diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index ab3fc0d9dd..dad32bf33c 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -918,15 +918,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
index f5a653464d..e6707d46e0 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
@@ -938,15 +938,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
index ca6c783e8e..94344af34f 100644
--- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
+++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
@@ -918,15 +918,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h
index 3e160cd8bf..920d2dc25a 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration.h
@@ -1030,9 +1030,9 @@
 
   // Set the boundaries for probing (where the probe can reach).
   //#define LEFT_PROBE_BED_POSITION 15
-  //#define RIGHT_PROBE_BED_POSITION 170
-  //#define FRONT_PROBE_BED_POSITION 20
-  //#define BACK_PROBE_BED_POSITION 170
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  //#define FRONT_PROBE_BED_POSITION 15
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
 
   // ANET A6
   //#define LEFT_PROBE_BED_POSITION 20
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h
index 5bbd0d66b5..f8a9b462ed 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h
@@ -906,15 +906,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h
index a68f9e025d..7eeccb221d 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h
@@ -906,15 +906,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 1613c81869..9d6cd0ef53 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -917,15 +917,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h
index fd391808ad..e4dd89a0d1 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h
@@ -928,15 +928,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration.h b/Marlin/example_configurations/Creality/CR-10S/Configuration.h
index a33812fd12..535dbf835a 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration.h
@@ -918,15 +918,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
index 32d97fd8e8..9601985b9f 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
@@ -243,6 +243,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
diff --git a/Marlin/example_configurations/Creality/Ender/Configuration.h b/Marlin/example_configurations/Creality/Ender/Configuration.h
index f7e5d82312..a88b14fea7 100644
--- a/Marlin/example_configurations/Creality/Ender/Configuration.h
+++ b/Marlin/example_configurations/Creality/Ender/Configuration.h
@@ -921,15 +921,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Creality/Ender/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender/Configuration_adv.h
index 03f85d3798..2dd70574c0 100644
--- a/Marlin/example_configurations/Creality/Ender/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender/Configuration_adv.h
@@ -243,6 +243,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 7872f6cc3a..9ef32b0153 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -900,15 +900,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 180
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index e0bc4b37dc..8657cd36a2 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -900,15 +900,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 180
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
index 8aba0e701d..abde69f567 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
@@ -810,8 +810,8 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-//#define MIN_SOFTWARE_ENDSTOPS
 // Min software endstops constrain movement within minimum coordinate bounds
+//#define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
index 14eee07d20..17f2225689 100644
--- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
+++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
@@ -933,15 +933,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 68ab1fb010..e67ce23b36 100644
--- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -918,15 +918,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 8
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
index 94a297c22b..317bacb4d1 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
@@ -922,15 +922,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h
index 27b6d792b9..4d33543587 100644
--- a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h
+++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h
@@ -922,15 +922,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
index fbd95a110f..87645c023a 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
@@ -922,15 +922,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index aa3e92a071..f218a168bc 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -918,15 +918,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 453c9c0afe..7594af38d2 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -916,15 +916,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 33a7da7edb..2763f55daf 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -930,15 +930,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h
index 824e4931ce..b073dda2cd 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration.h
@@ -949,15 +949,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h
index fdfe920219..1c8b0aef3b 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration.h
@@ -974,15 +974,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Tronxy/X1/Configuration.h b/Marlin/example_configurations/Tronxy/X1/Configuration.h
index 35d7762418..79a0b69fa9 100644
--- a/Marlin/example_configurations/Tronxy/X1/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X1/Configuration.h
@@ -917,15 +917,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h
index 0ec9bccae1..cdbd2c1216 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h
@@ -948,15 +948,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h
index f6b126c140..610380ff90 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h
@@ -918,15 +918,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
index 5b185faff7..6c69d1ea3f 100644
--- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
@@ -918,15 +918,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h
index b12ee4fb23..abe8cfc2a1 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h	
@@ -928,15 +928,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 93b3138d42..a61bd117a6 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -918,15 +918,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
index 3f129bc572..e40cdf840b 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
@@ -935,8 +935,8 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-//#define MIN_SOFTWARE_ENDSTOPS
 // Min software endstops constrain movement within minimum coordinate bounds
+//#define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
@@ -1049,6 +1049,9 @@
   #define GRID_MAX_POINTS_X 7
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 20
+
   // Set the boundaries for probing (where the probe can reach).
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 15)
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
@@ -1056,9 +1059,6 @@
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 20
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
index 93b6e2ae23..807b0f3536 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
@@ -1048,6 +1048,9 @@
   #define GRID_MAX_POINTS_X 7
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 20
+
   // Set the boundaries for probing (where the probe can reach).
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 15)
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
@@ -1055,9 +1058,6 @@
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 20
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
index 2c72dd4f13..e210c9a655 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
@@ -243,6 +243,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
index 317001a00c..42e38ce621 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@@ -1048,6 +1048,9 @@
   #define GRID_MAX_POINTS_X 9
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   // Set the boundaries for probing (where the probe can reach).
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 15)
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
@@ -1055,9 +1058,6 @@
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 1ecc3fe8e8..d798c36b4a 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -1039,14 +1039,14 @@
   #define GRID_MAX_POINTS_X 9
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 3d2c30808d..f85aee0ae3 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -1042,14 +1042,14 @@
   #define GRID_MAX_POINTS_X 9
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index ed7c706015..151c8765c4 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -1042,14 +1042,14 @@
   #define GRID_MAX_POINTS_X 7
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index 5f47b5f27c..ac48f5458c 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -934,8 +934,8 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-//#define MIN_SOFTWARE_ENDSTOPS
 // Min software endstops constrain movement within minimum coordinate bounds
+//#define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
@@ -1051,14 +1051,14 @@
   #define GRID_MAX_POINTS_X 5
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
   #define FRONT_PROBE_BED_POSITION - (DELTA_PROBEABLE_RADIUS - 20)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS - 40
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
index c24dc94bf5..11aa652b34 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
@@ -819,8 +819,8 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-//#define MIN_SOFTWARE_ENDSTOPS
 // Min software endstops constrain movement within minimum coordinate bounds
+//#define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
@@ -932,15 +932,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 9c823ed159..ec26b0bca2 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -921,15 +921,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index d87233c52a..fb94eee1e1 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -913,15 +913,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 
diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h
index 53ee326f52..7e5f07d585 100644
--- a/Marlin/example_configurations/wt150/Configuration.h
+++ b/Marlin/example_configurations/wt150/Configuration.h
@@ -923,15 +923,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST