From 46843bd927c59c498ac8c229f31728795688b79e Mon Sep 17 00:00:00 2001 From: Bo Herrmannsen Date: Sun, 11 Jan 2015 14:18:38 +0100 Subject: [PATCH] adding back notes on servo power --- Documentation/Hardware.md | 119 ------------------------------- Documentation/RampsServoPower.md | 9 +++ 2 files changed, 9 insertions(+), 119 deletions(-) delete mode 100644 Documentation/Hardware.md create mode 100644 Documentation/RampsServoPower.md diff --git a/Documentation/Hardware.md b/Documentation/Hardware.md deleted file mode 100644 index 26b03ae3fc..0000000000 --- a/Documentation/Hardware.md +++ /dev/null @@ -1,119 +0,0 @@ -# Supported Hardware - -__Please note:__ We need more feedback from users weather their board is actually working! - -Supported boards are listed under: [/Marlin/boards.h](/Marlin/boards.h) - - - - -##### RAMPS - -http://reprap.org/wiki/RAMPS - -``` -#define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2 -#define BOARD_RAMPS_13_EFB 33 // RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed) -#define BOARD_RAMPS_13_EEB 34 // RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed) -#define BOARD_RAMPS_13_EFF 35 // RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan) -#define BOARD_RAMPS_13_EEF 36 // RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Fan) -``` - -##### Generation 3 Electronics - -http://reprap.org/wiki/Generation_3_Electronics - -``` -#define BOARD_GEN3_PLUS 9 // Gen3+ -#define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics -``` - -##### Generation 6 Electronics - -http://reprap.org/wiki/Generation_6_Electronics - -``` -#define BOARD_GEN6 5 // Gen6 -#define BOARD_GEN6_DELUXE 51 // Gen6 deluxe -``` - -##### Generation 7 Electronics - -http://reprap.org/wiki/Generation_7_Electronics - -``` -#define BOARD_GEN7_CUSTOM 10 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics" -#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2 -#define BOARD_GEN7_13 12 // Gen7 v1.3 -#define BOARD_GEN7_14 13 // Gen7 v1.4 -``` - - -``` -#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0 -#define BOARD_SETHI 20 // Sethi 3D_1 -``` - -##### Sanguinololu - -http://reprap.org/wiki/Sanguinololu - -``` -#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2 -#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above - -``` - -##### Melzi - -http://reprap.org/wiki/Melzi - -``` -#define BOARD_MELZI 63 // Melzi -#define BOARD_MELZI_1284 66 // Melzi with ATmega1284 (MaKr3d version) -``` - -##### RUMBA - -http://reprap.org/wiki/RUMBA - -``` -#define BOARD_RUMBA 80 // Rumba -``` - -##### Azteeg - - - http://reprap.org/wiki/Azteeg_X1 - - http://reprap.org/wiki/Azteeg_X3 - - -``` -#define BOARD_AZTEEG_X1 65 // Azteeg X1 -#define BOARD_AZTEEG_X3 67 // Azteeg X3 -#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro -``` - -#### Others - -``` -#define BOARD_DUEMILANOVE_328P 4 // Duemilanove w/ ATMega328P pin assignment -#define BOARD_STB_11 64 // STB V1.1 -#define BOARD_ULTIMAKER 7 // Ultimaker -#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) -#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) -#define BOARD_3DRAG 77 // 3Drag Controller -#define BOARD_TEENSYLU 8 // Teensylu -#define BOARD_PRINTRBOARD 81 // Printrboard (AT90USB1286) -#define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646) -#define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286) -#define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286) - CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make -#define BOARD_MEGATRONICS 70 // Megatronics -#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0 -#define BOARD_MEGATRONICS_1 702 // Minitronics v1.0 -#define BOARD_OMCA_A 90 // Alpha OMCA board -#define BOARD_OMCA 91 // Final OMCA board -#define BOARD_RAMBO 301 // Rambo -#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3) -#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board -#define BOARD_LEAPFROG 999 // Leapfrog -``` diff --git a/Documentation/RampsServoPower.md b/Documentation/RampsServoPower.md new file mode 100644 index 0000000000..2f715cfd73 --- /dev/null +++ b/Documentation/RampsServoPower.md @@ -0,0 +1,9 @@ + + +__Note for RAMPS users:__ +---------------------- + +-By default, RAMPS have no power on servo bus (if you happen to have a multimeter, check the voltage on servo power pins). +-In order to get the servo working, you need to supply 5V to 5V pin.. You can do it using your power supply (if it has a 5V output) or jumping the "Vcc" from Arduino to the 5V RAMPS rail. +-These 2 pins are located just between the Reset Button and the yellow fuses... There are marks in the board showing 5V and VCC.. just connect them.. +-If jumping the arduino Vcc do RAMPS 5V rail, take care to not use a power hungry servo, otherwise you will cause a blackout in the arduino board ;-)