mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-27 13:56:24 +00:00
Merge pull request #4535 from thinkyhead/rc_old_symbols_first
Move tests for old symbols to the top of sanity check
This commit is contained in:
Scott Lahteine
GitHub
commit
3a3984e67a
@ -48,6 +48,93 @@
|
||||
#error "You are using an old Configuration_adv.h file, update it before building Marlin."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Warnings for old configurations
|
||||
*/
|
||||
#if WATCH_TEMP_PERIOD > 500
|
||||
#error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
|
||||
#elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
|
||||
#error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
|
||||
#elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
|
||||
#error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
|
||||
#elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE)
|
||||
#error "Z_LATE_ENABLE can't be used with COREXZ."
|
||||
#elif defined(X_HOME_RETRACT_MM)
|
||||
#error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
|
||||
#elif defined(BEEPER)
|
||||
#error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
|
||||
#elif defined(SDCARDDETECT)
|
||||
#error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
|
||||
#elif defined(SDCARDDETECTINVERTED)
|
||||
#error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
|
||||
#elif defined(BTENABLED)
|
||||
#error "BTENABLED is now BLUETOOTH. Please update your configuration."
|
||||
#elif defined(CUSTOM_MENDEL_NAME)
|
||||
#error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
|
||||
#elif defined(HAS_AUTOMATIC_VERSIONING)
|
||||
#error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
|
||||
#elif defined(ENABLE_AUTO_BED_LEVELING)
|
||||
#error "ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration."
|
||||
#elif defined(SDSLOW)
|
||||
#error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
|
||||
#elif defined(SDEXTRASLOW)
|
||||
#error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
|
||||
#elif defined(FILAMENT_SENSOR)
|
||||
#error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead."
|
||||
#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
|
||||
#error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
|
||||
#elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP)
|
||||
#error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2"
|
||||
#elif defined(LANGUAGE_INCLUDE)
|
||||
#error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
|
||||
#elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
|
||||
#error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
|
||||
#elif defined(PID_PARAMS_PER_EXTRUDER)
|
||||
#error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
|
||||
#elif defined(EXTRUDER_WATTS) || defined(BED_WATTS)
|
||||
#error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration."
|
||||
#elif defined(SERVO_ENDSTOP_ANGLES)
|
||||
#error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
|
||||
#elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
|
||||
#error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
|
||||
#elif defined(XY_TRAVEL_SPEED)
|
||||
#error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
|
||||
#elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
|
||||
#error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
|
||||
#elif defined(SERVO_DEACTIVATION_DELAY)
|
||||
#error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
|
||||
#elif ENABLED(FILAMENTCHANGEENABLE)
|
||||
#error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration."
|
||||
#elif defined(PLA_PREHEAT_HOTEND_TEMP)
|
||||
#error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
|
||||
#elif defined(PLA_PREHEAT_HPB_TEMP)
|
||||
#error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
|
||||
#elif defined(PLA_PREHEAT_FAN_SPEED)
|
||||
#error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
|
||||
#elif defined(ABS_PREHEAT_HOTEND_TEMP)
|
||||
#error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
|
||||
#elif defined(ABS_PREHEAT_HPB_TEMP)
|
||||
#error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
|
||||
#elif defined(ABS_PREHEAT_FAN_SPEED)
|
||||
#error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
|
||||
#elif defined(ENDSTOPS_ONLY_FOR_HOMING)
|
||||
#error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
|
||||
#elif defined(HOMING_FEEDRATE)
|
||||
#error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
|
||||
#elif defined(MANUAL_HOME_POSITIONS)
|
||||
#error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
|
||||
#elif defined(PID_ADD_EXTRUSION_RATE)
|
||||
#error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration."
|
||||
#elif defined(Z_RAISE_BEFORE_HOMING)
|
||||
#error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
|
||||
#elif defined(MIN_Z_HEIGHT_FOR_HOMING)
|
||||
#error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
|
||||
#elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING)
|
||||
#error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_PROBE_DEPLOY_HEIGHT instead."
|
||||
#elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
|
||||
#error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT Please update your configuration."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Marlin release, version and default string
|
||||
*/
|
||||
@ -647,90 +734,3 @@
|
||||
#if ENABLED(EMERGENCY_PARSER) && ENABLED(USBCON)
|
||||
#error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Warnings for old configurations
|
||||
*/
|
||||
#if WATCH_TEMP_PERIOD > 500
|
||||
#error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
|
||||
#elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
|
||||
#error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
|
||||
#elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
|
||||
#error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
|
||||
#elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE)
|
||||
#error "Z_LATE_ENABLE can't be used with COREXZ."
|
||||
#elif defined(X_HOME_RETRACT_MM)
|
||||
#error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
|
||||
#elif defined(BEEPER)
|
||||
#error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
|
||||
#elif defined(SDCARDDETECT)
|
||||
#error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
|
||||
#elif defined(SDCARDDETECTINVERTED)
|
||||
#error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
|
||||
#elif defined(BTENABLED)
|
||||
#error "BTENABLED is now BLUETOOTH. Please update your configuration."
|
||||
#elif defined(CUSTOM_MENDEL_NAME)
|
||||
#error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
|
||||
#elif defined(HAS_AUTOMATIC_VERSIONING)
|
||||
#error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
|
||||
#elif defined(ENABLE_AUTO_BED_LEVELING)
|
||||
#error "ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration."
|
||||
#elif defined(SDSLOW)
|
||||
#error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
|
||||
#elif defined(SDEXTRASLOW)
|
||||
#error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
|
||||
#elif defined(FILAMENT_SENSOR)
|
||||
#error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead."
|
||||
#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
|
||||
#error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
|
||||
#elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP)
|
||||
#error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2"
|
||||
#elif defined(LANGUAGE_INCLUDE)
|
||||
#error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
|
||||
#elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
|
||||
#error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
|
||||
#elif defined(PID_PARAMS_PER_EXTRUDER)
|
||||
#error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
|
||||
#elif defined(EXTRUDER_WATTS) || defined(BED_WATTS)
|
||||
#error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration."
|
||||
#elif defined(SERVO_ENDSTOP_ANGLES)
|
||||
#error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
|
||||
#elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
|
||||
#error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
|
||||
#elif defined(XY_TRAVEL_SPEED)
|
||||
#error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
|
||||
#elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
|
||||
#error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
|
||||
#elif defined(SERVO_DEACTIVATION_DELAY)
|
||||
#error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
|
||||
#elif ENABLED(FILAMENTCHANGEENABLE)
|
||||
#error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration."
|
||||
#elif defined(PLA_PREHEAT_HOTEND_TEMP)
|
||||
#error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
|
||||
#elif defined(PLA_PREHEAT_HPB_TEMP)
|
||||
#error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
|
||||
#elif defined(PLA_PREHEAT_FAN_SPEED)
|
||||
#error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
|
||||
#elif defined(ABS_PREHEAT_HOTEND_TEMP)
|
||||
#error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
|
||||
#elif defined(ABS_PREHEAT_HPB_TEMP)
|
||||
#error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
|
||||
#elif defined(ABS_PREHEAT_FAN_SPEED)
|
||||
#error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
|
||||
#elif defined(ENDSTOPS_ONLY_FOR_HOMING)
|
||||
#error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
|
||||
#elif defined(HOMING_FEEDRATE)
|
||||
#error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
|
||||
#elif defined(MANUAL_HOME_POSITIONS)
|
||||
#error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
|
||||
#elif defined(PID_ADD_EXTRUSION_RATE)
|
||||
#error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration."
|
||||
#elif defined(Z_RAISE_BEFORE_HOMING)
|
||||
#error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
|
||||
#elif defined(MIN_Z_HEIGHT_FOR_HOMING)
|
||||
#error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
|
||||
#elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING)
|
||||
#error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_PROBE_DEPLOY_HEIGHT instead."
|
||||
#elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
|
||||
#error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT Please update your configuration."
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user