From 45488a431ab09fa6a2c898b83fed27e27d23f13a Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Sun, 7 Jun 2020 21:51:38 -0500
Subject: [PATCH] Clean up whitespace

---
 Marlin/src/gcode/config/M672.cpp              |   4 +-
 .../PlatformIO/variants/MEEB_3DP/board.cpp    | 129 +++++++++---------
 .../variants/MEEB_3DP/wirish/boards.cpp       |   4 +-
 .../variants/MEEB_3DP/wirish/boards_setup.cpp |  24 ++--
 4 files changed, 80 insertions(+), 81 deletions(-)

diff --git a/Marlin/src/gcode/config/M672.cpp b/Marlin/src/gcode/config/M672.cpp
index cc160bde665..96204899edd 100644
--- a/Marlin/src/gcode/config/M672.cpp
+++ b/Marlin/src/gcode/config/M672.cpp
@@ -51,8 +51,8 @@
  *   Marlin: M672 R
  */
 
-#define M672_PROGBYTE    105								// magic byte to start programming custom sensitivity
-#define M672_ERASEBYTE   131								// magic byte to clear custom sensitivity
+#define M672_PROGBYTE    105                // magic byte to start programming custom sensitivity
+#define M672_ERASEBYTE   131                // magic byte to clear custom sensitivity
 
 //
 // Smart Effector byte send protocol:
diff --git a/buildroot/share/PlatformIO/variants/MEEB_3DP/board.cpp b/buildroot/share/PlatformIO/variants/MEEB_3DP/board.cpp
index 9a678c01e79..5ddeb1f1d9e 100644
--- a/buildroot/share/PlatformIO/variants/MEEB_3DP/board.cpp
+++ b/buildroot/share/PlatformIO/variants/MEEB_3DP/board.cpp
@@ -53,10 +53,9 @@
 // function out, as we do here.
 
 void boardInit(void) {
-    // afio_remap(AFIO_REMAP_I2C1);
+  // afio_remap(AFIO_REMAP_I2C1);
 }
 
-
 // Pin map: this lets the basic I/O functions (digitalWrite(),
 // analogRead(), pwmWrite()) translate from pin numbers to STM32
 // peripherals.
@@ -72,86 +71,86 @@ void boardInit(void) {
 // - ADC channel, or ADCx if none
 
 extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
-/*
-    gpio_dev *gpio_device;      GPIO device
-    timer_dev *timer_device;    Pin's timer device, if any.
-    const adc_dev *adc_device;  ADC device, if any.
-    uint8 gpio_bit;             Pin's GPIO port bit.
-    uint8 timer_channel;        Timer channel, or 0 if none.
-    uint8 adc_channel;          Pin ADC channel, or ADCx if none.
-*/
+  /*
+  gpio_dev *gpio_device;      GPIO device
+  timer_dev *timer_device;    Pin's timer device, if any.
+  const adc_dev *adc_device;  ADC device, if any.
+  uint8 gpio_bit;             Pin's GPIO port bit.
+  uint8 timer_channel;        Timer channel, or 0 if none.
+  uint8 adc_channel;          Pin ADC channel, or ADCx if none.
+  */
 
-    {&gpioa, &timer2, &adc1,  0, 1,    0}, /* PA0 */
-    {&gpioa, &timer2, &adc1,  1, 2,    1}, /* PA1 */
-	{&gpioa, &timer2, &adc1,  2, 3,    2}, /* PA2 */
-    {&gpioa, &timer2, &adc1,  3, 4,    3}, /* PA3 */
-	{&gpioa,   NULL, &adc1,  4, 0,    4}, /* PA4 */
-    {&gpioa,   NULL, &adc1,  5, 0,    5}, /* PA5 */
-    {&gpioa, &timer3, &adc1,  6, 1,    6}, /* PA6 */
-    {&gpioa, &timer3, &adc1,  7, 2,    7}, /* PA7 */
-    {&gpioa, &timer1, NULL,  8, 1, ADCx}, /* PA8 */
-    {&gpioa, &timer1, NULL,  9, 2, ADCx}, /* PA9 */
-    {&gpioa, &timer1, NULL, 10, 3, ADCx}, /* PA10 */
-    {&gpioa,   NULL, NULL, 11, 0, ADCx}, /* PA11 */
-    {&gpioa,   NULL, NULL, 12, 0, ADCx}, /* PA12 */
-    {&gpioa,   NULL, NULL, 13, 0, ADCx}, /* PA13 */
-    {&gpioa,   NULL, NULL, 14, 0, ADCx}, /* PA14 */
-    {&gpioa,   NULL, NULL, 15, 0, ADCx}, /* PA15 */
+  {&gpioa, &timer2, &adc1,  0, 1,    0}, /* PA0 */
+  {&gpioa, &timer2, &adc1,  1, 2,    1}, /* PA1 */
+  {&gpioa, &timer2, &adc1,  2, 3,    2}, /* PA2 */
+  {&gpioa, &timer2, &adc1,  3, 4,    3}, /* PA3 */
+  {&gpioa,   NULL, &adc1,  4, 0,    4}, /* PA4 */
+  {&gpioa,   NULL, &adc1,  5, 0,    5}, /* PA5 */
+  {&gpioa, &timer3, &adc1,  6, 1,    6}, /* PA6 */
+  {&gpioa, &timer3, &adc1,  7, 2,    7}, /* PA7 */
+  {&gpioa, &timer1, NULL,  8, 1, ADCx}, /* PA8 */
+  {&gpioa, &timer1, NULL,  9, 2, ADCx}, /* PA9 */
+  {&gpioa, &timer1, NULL, 10, 3, ADCx}, /* PA10 */
+  {&gpioa,   NULL, NULL, 11, 0, ADCx}, /* PA11 */
+  {&gpioa,   NULL, NULL, 12, 0, ADCx}, /* PA12 */
+  {&gpioa,   NULL, NULL, 13, 0, ADCx}, /* PA13 */
+  {&gpioa,   NULL, NULL, 14, 0, ADCx}, /* PA14 */
+  {&gpioa,   NULL, NULL, 15, 0, ADCx}, /* PA15 */
 
-	{&gpiob, &timer3, &adc1,  0, 3,    8}, /* PB0 */
-	{&gpiob, &timer3, &adc1,  1, 4,    9}, /* PB1 */
-	{&gpiob,   NULL, NULL,  2, 0, ADCx}, /* PB2  */
-	{&gpiob,   NULL, NULL,  3, 0, ADCx}, /* PB3  */
-    {&gpiob,   NULL, NULL,  4, 0, ADCx}, /* PB4  */
-    {&gpiob,   NULL, NULL,  5, 0, ADCx}, /* PB5 */
-    {&gpiob, &timer4, NULL,  6, 1, ADCx}, /* PB6 */
-    {&gpiob, &timer4, NULL,  7, 2, ADCx}, /* PB7 */
-    {&gpiob, &timer4, NULL,  8, 3, ADCx}, /* PB8 */
-	{&gpiob,   NULL, NULL,  9, 0, ADCx}, /* PB9 */
-    {&gpiob,   NULL, NULL, 10, 0, ADCx}, /* PB10 */
-    {&gpiob,   NULL, NULL, 11, 0, ADCx}, /* PB11 */
-    {&gpiob,   NULL, NULL, 12, 0, ADCx}, /* PB12 */
-    {&gpiob,   NULL, NULL, 13, 0, ADCx}, /* PB13 */
-    {&gpiob,   NULL, NULL, 14, 0, ADCx}, /* PB14 */
-    {&gpiob,   NULL, NULL, 15, 0, ADCx}, /* PB15 */
+  {&gpiob, &timer3, &adc1,  0, 3,    8}, /* PB0 */
+  {&gpiob, &timer3, &adc1,  1, 4,    9}, /* PB1 */
+  {&gpiob,   NULL, NULL,  2, 0, ADCx}, /* PB2  */
+  {&gpiob,   NULL, NULL,  3, 0, ADCx}, /* PB3  */
+  {&gpiob,   NULL, NULL,  4, 0, ADCx}, /* PB4  */
+  {&gpiob,   NULL, NULL,  5, 0, ADCx}, /* PB5 */
+  {&gpiob, &timer4, NULL,  6, 1, ADCx}, /* PB6 */
+  {&gpiob, &timer4, NULL,  7, 2, ADCx}, /* PB7 */
+  {&gpiob, &timer4, NULL,  8, 3, ADCx}, /* PB8 */
+  {&gpiob,   NULL, NULL,  9, 0, ADCx}, /* PB9 */
+  {&gpiob,   NULL, NULL, 10, 0, ADCx}, /* PB10 */
+  {&gpiob,   NULL, NULL, 11, 0, ADCx}, /* PB11 */
+  {&gpiob,   NULL, NULL, 12, 0, ADCx}, /* PB12 */
+  {&gpiob,   NULL, NULL, 13, 0, ADCx}, /* PB13 */
+  {&gpiob,   NULL, NULL, 14, 0, ADCx}, /* PB14 */
+  {&gpiob,   NULL, NULL, 15, 0, ADCx}, /* PB15 */
 
 
-    {&gpioc,   NULL, &adc1,  0, 0,   10}, /* PC0 */
-    {&gpioc,   NULL, &adc1,  1, 0,   11}, /* PC1 */
-    {&gpioc,   NULL, &adc1,  2, 0,   12}, /* PC2 */
-    {&gpioc,   NULL, &adc1,  3, 0,   13}, /* PC3 */
-    {&gpioc,   NULL, &adc1,  4, 0,   14}, /* PC4 */
-    {&gpioc,   NULL, &adc1,  5, 0,   15}, /* PC5 */
-    {&gpioc, &timer8, NULL,  6, 1, ADCx}, /* PC6 */
-	{&gpioc, &timer8, NULL,  7, 2, ADCx}, /* PC7 */
-    {&gpioc, &timer8, NULL,  8, 3, ADCx}, /* PC8 */
-    {&gpioc, &timer8, NULL,  9, 4, ADCx}, /* PC9 */
-    {&gpioc,   NULL, NULL, 10, 0, ADCx}, /* PC10 UART4_TX/SDIO_D2 */
-    {&gpioc,   NULL, NULL, 11, 0, ADCx}, /* PC11 UART4_RX/SDIO_D3 */
-    {&gpioc,   NULL, NULL, 12, 0, ADCx}, /* PC12 UART5_TX/SDIO_CK */
-    {&gpioc,   NULL, NULL, 13, 0, ADCx}, /* PC13 TAMPER-RTC */
-    {&gpioc,   NULL, NULL, 14, 0, ADCx}, /* PC14 OSC32_IN */
-    {&gpioc,   NULL, NULL, 15, 0, ADCx}, /* PC15 OSC32_OUT */
+  {&gpioc,   NULL, &adc1,  0, 0,   10}, /* PC0 */
+  {&gpioc,   NULL, &adc1,  1, 0,   11}, /* PC1 */
+  {&gpioc,   NULL, &adc1,  2, 0,   12}, /* PC2 */
+  {&gpioc,   NULL, &adc1,  3, 0,   13}, /* PC3 */
+  {&gpioc,   NULL, &adc1,  4, 0,   14}, /* PC4 */
+  {&gpioc,   NULL, &adc1,  5, 0,   15}, /* PC5 */
+  {&gpioc, &timer8, NULL,  6, 1, ADCx}, /* PC6 */
+  {&gpioc, &timer8, NULL,  7, 2, ADCx}, /* PC7 */
+  {&gpioc, &timer8, NULL,  8, 3, ADCx}, /* PC8 */
+  {&gpioc, &timer8, NULL,  9, 4, ADCx}, /* PC9 */
+  {&gpioc,   NULL, NULL, 10, 0, ADCx}, /* PC10 UART4_TX/SDIO_D2 */
+  {&gpioc,   NULL, NULL, 11, 0, ADCx}, /* PC11 UART4_RX/SDIO_D3 */
+  {&gpioc,   NULL, NULL, 12, 0, ADCx}, /* PC12 UART5_TX/SDIO_CK */
+  {&gpioc,   NULL, NULL, 13, 0, ADCx}, /* PC13 TAMPER-RTC */
+  {&gpioc,   NULL, NULL, 14, 0, ADCx}, /* PC14 OSC32_IN */
+  {&gpioc,   NULL, NULL, 15, 0, ADCx}, /* PC15 OSC32_OUT */
 
-	{&gpiod,   NULL, NULL,   0, 0, ADCx} , /* PD0 OSC_IN */
-	{&gpiod,   NULL, NULL,   1, 0, ADCx} , /* PD1  OSC_OUT */
-	{&gpiod,   NULL, NULL,   2, 0, ADCx} , /* PD2  TIM3_ETR/UART5_RX SDIO_CMD */
+  {&gpiod,   NULL, NULL,   0, 0, ADCx} , /* PD0 OSC_IN */
+  {&gpiod,   NULL, NULL,   1, 0, ADCx} , /* PD1  OSC_OUT */
+  {&gpiod,   NULL, NULL,   2, 0, ADCx} , /* PD2  TIM3_ETR/UART5_RX SDIO_CMD */
 };
 
 /*  Basically everything that is defined as having a timer us PWM */
 extern const uint8 boardPWMPins[BOARD_NR_PWM_PINS] __FLASH__ = {
-    PA0,PA1,PA2,PA3,PA6,PA7,PA8,PA9,PA10,PB0,PB1,PB6,PB7,PB8,PB9,PC6,PC7,PC8,PC9
+  PA0,PA1,PA2,PA3,PA6,PA7,PA8,PA9,PA10,PB0,PB1,PB6,PB7,PB8,PB9,PC6,PC7,PC8,PC9
 };
 
 /*  Basically everything that is defined having ADC */
 extern const uint8 boardADCPins[BOARD_NR_ADC_PINS] __FLASH__ = {
-    PA0,PA1,PA2,PA3,PA4,PA5,PA6,PA7,PB0,PB1,PC0,PC1,PC2,PC3,PC4,PC5
+  PA0,PA1,PA2,PA3,PA4,PA5,PA6,PA7,PB0,PB1,PC0,PC1,PC2,PC3,PC4,PC5
 };
 
 /* not sure what this us used for */
 extern const uint8 boardUsedPins[BOARD_NR_USED_PINS] __FLASH__ = {
-    BOARD_JTMS_SWDIO_PIN,
-    BOARD_JTCK_SWCLK_PIN, BOARD_JTDI_PIN, BOARD_JTDO_PIN, BOARD_NJTRST_PIN
+  BOARD_JTMS_SWDIO_PIN,
+  BOARD_JTCK_SWCLK_PIN, BOARD_JTDI_PIN, BOARD_JTDO_PIN, BOARD_NJTRST_PIN
 };
 
 DEFINE_HWSERIAL(Serial1, 1);
diff --git a/buildroot/share/PlatformIO/variants/MEEB_3DP/wirish/boards.cpp b/buildroot/share/PlatformIO/variants/MEEB_3DP/wirish/boards.cpp
index feb287d6f39..12321229def 100644
--- a/buildroot/share/PlatformIO/variants/MEEB_3DP/wirish/boards.cpp
+++ b/buildroot/share/PlatformIO/variants/MEEB_3DP/wirish/boards.cpp
@@ -145,9 +145,9 @@ static void setup_clocks(void) {
  * at the Flash base address, 0x08000000.
  */
 #if defined(BOOTLOADER_maple)
-	#define USER_ADDR_ROM 0x08002000
+  #define USER_ADDR_ROM 0x08002000
 #else
-	#define USER_ADDR_ROM 0x08000000
+  #define USER_ADDR_ROM 0x08000000
 #endif
 #define USER_ADDR_RAM 0x20000C00
 extern char __text_start__;
diff --git a/buildroot/share/PlatformIO/variants/MEEB_3DP/wirish/boards_setup.cpp b/buildroot/share/PlatformIO/variants/MEEB_3DP/wirish/boards_setup.cpp
index 3e534dc3c9b..44418a52a47 100644
--- a/buildroot/share/PlatformIO/variants/MEEB_3DP/wirish/boards_setup.cpp
+++ b/buildroot/share/PlatformIO/variants/MEEB_3DP/wirish/boards_setup.cpp
@@ -68,12 +68,12 @@ namespace wirish {
             rcc_set_prescaler(RCC_PRESCALER_AHB, RCC_AHB_SYSCLK_DIV_1);
             rcc_set_prescaler(RCC_PRESCALER_APB1, RCC_APB1_HCLK_DIV_2);
             rcc_set_prescaler(RCC_PRESCALER_APB2, RCC_APB2_HCLK_DIV_1);
-			rcc_clk_disable(RCC_USB);
-			#if F_CPU == 72000000
-			rcc_set_prescaler(RCC_PRESCALER_USB, RCC_USB_SYSCLK_DIV_1_5);
-			#elif F_CPU == 48000000
-			rcc_set_prescaler(RCC_PRESCALER_USB, RCC_USB_SYSCLK_DIV_1);
-			#endif
+            rcc_clk_disable(RCC_USB);
+            #if F_CPU == 72000000
+            rcc_set_prescaler(RCC_PRESCALER_USB, RCC_USB_SYSCLK_DIV_1_5);
+            #elif F_CPU == 48000000
+            rcc_set_prescaler(RCC_PRESCALER_USB, RCC_USB_SYSCLK_DIV_1);
+            #endif
         }
 
         __weak void board_setup_gpio(void) {
@@ -84,15 +84,15 @@ namespace wirish {
 #ifdef SERIAL_USB
 
 #ifdef GENERIC_BOOTLOADER
-			//Reset the USB interface on generic boards - developed by Victor PV
-			gpio_set_mode(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit, GPIO_OUTPUT_PP);
-			gpio_write_bit(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit,0);
+            //Reset the USB interface on generic boards - developed by Victor PV
+            gpio_set_mode(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit, GPIO_OUTPUT_PP);
+            gpio_write_bit(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit,0);
 
-			for(volatile unsigned int i=0;i<512;i++);// Only small delay seems to be needed, and USB pins will get configured in Serial.begin
-			gpio_set_mode(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit, GPIO_INPUT_FLOATING);
+            for(volatile unsigned int i=0;i<512;i++);// Only small delay seems to be needed, and USB pins will get configured in Serial.begin
+            gpio_set_mode(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit, GPIO_INPUT_FLOATING);
 #endif
 
-			Serial.begin();// Roger Clark. Changed SerialUSB to Serial for Arduino sketch compatibility
+            Serial.begin();// Roger Clark. Changed SerialUSB to Serial for Arduino sketch compatibility
 #endif
         }