3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 12:04:19 +00:00
Code Issues Releases Wiki Activity

Fix M114 E / R broken by LIN_ADVANCE (#21579)

Browse Source
This commit is contained in:
BigTreeTech 2021-04-10 16:44:36 +08:00 committed by GitHub
parent 3b3a3fa845
commit 37e671612e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 15 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Marlin/src/module/stepper.cpp
View File

@ -1697,12 +1697,12 @@ void Stepper::pulse_phase_isr() {
#if EITHER(LIN_ADVANCE, MIXING_EXTRUDER)
delta_error.e += advance_dividend.e;
if (delta_error.e >= 0) {
count_position.e += count_direction.e;
#if ENABLED(LIN_ADVANCE)
delta_error.e -= advance_divisor;
// Don't step E here - But remember the number of steps to perform
motor_direction(E_AXIS) ? --LA_steps : ++LA_steps;
#else
count_position.e += count_direction.e;
step_needed.e = true;
#endif
}
@ -2283,15 +2283,23 @@ uint32_t Stepper::block_phase_isr() {
#if ENABLED(MIXING_EXTRUDER)
// We don't know which steppers will be stepped because LA loop follows,
// with potentially multiple steps. Set all.
if (LA_steps > 0)
if (LA_steps > 0) {
MIXER_STEPPER_LOOP(j) NORM_E_DIR(j);
else if (LA_steps < 0)
count_direction.e = 1;
}
else if (LA_steps < 0) {
MIXER_STEPPER_LOOP(j) REV_E_DIR(j);
count_direction.e = -1;
}
#else
if (LA_steps > 0)
if (LA_steps > 0) {
NORM_E_DIR(stepper_extruder);
else if (LA_steps < 0)
count_direction.e = 1;
}
else if (LA_steps < 0) {
REV_E_DIR(stepper_extruder);
count_direction.e = -1;
}
#endif
DIR_WAIT_AFTER();
@ -2312,6 +2320,8 @@ uint32_t Stepper::block_phase_isr() {
AWAIT_LOW_PULSE();
#endif
count_position.e += count_direction.e;
// Set the STEP pulse ON
#if ENABLED(MIXING_EXTRUDER)
E_STEP_WRITE(mixer.get_next_stepper(), !INVERT_E_STEP_PIN);