From 43ff0ce35fcacba99ea322d77ae00bc777b22a7c Mon Sep 17 00:00:00 2001 From: Petr Zahradnik Date: Thu, 28 Apr 2016 18:57:21 +0200 Subject: [PATCH] Rewritten FILAMENT_CHANGE_ENABLE feature --- .travis.yml | 4 +- Marlin/Configuration_adv.h | 34 ++- Marlin/Marlin.h | 13 +- Marlin/Marlin_main.cpp | 199 ++++++++++-------- Marlin/SanityCheck.h | 6 +- .../Felix/Configuration_adv.h | 34 ++- .../Hephestos/Configuration_adv.h | 34 ++- .../Hephestos_2/Configuration_adv.h | 34 ++- .../K8200/Configuration_adv.h | 34 ++- .../RigidBot/Configuration_adv.h | 34 ++- .../SCARA/Configuration_adv.h | 34 ++- .../TAZ4/Configuration_adv.h | 34 ++- .../WITBOX/Configuration_adv.h | 34 ++- .../delta/biv2.5/Configuration_adv.h | 34 ++- .../delta/generic/Configuration_adv.h | 34 ++- .../delta/kossel_mini/Configuration_adv.h | 34 ++- .../delta/kossel_pro/Configuration_adv.h | 34 ++- .../delta/kossel_xl/Configuration_adv.h | 34 ++- .../makibox/Configuration_adv.h | 34 ++- .../tvrrug/Round2/Configuration_adv.h | 34 ++- Marlin/language_cz.h | 23 ++ Marlin/language_en.h | 67 ++++++ Marlin/ultralcd.cpp | 124 ++++++++++- Marlin/ultralcd.h | 15 ++ 24 files changed, 745 insertions(+), 250 deletions(-) diff --git a/.travis.yml b/.travis.yml index 81808fedcf..eb471fd11e 100644 --- a/.travis.yml +++ b/.travis.yml @@ -161,11 +161,11 @@ script: - opt_set MOTHERBOARD BOARD_MINIRAMBO - build_marlin # - # Test FILAMENTCHANGEENABLE and LCD_INFO_MENU + # Test FILAMENT_CHANGE_FEATURE and LCD_INFO_MENU # - restore_configs - opt_enable ULTIMAKERCONTROLLER - - opt_enable_adv FILAMENTCHANGEENABLE LCD_INFO_MENU + - opt_enable_adv FILAMENT_CHANGE_FEATURE LCD_INFO_MENU - build_marlin # # Enable filament sensor diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 25ec27a118..3a673a6734 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index c4298aaac7..616a8bf357 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -123,8 +123,8 @@ FORCE_INLINE void serialprintPGM(const char* str) { } void idle( - #if ENABLED(FILAMENTCHANGEENABLE) - bool no_stepper_sleep=false // pass true to keep steppers from disabling on timeout + #if ENABLED(FILAMENT_CHANGE_FEATURE) + bool no_stepper_sleep = false // pass true to keep steppers from disabling on timeout #endif ); @@ -346,6 +346,15 @@ float code_value_temp_diff(); extern int meas_delay_cm; //delay distance #endif +#if ENABLED(FILAMENT_CHANGE_FEATURE) + enum FilamentChangeMenuResponse { + FILAMENT_CHANGE_RESPONSE_WAIT_FOR, + FILAMENT_CHANGE_RESPONSE_EXTRUDE_MORE, + FILAMENT_CHANGE_RESPONSE_RESUME_PRINT + }; + extern FilamentChangeMenuResponse filament_change_menu_response; +#endif + #if ENABLED(PID_ADD_EXTRUSION_RATE) extern int lpq_len; #endif diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index b05f5b523c..59f526f060 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -294,6 +294,7 @@ static char command_queue[BUFSIZE][MAX_CMD_SIZE]; #endif const float homing_feedrate[] = HOMING_FEEDRATE; + bool axis_relative_modes[] = AXIS_RELATIVE_MODES; int feedrate_multiplier = 100; //100->1 200->2 int saved_feedrate_multiplier; @@ -490,6 +491,10 @@ static uint8_t target_extruder; static bool filament_ran_out = false; #endif +#if ENABLED(FILAMENT_CHANGE_FEATURE) + FilamentChangeMenuResponse filament_change_menu_response; +#endif + static bool send_ok[BUFSIZE]; #if HAS_SERVOS @@ -1564,9 +1569,8 @@ inline void line_to_z(float zPosition) { inline void line_to_destination(float mm_m) { planner.buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], mm_m / 60, active_extruder); } -inline void line_to_destination() { - line_to_destination(feedrate); -} +inline void line_to_destination() { line_to_destination(feedrate); } + /** * sync_plan_position * Set planner / stepper positions to the cartesian current_position. @@ -3123,7 +3127,7 @@ inline void gcode_G28() { enum MeshLevelingState { MeshReport, MeshStart, MeshNext, MeshSet, MeshSetZOffset, MeshReset }; inline void _mbl_goto_xy(float x, float y) { - saved_feedrate = feedrate; + float old_feedrate = feedrate; feedrate = homing_feedrate[X_AXIS]; current_position[Z_AXIS] = MESH_HOME_SEARCH_Z @@ -3144,7 +3148,7 @@ inline void gcode_G28() { line_to_current_position(); #endif - feedrate = saved_feedrate; + feedrate = old_feedrate; stepper.synchronize(); } @@ -6131,7 +6135,7 @@ inline void gcode_M503() { #endif // HAS_BED_PROBE -#if ENABLED(FILAMENTCHANGEENABLE) +#if ENABLED(FILAMENT_CHANGE_FEATURE) /** * M600: Pause for filament change @@ -6153,129 +6157,160 @@ inline void gcode_M503() { return; } - float lastpos[NUM_AXIS]; - #if ENABLED(DELTA) - float fr60 = feedrate / 60; - #endif + // Show initial message and wait for synchronize steppers + lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INIT); + stepper.synchronize(); - for (int i = 0; i < NUM_AXIS; i++) + float lastpos[NUM_AXIS]; + + // Save current position of all axes + for (uint8_t i = 0; i < NUM_AXIS; i++) lastpos[i] = destination[i] = current_position[i]; + // Define runplan for move axes #if ENABLED(DELTA) - #define RUNPLAN calculate_delta(destination); \ - planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], fr60, active_extruder); + #define RUNPLAN(RATE) calculate_delta(destination); \ + planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], RATE, active_extruder); #else - #define RUNPLAN line_to_destination(); + #define RUNPLAN(RATE) line_to_destination(RATE * 60); #endif - //retract by E + KEEPALIVE_STATE(IN_HANDLER); + + // Initial retract before move to filament change position if (code_seen('E')) destination[E_AXIS] += code_value_axis_units(E_AXIS); - #ifdef FILAMENTCHANGE_FIRSTRETRACT - else destination[E_AXIS] += FILAMENTCHANGE_FIRSTRETRACT; + #if defined(FILAMENT_CHANGE_RETRACT_LENGTH) && FILAMENT_CHANGE_RETRACT_LENGTH > 0 + else destination[E_AXIS] -= FILAMENT_CHANGE_RETRACT_LENGTH; #endif - RUNPLAN; + RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE); - //lift Z - if (code_seen('Z')) destination[Z_AXIS] += code_value_axis_units(Z_AXIS); - #ifdef FILAMENTCHANGE_ZADD - else destination[Z_AXIS] += FILAMENTCHANGE_ZADD; - #endif + // Lift Z axis + float z_lift = code_seen('Z') ? code_value_axis_units(Z_AXIS) : + #if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0 + FILAMENT_CHANGE_Z_ADD + #else + 0 + #endif + ; - RUNPLAN; + if (z_lift > 0) { + destination[Z_AXIS] += z_lift; + NOMORE(destination[Z_AXIS], Z_MAX_POS); + RUNPLAN(FILAMENT_CHANGE_Z_FEEDRATE); + } - //move xy + // Move XY axes to filament exchange position if (code_seen('X')) destination[X_AXIS] = code_value_axis_units(X_AXIS); - #ifdef FILAMENTCHANGE_XPOS - else destination[X_AXIS] = FILAMENTCHANGE_XPOS; + #ifdef FILAMENT_CHANGE_X_POS + else destination[X_AXIS] = FILAMENT_CHANGE_X_POS; #endif if (code_seen('Y')) destination[Y_AXIS] = code_value_axis_units(Y_AXIS); - #ifdef FILAMENTCHANGE_YPOS - else destination[Y_AXIS] = FILAMENTCHANGE_YPOS; + #ifdef FILAMENT_CHANGE_Y_POS + else destination[Y_AXIS] = FILAMENT_CHANGE_Y_POS; #endif - RUNPLAN; + RUNPLAN(FILAMENT_CHANGE_XY_FEEDRATE); - if (code_seen('L')) destination[E_AXIS] += code_value_axis_units(E_AXIS); - #ifdef FILAMENTCHANGE_FINALRETRACT - else destination[E_AXIS] += FILAMENTCHANGE_FINALRETRACT; - #endif - - RUNPLAN; - - //finish moves stepper.synchronize(); - //disable extruder steppers so filament can be removed + lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_UNLOAD); + + // Unload filament + if (code_seen('L')) destination[E_AXIS] += code_value_axis_units(E_AXIS); + #if defined(FILAMENT_CHANGE_UNLOAD_LENGTH) && FILAMENT_CHANGE_UNLOAD_LENGTH > 0 + else destination[E_AXIS] -= FILAMENT_CHANGE_UNLOAD_LENGTH; + #endif + + RUNPLAN(FILAMENT_CHANGE_UNLOAD_FEEDRATE); + + // Synchronize steppers and then disable extruders steppers for manual filament changing + stepper.synchronize(); disable_e0(); disable_e1(); disable_e2(); disable_e3(); delay(100); - LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE); - #if DISABLED(AUTO_FILAMENT_CHANGE) - millis_t next_tick = 0; - #endif - KEEPALIVE_STATE(PAUSED_FOR_USER); + + millis_t next_tick = 0; + + // Wait for filament insert by user and press button + lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INSERT); + while (!lcd_clicked()) { - #if DISABLED(AUTO_FILAMENT_CHANGE) + #if HAS_BUZZER millis_t ms = millis(); - if (ELAPSED(ms, next_tick)) { - lcd_quick_feedback(); - next_tick = ms + 2500UL; // feedback every 2.5s while waiting + if (ms >= next_tick) { + buzzer.tone(300, 2000); + next_tick = ms + 2500; // Beep every 2.5s while waiting } - idle(true); - #else - current_position[E_AXIS] += AUTO_FILAMENT_CHANGE_LENGTH; - destination[E_AXIS] = current_position[E_AXIS]; - line_to_destination(AUTO_FILAMENT_CHANGE_FEEDRATE); - stepper.synchronize(); #endif - } // while(!lcd_clicked) - KEEPALIVE_STATE(IN_HANDLER); - lcd_quick_feedback(); // click sound feedback + idle(true); + } + delay(100); + while (lcd_clicked()) idle(true); + delay(100); - #if ENABLED(AUTO_FILAMENT_CHANGE) - current_position[E_AXIS] = 0; - stepper.synchronize(); - #endif + // Show load message + lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_LOAD); - //return to normal + // Load filament if (code_seen('L')) destination[E_AXIS] -= code_value_axis_units(E_AXIS); - #ifdef FILAMENTCHANGE_FINALRETRACT - else destination[E_AXIS] -= FILAMENTCHANGE_FINALRETRACT; + #if defined(FILAMENT_CHANGE_LOAD_LENGTH) && FILAMENT_CHANGE_LOAD_LENGTH > 0 + else destination[E_AXIS] += FILAMENT_CHANGE_LOAD_LENGTH; #endif - current_position[E_AXIS] = destination[E_AXIS]; //the long retract of L is compensated by manual filament feeding - sync_plan_position_e(); + RUNPLAN(FILAMENT_CHANGE_LOAD_FEEDRATE); + stepper.synchronize(); - RUNPLAN; //should do nothing + #if defined(FILAMENT_CHANGE_EXTRUDE_LENGTH) && FILAMENT_CHANGE_EXTRUDE_LENGTH > 0 + do { + // Extrude filament to get into hotend + lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_EXTRUDE); + destination[E_AXIS] += FILAMENT_CHANGE_EXTRUDE_LENGTH; + RUNPLAN(FILAMENT_CHANGE_EXTRUDE_FEEDRATE); + stepper.synchronize(); + // Ask user if more filament should be extruded + KEEPALIVE_STATE(PAUSED_FOR_USER); + lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_OPTION); + while (filament_change_menu_response == FILAMENT_CHANGE_RESPONSE_WAIT_FOR) idle(true); + KEEPALIVE_STATE(IN_HANDLER); + } while (filament_change_menu_response != FILAMENT_CHANGE_RESPONSE_RESUME_PRINT); + #endif - lcd_reset_alert_level(); + lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_RESUME); + + KEEPALIVE_STATE(IN_HANDLER); + + // Set extruder to saved position + current_position[E_AXIS] = lastpos[E_AXIS]; + destination[E_AXIS] = lastpos[E_AXIS]; + planner.set_e_position_mm(current_position[E_AXIS]); #if ENABLED(DELTA) // Move XYZ to starting position, then E calculate_delta(lastpos); - planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], fr60, active_extruder); - planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], lastpos[E_AXIS], fr60, active_extruder); + planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], FILAMENT_CHANGE_XY_FEEDRATE, active_extruder); + planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], lastpos[E_AXIS], FILAMENT_CHANGE_XY_FEEDRATE, active_extruder); #else // Move XY to starting position, then Z, then E destination[X_AXIS] = lastpos[X_AXIS]; destination[Y_AXIS] = lastpos[Y_AXIS]; - line_to_destination(); + RUNPLAN(FILAMENT_CHANGE_XY_FEEDRATE); destination[Z_AXIS] = lastpos[Z_AXIS]; - line_to_destination(); - destination[E_AXIS] = lastpos[E_AXIS]; - line_to_destination(); + RUNPLAN(FILAMENT_CHANGE_Z_FEEDRATE); #endif + stepper.synchronize(); #if ENABLED(FILAMENT_RUNOUT_SENSOR) filament_ran_out = false; #endif + // Show status screen + lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_STATUS); } -#endif // FILAMENTCHANGEENABLE +#endif // FILAMENT_CHANGE_FEATURE #if ENABLED(DUAL_X_CARRIAGE) @@ -6464,11 +6499,11 @@ inline void gcode_T(uint8_t tmp_extruder) { #if HOTENDS > 1 - float stored_feedrate = feedrate; + float old_feedrate = feedrate; if (code_seen('F')) { float next_feedrate = code_value_axis_units(X_AXIS); - if (next_feedrate > 0.0) stored_feedrate = feedrate = next_feedrate; + if (next_feedrate > 0.0) old_feedrate = feedrate = next_feedrate; } else feedrate = XY_PROBE_FEEDRATE; @@ -6624,7 +6659,7 @@ inline void gcode_T(uint8_t tmp_extruder) { enable_solenoid_on_active_extruder(); #endif // EXT_SOLENOID - feedrate = stored_feedrate; + feedrate = old_feedrate; #else // !HOTENDS > 1 @@ -7232,11 +7267,11 @@ void process_next_command() { break; #endif // HAS_BED_PROBE - #if ENABLED(FILAMENTCHANGEENABLE) + #if ENABLED(FILAMENT_CHANGE_FEATURE) case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] gcode_M600(); break; - #endif // FILAMENTCHANGEENABLE + #endif // FILAMENT_CHANGE_FEATURE #if ENABLED(DUAL_X_CARRIAGE) case 605: @@ -7993,14 +8028,14 @@ void disable_all_steppers() { * Standard idle routine keeps the machine alive */ void idle( - #if ENABLED(FILAMENTCHANGEENABLE) + #if ENABLED(FILAMENT_CHANGE_FEATURE) bool no_stepper_sleep/*=false*/ #endif ) { lcd_update(); host_keepalive(); manage_inactivity( - #if ENABLED(FILAMENTCHANGEENABLE) + #if ENABLED(FILAMENT_CHANGE_FEATURE) no_stepper_sleep #endif ); diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index ad8ca867ed..941821be2f 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -124,8 +124,8 @@ /** * Filament Change with Extruder Runout Prevention */ -#if ENABLED(FILAMENTCHANGEENABLE) && ENABLED(EXTRUDER_RUNOUT_PREVENT) - #error "EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE." +#if ENABLED(FILAMENT_CHANGE_FEATURE) && ENABLED(EXTRUDER_RUNOUT_PREVENT) + #error "EXTRUDER_RUNOUT_PREVENT is incompatible with FILAMENT_CHANGE_FEATURE." #endif /** @@ -623,6 +623,8 @@ #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead." #elif defined(SERVO_DEACTIVATION_DELAY) #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead." +#elif ENABLED(FILAMENTCHANGEENABLE) + #error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration." #endif #endif //SANITYCHECK_H diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index d514288d74..ffad119958 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index b4062e8e66..8956c41cd1 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h index d86b8c0e36..704b20ce40 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h @@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index ae64887421..1a00bb3761 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -557,16 +557,30 @@ const unsigned int dropsegments = 2; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 7b608f80a8..e1280f2d2e 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 58d36231b9..475e0335a4 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h index 11b9e6c1d1..1a6ab806ac 100644 --- a/Marlin/example_configurations/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h @@ -559,16 +559,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - #define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - //#define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - //#define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - //#define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index b4062e8e66..8956c41cd1 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h index 1978c09277..894e861633 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h @@ -553,16 +553,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index f673a200ba..fba00960a2 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -553,16 +553,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 93e9e30d6d..7265b76284 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -552,16 +552,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index f417a57e45..69eb9ce956 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -557,16 +557,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index bcbf1c1b12..f224fd60e7 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -553,16 +553,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 7b7b4f9b7d..857f320e46 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index d58dbb37c1..69ee6e04b5 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of // Add support for experimental filament exchange support M600; requires display #if ENABLED(ULTIPANEL) - //#define FILAMENTCHANGEENABLE - #if ENABLED(FILAMENTCHANGEENABLE) - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD - #define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop - #define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop + // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too) + #if ENABLED(FILAMENT_CHANGE_FEATURE) + #define FILAMENT_CHANGE_X_POS 3 // X position of hotend + #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend + #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift) + #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) + #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm + // It is a short retract used immediately after print interrupt before move to filament exchange position + #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm + // Longer length for bowden printers to unload filament from whole bowden tube, + // shorter lenght for printers without bowden to unload filament from extruder only, + // 0 to disable unloading for manual unloading + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm + // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, + // Short or zero length for printers without bowden where loading is not used + #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast + #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, + // 0 to disable for manual extrusion + // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, + // or until outcoming filament color is not clear for filament color change + #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #endif #endif diff --git a/Marlin/language_cz.h b/Marlin/language_cz.h index cc8508e146..730ad62178 100644 --- a/Marlin/language_cz.h +++ b/Marlin/language_cz.h @@ -200,4 +200,27 @@ #define MSG_DELTA_CALIBRATE_Z "Kalibrovat Z" #define MSG_DELTA_CALIBRATE_CENTER "Kalibrovat Stred" +#define MSG_FILAMENT_CHANGE_HEADER "VYMENA FILAMENTU" +#define MSG_FILAMENT_CHANGE_INIT_1 "Cekejte prosim" +#define MSG_FILAMENT_CHANGE_INIT_2 "na zahajeni" +#define MSG_FILAMENT_CHANGE_INIT_3 "vymeny filamentu" +#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Cekejte prosim" +#define MSG_FILAMENT_CHANGE_UNLOAD_2 "na vysunuti" +#define MSG_FILAMENT_CHANGE_UNLOAD_3 "filamentu" +#define MSG_FILAMENT_CHANGE_INSERT_1 "Vlozte filament" +#define MSG_FILAMENT_CHANGE_INSERT_2 "a stisknete" +#define MSG_FILAMENT_CHANGE_INSERT_3 "tlacitko..." +#define MSG_FILAMENT_CHANGE_LOAD_1 "Cekejte prosim" +#define MSG_FILAMENT_CHANGE_LOAD_2 "na zavedeni" +#define MSG_FILAMENT_CHANGE_LOAD_3 "filamentu" +#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Cekejte prosim" +#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "na vytlaceni" +#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "filamentu" +#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CO DAL?" +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Jeste vytlacit" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Obnovit tisk" +#define MSG_FILAMENT_CHANGE_RESUME_1 "Cekejte prosim" +#define MSG_FILAMENT_CHANGE_RESUME_2 "na pokracovani" +#define MSG_FILAMENT_CHANGE_RESUME_3 "tisku" + #endif // LANGUAGE_CZ_H diff --git a/Marlin/language_en.h b/Marlin/language_en.h index 1e9c955cb8..fb21bb03e0 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -563,4 +563,71 @@ #define MSG_INFO_PSU "Power Supply" #endif +#ifndef MSG_FILAMENT_CHANGE_HEADER + #define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT" +#endif +#ifndef MSG_FILAMENT_CHANGE_INIT_1 + #define MSG_FILAMENT_CHANGE_INIT_1 "Wait for start" +#endif +#ifndef MSG_FILAMENT_CHANGE_INIT_2 + #define MSG_FILAMENT_CHANGE_INIT_2 "of the filament" +#endif +#ifndef MSG_FILAMENT_CHANGE_INIT_3 + #define MSG_FILAMENT_CHANGE_INIT_3 "change" +#endif +#ifndef MSG_FILAMENT_CHANGE_UNLOAD_1 + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wait for" +#endif +#ifndef MSG_FILAMENT_CHANGE_UNLOAD_2 + #define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload" +#endif +#ifndef MSG_FILAMENT_CHANGE_UNLOAD_3 + #define MSG_FILAMENT_CHANGE_UNLOAD_3 "" +#endif +#ifndef MSG_FILAMENT_CHANGE_INSERT_1 + #define MSG_FILAMENT_CHANGE_INSERT_1 "Insert filament" +#endif +#ifndef MSG_FILAMENT_CHANGE_INSERT_2 + #define MSG_FILAMENT_CHANGE_INSERT_2 "and press button" +#endif +#ifndef MSG_FILAMENT_CHANGE_INSERT_3 + #define MSG_FILAMENT_CHANGE_INSERT_3 "to continue..." +#endif +#ifndef MSG_FILAMENT_CHANGE_LOAD_1 + #define MSG_FILAMENT_CHANGE_LOAD_1 "Wait for" +#endif +#ifndef MSG_FILAMENT_CHANGE_LOAD_2 + #define MSG_FILAMENT_CHANGE_LOAD_2 "filament load" +#endif +#ifndef MSG_FILAMENT_CHANGE_LOAD_3 + #define MSG_FILAMENT_CHANGE_LOAD_3 "" +#endif +#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1 + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wait for" +#endif +#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_2 + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude" +#endif +#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_3 + #define MSG_FILAMENT_CHANGE_EXTRUDE_3 "" +#endif +#ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER + #define MSG_FILAMENT_CHANGE_OPTION_HEADER "WHAT NEXT?" +#endif +#ifndef MSG_FILAMENT_CHANGE_OPTION_EXTRUDE + #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more" +#endif +#ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME + #define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print" +#endif +#ifndef MSG_FILAMENT_CHANGE_RESUME_1 + #define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print" +#endif +#ifndef MSG_FILAMENT_CHANGE_RESUME_2 + #define MSG_FILAMENT_CHANGE_RESUME_2 "to resume" +#endif +#ifndef MSG_FILAMENT_CHANGE_RESUME_3 + #define MSG_FILAMENT_CHANGE_RESUME_3 "" +#endif + #endif // LANGUAGE_EN_H diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 11c998b4bb..a495a28a50 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -128,7 +128,17 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to static void lcd_info_thermistors_menu(); static void lcd_info_board_menu(); static void lcd_info_menu(); - #endif + #endif // LCD_INFO_MENU + + #if ENABLED(FILAMENT_CHANGE_FEATURE) + static void lcd_filament_change_option_menu(); + static void lcd_filament_change_init_message(); + static void lcd_filament_change_unload_message(); + static void lcd_filament_change_insert_message(); + static void lcd_filament_change_load_message(); + static void lcd_filament_change_extrude_message(); + static void lcd_filament_change_resume_message(); + #endif #if HAS_LCD_CONTRAST static void lcd_set_contrast(); @@ -791,7 +801,7 @@ static void lcd_status_screen() { // // Change filament // - #if ENABLED(FILAMENTCHANGEENABLE) + #if ENABLED(FILAMENT_CHANGE_FEATURE) MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600")); #endif @@ -2036,6 +2046,116 @@ static void lcd_status_screen() { } #endif // LCD_INFO_MENU + #if ENABLED(FILAMENT_CHANGE_FEATURE) + + static void lcd_filament_change_nothing() { + } + + static void lcd_filament_change_resume_print() { + filament_change_menu_response = FILAMENT_CHANGE_RESPONSE_RESUME_PRINT; + lcdDrawUpdate = 2; + lcd_goto_screen(lcd_status_screen); + } + + static void lcd_filament_change_extrude_more() { + filament_change_menu_response = FILAMENT_CHANGE_RESPONSE_EXTRUDE_MORE; + } + + static void lcd_filament_change_option_menu() { + START_MENU(); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_HEADER, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_RESUME, lcd_filament_change_resume_print); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_EXTRUDE, lcd_filament_change_extrude_more); + END_MENU(); + } + + static void lcd_filament_change_init_message() { + START_MENU(); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_HEADER, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_INIT_1, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_INIT_2, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_INIT_3, lcd_filament_change_nothing); + END_MENU(); + } + + static void lcd_filament_change_unload_message() { + START_MENU(); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_HEADER, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_UNLOAD_1, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_UNLOAD_2, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_UNLOAD_3, lcd_filament_change_nothing); + END_MENU(); + } + + static void lcd_filament_change_insert_message() { + START_MENU(); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_HEADER, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_INSERT_1, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_INSERT_2, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_INSERT_3, lcd_filament_change_nothing); + END_MENU(); + } + + static void lcd_filament_change_load_message() { + START_MENU(); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_HEADER, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_LOAD_1, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_LOAD_2, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_LOAD_3, lcd_filament_change_nothing); + END_MENU(); + } + + static void lcd_filament_change_extrude_message() { + START_MENU(); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_HEADER, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_EXTRUDE_1, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_EXTRUDE_2, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_EXTRUDE_3, lcd_filament_change_nothing); + END_MENU(); + } + + static void lcd_filament_change_resume_message() { + START_MENU(); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_HEADER, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_RESUME_1, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_RESUME_2, lcd_filament_change_nothing); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_RESUME_3, lcd_filament_change_nothing); + END_MENU(); + } + + void lcd_filament_change_show_message(FilamentChangeMessage message) { + switch (message) { + case FILAMENT_CHANGE_MESSAGE_INIT: + defer_return_to_status = true; + lcd_goto_screen(lcd_filament_change_init_message); + break; + case FILAMENT_CHANGE_MESSAGE_UNLOAD: + lcd_goto_screen(lcd_filament_change_unload_message); + break; + case FILAMENT_CHANGE_MESSAGE_INSERT: + lcd_goto_screen(lcd_filament_change_insert_message); + break; + case FILAMENT_CHANGE_MESSAGE_LOAD: + lcd_goto_screen(lcd_filament_change_load_message); + break; + case FILAMENT_CHANGE_MESSAGE_EXTRUDE: + lcd_goto_screen(lcd_filament_change_extrude_message); + break; + case FILAMENT_CHANGE_MESSAGE_OPTION: + filament_change_menu_response = FILAMENT_CHANGE_RESPONSE_WAIT_FOR; + lcd_goto_screen(lcd_filament_change_option_menu); + break; + case FILAMENT_CHANGE_MESSAGE_RESUME: + lcd_goto_screen(lcd_filament_change_resume_message); + break; + case FILAMENT_CHANGE_MESSAGE_STATUS: + lcd_return_to_status(); + break; + } + } + + #endif // FILAMENT_CHANGE_FEATURE + /** * * Functions for editing single values diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index 8e7e2ee5fa..fd5c4fc572 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -69,6 +69,21 @@ void lcd_quick_feedback(); // Audible feedback for a button click - could also be visual bool lcd_clicked(); void lcd_ignore_click(bool b=true); + + #if ENABLED(FILAMENT_CHANGE_FEATURE) + enum FilamentChangeMessage { + FILAMENT_CHANGE_MESSAGE_INIT, + FILAMENT_CHANGE_MESSAGE_UNLOAD, + FILAMENT_CHANGE_MESSAGE_INSERT, + FILAMENT_CHANGE_MESSAGE_LOAD, + FILAMENT_CHANGE_MESSAGE_EXTRUDE, + FILAMENT_CHANGE_MESSAGE_OPTION, + FILAMENT_CHANGE_MESSAGE_RESUME, + FILAMENT_CHANGE_MESSAGE_STATUS + }; + void lcd_filament_change_show_message(FilamentChangeMessage message); + #endif // FILAMENT_CHANGE_FEATURE + #else FORCE_INLINE void lcd_buttons_update() {} #endif