1 +opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \ + CUTTER_POWER_UNIT PERCENT \ + SPINDLE_LASER_PWM_PIN HEATER_1_PIN SPINDLE_LASER_ENA_PIN HEATER_2_PIN opt_enable LASER_FEATURE REPRAP_DISCOUNT_SMART_CONTROLLER -opt_set CUTTER_POWER_UNIT PERCENT -opt_add SPINDLE_LASER_PWM_PIN HEATER_1_PIN -opt_add SPINDLE_LASER_ENA_PIN HEATER_2_PIN exec_test $1 $2 "Laser, LCD, PERCENT power unit" "$3" # clean up diff --git a/buildroot/tests/DUE-tests b/buildroot/tests/DUE-tests index 1e22ba3370..d1601edf5a 100755 --- a/buildroot/tests/DUE-tests +++ b/buildroot/tests/DUE-tests @@ -7,12 +7,12 @@ set -e restore_configs -opt_set LCD_LANGUAGE bg -opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB -opt_set TEMP_SENSOR_0 -2 -opt_set TEMP_SENSOR_BED 2 -opt_set GRID_MAX_POINTS_X 16 -opt_set FANMUX0_PIN 53 +opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB \ + LCD_LANGUAGE bg \ + TEMP_SENSOR_0 -2 TEMP_SENSOR_BED 2 \ + GRID_MAX_POINTS_X 16 \ + E0_AUTO_FAN_PIN 8 FANMUX0_PIN 53 EXTRUDER_AUTO_FAN_SPEED 100 \ + TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 6 HEATER_CHAMBER_PIN 45 opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \ FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING \ ASSISTED_TRAMMING ASSISTED_TRAMMING_WIZARD REPORT_TRAMMING_MM ASSISTED_TRAMMING_WAIT_POSITION \ @@ -28,23 +28,17 @@ opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \ PIDTEMPBED SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER \ PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL \ EXTENSIBLE_UI -opt_add EXTUI_EXAMPLE -opt_set E0_AUTO_FAN_PIN 8 -opt_set EXTRUDER_AUTO_FAN_SPEED 100 -opt_set TEMP_SENSOR_CHAMBER 3 -opt_add TEMP_CHAMBER_PIN 6 -opt_set HEATER_CHAMBER_PIN 45 +opt_add EXTUI_EXAMPLE exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options." "$3" # # RADDS with BLTouch, ABL(B), 3 x Z auto-align # restore_configs -opt_set MOTHERBOARD BOARD_RADDS +opt_set MOTHERBOARD BOARD_RADDS NUM_Z_STEPPER_DRIVERS 3 opt_enable USE_XMAX_PLUG USE_YMAX_PLUG ENDSTOPPULLUPS BLTOUCH AUTO_BED_LEVELING_BILINEAR \ Z_STEPPER_AUTO_ALIGN Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS Z_SAFE_HOMING #TOUCH_UI_FTDI_EVE LCD_ALEPHOBJECTS_CLCD_UI OTHER_PIN_LAYOUT -opt_set NUM_Z_STEPPER_DRIVERS 3 pins_set ramps/RAMPS X_MAX_PIN -1 pins_set ramps/RAMPS Y_MAX_PIN -1 exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN" "$3" @@ -53,9 +47,6 @@ exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN" # Test SWITCHING_EXTRUDER # restore_configs -opt_set LCD_LANGUAGE fi -opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF -opt_set EXTRUDERS 2 -opt_set NUM_SERVOS 1 +opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF LCD_LANGUAGE fi EXTRUDERS 2 NUM_SERVOS 1 opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY" "$3" diff --git a/buildroot/tests/FLYF407ZG-tests b/buildroot/tests/FLYF407ZG-tests index 2c915eb48b..22dd3488c8 100755 --- a/buildroot/tests/FLYF407ZG-tests +++ b/buildroot/tests/FLYF407ZG-tests @@ -8,10 +8,7 @@ set -e # Build examples restore_configs -opt_set MOTHERBOARD BOARD_FLYF407ZG -opt_set SERIAL_PORT -1 -opt_set X_DRIVER_TYPE TMC2208 -opt_set Y_DRIVER_TYPE TMC2130 +opt_set MOTHERBOARD BOARD_FLYF407ZG SERIAL_PORT -1 X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130 exec_test $1 $2 "FLYF407ZG Default Config with mixed TMC Drivers" "$3" # cleanup diff --git a/buildroot/tests/FYSETC_F6-tests b/buildroot/tests/FYSETC_F6-tests index e1eb6684a5..3fe59d59a1 100755 --- a/buildroot/tests/FYSETC_F6-tests +++ b/buildroot/tests/FYSETC_F6-tests @@ -18,34 +18,24 @@ exec_test $1 $2 "FYSETC F6 1.3 with DGUS" "$3" # Delta Config (generic) + UBL + ALLEN_KEY + EEPROM_SETTINGS + OLED_PANEL_TINYBOY2 # use_example_configs delta/generic -opt_set MOTHERBOARD BOARD_FYSETC_F6_13 +opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \ + LCD_LANGUAGE ko_KR \ + X_DRIVER_TYPE L6470 Y_DRIVER_TYPE L6470 Z_DRIVER_TYPE L6470 \ + L6470_CHAIN_SCK_PIN 53 L6470_CHAIN_MISO_PIN 49 L6470_CHAIN_MOSI_PIN 40 L6470_CHAIN_SS_PIN 42 \ + 'ENABLE_RESET_L64XX_CHIPS(V)' NOOP opt_enable RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS EEPROM_CHITCHAT \ Z_PROBE_ALLEN_KEY AUTO_BED_LEVELING_UBL \ OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY DELTA_CALIBRATION_MENU -opt_set LCD_LANGUAGE ko_KR -opt_set X_DRIVER_TYPE L6470 -opt_set Y_DRIVER_TYPE L6470 -opt_set Z_DRIVER_TYPE L6470 -opt_add L6470_CHAIN_SCK_PIN 53 -opt_add L6470_CHAIN_MISO_PIN 49 -opt_add L6470_CHAIN_MOSI_PIN 40 -opt_add L6470_CHAIN_SS_PIN 42 -opt_add "ENABLE_RESET_L64XX_CHIPS(V) NOOP" exec_test $1 $2 "DELTA, RAMPS, L6470, UBL, Allen Key, EEPROM, OLED_PANEL_TINYBOY2..." "$3" # # Test mixed TMC config # restore_configs -opt_set MOTHERBOARD BOARD_FYSETC_F6_13 -opt_set LCD_LANGUAGE vi -opt_set LCD_LANGUAGE_2 fr -opt_set X_DRIVER_TYPE TMC2160 -opt_set Y_DRIVER_TYPE TMC5160 -opt_set Z_DRIVER_TYPE TMC2208_STANDALONE -opt_set E0_DRIVER_TYPE TMC2130 -opt_set X_MIN_ENDSTOP_INVERTING true -opt_set Y_MIN_ENDSTOP_INVERTING true +opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \ + LCD_LANGUAGE vi LCD_LANGUAGE_2 fr \ + X_DRIVER_TYPE TMC2160 Y_DRIVER_TYPE TMC5160 Z_DRIVER_TYPE TMC2208_STANDALONE E0_DRIVER_TYPE TMC2130 \ + X_MIN_ENDSTOP_INVERTING true Y_MIN_ENDSTOP_INVERTING true opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \ MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \ MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \ @@ -63,17 +53,14 @@ exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config" "$3" # SCARA with Mixed TMC # use_example_configs SCARA/Morgan -opt_set MOTHERBOARD BOARD_FYSETC_F6_13 -opt_set LCD_LANGUAGE es +opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \ + LCD_LANGUAGE es \ + X_MAX_ENDSTOP_INVERTING false \ + X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130_STANDALONE E0_DRIVER_TYPE TMC2660 \ + X_HARDWARE_SERIAL Serial2 opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \ FYSETC_242_OLED_12864 EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL Z_SAFE_HOMING \ STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD SENSORLESS_HOMING SQUARE_WAVE_STEPPING -opt_set X_MAX_ENDSTOP_INVERTING false -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2130 -opt_set Z_DRIVER_TYPE TMC2130_STANDALONE -opt_set E0_DRIVER_TYPE TMC2660 -opt_add X_HARDWARE_SERIAL Serial2 exec_test $1 $2 "FYSETC_F6 | SCARA | Mixed TMC | EEPROM" "$3" # clean up diff --git a/buildroot/tests/FYSETC_S6-tests b/buildroot/tests/FYSETC_S6-tests index c7f7a16bbd..ce5442c376 100755 --- a/buildroot/tests/FYSETC_S6-tests +++ b/buildroot/tests/FYSETC_S6-tests @@ -10,8 +10,7 @@ set -e restore_configs use_example_configs FYSETC/S6 opt_enable MEATPACK -opt_set Y_DRIVER_TYPE TMC2209 -opt_set Z_DRIVER_TYPE TMC2130 +opt_set Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2130 exec_test $1 $2 "FYSETC S6 Example" "$3" # cleanup diff --git a/buildroot/tests/LERDGEX-tests b/buildroot/tests/LERDGEX-tests index 7fcdb2684f..cf7dfebfea 100755 --- a/buildroot/tests/LERDGEX-tests +++ b/buildroot/tests/LERDGEX-tests @@ -10,8 +10,7 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_LERDGE_X -opt_set SERIAL_PORT 1 +opt_set MOTHERBOARD BOARD_LERDGE_X SERIAL_PORT 1 exec_test $1 $2 "LERDGE X with Default Configuration" "$3" # clean up diff --git a/buildroot/tests/LPC1768-tests b/buildroot/tests/LPC1768-tests index 27d2fbf3ff..a6829e85ea 100755 --- a/buildroot/tests/LPC1768-tests +++ b/buildroot/tests/LPC1768-tests @@ -14,9 +14,8 @@ set -e #exec_test $1 $2 "Default Configuration" "$3" restore_configs -opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB +opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB NEOPIXEL_PIN P1_16 opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED -opt_set NEOPIXEL_PIN P1_16 exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" "$3" #restore_configs @@ -24,19 +23,18 @@ exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), N #exec_test $1 $2 "MKS SBASE Example Config" "$3" restore_configs -opt_set MOTHERBOARD BOARD_MKS_SBASE -opt_set EXTRUDERS 2 -opt_set TEMP_SENSOR_1 1 -opt_set NUM_SERVOS 2 -opt_set SERVO_DELAY "{ 300, 300 }" +opt_set MOTHERBOARD BOARD_MKS_SBASE \ + EXTRUDERS 2 TEMP_SENSOR_1 1 \ + NUM_SERVOS 2 SERVO_DELAY '{ 300, 300 }' opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE" "$3" restore_configs -opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB -opt_set EXTRUDERS 2 -opt_set TEMP_SENSOR_1 -1 -opt_set TEMP_SENSOR_BED 5 +opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB \ + EXTRUDERS 2 TEMP_SENSOR_1 -1 TEMP_SENSOR_BED 5 \ + GRID_MAX_POINTS_X 16 \ + NOZZLE_TO_PROBE_OFFSET '{ 0, 0, 0 }' \ + NOZZLE_CLEAN_MIN_TEMP 170 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \ FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING SOUND_MENU_ITEM \ NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR PREHEAT_BEFORE_LEVELING G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ @@ -46,9 +44,6 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO HOST_KEEPALIVE_FEATURE HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT \ LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \ SDSUPPORT SDCARD_SORT_ALPHA AUTO_REPORT_SD_STATUS EMERGENCY_PARSER -opt_set GRID_MAX_POINTS_X 16 -opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }" -opt_set NOZZLE_CLEAN_MIN_TEMP 170 exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3" # clean up diff --git a/buildroot/tests/LPC1769-tests b/buildroot/tests/LPC1769-tests index 0a61d42800..5ca7114543 100755 --- a/buildroot/tests/LPC1769-tests +++ b/buildroot/tests/LPC1769-tests @@ -13,17 +13,15 @@ use_example_configs Azteeg/X5GT exec_test $1 $2 "Azteeg X5GT Example Configuration" "$3" restore_configs -opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD -opt_set EXTRUDERS 2 -opt_set TEMP_SENSOR_1 -1 -opt_set TEMP_SENSOR_BED 5 +opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD \ + EXTRUDERS 2 TEMP_SENSOR_1 -1 TEMP_SENSOR_BED 5 \ + GRID_MAX_POINTS_X 16 opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \ FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET LEVEL_CORNERS_USE_PROBE LEVEL_CORNERS_VERIFY_RAISED \ PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \ Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \ LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER -opt_set GRID_MAX_POINTS_X 16 exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI and many features" "$3" #restore_configs @@ -36,17 +34,13 @@ exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI and many features" "$3" # SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS \ # VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS \ # EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA -#opt_set FAN_MIN_PWM 50 -#opt_set FAN_KICKSTART_TIME 100 -#opt_set XY_FREQUENCY_LIMIT 15 +#opt_set FAN_MIN_PWM 50 FAN_KICKSTART_TIME 100 XY_FREQUENCY_LIMIT 15 #exec_test $1 $2 "Azteeg X5 MINI WIFI Many less common options" "$3" restore_configs use_example_configs delta/generic -opt_set MOTHERBOARD BOARD_COHESION3D_REMIX -opt_set X_DRIVER_TYPE TMC2130 -opt_set Y_DRIVER_TYPE TMC2130 -opt_set Z_DRIVER_TYPE TMC2130 +opt_set MOTHERBOARD BOARD_COHESION3D_REMIX \ + X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130 opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT MECHANICAL_GANTRY_CALIBRATION \ TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD \ SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \ diff --git a/buildroot/tests/NUCLEO_F767ZI-tests b/buildroot/tests/NUCLEO_F767ZI-tests index bd5ca86970..9e23246606 100755 --- a/buildroot/tests/NUCLEO_F767ZI-tests +++ b/buildroot/tests/NUCLEO_F767ZI-tests @@ -10,11 +10,8 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_NUCLEO_F767ZI -opt_set SERIAL_PORT -1 +opt_set MOTHERBOARD BOARD_NUCLEO_F767ZI SERIAL_PORT -1 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2208 opt_enable BLTOUCH Z_SAFE_HOMING SPEAKER SOFTWARE_DRIVER_ENABLE -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2208 exec_test $1 $2 "Mixed timer usage" "$3" # clean up diff --git a/buildroot/tests/SAMD51_grandcentral_m4-tests b/buildroot/tests/SAMD51_grandcentral_m4-tests index a98929520e..92a62c9d37 100755 --- a/buildroot/tests/SAMD51_grandcentral_m4-tests +++ b/buildroot/tests/SAMD51_grandcentral_m4-tests @@ -10,20 +10,14 @@ set -e # Build with the default configurations # restore_configs -opt_set SERIAL_PORT -1 -opt_set MOTHERBOARD BOARD_AGCM4_RAMPS_144 -opt_set TEMP_SENSOR_0 11 -opt_set TEMP_SENSOR_BED 11 -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2209 -opt_set Z_DRIVER_TYPE TMC2209 -opt_set Z2_DRIVER_TYPE TMC2209 -opt_set E0_DRIVER_TYPE TMC2209 -opt_set RESTORE_LEVELING_AFTER_G28 false -opt_set LCD_LANGUAGE it -opt_set NUM_Z_STEPPER_DRIVERS 2 -opt_set HOMING_BUMP_MM "{ 0, 0, 0 }" -opt_set SDCARD_CONNECTION LCD +opt_set MOTHERBOARD BOARD_AGCM4_RAMPS_144 SERIAL_PORT -1 \ + TEMP_SENSOR_0 11 TEMP_SENSOR_BED 11 \ + X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 Z2_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209 \ + RESTORE_LEVELING_AFTER_G28 false \ + LCD_LANGUAGE it \ + SDCARD_CONNECTION LCD \ + NUM_Z_STEPPER_DRIVERS 2 \ + HOMING_BUMP_MM '{ 0, 0, 0 }' opt_enable ENDSTOP_INTERRUPTS_FEATURE S_CURVE_ACCELERATION BLTOUCH Z_MIN_PROBE_REPEATABILITY_TEST \ FILAMENT_RUNOUT_SENSOR G26_MESH_VALIDATION MESH_EDIT_GFX_OVERLAY Z_SAFE_HOMING \ EEPROM_SETTINGS NOZZLE_PARK_FEATURE SDSUPPORT SD_CHECK_AND_RETRY \ diff --git a/buildroot/tests/STM32F070CB_malyan-tests b/buildroot/tests/STM32F070CB_malyan-tests index eeec7e9b1f..060d707b04 100755 --- a/buildroot/tests/STM32F070CB_malyan-tests +++ b/buildroot/tests/STM32F070CB_malyan-tests @@ -7,8 +7,7 @@ set -e restore_configs -opt_set MOTHERBOARD BOARD_MALYAN_M200_V2 -opt_set SERIAL_PORT -1 +opt_set MOTHERBOARD BOARD_MALYAN_M200_V2 SERIAL_PORT -1 exec_test $1 $2 "Malyan M200 v2 Default Config" "$3" # cleanup diff --git a/buildroot/tests/STM32F103RC_btt-tests b/buildroot/tests/STM32F103RC_btt-tests index f500b76315..e76060aee8 100755 --- a/buildroot/tests/STM32F103RC_btt-tests +++ b/buildroot/tests/STM32F103RC_btt-tests @@ -10,13 +10,8 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 -opt_set SERIAL_PORT 1 -opt_set SERIAL_PORT_2 -1 -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2209 -opt_set Z_DRIVER_TYPE TMC2209 -opt_set E0_DRIVER_TYPE TMC2209 +opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 SERIAL_PORT 1 SERIAL_PORT_2 -1 \ + X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209 opt_enable PINS_DEBUGGING Z_IDLE_HEIGHT exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3" diff --git a/buildroot/tests/STM32F103RC_btt_USB-tests b/buildroot/tests/STM32F103RC_btt_USB-tests index d752c87d18..8381de0ea6 100755 --- a/buildroot/tests/STM32F103RC_btt_USB-tests +++ b/buildroot/tests/STM32F103RC_btt_USB-tests @@ -10,9 +10,7 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 -opt_set SERIAL_PORT 1 -opt_set SERIAL_PORT_2 -1 +opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1 exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3" # clean up diff --git a/buildroot/tests/STM32F103RC_meeb-tests b/buildroot/tests/STM32F103RC_meeb-tests index 4fcb6e8118..3a191b4e7e 100755 --- a/buildroot/tests/STM32F103RC_meeb-tests +++ b/buildroot/tests/STM32F103RC_meeb-tests @@ -10,13 +10,8 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_CCROBOT_MEEB_3DP -opt_set SERIAL_PORT 1 -opt_set SERIAL_PORT_2 -1 -opt_set X_DRIVER_TYPE TMC2208 -opt_set Y_DRIVER_TYPE TMC2208 -opt_set Z_DRIVER_TYPE TMC2208 -opt_set E0_DRIVER_TYPE TMC2208 +opt_set MOTHERBOARD BOARD_CCROBOT_MEEB_3DP SERIAL_PORT 1 SERIAL_PORT_2 -1 \ + X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2208 Z_DRIVER_TYPE TMC2208 E0_DRIVER_TYPE TMC2208 exec_test $1 $2 "MEEB_3DP - Basic Config with TMC2208 SW Serial" "$3" # clean up diff --git a/buildroot/tests/STM32F103RE-tests b/buildroot/tests/STM32F103RE-tests index 909c362d06..426f87d21b 100755 --- a/buildroot/tests/STM32F103RE-tests +++ b/buildroot/tests/STM32F103RE-tests @@ -10,9 +10,7 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_STM32F103RE -opt_set EXTRUDERS 2 -opt_set SERIAL_PORT -1 +opt_set MOTHERBOARD BOARD_STM32F103RE SERIAL_PORT -1 EXTRUDERS 2 opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \ PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \ BAUD_RATE_GCODE GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE diff --git a/buildroot/tests/STM32F103RET6_creality-tests b/buildroot/tests/STM32F103RET6_creality-tests index 199bd6a9c2..ef020a33f1 100755 --- a/buildroot/tests/STM32F103RET6_creality-tests +++ b/buildroot/tests/STM32F103RET6_creality-tests @@ -19,11 +19,10 @@ opt_add SDCARD_EEPROM_EMULATION exec_test $1 $2 "Ender 3 v2, SD EEPROM, w/o CLASSIC_JERK" "$3" restore_configs -opt_set SERIAL_PORT 1 -opt_set MOTHERBOARD BOARD_CREALITY_V452 +opt_set MOTHERBOARD BOARD_CREALITY_V452 SERIAL_PORT 1 opt_disable NOZZLE_TO_PROBE_OFFSET -opt_enable NOZZLE_AS_PROBE Z_SAFE_HOMING Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN -opt_enable PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE +opt_enable NOZZLE_AS_PROBE Z_SAFE_HOMING Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN \ + PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE exec_test $1 $2 "Creality V4.5.2 PROBE_ACTIVATION_SWITCH, Probe Tare" "$3" # clean up diff --git a/buildroot/tests/STM32F103RE_btt-tests b/buildroot/tests/STM32F103RE_btt-tests index ab8681c7f5..97d7ffec4b 100755 --- a/buildroot/tests/STM32F103RE_btt-tests +++ b/buildroot/tests/STM32F103RE_btt-tests @@ -10,12 +10,10 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP -opt_set SERIAL_PORT 1 -opt_set SERIAL_PORT_2 -1 -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2130 -exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Config with mixed TMC Drivers" "$3" +opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP \ + SERIAL_PORT 1 SERIAL_PORT_2 -1 \ + X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130 +exec_test $1 $2 "BTT SKR E3 DIP 1.0 | Mixed TMC Drivers" "$3" # clean up restore_configs diff --git a/buildroot/tests/STM32F103RE_btt_USB-tests b/buildroot/tests/STM32F103RE_btt_USB-tests index 43162b68a4..c63a90e436 100755 --- a/buildroot/tests/STM32F103RE_btt_USB-tests +++ b/buildroot/tests/STM32F103RE_btt_USB-tests @@ -10,16 +10,11 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP -opt_set SERIAL_PORT 1 -opt_set SERIAL_PORT_2 -1 +opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP SERIAL_PORT 1 SERIAL_PORT_2 -1 exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" "$3" restore_configs -opt_set MOTHERBOARD BOARD_BTT_SKR_CR6 -opt_set SERIAL_PORT -1 -opt_set SERIAL_PORT_2 2 -opt_set TEMP_SENSOR_BED 1 +opt_set MOTHERBOARD BOARD_BTT_SKR_CR6 SERIAL_PORT -1 SERIAL_PORT_2 2 TEMP_SENSOR_BED 1 opt_enable CR10_STOCKDISPLAY \ NOZZLE_AS_PROBE Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN Z_SAFE_HOMING \ PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE \ diff --git a/buildroot/tests/STM32F401VE_STEVAL-tests b/buildroot/tests/STM32F401VE_STEVAL-tests index d7c90e7907..1704f3d2f0 100755 --- a/buildroot/tests/STM32F401VE_STEVAL-tests +++ b/buildroot/tests/STM32F401VE_STEVAL-tests @@ -8,8 +8,7 @@ set -e # Build examples restore_configs -opt_set MOTHERBOARD BOARD_STEVAL_3DP001V1 -opt_set SERIAL_PORT -1 +opt_set MOTHERBOARD BOARD_STEVAL_3DP001V1 SERIAL_PORT -1 exec_test $1 $2 "STM32F401VE_STEVAL Default Config" "$3" # cleanup diff --git a/buildroot/tests/esp32-tests b/buildroot/tests/esp32-tests index 310eea298e..a0f79107cf 100755 --- a/buildroot/tests/esp32-tests +++ b/buildroot/tests/esp32-tests @@ -10,30 +10,19 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 +opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 TX_BUFFER_SIZE 64 \ + WIFI_SSID '"ssid"' WIFI_PWD '"password"' opt_enable WIFISUPPORT WEBSUPPORT GCODE_MACROS BAUD_RATE_GCODE M115_GEOMETRY_REPORT REPETIER_GCODE_M360 -opt_add WIFI_SSID "\"ssid\"" -opt_add WIFI_PWD "\"password\"" -opt_set TX_BUFFER_SIZE 64 exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT" "$3" # # Build with TMC drivers using hardware serial # restore_configs -opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2208 -opt_set Z_DRIVER_TYPE TMC2209 -opt_set E0_DRIVER_TYPE TMC2209 -opt_set X_HARDWARE_SERIAL Serial1 -opt_set Y_HARDWARE_SERIAL Serial1 -opt_set Z_HARDWARE_SERIAL Serial1 -opt_set E0_HARDWARE_SERIAL Serial1 -opt_set X_SLAVE_ADDRESS 0 -opt_set Y_SLAVE_ADDRESS 1 -opt_set Z_SLAVE_ADDRESS 2 -opt_set E0_SLAVE_ADDRESS 3 +opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 \ + X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2208 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209 \ + X_HARDWARE_SERIAL Serial1 Y_HARDWARE_SERIAL Serial1 Z_HARDWARE_SERIAL Serial1 E0_HARDWARE_SERIAL Serial1 \ + X_SLAVE_ADDRESS 0 Y_SLAVE_ADDRESS 1 Z_SLAVE_ADDRESS 2 E0_SLAVE_ADDRESS 3 opt_enable HOTEND_IDLE_TIMEOUT SOFTWARE_DRIVER_ENABLE exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle" "$3" diff --git a/buildroot/tests/linux_native-tests b/buildroot/tests/linux_native-tests index 711691fb9d..0153687eac 100755 --- a/buildroot/tests/linux_native-tests +++ b/buildroot/tests/linux_native-tests @@ -10,8 +10,7 @@ set -e # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_LINUX_RAMPS -opt_set TEMP_SENSOR_BED 1 +opt_set MOTHERBOARD BOARD_LINUX_RAMPS TEMP_SENSOR_BED 1 opt_enable PIDTEMPBED EEPROM_SETTINGS BAUD_RATE_GCODE exec_test $1 $2 "Linux with EEPROM" "$3" diff --git a/buildroot/tests/mega1280-tests b/buildroot/tests/mega1280-tests index 9110e9feb6..8b16b1dbc8 100755 --- a/buildroot/tests/mega1280-tests +++ b/buildroot/tests/mega1280-tests @@ -16,29 +16,25 @@ set -e # Test MESH_BED_LEVELING feature, with LCD # restore_configs -opt_set LCD_LANGUAGE an +opt_set LCD_LANGUAGE an \ + POWER_MONITOR_CURRENT_PIN 14 POWER_MONITOR_VOLTAGE_PIN 15 \ + CLOSED_LOOP_ENABLE_PIN 44 CLOSED_LOOP_MOVE_COMPLETE_PIN 45 opt_enable SPINDLE_FEATURE ULTIMAKERCONTROLLER LCD_BED_LEVELING \ EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT \ SENSORLESS_BACKOFF_MM HOMING_BACKOFF_POST_MM HOME_Y_BEFORE_X CODEPENDENT_XY_HOMING \ MESH_BED_LEVELING ENABLE_LEVELING_FADE_HEIGHT MESH_G28_REST_ORIGIN \ G26_MESH_VALIDATION MESH_EDIT_MENU GCODE_QUOTED_STRINGS \ EXTERNAL_CLOSED_LOOP_CONTROLLER POWER_MONITOR_CURRENT POWER_MONITOR_VOLTAGE -opt_set POWER_MONITOR_CURRENT_PIN 14 -opt_set POWER_MONITOR_VOLTAGE_PIN 15 -opt_set CLOSED_LOOP_ENABLE_PIN 44 -opt_set CLOSED_LOOP_MOVE_COMPLETE_PIN 45 exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD" "$3" # # Test DUAL_X_CARRIAGE # restore_configs -opt_set MOTHERBOARD BOARD_ZRIB_V52 -opt_set LCD_LANGUAGE pt -opt_set EXTRUDERS 2 -opt_set TEMP_SENSOR_1 1 +opt_set MOTHERBOARD BOARD_ZRIB_V52 \ + LCD_LANGUAGE pt REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 \ + EXTRUDERS 2 TEMP_SENSOR_1 1 opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD -opt_set REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 exec_test $1 $2 "ZRIB_V52 | DUAL_X_CARRIAGE" "$3" # diff --git a/buildroot/tests/mega2560-tests b/buildroot/tests/mega2560-tests index d74aa30f88..d961ab4eff 100755 --- a/buildroot/tests/mega2560-tests +++ b/buildroot/tests/mega2560-tests @@ -16,17 +16,10 @@ set -e # Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders # use_example_configs AnimationExample -opt_set SHOW_CUSTOM_BOOTSCREEN -opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO -opt_set LCD_LANGUAGE fr -opt_set EXTRUDERS 5 -opt_set TEMP_SENSOR_1 1 -opt_set TEMP_SENSOR_2 5 -opt_set TEMP_SENSOR_3 20 -opt_set TEMP_SENSOR_4 1000 -opt_set TEMP_SENSOR_BED 1 +opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE fr \ + EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1 opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \ - REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING BOOT_MARLIN_LOGO_SMALL \ + REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \ SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES CANCEL_OBJECTS SOUND_MENU_ITEM \ EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_USER_MENUS \ MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \ @@ -38,26 +31,18 @@ exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language # use_example_configs AnimationExample -opt_set SHOW_CUSTOM_BOOTSCREEN -opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO -opt_set LCD_LANGUAGE fr -opt_set EXTRUDERS 5 -opt_set TEMP_SENSOR_1 1 -opt_set TEMP_SENSOR_2 5 -opt_set TEMP_SENSOR_3 20 -opt_set TEMP_SENSOR_4 1000 -opt_set TEMP_SENSOR_BED 1 -opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \ - REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING BOOT_MARLIN_LOGO_SMALL \ - SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT SCROLL_LONG_FILENAMES CANCEL_OBJECTS NO_SD_AUTOSTART \ +opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE jp_kana \ + EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1 +opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \ + LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES \ + SDSUPPORT SDCARD_SORT_ALPHA NO_SD_AUTOSTART USB_FLASH_DRIVE_SUPPORT CANCEL_OBJECTS \ + Z_PROBE_SLED AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT \ EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_USER_MENUS \ MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE QUICK_HOME \ - LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \ - BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL \ - Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE -opt_set LCD_LANGUAGE jp_kana + NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL \ + SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \ + BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL opt_disable SEGMENT_LEVELED_MOVES -opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL M114_DETAIL exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..." "$3" @@ -65,25 +50,16 @@ exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sle # 5 runout sensors with distinct states # restore_configs -opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO -opt_set EXTRUDERS 5 -opt_set NUM_SERVOS 1 -opt_set TEMP_SENSOR_1 1 -opt_set TEMP_SENSOR_2 1 -opt_set TEMP_SENSOR_3 1 -opt_set TEMP_SENSOR_4 1 +opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO NUM_SERVOS 1 \ + EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 \ + NUM_RUNOUT_SENSORS 5 FIL_RUNOUT2_PIN 44 FIL_RUNOUT3_PIN 45 FIL_RUNOUT4_PIN 46 FIL_RUNOUT5_PIN 47 \ + FIL_RUNOUT3_STATE HIGH opt_enable VIKI2 BOOT_MARLIN_LOGO_ANIMATED SDSUPPORT AUTO_REPORT_SD_STATUS \ Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE \ EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL \ NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \ DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \ FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING FIL_RUNOUT3_PULLUP -opt_set NUM_RUNOUT_SENSORS 5 -opt_set FIL_RUNOUT2_PIN 44 -opt_set FIL_RUNOUT3_PIN 45 -opt_set FIL_RUNOUT3_STATE HIGH -opt_set FIL_RUNOUT4_PIN 46 -opt_set FIL_RUNOUT5_PIN 47 exec_test $1 $2 "Multiple runout sensors (x5) | Distinct runout states" "$3" @@ -91,27 +67,19 @@ exec_test $1 $2 "Multiple runout sensors (x5) | Distinct runout states" "$3" # Mixing Extruder with 5 steppers, Greek # restore_configs -opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO -opt_set LCD_LANGUAGE el_gr +opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO MIXING_STEPPERS 5 LCD_LANGUAGE ru \ + NUM_RUNOUT_SENSORS E_STEPPERS FIL_RUNOUT2_PIN 16 FIL_RUNOUT3_PIN 17 FIL_RUNOUT4_PIN 4 FIL_RUNOUT5_PIN 5 opt_enable MIXING_EXTRUDER GRADIENT_MIX GRADIENT_VTOOL CR10_STOCKDISPLAY \ USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z \ FILAMENT_RUNOUT_SENSOR ADVANCED_PAUSE_FEATURE NOZZLE_PARK_FEATURE -opt_set MIXING_STEPPERS 5 -opt_set NUM_RUNOUT_SENSORS E_STEPPERS -opt_set FIL_RUNOUT2_PIN 16 -opt_set FIL_RUNOUT3_PIN 17 -opt_set FIL_RUNOUT4_PIN 4 -opt_set FIL_RUNOUT5_PIN 5 -opt_set LCD_LANGUAGE ru exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3" # # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER # #restore_configs -#opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D -#opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 -#opt_set LCD_FEEDBACK_FREQUENCY_HZ 100 +#opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D \ +# LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 LCD_FEEDBACK_FREQUENCY_HZ 100 #opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER # @@ -153,10 +121,7 @@ exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3" # #restore_configs #opt_enable G3D_PANEL SDSUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES -#opt_set SDSORT_GCODE true -#opt_set SDSORT_USES_RAM true -#opt_set SDSORT_USES_STACK true -#opt_set SDSORT_CACHE_NAMES true +#opt_set SDSORT_GCODE true SDSORT_USES_RAM true SDSORT_USES_STACK true SDSORT_CACHE_NAMES true #exec_test $1 $2 "Stuff" "$3" # # REPRAPWORLD_KEYPAD diff --git a/buildroot/tests/mks_robin_lite-tests b/buildroot/tests/mks_robin_lite-tests index c4be4f206d..49ef004871 100755 --- a/buildroot/tests/mks_robin_lite-tests +++ b/buildroot/tests/mks_robin_lite-tests @@ -7,10 +7,8 @@ set -e restore_configs -opt_set MOTHERBOARD BOARD_MKS_ROBIN_LITE -opt_set SERIAL_PORT 1 -opt_enable EEPROM_SETTINGS -opt_enable SDSUPPORT +opt_set MOTHERBOARD BOARD_MKS_ROBIN_LITE SERIAL_PORT 1 +opt_enable EEPROM_SETTINGS SDSUPPORT exec_test $1 $2 "Default Configuration with Fallback SD EEPROM" "$3" # cleanup diff --git a/buildroot/tests/mks_robin_mini-tests b/buildroot/tests/mks_robin_mini-tests index 6675634f30..29baee8818 100755 --- a/buildroot/tests/mks_robin_mini-tests +++ b/buildroot/tests/mks_robin_mini-tests @@ -8,9 +8,7 @@ set -e use_example_configs Mks/Robin -opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI -opt_set EXTRUDERS 1 -opt_set TEMP_SENSOR_1 0 +opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI EXTRUDERS 1 TEMP_SENSOR_1 0 exec_test $1 $2 "MKS Robin mini" "$3" # cleanup diff --git a/buildroot/tests/mks_robin_nano35-tests b/buildroot/tests/mks_robin_nano35-tests index 6e2f9f1b0c..7ab592aaa3 100755 --- a/buildroot/tests/mks_robin_nano35-tests +++ b/buildroot/tests/mks_robin_nano35-tests @@ -49,11 +49,9 @@ exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3" # (Robin v2 nano has no FSMC interface) # use_example_configs Mks/Robin -opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 +opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2209 exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3" # diff --git a/buildroot/tests/mks_robin_nano35_stm32-tests b/buildroot/tests/mks_robin_nano35_stm32-tests index 696fb94069..0891744692 100755 --- a/buildroot/tests/mks_robin_nano35_stm32-tests +++ b/buildroot/tests/mks_robin_nano35_stm32-tests @@ -58,11 +58,9 @@ exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3" # (Robin v2 nano has no FSMC interface) # # use_example_configs Mks/Robin -# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 +# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 # opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 # opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 -# opt_set X_DRIVER_TYPE TMC2209 -# opt_set Y_DRIVER_TYPE TMC2209 # exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3" # cleanup diff --git a/buildroot/tests/mks_robin_pro-tests b/buildroot/tests/mks_robin_pro-tests index 3503d0ce1f..4b38ab97b6 100755 --- a/buildroot/tests/mks_robin_pro-tests +++ b/buildroot/tests/mks_robin_pro-tests @@ -8,13 +8,11 @@ set -e use_example_configs Mks/Robin_Pro opt_enable EMERGENCY_PARSER -opt_set SERIAL_PORT 3 -opt_disable SERIAL_PORT_2 -opt_set SDCARD_CONNECTION LCD -opt_set X_DRIVER_TYPE TMC2209 -opt_set Y_DRIVER_TYPE TMC2130 -opt_set TEMP_SENSOR_BED 1 -opt_disable THERMAL_PROTECTION_HOTENDS +opt_set SERIAL_PORT 3 \ + SDCARD_CONNECTION LCD \ + X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130 \ + TEMP_SENSOR_BED 1 +opt_disable SERIAL_PORT_2 THERMAL_PROTECTION_HOTENDS exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection" "$3" # cleanup diff --git a/buildroot/tests/rambo-tests b/buildroot/tests/rambo-tests index 02ecf5d3fc..5da4eed9b4 100755 --- a/buildroot/tests/rambo-tests +++ b/buildroot/tests/rambo-tests @@ -10,22 +10,14 @@ set -e # Lots of options - Formerly the first Mega2560 test # restore_configs -opt_set MOTHERBOARD BOARD_RAMBO -opt_set EXTRUDERS 2 -opt_set TEMP_SENSOR_0 -2 -opt_set TEMP_SENSOR_1 1 -opt_set TEMP_SENSOR_BED 2 -opt_set TEMP_SENSOR_PROBE 1 -opt_add TEMP_PROBE_PIN 12 -opt_set TEMP_SENSOR_CHAMBER 3 -opt_add TEMP_CHAMBER_PIN 3 -opt_add HEATER_CHAMBER_PIN 45 -opt_set GRID_MAX_POINTS_X 16 -opt_set FANMUX0_PIN 53 -opt_set Z_HOME_DIR 1 -opt_enable USE_ZMAX_PLUG +opt_set MOTHERBOARD BOARD_RAMBO \ + EXTRUDERS 2 TEMP_SENSOR_0 -2 TEMP_SENSOR_1 1 TEMP_SENSOR_BED 2 \ + TEMP_SENSOR_PROBE 1 TEMP_PROBE_PIN 12 \ + TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 3 HEATER_CHAMBER_PIN 45 \ + Z_HOME_DIR 1 GRID_MAX_POINTS_X 16 \ + FANMUX0_PIN 53 opt_disable USE_ZMIN_PLUG Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN USE_WATCHDOG -opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \ +opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \ FIX_MOUNTED_PROBE CODEPENDENT_XY_HOMING PIDTEMPBED PROBE_TEMP_COMPENSATION \ PREHEAT_BEFORE_PROBING PROBING_HEATERS_OFF PROBING_FANS_OFF PROBING_STEPPERS_OFF WAIT_FOR_BED_HEATER \ EEPROM_SETTINGS SDSUPPORT SD_REPRINT_LAST_SELECTED_FILE BINARY_FILE_TRANSFER \ @@ -50,12 +42,10 @@ exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | # Full size Rambo Dual Endstop CNC # restore_configs -opt_set MOTHERBOARD BOARD_RAMBO -opt_set EXTRUDERS 0 -opt_set TEMP_SENSOR_0 999 -opt_set DUMMY_THERMISTOR_999_VALUE 170 -opt_set DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }' -opt_set LEVEL_CORNERS_LEVELING_ORDER '{ LF, RF }' +opt_set MOTHERBOARD BOARD_RAMBO \ + EXTRUDERS 0 TEMP_SENSOR_0 999 DUMMY_THERMISTOR_999_VALUE 170 \ + DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }' \ + LEVEL_CORNERS_LEVELING_ORDER '{ LF, RF }' opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \ REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \ S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \ @@ -68,9 +58,7 @@ exec_test $1 $2 "Rambo CNC Configuration" "$3" # Rambo heated bed only # restore_configs -opt_set MOTHERBOARD BOARD_RAMBO -opt_set EXTRUDERS 0 -opt_set TEMP_SENSOR_BED 1 +opt_set MOTHERBOARD BOARD_RAMBO EXTRUDERS 0 TEMP_SENSOR_BED 1 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER exec_test $1 $2 "Rambo heated bed only" "$3" @@ -78,18 +66,18 @@ exec_test $1 $2 "Rambo heated bed only" "$3" # Build with the default configurations # restore_configs -opt_set MOTHERBOARD BOARD_EINSY_RAMBO -opt_set X_DRIVER_TYPE TMC2130 -opt_set Y_DRIVER_TYPE TMC2130 -opt_set Z_DRIVER_TYPE TMC2130 -opt_set E0_DRIVER_TYPE TMC2130 +opt_set MOTHERBOARD BOARD_EINSY_RAMBO \ + X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130 E0_DRIVER_TYPE TMC2130 exec_test $1 $2 "Einsy RAMBo with TMC2130" "$3" # # Test MINIRAMBO with PWM_MOTOR_CURRENT and many features # restore_configs -opt_set MOTHERBOARD BOARD_MINIRAMBO +opt_set MOTHERBOARD BOARD_MINIRAMBO \ + CONTROLLERFAN_SPEED_IDLE 128 \ + PWM_MOTOR_CURRENT '{ 1300, 1300, 1250 }' \ + I2C_SLAVE_ADDRESS 63 opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \ SDSUPPORT PCA9632 SOUND_MENU_ITEM GCODE_REPEAT_MARKERS \ AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY LCD_BED_LEVELING G26_MESH_VALIDATION MESH_EDIT_MENU \ @@ -98,23 +86,23 @@ opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CO NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \ ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \ PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 M114_DETAIL -opt_set CONTROLLERFAN_SPEED_IDLE 128 opt_add M100_FREE_MEMORY_DUMPER opt_add M100_FREE_MEMORY_CORRUPTOR -opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }" -opt_set I2C_SLAVE_ADDRESS 63 exec_test $1 $2 "MINIRAMBO | RRDGFSC | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..." "$3" # # Test many less common options # restore_configs -opt_set MOTHERBOARD BOARD_RAMBO -opt_set TEMP_SENSOR_0 -2 -opt_set DIGIPOT_I2C_NUM_CHANNELS 5 -opt_set LCD_LANGUAGE it -opt_set MIXING_STEPPERS 2 -opt_set SERVO_DELAY "{ 300, 300, 300 }" +opt_set MOTHERBOARD BOARD_RAMBO \ + TEMP_SENSOR_0 -2 \ + DIGIPOT_I2C_NUM_CHANNELS 5 \ + LCD_LANGUAGE it \ + MIXING_STEPPERS 2 \ + SERVO_DELAY '{ 300, 300, 300 }' \ + CONTROLLER_FAN_PIN X_MAX_PIN FILWIDTH_PIN 5 \ + FAN_MIN_PWM 50 FAN_KICKSTART_TIME 100 \ + XY_FREQUENCY_LIMIT 15 opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \ BABYSTEPPING BABYSTEP_DISPLAY_TOTAL FILAMENT_LCD_DISPLAY \ REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER MENU_ADDAUTOSTART SDSUPPORT SDCARD_SORT_ALPHA \ @@ -124,11 +112,6 @@ opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \ SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT ADVANCED_OK M114_DETAIL \ VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS EXTRA_FAN_SPEED FWRETRACT \ USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_USE_Z_ONLY -opt_set CONTROLLER_FAN_PIN X_MAX_PIN -opt_set FAN_MIN_PWM 50 -opt_set FAN_KICKSTART_TIME 100 -opt_set XY_FREQUENCY_LIMIT 15 -opt_add FILWIDTH_PIN 5 exec_test $1 $2 "Rambo | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." "$3" # clean up diff --git a/buildroot/tests/rumba32-tests b/buildroot/tests/rumba32-tests index 20a640efed..f26af33610 100755 --- a/buildroot/tests/rumba32-tests +++ b/buildroot/tests/rumba32-tests @@ -8,31 +8,23 @@ set -e # Build examples restore_configs -opt_set MOTHERBOARD BOARD_RUMBA32_V1_0 -opt_set SERIAL_PORT -1 +opt_set MOTHERBOARD BOARD_RUMBA32_V1_0 SERIAL_PORT -1 \ + TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130 opt_disable PIDTEMP opt_enable PIDTEMPBED -opt_set TEMP_SENSOR_BED 1 opt_disable THERMAL_PROTECTION_BED -opt_set X_DRIVER_TYPE TMC2130 exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled" "$3" # Build examples restore_configs -opt_set MOTHERBOARD BOARD_RUMBA32_V1_1 -opt_set SERIAL_PORT -1 +opt_set MOTHERBOARD BOARD_RUMBA32_V1_1 SERIAL_PORT -1 \ + TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208 opt_enable PIDTEMPBED EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -opt_set TEMP_SENSOR_BED 1 -opt_set X_DRIVER_TYPE TMC2130 -opt_set Y_DRIVER_TYPE TMC2208 exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" "$3" # Build examples restore_configs -opt_set MOTHERBOARD BOARD_RUMBA32_MKS -opt_set SERIAL_PORT -1 -opt_set X_DRIVER_TYPE TMC2130 -opt_set Y_DRIVER_TYPE TMC2208 +opt_set MOTHERBOARD BOARD_RUMBA32_MKS SERIAL_PORT -1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208 exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" "$3" # cleanup diff --git a/buildroot/tests/sanguino1284p-tests b/buildroot/tests/sanguino1284p-tests index 55cdf418da..7c2aa61f69 100755 --- a/buildroot/tests/sanguino1284p-tests +++ b/buildroot/tests/sanguino1284p-tests @@ -10,10 +10,10 @@ set -e # Start with default configurations... # restore_configs -opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12 -opt_set LCD_LANGUAGE de +opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12 \ + LCD_LANGUAGE de \ + CONTROLLER_FAN_PIN 27 opt_enable MINIPANEL USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE -opt_set CONTROLLER_FAN_PIN 27 exec_test $1 $2 "Default Configuration | MINIPANAL | CONTROLLER_FAN" "$3" # diff --git a/buildroot/tests/teensy31-tests b/buildroot/tests/teensy31-tests index cf01d27461..10dde2be99 100755 --- a/buildroot/tests/teensy31-tests +++ b/buildroot/tests/teensy31-tests @@ -22,9 +22,10 @@ exec_test $1 $2 "Teensy3.1 with Zero Endstops" "$3" # Test many features together # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY31_32 -opt_set TEMP_SENSOR_0 1 -opt_set TEMP_SENSOR_BED 1 +opt_set MOTHERBOARD BOARD_TEENSY31_32 \ + TEMP_SENSOR_0 1 TEMP_SENSOR_BED 1 \ + I2C_SLAVE_ADDRESS 63 \ + GRID_MAX_POINTS_X 16 opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCODE \ FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR DEBUG_LEVELING_FEATURE Z_MIN_PROBE_REPEATABILITY_TEST \ BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET PRINTCOUNTER SLOW_PWM_HEATERS PIDTEMPBED \ @@ -33,6 +34,4 @@ opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCO ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \ PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \ HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT -opt_set I2C_SLAVE_ADDRESS 63 -opt_set GRID_MAX_POINTS_X 16 exec_test $1 $2 "Teensy3.1 with many features" "$3" diff --git a/buildroot/tests/teensy35-tests b/buildroot/tests/teensy35-tests index 79998a26d3..c4d007cd62 100755 --- a/buildroot/tests/teensy35-tests +++ b/buildroot/tests/teensy35-tests @@ -14,11 +14,10 @@ exec_test $1 $2 "Teensy3.5 with default config" "$3" # Test as many features together as possible # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY35_36 -opt_set EXTRUDERS 2 -opt_set TEMP_SENSOR_0 1 -opt_set TEMP_SENSOR_1 5 -opt_set TEMP_SENSOR_BED 1 +opt_set MOTHERBOARD BOARD_TEENSY35_36 \ + EXTRUDERS 2 TEMP_SENSOR_0 1 TEMP_SENSOR_1 5 TEMP_SENSOR_BED 1 \ + I2C_SLAVE_ADDRESS 63 \ + GRID_MAX_POINTS_X 16 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \ FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE SOUND_MENU_ITEM \ FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ @@ -27,8 +26,6 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \ PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \ HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT -opt_set I2C_SLAVE_ADDRESS 63 -opt_set GRID_MAX_POINTS_X 16 exec_test $1 $2 "Teensy3.5 with many features" "$3" # @@ -43,10 +40,9 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3" # Test a Servo Probe # # restore_configs -# opt_set MOTHERBOARD BOARD_TEENSY35_36 +# opt_set MOTHERBOARD BOARD_TEENSY35_36 NUM_SERVOS 1 # opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \ # AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS -# opt_set NUM_SERVOS 1 # exec_test $1 $2 "Servo Probe" # # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES @@ -59,28 +55,23 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3" # Test MAGNETIC_PARKING_EXTRUDER with LCD # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY35_36 -opt_set EXTRUDERS 2 -opt_set TEMP_SENSOR_1 1 -opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER +opt_set MOTHERBOARD BOARD_TEENSY35_36 EXTRUDERS 2 TEMP_SENSOR_1 1 SOL0_PIN 29 +opt_enable PARKING_EXTRUDER ULTIMAKERCONTROLLER exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD" "$3" # # Mixing Extruder # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY35_36 +opt_set MOTHERBOARD BOARD_TEENSY35_36 MIXING_STEPPERS 2 opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -opt_set MIXING_STEPPERS 2 exec_test $1 $2 "Mixing Extruder" "$3" # # Test SWITCHING_EXTRUDER # # restore_configs -# opt_set MOTHERBOARD BOARD_TEENSY35_36 -# opt_set EXTRUDERS 2 -# opt_set NUM_SERVOS 1 +# opt_set MOTHERBOARD BOARD_TEENSY35_36 EXTRUDERS 2 NUM_SERVOS 1 # opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER # exec_test $1 $2 "SWITCHING_EXTRUDER" @@ -88,15 +79,11 @@ exec_test $1 $2 "Mixing Extruder" "$3" # Enable COREXY # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY35_36 -opt_enable COREXY -opt_set X_DRIVER_TYPE TMC5160 -opt_set Y_DRIVER_TYPE TMC5160 -opt_set X_MIN_ENDSTOP_INVERTING true -opt_set Y_MIN_ENDSTOP_INVERTING true -opt_add X_CS_PIN 46 -opt_add Y_CS_PIN 47 -opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING +opt_set MOTHERBOARD BOARD_TEENSY35_36 \ + X_DRIVER_TYPE TMC5160 Y_DRIVER_TYPE TMC5160 \ + X_MIN_ENDSTOP_INVERTING true Y_MIN_ENDSTOP_INVERTING true \ + X_CS_PIN 46 Y_CS_PIN 47 +opt_enable COREXY USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING exec_test $1 $2 "Teensy 3.5/3.6 COREXY" "$3" # @@ -111,11 +98,9 @@ exec_test $1 $2 "Teensy 3.5/3.6 COREXZ" "$3" # Enable Dual Z with Dual Z endstops # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY35_36 -opt_set NUM_Z_STEPPER_DRIVERS 2 +opt_set MOTHERBOARD BOARD_TEENSY35_36 NUM_Z_STEPPER_DRIVERS 2 Z2_MAX_PIN 2 opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG pins_set ramps/RAMPS X_MAX_PIN -1 -opt_add Z2_MAX_PIN 2 exec_test $1 $2 "Dual Z with Dual Z endstops" "$3" # Clean up diff --git a/buildroot/tests/teensy41-tests b/buildroot/tests/teensy41-tests index 6829045496..6074b5dc5f 100755 --- a/buildroot/tests/teensy41-tests +++ b/buildroot/tests/teensy41-tests @@ -14,11 +14,10 @@ exec_test $1 $2 "Teensy4.1 with default config" "$3" # Test as many features together as possible # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY41 -opt_set EXTRUDERS 2 -opt_set TEMP_SENSOR_0 1 -opt_set TEMP_SENSOR_1 5 -opt_set TEMP_SENSOR_BED 1 +opt_set MOTHERBOARD BOARD_TEENSY41 \ + EXTRUDERS 2 TEMP_SENSOR_0 1 TEMP_SENSOR_1 5 TEMP_SENSOR_BED 1 \ + I2C_SLAVE_ADDRESS 63 \ + GRID_MAX_POINTS_X 16 opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \ FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \ FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ @@ -28,8 +27,6 @@ opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \ PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \ HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT opt_add EXTUI_EXAMPLE -opt_set I2C_SLAVE_ADDRESS 63 -opt_set GRID_MAX_POINTS_X 16 exec_test $1 $2 "Teensy4.1 with many features" "$3" # @@ -60,10 +57,8 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3" # Test MAGNETIC_PARKING_EXTRUDER with no LCD # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY41 -opt_set EXTRUDERS 2 -opt_set TEMP_SENSOR_1 1 -opt_set SERIAL_PORT_2 -2 +opt_set MOTHERBOARD BOARD_TEENSY41 SERIAL_PORT_2 -2 \ + EXTRUDERS 2 TEMP_SENSOR_1 1 opt_enable EEPROM_SETTINGS MAGNETIC_PARKING_EXTRUDER exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" "$3" @@ -71,18 +66,15 @@ exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" "$3" # Mixing Extruder # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY41 +opt_set MOTHERBOARD BOARD_TEENSY41 MIXING_STEPPERS 2 opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL -opt_set MIXING_STEPPERS 2 exec_test $1 $2 "Mixing Extruder" "$3" # # Test SWITCHING_EXTRUDER # # restore_configs -# opt_set MOTHERBOARD BOARD_TEENSY41 -# opt_set EXTRUDERS 2 -# opt_set NUM_SERVOS 1 +# opt_set MOTHERBOARD BOARD_TEENSY41 EXTRUDERS 2 NUM_SERVOS 1 # opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER # exec_test $1 $2 "SWITCHING_EXTRUDER" "$3" @@ -90,15 +82,11 @@ exec_test $1 $2 "Mixing Extruder" "$3" # Enable COREXY # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY41 -opt_enable COREXY -opt_set X_DRIVER_TYPE TMC5160 -opt_set Y_DRIVER_TYPE TMC5160 -opt_set X_MIN_ENDSTOP_INVERTING true -opt_set Y_MIN_ENDSTOP_INVERTING true -opt_add X_CS_PIN 46 -opt_add Y_CS_PIN 47 -opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING +opt_set MOTHERBOARD BOARD_TEENSY41 \ + X_DRIVER_TYPE TMC5160 Y_DRIVER_TYPE TMC5160 \ + X_MIN_ENDSTOP_INVERTING true Y_MIN_ENDSTOP_INVERTING true \ + X_CS_PIN 46 Y_CS_PIN 47 +opt_enable COREXY USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING exec_test $1 $2 "Teensy 4.0/4.1 COREXY" "$3" # @@ -113,11 +101,9 @@ exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" "$3" # Enable Dual Z with Dual Z endstops # restore_configs -opt_set MOTHERBOARD BOARD_TEENSY41 +opt_set MOTHERBOARD BOARD_TEENSY41 NUM_Z_STEPPER_DRIVERS 2 Z2_MAX_PIN 2 opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG -opt_set NUM_Z_STEPPER_DRIVERS 2 pins_set ramps/RAMPS X_MAX_PIN -1 -opt_add Z2_MAX_PIN 2 exec_test $1 $2 "Dual Z with Dual Z endstops" "$3" # Clean up