Extended condition macros (#13419)

Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2024-11-23 02:35:31 +00:00 · 2019-03-16 23:43:06 -05:00 · 2019-03-16 23:43:06 -05:00 · 49cf92dc36
commit 49cf92dc36
parent d20eab4f83
281 changed files with 1299 additions and 1288 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -218,7 +218,7 @@
 */
 //#define MAGNETIC_PARKING_EXTRUDER
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
  #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
  #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@ -1015,7 +1015,7 @@
  #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
@ -1108,7 +1108,7 @@
 */
 //#define DEBUG_LEVELING_FEATURE
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
  // Gradually reduce leveling correction until a set height is reached,
  // at which point movement will be level to the machine's XY plane.
  // The height can be set with M420 Z<height>
@ -1134,7 +1134,7 @@
 #endif
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  // Set the number of grid points per dimension.
  #define GRID_MAX_POINTS_X 3
@ -1203,7 +1203,7 @@
 * Points to probe for all 3-point Leveling procedures.
 * Override if the automatically selected points are inadequate.
 */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
  //#define PROBE_PT_1_X 15
  //#define PROBE_PT_1_Y 180
  //#define PROBE_PT_2_X 15
@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
  #define RGB_LED_R_PIN 34
  #define RGB_LED_G_PIN 43
  #define RGB_LED_B_PIN 35
@ -2066,7 +2066,7 @@
 *  - Change to green once print has finished
 *  - Turn off after the print has finished and the user has pushed a button
 */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
  #define PRINTER_EVENT_LEDS
 #endif
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -78,7 +78,7 @@
  #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
  //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
  #endif
@ -1035,7 +1035,7 @@
 // @section leveling
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
  // Override the mesh area if the automatic (max) area is too large
  //#define MESH_MIN_X MESH_INSET
  //#define MESH_MIN_Y MESH_INSET
@ -1654,7 +1654,7 @@
   */
  //#define SENSORLESS_PROBING // TMC2130 only
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
    #define X_STALL_SENSITIVITY  8
    #define Y_STALL_SENSITIVITY  8
    //#define Z_STALL_SENSITIVITY  8
--- a/Marlin/src/HAL/HAL_AVR/HAL.h
+++ b/Marlin/src/HAL/HAL_AVR/HAL.h
@ -182,7 +182,7 @@ FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t freque
 #define TIMER_OCR_0             OCR0A
 #define TIMER_COUNTER_0         TCNT0
-#define _CAT(a, ...) a ## __VA_ARGS__
+#define _CAT(a,V...) a##V
 #define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
 #define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
 #define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
--- a/Marlin/src/HAL/HAL_AVR/fastio_AVR.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio_AVR.h
@ -286,7 +286,7 @@ enum ClockSource2 : char {
  #define PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
 #endif
-#if PIN_EXISTS(FAN) || PIN_EXISTS(FAN1) || PIN_EXISTS(FAN2)
+#if ANY_PIN(FAN, FAN1, FAN2)
  #if PIN_EXISTS(FAN2)
    #define PWM_CHK_FAN_A(P) (P == FAN_PIN || P == FAN1_PIN || P == FAN2_PIN)
  #elif PIN_EXISTS(FAN1)
--- a/Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp
+++ b/Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp
@ -23,7 +23,7 @@
 #include "../../inc/MarlinConfig.h"
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 #include "../shared/persistent_store_api.h"
--- a/Marlin/src/HAL/HAL_ESP32/HAL.h
+++ b/Marlin/src/HAL/HAL_ESP32/HAL.h
@ -36,7 +36,7 @@
 #include <Arduino.h>
 #undef DISABLED
-#define DISABLED(b) (!_CAT(SWITCH_ENABLED_, b))
+#define DISABLED(V...) DO(DIS,&&,V)
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
--- a/Marlin/src/HAL/HAL_LINUX/spi_pins.h
+++ b/Marlin/src/HAL/HAL_LINUX/spi_pins.h
@ -23,7 +23,7 @@
 #include "src/core/macros.h"
-#if ENABLED(SDSUPPORT) && ENABLED(DOGLCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(SDSUPPORT, DOGLCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
  #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                            // needed due to the speed and mode requred for communicating with each device being different.
                            // This requirement can be removed if the SPI access to these devices is updated to use
--- a/Marlin/src/HAL/HAL_LPC1768/main.cpp
+++ b/Marlin/src/HAL/HAL_LPC1768/main.cpp
@ -98,7 +98,7 @@ void HAL_init() {
 // HAL idle task
 void HAL_idletask(void) {
-  #if ENABLED(SDSUPPORT) && ENABLED(SHARED_SD_CARD)
+  #if BOTH(SDSUPPORT, SHARED_SD_CARD)
    // If Marlin is using the SD card we need to lock it to prevent access from
    // a PC via USB.
    // Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but
--- a/Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp
+++ b/Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp
@ -55,7 +55,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
    uint8_t v = *value;
    // Save to either external EEPROM, program flash or Backup SRAM
-    #if ENABLED(SPI_EEPROM) || ENABLED(I2C_EEPROM)
+    #if EITHER(SPI_EEPROM, I2C_EEPROM)
      // EEPROM has only ~100,000 write cycles,
      // so only write bytes that have changed!
      uint8_t * const p = (uint8_t * const)pos;
@ -87,7 +87,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
  do {
    // Read from either external EEPROM, program flash or Backup SRAM
    const uint8_t c = (
-      #if ENABLED(SPI_EEPROM) || ENABLED(I2C_EEPROM)
+      #if EITHER(SPI_EEPROM, I2C_EEPROM)
        eeprom_read_byte((uint8_t*)pos)
      #elif DISABLED(EEPROM_EMULATED_WITH_SRAM)
        eeprom_buffered_read_byte(pos)
@ -105,7 +105,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
 }
 size_t PersistentStore::capacity() {
-  #if ENABLED(SPI_EEPROM) || ENABLED(I2C_EEPROM)
+  #if EITHER(SPI_EEPROM, I2C_EEPROM)
    return E2END + 1;
  #elif DISABLED(EEPROM_EMULATED_WITH_SRAM)
    return E2END + 1;
--- a/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp
+++ b/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp
@ -32,7 +32,7 @@
 #include "../../inc/MarlinConfig.h"
 // This is for EEPROM emulation in flash
-#if ENABLED(EEPROM_SETTINGS) && ENABLED(FLASH_EEPROM_EMULATION)
+#if BOTH(EEPROM_SETTINGS, FLASH_EEPROM_EMULATION)
 #include "../shared/persistent_store_api.h"
--- a/Marlin/src/HAL/shared/persistent_store_api.cpp
+++ b/Marlin/src/HAL/shared/persistent_store_api.cpp
@ -22,7 +22,7 @@
 */
 #include "../../inc/MarlinConfigPre.h"
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
  #include "persistent_store_api.h"
  PersistentStore persistentStore;
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@ -128,7 +128,7 @@
  #include "feature/bedlevel/bedlevel.h"
 #endif
-#if ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
+#if BOTH(ADVANCED_PAUSE_FEATURE, PAUSE_PARK_NO_STEPPER_TIMEOUT)
  #include "feature/pause.h"
 #endif
@ -152,7 +152,7 @@
  #include "feature/fanmux.h"
 #endif
-#if DO_SWITCH_EXTRUDER || ENABLED(SWITCHING_NOZZLE) || ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if DO_SWITCH_EXTRUDER || ANY(SWITCHING_NOZZLE, PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
  #include "module/tool_change.h"
 #endif
@ -328,7 +328,7 @@ void disable_all_steppers() {
      ExtUI::onFilamentRunout(ExtUI::getActiveTool());
    #endif
-    #if ENABLED(HOST_PROMPT_SUPPORT) || ENABLED(HOST_ACTION_COMMANDS)
+    #if EITHER(HOST_PROMPT_SUPPORT, HOST_ACTION_COMMANDS)
      const char tool = '0'
        #if NUM_RUNOUT_SENSORS > 1
          + active_extruder
@ -443,7 +443,7 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) {
  }
  // Prevent steppers timing-out in the middle of M600
-  #if ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
+  #if BOTH(ADVANCED_PAUSE_FEATURE, PAUSE_PARK_NO_STEPPER_TIMEOUT)
    #define MOVE_AWAY_TEST !did_pause_print
  #else
    #define MOVE_AWAY_TEST true
@ -1000,7 +1000,7 @@ void setup() {
    dac_init();
  #endif
-  #if (ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE)) && HAS_SOLENOID_1
+  #if EITHER(Z_PROBE_SLED, SOLENOID_PROBE) && HAS_SOLENOID_1
    OUT_WRITE(SOL1_PIN, LOW); // OFF
  #endif
--- a/Marlin/src/core/drivers.h
+++ b/Marlin/src/core/drivers.h
@ -52,7 +52,7 @@
 #define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T)
 #define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T)
 #define AXIS_DRIVER_TYPE_Z(T) _AXIS_DRIVER_TYPE(Z,T)
-#define AXIS_DRIVER_TYPE_X2(T) ((ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)) && _AXIS_DRIVER_TYPE(X2,T))
+#define AXIS_DRIVER_TYPE_X2(T) (EITHER(X_DUAL_STEPPER_DRIVERS, DUAL_X_CARRIAGE) && _AXIS_DRIVER_TYPE(X2,T))
 #define AXIS_DRIVER_TYPE_Y2(T) (ENABLED(Y_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Y2,T))
 #define AXIS_DRIVER_TYPE_Z2(T) (Z_MULTI_STEPPER_DRIVERS && _AXIS_DRIVER_TYPE(Z2,T))
 #define AXIS_DRIVER_TYPE_Z3(T) (ENABLED(Z_TRIPLE_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Z3,T))
--- a/Marlin/src/core/macros.h
+++ b/Marlin/src/core/macros.h
@ -133,8 +133,25 @@
 #endif
 // Macros to chain up to 12 conditions
 #define _DO_1(W,C,A)       (_##W##_1(A))
 #define _DO_2(W,C,A,B)     (_##W##_1(A) C _##W##_1(B))
 #define _DO_3(W,C,A,V...)  (_##W##_1(A) C _DO_2(W,C,V))
 #define _DO_4(W,C,A,V...)  (_##W##_1(A) C _DO_3(W,C,V))
 #define _DO_5(W,C,A,V...)  (_##W##_1(A) C _DO_4(W,C,V))
 #define _DO_6(W,C,A,V...)  (_##W##_1(A) C _DO_5(W,C,V))
 #define _DO_7(W,C,A,V...)  (_##W##_1(A) C _DO_6(W,C,V))
 #define _DO_8(W,C,A,V...)  (_##W##_1(A) C _DO_7(W,C,V))
 #define _DO_9(W,C,A,V...)  (_##W##_1(A) C _DO_8(W,C,V))
 #define _DO_10(W,C,A,V...) (_##W##_1(A) C _DO_9(W,C,V))
 #define _DO_11(W,C,A,V...) (_##W##_1(A) C _DO_10(W,C,V))
 #define _DO_12(W,C,A,V...) (_##W##_1(A) C _DO_11(W,C,V))
 #define __DO_N(W,C,N,V...) _DO_##N(W,C,V)
 #define _DO_N(W,C,N,V...)  __DO_N(W,C,N,V)
 #define DO(W,C,V...)       _DO_N(W,C,NUM_ARGS(V),V)
 // Macros to support option testing
-#define _CAT(a, ...) a ## __VA_ARGS__
+#define _CAT(a,V...) a##V
 #define SWITCH_ENABLED_false 0
 #define SWITCH_ENABLED_true  1
 #define SWITCH_ENABLED_0     0
@ -142,16 +159,33 @@
 #define SWITCH_ENABLED_0x0   0
 #define SWITCH_ENABLED_0x1   1
 #define SWITCH_ENABLED_      1
-#define ENABLED(b) _CAT(SWITCH_ENABLED_, b)
+#define _ENA_1(O)           _CAT(SWITCH_ENABLED_, O)
-#define DISABLED(b) !ENABLED(b)
+#define _DIS_1(O)           !_ENA_1(O)
 #define ENABLED(V...)       DO(ENA,&&,V)
 #define DISABLED(V...)      DO(DIS,&&,V)
-#define WITHIN(V,L,H) ((V) >= (L) && (V) <= (H))
+#define ANY(V...)          !DISABLED(V)
-#define NUMERIC(a) WITHIN(a, '0', '9')
+#define NONE(V...)          DISABLED(V)
-#define DECIMAL(a) (NUMERIC(a) || a == '.')
+#define ALL(V...)           ENABLED(V)
-#define NUMERIC_SIGNED(a) (NUMERIC(a) || (a) == '-' || (a) == '+')
+#define BOTH(V1,V2)         ALL(V1,V2)
-#define DECIMAL_SIGNED(a) (DECIMAL(a) || (a) == '-' || (a) == '+')
+#define EITHER(V1,V2)       ANY(V1,V2)
-#define COUNT(a) (sizeof(a)/sizeof(*a))
+
-#define ZERO(a) memset(a,0,sizeof(a))
+// Macros to support pins/buttons exist testing
 #define _PINEX_1(PN)        (defined(PN##_PIN) && PN##_PIN >= 0)
 #define PIN_EXISTS(V...)    DO(PINEX,&&,V)
 #define ANY_PIN(V...)       DO(PINEX,||,V)
 #define _BTNEX_1(BN)        (defined(BTN_##BN) && BTN_##BN >= 0)
 #define BUTTON_EXISTS(V...) DO(BTNEX,&&,V)
 #define ANY_BUTTON(V...)    DO(BTNEX,||,V)
 #define WITHIN(N,L,H)       ((N) >= (L) && (N) <= (H))
 #define NUMERIC(a)          WITHIN(a, '0', '9')
 #define DECIMAL(a)          (NUMERIC(a) || a == '.')
 #define NUMERIC_SIGNED(a)   (NUMERIC(a) || (a) == '-' || (a) == '+')
 #define DECIMAL_SIGNED(a)   (DECIMAL(a) || (a) == '-' || (a) == '+')
 #define COUNT(a)            (sizeof(a)/sizeof(*a))
 #define ZERO(a)             memset(a,0,sizeof(a))
 #define COPY(a,b) do{ \
    static_assert(sizeof(a[0]) == sizeof(b[0]), "COPY: '" STRINGIFY(a) "' and '" STRINGIFY(b) "' types (sizes) don't match!"); \
    memcpy(&a[0],&b[0],MIN(sizeof(a),sizeof(b))); \
@ -165,8 +199,8 @@
 #define ARRAY_2(v1, v2, ...)                 { v1, v2 }
 #define ARRAY_1(v1, ...)                     { v1 }
-#define _ARRAY_N(N, ...) ARRAY_ ##N(__VA_ARGS__)
+#define _ARRAY_N(N,V...) ARRAY_##N(V)
-#define ARRAY_N(N, ...) _ARRAY_N(N, __VA_ARGS__)
+#define ARRAY_N(N,V...) _ARRAY_N(N,V)
 // Macros for adding
 #define INC_0 1
@ -178,7 +212,7 @@
 #define INC_6 7
 #define INC_7 8
 #define INC_8 9
-#define INCREMENT_(n) INC_ ##n
+#define INCREMENT_(n) INC_##n
 #define INCREMENT(n) INCREMENT_(n)
 // Macros for subtracting
@ -191,12 +225,9 @@
 #define DEC_7 6
 #define DEC_8 7
 #define DEC_9 8
-#define DECREMENT_(n) DEC_ ##n
+#define DECREMENT_(n) DEC_##n
 #define DECREMENT(n) DECREMENT_(n)
 #define PIN_EXISTS(PN)    (defined(PN ##_PIN) && PN ##_PIN >= 0)
 #define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0)
 #define MMM_TO_MMS(MM_M) ((MM_M)/60.0f)
 #define MMS_TO_MMM(MM_S) ((MM_S)*60.0f)
--- a/Marlin/src/core/minmax.h
+++ b/Marlin/src/core/minmax.h
@ -23,9 +23,9 @@
 #undef MIN
 #undef MAX
-// Pass NUM_ARGS(__VA_ARGS__) to use the number of arguments
+// Use NUM_ARGS(__VA_ARGS__) to get the number of variadic arguments
 #define _NUM_ARGS(_0,_24_,_23,_22,_21,_20,_19,_18,_17,_16,_15,_14,_13,_12,_11,_10,_9,_8,_7,_6,_5,_4,_3,_2,_1,N,...) N
-#define NUM_ARGS(...) _NUM_ARGS(0, __VA_ARGS__ ,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0)
+#define NUM_ARGS(V...) _NUM_ARGS(0,V,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0)
 #ifdef __cplusplus
--- a/Marlin/src/core/utility.cpp
+++ b/Marlin/src/core/utility.cpp
@ -35,7 +35,7 @@ void safe_delay(millis_t ms) {
  thermalManager.manage_heater(); // This keeps us safe if too many small safe_delay() calls are made
 }
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
  void crc16(uint16_t *crc, const void * const data, uint16_t cnt) {
    uint8_t *ptr = (uint8_t *)data;
@ -48,7 +48,7 @@ void safe_delay(millis_t ms) {
 #endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
-#if ENABLED(ULTRA_LCD) || ENABLED(DEBUG_LEVELING_FEATURE) || ENABLED(EXTENSIBLE_UI)
+#if ANY(ULTRA_LCD, DEBUG_LEVELING_FEATURE, EXTENSIBLE_UI)
  char conv[8] = { 0 };
--- a/Marlin/src/core/utility.h
+++ b/Marlin/src/core/utility.h
@ -37,11 +37,11 @@ inline void serial_delay(const millis_t ms) {
  #endif
 }
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
  void crc16(uint16_t *crc, const void * const data, uint16_t cnt);
 #endif
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
+#if EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
  /**
   * These support functions allow the use of large bit arrays of flags that take very
   * little RAM. Currently they are limited to being 16x16 in size. Changing the declaration
@ -53,7 +53,7 @@ inline void serial_delay(const millis_t ms) {
  FORCE_INLINE bool is_bitmap_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { return TEST(bits[y], x); }
 #endif
-#if ENABLED(ULTRA_LCD) || ENABLED(DEBUG_LEVELING_FEATURE) || ENABLED(EXTENSIBLE_UI)
+#if ANY(ULTRA_LCD, DEBUG_LEVELING_FEATURE, EXTENSIBLE_UI)
  // Convert uint8_t to string with 123 format
  char* ui8tostr3(const uint8_t x);
--- a/Marlin/src/feature/bedlevel/bedlevel.cpp
+++ b/Marlin/src/feature/bedlevel/bedlevel.cpp
@ -27,7 +27,7 @@
 #include "bedlevel.h"
 #include "../../module/planner.h"
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(PROBE_MANUALLY)
+#if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY)
  #include "../../module/motion.h"
 #endif
@ -146,7 +146,7 @@ void reset_bed_level() {
  #endif
 }
-#if ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(MESH_BED_LEVELING)
+#if EITHER(AUTO_BED_LEVELING_BILINEAR, MESH_BED_LEVELING)
  /**
   * Enable to produce output in JSON format suitable
@ -215,7 +215,7 @@ void reset_bed_level() {
 #endif // AUTO_BED_LEVELING_BILINEAR || MESH_BED_LEVELING
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(PROBE_MANUALLY)
+#if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY)
  void _manual_goto_xy(const float &rx, const float &ry) {
--- a/Marlin/src/feature/bedlevel/bedlevel.h
+++ b/Marlin/src/feature/bedlevel/bedlevel.h
@ -48,7 +48,7 @@ void reset_bed_level();
  void set_z_fade_height(const float zfh, const bool do_report=true);
 #endif
-#if ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(MESH_BED_LEVELING)
+#if EITHER(AUTO_BED_LEVELING_BILINEAR, MESH_BED_LEVELING)
  #include <stdint.h>
@ -61,7 +61,7 @@ void reset_bed_level();
 #endif
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(PROBE_MANUALLY)
+#if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY)
  void _manual_goto_xy(const float &x, const float &y);
 #endif
--- a/Marlin/src/feature/digipot/digipot_mcp4018.cpp
+++ b/Marlin/src/feature/digipot/digipot_mcp4018.cpp
@ -22,7 +22,7 @@
 #include "../../inc/MarlinConfig.h"
-#if ENABLED(DIGIPOT_I2C) && ENABLED(DIGIPOT_MCP4018)
+#if BOTH(DIGIPOT_I2C, DIGIPOT_MCP4018)
 #include "../../core/enum.h"
 #include "Stream.h"
--- a/Marlin/src/feature/leds/leds.cpp
+++ b/Marlin/src/feature/leds/leds.cpp
@ -52,7 +52,7 @@
  );
 #endif
-#if ENABLED(LED_CONTROL_MENU) || ENABLED(PRINTER_EVENT_LEDS)
+#if EITHER(LED_CONTROL_MENU, PRINTER_EVENT_LEDS)
  LEDColor LEDLights::color;
  bool LEDLights::lights_on;
 #endif
@ -60,7 +60,7 @@
 LEDLights leds;
 void LEDLights::setup() {
-  #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+  #if EITHER(RGB_LED, RGBW_LED)
    if (PWM_PIN(RGB_LED_R_PIN)) SET_PWM(RGB_LED_R_PIN); else SET_OUTPUT(RGB_LED_R_PIN);
    if (PWM_PIN(RGB_LED_G_PIN)) SET_PWM(RGB_LED_G_PIN); else SET_OUTPUT(RGB_LED_G_PIN);
    if (PWM_PIN(RGB_LED_B_PIN)) SET_PWM(RGB_LED_B_PIN); else SET_OUTPUT(RGB_LED_B_PIN);
@ -108,7 +108,7 @@ void LEDLights::set_color(const LEDColor &incol
  #endif
-  #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+  #if EITHER(RGB_LED, RGBW_LED)
    // This variant uses 3-4 separate pins for the RGB(W) components.
    // If the pins can do PWM then their intensity will be set.
@ -131,7 +131,7 @@ void LEDLights::set_color(const LEDColor &incol
    RGBsetColor(incol.r, incol.g, incol.b, true);
  #endif
-  #if ENABLED(LED_CONTROL_MENU) || ENABLED(PRINTER_EVENT_LEDS)
+  #if EITHER(LED_CONTROL_MENU, PRINTER_EVENT_LEDS)
    // Don't update the color when OFF
    lights_on = !incol.is_off();
    if (lights_on) color = incol;
--- a/Marlin/src/feature/leds/leds.h
+++ b/Marlin/src/feature/leds/leds.h
@ -33,7 +33,7 @@
  #include "neopixel.h"
 #endif
-#define HAS_WHITE_LED (ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED))
+#define HAS_WHITE_LED EITHER(RGBW_LED, NEOPIXEL_LED)
 /**
 * LEDcolor type for use with leds.set_color
@ -183,7 +183,7 @@ public:
    static inline LEDColor get_color() { return lights_on ? color : LEDColorOff(); }
  #endif
-  #if ENABLED(LED_CONTROL_MENU) || ENABLED(PRINTER_EVENT_LEDS)
+  #if EITHER(LED_CONTROL_MENU, PRINTER_EVENT_LEDS)
    static LEDColor color; // last non-off color
    static bool lights_on; // the last set color was "on"
  #endif
--- a/Marlin/src/feature/power.cpp
+++ b/Marlin/src/feature/power.cpp
@ -46,7 +46,7 @@ bool Power::is_power_needed() {
    HOTEND_LOOP() if (thermalManager.autofan_speed[e]) return true;
  #endif
-  #if ENABLED(AUTO_POWER_CONTROLLERFAN) && HAS_CONTROLLER_FAN && ENABLED(USE_CONTROLLER_FAN)
+  #if ENABLED(AUTO_POWER_CONTROLLERFAN, USE_CONTROLLER_FAN) && HAS_CONTROLLER_FAN
    if (controllerfan_speed) return true;
  #endif
--- a/Marlin/src/feature/solenoid.cpp
+++ b/Marlin/src/feature/solenoid.cpp
@ -22,7 +22,7 @@
 #include "../inc/MarlinConfig.h"
-#if ENABLED(EXT_SOLENOID) || ENABLED(MANUAL_SOLENOID_CONTROL)
+#if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
 #include "solenoid.h"
@ -95,4 +95,4 @@ void disable_all_solenoids() {
  #endif
 }
-#endif // EXT_SOLENOID
+#endif // EXT_SOLENOID || MANUAL_SOLENOID_CONTROL
--- a/Marlin/src/gcode/bedlevel/abl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp
@ -36,7 +36,7 @@
 #include "../../../module/probe.h"
 #include "../../queue.h"
-#if ENABLED(LCD_BED_LEVELING) && ENABLED(PROBE_MANUALLY)
+#if BOTH(LCD_BED_LEVELING, PROBE_MANUALLY)
  #include "../../../lcd/ultralcd.h"
 #endif
@ -151,7 +151,7 @@
 */
 G29_TYPE GcodeSuite::G29() {
-  #if ENABLED(DEBUG_LEVELING_FEATURE) || ENABLED(PROBE_MANUALLY)
+  #if EITHER(DEBUG_LEVELING_FEATURE, PROBE_MANUALLY)
    const bool seenQ = parser.seen('Q');
  #else
    constexpr bool seenQ = false;
@ -205,7 +205,7 @@ G29_TYPE GcodeSuite::G29() {
  ABL_VAR float xProbe, yProbe, measured_z;
  ABL_VAR bool dryrun, abl_should_enable;
-  #if ENABLED(PROBE_MANUALLY) || ENABLED(AUTO_BED_LEVELING_LINEAR)
+  #if EITHER(PROBE_MANUALLY, AUTO_BED_LEVELING_LINEAR)
    ABL_VAR int abl_probe_index;
  #endif
@ -280,7 +280,7 @@ G29_TYPE GcodeSuite::G29() {
      if (active_extruder != 0) tool_change(0);
    #endif
-    #if ENABLED(PROBE_MANUALLY) || ENABLED(AUTO_BED_LEVELING_LINEAR)
+    #if EITHER(PROBE_MANUALLY, AUTO_BED_LEVELING_LINEAR)
      abl_probe_index = -1;
    #endif
@ -522,7 +522,7 @@ G29_TYPE GcodeSuite::G29() {
    }
    else {
-      #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT)
+      #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
        const uint16_t index = abl_probe_index - 1;
      #endif
--- a/Marlin/src/gcode/calibrate/G28.cpp
+++ b/Marlin/src/gcode/calibrate/G28.cpp
@ -400,7 +400,7 @@ void GcodeSuite::G28(const bool always_home_all) {
  endstops.not_homing();
-  #if ENABLED(DELTA) && ENABLED(DELTA_HOME_TO_SAFE_ZONE)
+  #if BOTH(DELTA, DELTA_HOME_TO_SAFE_ZONE)
    // move to a height where we can use the full xy-area
    do_blocking_move_to_z(delta_clip_start_height);
  #endif
--- a/Marlin/src/gcode/calibrate/G425.cpp
+++ b/Marlin/src/gcode/calibrate/G425.cpp
@ -52,8 +52,8 @@
  #define CALIBRATION_MEASUREMENT_CERTAIN   0.5 // mm
 #endif
-#define HAS_X_CENTER (ENABLED(CALIBRATION_MEASURE_LEFT)  && ENABLED(CALIBRATION_MEASURE_RIGHT))
+#define HAS_X_CENTER BOTH(CALIBRATION_MEASURE_LEFT, CALIBRATION_MEASURE_RIGHT)
-#define HAS_Y_CENTER (ENABLED(CALIBRATION_MEASURE_FRONT) && ENABLED(CALIBRATION_MEASURE_BACK))
+#define HAS_Y_CENTER BOTH(CALIBRATION_MEASURE_FRONT, CALIBRATION_MEASURE_BACK)
 #if ENABLED(BACKLASH_GCODE)
  extern float backlash_distance_mm[], backlash_correction, backlash_smoothing_mm;
--- a/Marlin/src/gcode/control/M17_M18_M84.cpp
+++ b/Marlin/src/gcode/control/M17_M18_M84.cpp
@ -25,7 +25,7 @@
 #include "../../lcd/ultralcd.h"
 #include "../../module/stepper.h"
-#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTRA_LCD)
+#if BOTH(AUTO_BED_LEVELING_UBL, ULTRA_LCD)
  #include "../../feature/bedlevel/bedlevel.h"
 #endif
--- a/Marlin/src/gcode/control/M380_M381.cpp
+++ b/Marlin/src/gcode/control/M380_M381.cpp
@ -22,7 +22,7 @@
 #include "../../inc/MarlinConfig.h"
-#if ENABLED(EXT_SOLENOID) || ENABLED(MANUAL_SOLENOID_CONTROL)
+#if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
 #include "../gcode.h"
 #include "../../feature/solenoid.h"
--- a/Marlin/src/gcode/feature/digipot/M907-M910.cpp
+++ b/Marlin/src/gcode/feature/digipot/M907-M910.cpp
@ -22,7 +22,7 @@
 #include "../../../inc/MarlinConfig.h"
-#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || ENABLED(DIGIPOT_I2C) || ENABLED(DAC_STEPPER_CURRENT)
+#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || EITHER(DIGIPOT_I2C, DAC_STEPPER_CURRENT)
 #include "../../gcode.h"
@ -50,7 +50,7 @@ void GcodeSuite::M907() {
  #elif HAS_MOTOR_CURRENT_PWM
-    #if PIN_EXISTS(MOTOR_CURRENT_PWM_X) || PIN_EXISTS(MOTOR_CURRENT_PWM_Y) || PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
+    #if ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY)
      if (parser.seenval('X') || parser.seenval('Y')) stepper.digipot_current(0, parser.value_int());
    #endif
    #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@ -117,7 +117,7 @@ void GcodeSuite::get_destination_from_command() {
  #endif
  // Get ABCDHI mixing factors
-  #if ENABLED(MIXING_EXTRUDER) && ENABLED(DIRECT_MIXING_IN_G1)
+  #if BOTH(MIXING_EXTRUDER, DIRECT_MIXING_IN_G1)
    M165();
  #endif
 }
@ -330,7 +330,7 @@ void GcodeSuite::process_parsed_command(
          case 33: M33(); break;                                  // M33: Get the long full path to a file or folder
        #endif
-        #if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE)
+        #if BOTH(SDCARD_SORT_ALPHA, SDSORT_GCODE)
          case 34: M34(); break;                                  // M34: Set SD card sorting options
        #endif
@ -494,7 +494,7 @@ void GcodeSuite::process_parsed_command(
        case 665: M665(); break;                                  // M665: Set delta configurations
      #endif
-      #if ENABLED(DELTA) || ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
+      #if ANY(DELTA, X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS, Z_DUAL_ENDSTOPS)
        case 666: M666(); break;                                  // M666: Set delta or dual endstop adjustment
      #endif
@ -576,7 +576,7 @@ void GcodeSuite::process_parsed_command(
        case 364: if (M364()) return; break;                      // M364: SCARA Psi pos3 (90 deg to Theta)
      #endif
-      #if ENABLED(EXT_SOLENOID) || ENABLED(MANUAL_SOLENOID_CONTROL)
+      #if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
        case 380: M380(); break;                                  // M380: Activate solenoid on active (or specified) extruder
        case 381: M381(); break;                                  // M381: Disable all solenoids or, if MANUAL_SOLENOID_CONTROL, active (or specified) solenoid
      #endif
@ -673,7 +673,7 @@ void GcodeSuite::process_parsed_command(
        case 900: M900(); break;                                  // M900: Set advance K factor.
      #endif
-      #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || ENABLED(DIGIPOT_I2C) || ENABLED(DAC_STEPPER_CURRENT)
+      #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || EITHER(DIGIPOT_I2C, DAC_STEPPER_CURRENT)
        case 907: M907(); break;                                  // M907: Set digital trimpot motor current using axis codes.
        #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
          case 908: M908(); break;                                // M908: Control digital trimpot directly.
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@ -144,7 +144,7 @@
 * M140 - Set bed target temp. S<temp>
 * M145 - Set heatup values for materials on the LCD. H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
 * M149 - Set temperature units. (Requires TEMPERATURE_UNITS_SUPPORT)
- * M150 - Set Status LED Color as R<red> U<green> B<blue> P<bright>. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, NEOPIXEL_LED, or PCA9632).
+ * M150 - Set Status LED Color as R<red> U<green> B<blue> P<bright>. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, NEOPIXEL_LED, PCA9533, or PCA9632).
 * M155 - Auto-report temperatures with interval of S<seconds>. (Requires AUTO_REPORT_TEMPERATURES)
 * M163 - Set a single proportion for a mixing extruder. (Requires MIXING_EXTRUDER)
 * M164 - Commit the mix and save to a virtual tool (current, or as specified by 'S'). (Requires MIXING_EXTRUDER)
@ -480,7 +480,7 @@ private:
    #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
      static void M33();
    #endif
-    #if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE)
+    #if BOTH(SDCARD_SORT_ALPHA, SDSORT_GCODE)
      static void M34();
    #endif
  #endif
@ -706,7 +706,7 @@ private:
    static bool M364();
  #endif
-  #if ENABLED(EXT_SOLENOID) || ENABLED(MANUAL_SOLENOID_CONTROL)
+  #if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
    static void M380();
    static void M381();
  #endif
@ -845,7 +845,7 @@ private:
    static void M918();
  #endif
-  #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || ENABLED(DIGIPOT_I2C) || ENABLED(DAC_STEPPER_CURRENT)
+  #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || EITHER(DIGIPOT_I2C, DAC_STEPPER_CURRENT)
    static void M907();
    #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
      static void M908();
--- a/Marlin/src/gcode/host/M115.cpp
+++ b/Marlin/src/gcode/host/M115.cpp
@ -152,7 +152,7 @@ void GcodeSuite::M115() {
    // THERMAL_PROTECTION
    cap_line(PSTR("THERMAL_PROTECTION")
-      #if ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(THERMAL_PROTECTION_BED)
+      #if BOTH(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED)
        , true
      #endif
    );
--- a/Marlin/src/gcode/lcd/M73.cpp
+++ b/Marlin/src/gcode/lcd/M73.cpp
@ -22,7 +22,7 @@
 #include "../../inc/MarlinConfig.h"
-#if ENABLED(LCD_SET_PROGRESS_MANUALLY) && (ENABLED(EXTENSIBLE_UI) || ENABLED(ULTRA_LCD))
+#if ENABLED(LCD_SET_PROGRESS_MANUALLY) && EITHER(EXTENSIBLE_UI, ULTRA_LCD)
 #include "../gcode.h"
 #include "../../lcd/ultralcd.h"
@ -42,4 +42,4 @@ void GcodeSuite::M73() {
    ui.set_progress(parser.value_byte());
 }
-#endif // LCD_SET_PROGRESS_MANUALLY && (ENABLED(EXTENSIBLE_UI) || ENABLED(ULTRA_LCD))
+#endif // LCD_SET_PROGRESS_MANUALLY && (EXTENSIBLE_UI || ULTRA_LCD)
--- a/Marlin/src/gcode/motion/G0_G1.cpp
+++ b/Marlin/src/gcode/motion/G0_G1.cpp
@ -25,7 +25,7 @@
 #include "../../Marlin.h"
-#if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
+#if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
  #include "../../feature/fwretract.h"
 #endif
@ -79,7 +79,7 @@ void GcodeSuite::G0_G1(
      }
    #endif
-    #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
+    #if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
      if (MIN_AUTORETRACT <= MAX_AUTORETRACT) {
        // When M209 Autoretract is enabled, convert E-only moves to firmware retract/recover moves
--- a/Marlin/src/gcode/queue.h
+++ b/Marlin/src/gcode/queue.h
@ -95,7 +95,7 @@ void enqueue_and_echo_commands_P(PGM_P const pgcode);
 */
 bool enqueue_and_echo_command(const char* cmd);
-#define HAS_LCD_QUEUE_NOW (ENABLED(MALYAN_LCD) || (HAS_LCD_MENU && (ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE))))
+#define HAS_LCD_QUEUE_NOW (ENABLED(MALYAN_LCD) || (HAS_LCD_MENU && ANY(AUTO_BED_LEVELING_UBL, PID_AUTOTUNE_MENU, ADVANCED_PAUSE_FEATURE)))
 #define HAS_QUEUE_NOW (ENABLED(SDSUPPORT) || HAS_LCD_QUEUE_NOW)
 #if HAS_QUEUE_NOW
--- a/Marlin/src/gcode/sdcard/M34.cpp
+++ b/Marlin/src/gcode/sdcard/M34.cpp
@ -22,7 +22,7 @@
 #include "../../inc/MarlinConfig.h"
-#if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE)
+#if BOTH(SDCARD_SORT_ALPHA, SDSORT_GCODE)
 #include "../gcode.h"
 #include "../../sd/cardreader.h"
--- a/Marlin/src/gcode/temperature/M104_M109.cpp
+++ b/Marlin/src/gcode/temperature/M104_M109.cpp
@ -125,7 +125,7 @@ void GcodeSuite::M109() {
        print_job_timer.start();
    #endif
-    #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+    #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
      if (thermalManager.isHeatingHotend(target_extruder) || !no_wait_for_cooling)
        thermalManager.set_heating_message(target_extruder);
    #endif
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@ -64,7 +64,7 @@
  #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-#elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) || ENABLED(AZSMZ_12864)
+#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864)
  #define ULTRA_LCD
  #define DOGLCD
@ -141,7 +141,7 @@
 #endif
-#if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
+#if EITHER(MAKRPANEL, MINIPANEL)
  #define DOGLCD
  #define ULTIPANEL
  #define DEFAULT_LCD_CONTRAST 17
@ -159,13 +159,13 @@
 #endif
 // 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
-#define HAS_SSD1306_OLED_I2C (ENABLED(U8GLIB_SSD1306) || ENABLED(U8GLIB_SSD1309) || ENABLED(U8GLIB_SH1106))
+#define HAS_SSD1306_OLED_I2C ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
 #if HAS_SSD1306_OLED_I2C
  #define ULTRA_LCD
  #define DOGLCD
 #endif
-#if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)
+#if EITHER(PANEL_ONE, U8GLIB_SH1106)
  #define ULTIMAKERCONTROLLER
@ -177,17 +177,13 @@
 #endif
-#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI) || ENABLED(SILVER_GATE_GLCD_CONTROLLER)
+#if ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER)
  #define DOGLCD
  #define U8GLIB_ST7920
  #define REPRAP_DISCOUNT_SMART_CONTROLLER
 #endif
-#if ENABLED(ULTIMAKERCONTROLLER)              \
+#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, RIGIDBOT_PANEL, ULTI_CONTROLLER)
 || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
 || ENABLED(G3D_PANEL)                        \
 || ENABLED(RIGIDBOT_PANEL)                   \
 || ENABLED(ULTI_CONTROLLER)
  #define ULTIPANEL
 #endif
@ -223,7 +219,7 @@
 * I2C PANELS
 */
-#if ENABLED(LCD_SAINSMART_I2C_1602) || ENABLED(LCD_SAINSMART_I2C_2004)
+#if EITHER(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004)
  #define LCD_I2C_TYPE_PCF8575
  #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
@ -267,15 +263,11 @@
  #define STD_ENCODER_PULSES_PER_STEP 2
  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
-#elif ENABLED(miniVIKI) || ENABLED(VIKI2) \
+#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2, REPRAP_DISCOUNT_SMART_CONTROLLER)
-   || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+
   || ENABLED(AZSMZ_12864) \
   || ENABLED(OLED_PANEL_TINYBOY2) \
   || ENABLED(BQ_LCD_SMART_CONTROLLER) \
   || ENABLED(LCD_I2C_PANELOLU2) \
   || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
  #define STD_ENCODER_PULSES_PER_STEP 4
  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
 #endif
 #ifndef STD_ENCODER_PULSES_PER_STEP
@ -400,16 +392,16 @@
 #endif
 // No inactive extruders with MK2_MULTIPLEXER or SWITCHING_NOZZLE
-#if ENABLED(MK2_MULTIPLEXER) || ENABLED(SWITCHING_NOZZLE)
+#if EITHER(MK2_MULTIPLEXER, SWITCHING_NOZZLE)
  #undef DISABLE_INACTIVE_EXTRUDER
 #endif
 // Prusa MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
-#if ENABLED(MK2_MULTIPLEXER) || ENABLED(PRUSA_MMU2)
+#if EITHER(MK2_MULTIPLEXER, PRUSA_MMU2)
  #define SINGLENOZZLE
 #endif
-#if ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
+#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
  #undef HOTENDS
  #define HOTENDS       1
  #undef TEMP_SENSOR_1_AS_REDUNDANT
@ -435,7 +427,7 @@
 #define SWITCHING_NOZZLE_TWO_SERVOS defined(SWITCHING_NOZZLE_E1_SERVO_NR)
 #define HAS_HOTEND_OFFSET (HOTENDS > 1)
-#define HAS_DUPLICATION_MODE (ENABLED(DUAL_X_CARRIAGE) || ENABLED(MULTI_NOZZLE_DUPLICATION))
+#define HAS_DUPLICATION_MODE EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
 /**
 * DISTINCT_E_FACTORS affects how some E factors are accessed
@ -506,8 +498,8 @@
 /**
 * Set flags for enabled probes
 */
-#define HAS_BED_PROBE (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_PROBE || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE) || ENABLED(SENSORLESS_PROBING) || ENABLED(RACK_AND_PINION_PROBE))
+#define HAS_BED_PROBE (HAS_Z_SERVO_PROBE || ANY(FIX_MOUNTED_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE))
-#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))
+#define PROBE_SELECTED (HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
 #if HAS_BED_PROBE
  #define USES_Z_MIN_PROBE_ENDSTOP DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
@ -528,19 +520,19 @@
  #define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
 #endif
-#define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
+#define HAS_SOFTWARE_ENDSTOPS EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
-#define HAS_RESUME_CONTINUE (ENABLED(EXTENSIBLE_UI) || ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
+#define HAS_RESUME_CONTINUE   ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER)
-#define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533) || ENABLED(NEOPIXEL_LED))
+#define HAS_COLOR_LEDS        ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
-#define HAS_LEDS_OFF_FLAG (ENABLED(PRINTER_EVENT_LEDS) && ENABLED(SDSUPPORT) && HAS_RESUME_CONTINUE)
+#define HAS_LEDS_OFF_FLAG     (BOTH(PRINTER_EVENT_LEDS, SDSUPPORT) && HAS_RESUME_CONTINUE)
-#define HAS_PRINT_PROGRESS (ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY))
+#define HAS_PRINT_PROGRESS    EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
 #define HAS_SERVICE_INTERVALS (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0)
-#define HAS_FILAMENT_SENSOR ENABLED(FILAMENT_RUNOUT_SENSOR)
+#define HAS_FILAMENT_SENSOR   ENABLED(FILAMENT_RUNOUT_SENSOR)
-#define Z_MULTI_STEPPER_DRIVERS (ENABLED(Z_DUAL_STEPPER_DRIVERS) || ENABLED(Z_TRIPLE_STEPPER_DRIVERS))
+#define Z_MULTI_STEPPER_DRIVERS EITHER(Z_DUAL_STEPPER_DRIVERS, Z_TRIPLE_STEPPER_DRIVERS)
-#define Z_MULTI_ENDSTOPS (ENABLED(Z_DUAL_ENDSTOPS) || ENABLED(Z_TRIPLE_ENDSTOPS))
+#define Z_MULTI_ENDSTOPS EITHER(Z_DUAL_ENDSTOPS, Z_TRIPLE_ENDSTOPS)
-#define HAS_EXTRA_ENDSTOPS (ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS)
+#define HAS_EXTRA_ENDSTOPS (EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS)
-#define IS_SCARA     (ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA))
+#define IS_SCARA     EITHER(MORGAN_SCARA, MAKERARM_SCARA)
 #define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA)
 #define IS_CARTESIAN !IS_KINEMATIC
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@ -106,9 +106,9 @@
 /**
 * CoreXY, CoreXZ, and CoreYZ - and their reverse
 */
-#define CORE_IS_XY (ENABLED(COREXY) || ENABLED(COREYX))
+#define CORE_IS_XY EITHER(COREXY, COREYX)
-#define CORE_IS_XZ (ENABLED(COREXZ) || ENABLED(COREZX))
+#define CORE_IS_XZ EITHER(COREXZ, COREZX)
-#define CORE_IS_YZ (ENABLED(COREYZ) || ENABLED(COREZY))
+#define CORE_IS_YZ EITHER(COREYZ, COREZY)
 #define IS_CORE (CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ)
 #if IS_CORE
  #if CORE_IS_XY
@ -124,7 +124,7 @@
    #define CORE_AXIS_1 B_AXIS
    #define CORE_AXIS_2 C_AXIS
  #endif
-  #if ENABLED(COREYX) || ENABLED(COREZX) || ENABLED(COREZY)
+  #if ANY(COREYX, COREZX, COREZY)
    #define CORESIGN(n) (-(n))
  #else
    #define CORESIGN(n) (n)
@ -426,7 +426,7 @@
  #define HEATER_CHAMBER_USES_THERMISTOR
 #endif
-#define HOTEND_USES_THERMISTOR (ENABLED(HEATER_0_USES_THERMISTOR) || ENABLED(HEATER_1_USES_THERMISTOR) || ENABLED(HEATER_2_USES_THERMISTOR) || ENABLED(HEATER_3_USES_THERMISTOR) || ENABLED(HEATER_4_USES_THERMISTOR))
+#define HOTEND_USES_THERMISTOR ANY(HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, HEATER_4_USES_THERMISTOR)
 /**
 * Default hotend offsets, if not defined
@ -877,8 +877,8 @@
  #define AXIS_HAS_STALLGUARD(ST)  (AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2160) || AXIS_DRIVER_TYPE(ST, TMC2660) || AXIS_DRIVER_TYPE(ST, TMC5130) || AXIS_DRIVER_TYPE(ST, TMC5160))
  #define AXIS_HAS_STEALTHCHOP(ST) (AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2160) || AXIS_DRIVER_TYPE(ST, TMC2208) || AXIS_DRIVER_TYPE(ST, TMC5130) || AXIS_DRIVER_TYPE(ST, TMC5160))
-  #define STEALTHCHOP_ENABLED (ENABLED(STEALTHCHOP_XY) || ENABLED(STEALTHCHOP_Z) || ENABLED(STEALTHCHOP_E))
+  #define STEALTHCHOP_ENABLED ANY(STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_E)
-  #define USE_SENSORLESS (ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING))
+  #define USE_SENSORLESS EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
  // Disable Z axis sensorless homing if a probe is used to home the Z axis
  #if HOMING_Z_WITH_PROBE
    #undef Z_STALL_SENSITIVITY
@ -940,8 +940,8 @@
 #if !HAS_HEATED_BED
  #undef PIDTEMPBED
 #endif
-#define HAS_PID_HEATING (ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED))
+#define HAS_PID_HEATING EITHER(PIDTEMP, PIDTEMPBED)
-#define HAS_PID_FOR_BOTH (ENABLED(PIDTEMP) && ENABLED(PIDTEMPBED))
+#define HAS_PID_FOR_BOTH BOTH(PIDTEMP, PIDTEMPBED)
 // Thermal protection
 #define HAS_THERMALLY_PROTECTED_BED (HAS_HEATED_BED && ENABLED(THERMAL_PROTECTION_BED))
@ -976,9 +976,9 @@
  #define Z_PROBE_SERVO_NR -1
 #endif
-#define HAS_SERVO_ANGLES (ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE) || (HAS_Z_SERVO_PROBE && defined(Z_PROBE_SERVO_NR)))
+#define HAS_SERVO_ANGLES (EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE) || (HAS_Z_SERVO_PROBE && defined(Z_PROBE_SERVO_NR)))
-#if !HAS_SERVO_ANGLES
+#if !HAS_SERVO_ANGLES || ENABLED(BLTOUCH)
  #undef EDITABLE_SERVO_ANGLES
 #endif
@ -986,17 +986,17 @@
 #define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH))
 // User Interface
-#define HAS_HOME (PIN_EXISTS(HOME))
+#define HAS_HOME        (PIN_EXISTS(HOME))
-#define HAS_KILL (PIN_EXISTS(KILL))
+#define HAS_KILL        (PIN_EXISTS(KILL))
-#define HAS_SUICIDE (PIN_EXISTS(SUICIDE))
+#define HAS_SUICIDE     (PIN_EXISTS(SUICIDE))
-#define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH))
+#define HAS_PHOTOGRAPH  (PIN_EXISTS(PHOTOGRAPH))
-#define HAS_BUZZER (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER))
+#define HAS_BUZZER      (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER))
-#define HAS_CASE_LIGHT (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE))
+#define HAS_CASE_LIGHT  (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE))
 // Digital control
-#define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET))
+#define HAS_STEPPER_RESET     (PIN_EXISTS(STEPPER_RESET))
-#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
+#define HAS_DIGIPOTSS         (PIN_EXISTS(DIGIPOTSS))
-#define HAS_MOTOR_CURRENT_PWM (PIN_EXISTS(MOTOR_CURRENT_PWM_X) || PIN_EXISTS(MOTOR_CURRENT_PWM_Y) || PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_Z) || PIN_EXISTS(MOTOR_CURRENT_PWM_E))
+#define HAS_MOTOR_CURRENT_PWM ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E)
 #define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS || HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS)
@ -1055,7 +1055,7 @@
  #undef AUTO_REPORT_TEMPERATURES
 #endif
-#define HAS_AUTO_REPORTING (ENABLED(AUTO_REPORT_TEMPERATURES) || ENABLED(AUTO_REPORT_SD_STATUS))
+#define HAS_AUTO_REPORTING EITHER(AUTO_REPORT_TEMPERATURES, AUTO_REPORT_SD_STATUS)
 /**
 * This setting is also used by M109 when trying to calculate
@ -1272,14 +1272,14 @@
 /**
 * Set granular options based on the specific type of leveling
 */
-#define UBL_SEGMENTED   (ENABLED(AUTO_BED_LEVELING_UBL) && (ENABLED(DELTA)))
+#define UBL_SEGMENTED   BOTH(AUTO_BED_LEVELING_UBL, DELTA)
-#define ABL_PLANAR      (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT))
+#define ABL_PLANAR      EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
-#define ABL_GRID        (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR))
+#define ABL_GRID        EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 #define HAS_ABL_NOT_UBL (ABL_PLANAR || ABL_GRID)
 #define HAS_ABL_OR_UBL  (HAS_ABL_NOT_UBL || ENABLED(AUTO_BED_LEVELING_UBL))
 #define HAS_LEVELING    (HAS_ABL_OR_UBL || ENABLED(MESH_BED_LEVELING))
 #define HAS_AUTOLEVEL   (HAS_ABL_OR_UBL && DISABLED(PROBE_MANUALLY))
-#define HAS_MESH        (ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(MESH_BED_LEVELING))
+#define HAS_MESH        ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
 #define PLANNER_LEVELING      (HAS_LEVELING && DISABLED(AUTO_BED_LEVELING_UBL))
 #define HAS_PROBING_PROCEDURE (HAS_ABL_OR_UBL || ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST))
 #define HAS_POSITION_MODIFIERS (ENABLED(FWRETRACT) || HAS_LEVELING || ENABLED(SKEW_CORRECTION))
@ -1297,8 +1297,8 @@
  #undef NO_FAN_SLOWING_IN_PID_TUNING
 #endif
-#define QUIET_PROBING (HAS_BED_PROBE && (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0))
+#define QUIET_PROBING (HAS_BED_PROBE && (EITHER(PROBING_HEATERS_OFF, PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0))
-#define HEATER_IDLE_HANDLER (ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PROBING_HEATERS_OFF))
+#define HEATER_IDLE_HANDLER EITHER(ADVANCED_PAUSE_FEATURE, PROBING_HEATERS_OFF)
 #if ENABLED(ADVANCED_PAUSE_FEATURE) && !defined(FILAMENT_CHANGE_SLOW_LOAD_LENGTH)
  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0
@ -1400,7 +1400,7 @@
 /**
 * Default mesh area is an area with an inset margin on the print area.
 */
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
  #if IS_KINEMATIC
    // Probing points may be verified at compile time within the radius
    // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
@ -1440,7 +1440,7 @@
 #endif // MESH_BED_LEVELING || AUTO_BED_LEVELING_UBL
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_3POINT)
+#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
  #if IS_KINEMATIC
    #define SIN0    0.0
    #define SIN120  0.866025
@ -1488,7 +1488,7 @@
  #endif
 #endif
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  #ifndef LEFT_PROBE_BED_POSITION
    #define LEFT_PROBE_BED_POSITION MIN_PROBE_X
  #endif
@ -1582,7 +1582,7 @@
 #endif
 // Add commands that need sub-codes to this list
-#define USE_GCODE_SUBCODES ENABLED(G38_PROBE_TARGET) || ENABLED(CNC_COORDINATE_SYSTEMS) || ENABLED(POWER_LOSS_RECOVERY)
+#define USE_GCODE_SUBCODES ANY(G38_PROBE_TARGET, CNC_COORDINATE_SYSTEMS, POWER_LOSS_RECOVERY)
 // Parking Extruder
 #if ENABLED(PARKING_EXTRUDER)
@ -1624,8 +1624,8 @@
  #endif
 #endif
-// Nozzle park
+// Nozzle park for Delta
-#if ENABLED(NOZZLE_PARK_FEATURE) && ENABLED(DELTA)
+#if BOTH(NOZZLE_PARK_FEATURE, DELTA)
  #undef NOZZLE_PARK_Z_FEEDRATE
  #define NOZZLE_PARK_Z_FEEDRATE NOZZLE_PARK_XY_FEEDRATE
 #endif
@ -1666,7 +1666,7 @@
 // If platform requires early initialization of watchdog to properly boot
 #define EARLY_WATCHDOG (ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM))
-#define USE_EXECUTE_COMMANDS_IMMEDIATE (ENABLED(G29_RETRY_AND_RECOVER) || ENABLED(GCODE_MACROS) || ENABLED(POWER_LOSS_RECOVERY) || HAS_DRIVER(L6470))
+#define USE_EXECUTE_COMMANDS_IMMEDIATE (ANY(G29_RETRY_AND_RECOVER, GCODE_MACROS, POWER_LOSS_RECOVERY) || HAS_DRIVER(L6470))
 #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
  #define Z_STEPPER_COUNT 3
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@ -395,7 +395,7 @@
  #elif TX_BUFFER_SIZE && (TX_BUFFER_SIZE < 2 || TX_BUFFER_SIZE > 256 || !IS_POWER_OF_2(TX_BUFFER_SIZE))
    #error "TX_BUFFER_SIZE must be 0 or a power of 2 between 1 and 256."
  #endif
-#elif ENABLED(SERIAL_XON_XOFF) || ENABLED(SERIAL_STATS_MAX_RX_QUEUED) || ENABLED(SERIAL_STATS_DROPPED_RX)
+#elif ANY(SERIAL_XON_XOFF, SERIAL_STATS_MAX_RX_QUEUED, SERIAL_STATS_DROPPED_RX)
  #error "SERIAL_XON_XOFF and SERIAL_STATS_* features not supported on USB-native AVR devices."
 #endif
@ -410,7 +410,7 @@
 /**
 * Dual / Triple Stepper Drivers
 */
-#if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE)
+#if BOTH(X_DUAL_STEPPER_DRIVERS, DUAL_X_CARRIAGE)
  #error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS."
 #elif ENABLED(X_DUAL_STEPPER_DRIVERS) && !(HAS_X2_ENABLE && HAS_X2_STEP && HAS_X2_DIR)
  #error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)."
@ -462,21 +462,21 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  #error "PULLDOWN pin mode is not available on the selected board."
 #endif
-#if ENABLED(ENDSTOPPULLUPS) && ENABLED(ENDSTOPPULLDOWNS)
+#if BOTH(ENDSTOPPULLUPS, ENDSTOPPULLDOWNS)
  #error "Enable only one of ENDSTOPPULLUPS or ENDSTOPPULLDOWNS."
-#elif ENABLED(FIL_RUNOUT_PULLUP) && ENABLED(FIL_RUNOUT_PULLDOWN)
+#elif BOTH(FIL_RUNOUT_PULLUP, FIL_RUNOUT_PULLDOWN)
  #error "Enable only one of FIL_RUNOUT_PULLUP or FIL_RUNOUT_PULLDOWN."
-#elif ENABLED(ENDSTOPPULLUP_XMAX) && ENABLED(ENDSTOPPULLDOWN_XMAX)
+#elif BOTH(ENDSTOPPULLUP_XMAX, ENDSTOPPULLDOWN_XMAX)
  #error "Enable only one of ENDSTOPPULLUP_X_MAX or ENDSTOPPULLDOWN_X_MAX."
-#elif ENABLED(ENDSTOPPULLUP_YMAX) && ENABLED(ENDSTOPPULLDOWN_YMAX)
+#elif BOTH(ENDSTOPPULLUP_YMAX, ENDSTOPPULLDOWN_YMAX)
  #error "Enable only one of ENDSTOPPULLUP_Y_MAX or ENDSTOPPULLDOWN_Y_MAX."
-#elif ENABLED(ENDSTOPPULLUP_ZMAX) && ENABLED(ENDSTOPPULLDOWN_ZMAX)
+#elif BOTH(ENDSTOPPULLUP_ZMAX, ENDSTOPPULLDOWN_ZMAX)
  #error "Enable only one of ENDSTOPPULLUP_Z_MAX or ENDSTOPPULLDOWN_Z_MAX."
-#elif ENABLED(ENDSTOPPULLUP_XMIN) && ENABLED(ENDSTOPPULLDOWN_XMIN)
+#elif BOTH(ENDSTOPPULLUP_XMIN, ENDSTOPPULLDOWN_XMIN)
  #error "Enable only one of ENDSTOPPULLUP_X_MIN or ENDSTOPPULLDOWN_X_MIN."
-#elif ENABLED(ENDSTOPPULLUP_YMIN) && ENABLED(ENDSTOPPULLDOWN_YMIN)
+#elif BOTH(ENDSTOPPULLUP_YMIN, ENDSTOPPULLDOWN_YMIN)
  #error "Enable only one of ENDSTOPPULLUP_Y_MIN or ENDSTOPPULLDOWN_Y_MIN."
-#elif ENABLED(ENDSTOPPULLUP_ZMIN) && ENABLED(ENDSTOPPULLDOWN_ZMIN)
+#elif BOTH(ENDSTOPPULLUP_ZMIN, ENDSTOPPULLDOWN_ZMIN)
  #error "Enable only one of ENDSTOPPULLUP_Z_MIN or ENDSTOPPULLDOWN_Z_MIN."
 #endif
@ -513,7 +513,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
 * Custom Boot and Status screens
 */
-#if DISABLED(DOGLCD) && (ENABLED(SHOW_CUSTOM_BOOTSCREEN) || ENABLED(CUSTOM_STATUS_SCREEN_IMAGE))
+#if DISABLED(DOGLCD) && EITHER(SHOW_CUSTOM_BOOTSCREEN, CUSTOM_STATUS_SCREEN_IMAGE)
  #error "Graphical LCD is required for SHOW_CUSTOM_BOOTSCREEN and CUSTOM_STATUS_SCREEN_IMAGE."
 #endif
@ -568,9 +568,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #if ENABLED(BABYSTEPPING)
  #if ENABLED(SCARA)
    #error "BABYSTEPPING is not implemented for SCARA yet."
-  #elif ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
+  #elif BOTH(DELTA, BABYSTEP_XY)
    #error "BABYSTEPPING only implemented for Z axis on deltabots."
-  #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && ENABLED(MESH_BED_LEVELING)
+  #elif BOTH(BABYSTEP_ZPROBE_OFFSET, MESH_BED_LEVELING)
    #error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination"
  #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE
    #error "BABYSTEP_ZPROBE_OFFSET requires a probe."
@ -580,7 +580,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
    #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET."
  #elif ENABLED(BABYSTEP_HOTEND_Z_OFFSET) && !HAS_HOTEND_OFFSET
    #error "BABYSTEP_HOTEND_Z_OFFSET requires 2 or more HOTENDS."
-  #elif ENABLED(BABYSTEP_ALWAYS_AVAILABLE) && ENABLED(MOVE_Z_WHEN_IDLE)
+  #elif BOTH(BABYSTEP_ALWAYS_AVAILABLE, MOVE_Z_WHEN_IDLE)
    #error "BABYSTEP_ALWAYS_AVAILABLE and MOVE_Z_WHEN_IDLE are incompatible."
  #endif
 #endif
@ -641,7 +641,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
 * Individual axis homing is useless for DELTAS
 */
-#if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA)
+#if BOTH(INDIVIDUAL_AXIS_HOMING_MENU, DELTA)
  #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics."
 #endif
@ -810,7 +810,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
    #error "Enable only one of PARKING_EXTRUDER and MAGNETIC_PARKING_EXTRUDER."
  #elif EXTRUDERS != 2
    #error "PARKING_EXTRUDER requires exactly 2 EXTRUDERS."
-  #elif !PIN_EXISTS(SOL0) || !PIN_EXISTS(SOL1)
+  #elif !PIN_EXISTS(SOL0, SOL1)
    #error "PARKING_EXTRUDER requires SOL0_PIN and SOL1_PIN."
  #elif !defined(PARKING_EXTRUDER_PARKING_X)
    #error "PARKING_EXTRUDER requires PARKING_EXTRUDER_PARKING_X."
@ -907,7 +907,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
 * Bed Heating Options - PID vs Limit Switching
 */
-#if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING)
+#if BOTH(PIDTEMPBED, BED_LIMIT_SWITCHING)
  #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
 #endif
@ -974,7 +974,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  /**
   * Z_PROBE_SLED is incompatible with DELTA
   */
-  #if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA)
+  #if BOTH(Z_PROBE_SLED, DELTA)
    #error "You cannot use Z_PROBE_SLED with DELTA."
  #endif
@ -1087,7 +1087,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 * Bed Leveling Requirements
 */
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_3POINT)
+#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
  static_assert(WITHIN(PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_1_X is outside the probe region.");
  static_assert(WITHIN(PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_2_X is outside the probe region.");
  static_assert(WITHIN(PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_3_X is outside the probe region.");
@ -1221,8 +1221,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
 * Make sure DISABLE_[XYZ] compatible with selected homing options
 */
-#if ENABLED(DISABLE_X) || ENABLED(DISABLE_Y) || ENABLED(DISABLE_Z)
+#if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z)
-  #if ENABLED(HOME_AFTER_DEACTIVATE) || ENABLED(Z_SAFE_HOMING)
+  #if EITHER(HOME_AFTER_DEACTIVATE, Z_SAFE_HOMING)
    #error "DISABLE_[XYZ] is not compatible with HOME_AFTER_DEACTIVATE or Z_SAFE_HOMING."
  #endif
 #endif
@ -1255,7 +1255,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #if ENABLED(SAV_3DGLCD)
  #if DISABLED(U8GLIB_SSD1306) && DISABLED(U8GLIB_SH1106)
    #error "Enable a SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
-  #elif ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106)
+  #elif BOTH(U8GLIB_SSD1306, U8GLIB_SH1106)
    #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
  #endif
 #endif
@ -1334,11 +1334,11 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 */
 #if !HAS_HEATER_0
  #error "HEATER_0_PIN not defined for this board."
-#elif !PIN_EXISTS(TEMP_0) && !PIN_EXISTS(MAX6675_SS)
+#elif !ANY_PIN(TEMP_0, MAX6675_SS)
  #error "TEMP_0_PIN not defined for this board."
-#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR)))
+#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PIN_EXISTS(E0_STEP, E0_DIR))
  #error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
-#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !HAS_E0_ENABLE))
+#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
  #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
 #elif TEMP_SENSOR_0 == 0
  #error "TEMP_SENSOR_0 is required."
@ -1356,7 +1356,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
    #error "MAX6675_SS2_PIN (required for TEMP_SENSOR_1) not defined for this board."
  #elif TEMP_SENSOR_1 == 0
    #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
-  #elif !PIN_EXISTS(TEMP_1) && !PIN_EXISTS(MAX6675_SS2)
+  #elif !ANY_PIN(TEMP_1, MAX6675_SS2)
    #error "TEMP_1_PIN not defined for this board."
  #endif
  #if HOTENDS > 2
@ -1434,7 +1434,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
 * Temperature status LEDs
 */
-#if ENABLED(TEMP_STAT_LEDS) && !PIN_EXISTS(STAT_LED_RED) && !PIN_EXISTS(STAT_LED_BLUE)
+#if ENABLED(TEMP_STAT_LEDS) && !ANY_PIN(STAT_LED_RED, STAT_LED_BLUE)
  #error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both."
 #endif
@ -1442,7 +1442,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 * LED Control Menu
 */
 #if ENABLED(LED_CONTROL_MENU) && !HAS_COLOR_LEDS
-  #error "LED_CONTROL_MENU requires BLINKM, RGB_LED, RGBW_LED, PCA9632, or NEOPIXEL_LED."
+  #error "LED_CONTROL_MENU requires BLINKM, RGB_LED, RGBW_LED, PCA9533, PCA9632, or NEOPIXEL_LED."
 #endif
 /**
@ -1467,27 +1467,27 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 */
 #if DISABLED(MK2_MULTIPLEXER) // MK2_MULTIPLEXER uses E0 stepper only
  #if E_STEPPERS
-    #if !(PIN_EXISTS(E0_STEP) && PIN_EXISTS(E0_DIR) && HAS_E0_ENABLE)
+    #if !(PIN_EXISTS(E0_STEP, E0_DIR) && HAS_E0_ENABLE)
      #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
    #endif
    #if E_STEPPERS > 1
-      #if !(PIN_EXISTS(E1_STEP) && PIN_EXISTS(E1_DIR) && HAS_E1_ENABLE)
+      #if !(PIN_EXISTS(E1_STEP, E1_DIR) && HAS_E1_ENABLE)
        #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
      #endif
      #if E_STEPPERS > 2
-        #if !(PIN_EXISTS(E2_STEP) && PIN_EXISTS(E2_DIR) && HAS_E2_ENABLE)
+        #if !(PIN_EXISTS(E2_STEP, E2_DIR) && HAS_E2_ENABLE)
          #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
        #endif
        #if E_STEPPERS > 3
-          #if !(PIN_EXISTS(E3_STEP) && PIN_EXISTS(E3_DIR) && HAS_E3_ENABLE)
+          #if !(PIN_EXISTS(E3_STEP, E3_DIR) && HAS_E3_ENABLE)
            #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
          #endif
          #if E_STEPPERS > 4
-            #if !(PIN_EXISTS(E4_STEP) && PIN_EXISTS(E4_DIR) && HAS_E4_ENABLE)
+            #if !(PIN_EXISTS(E4_STEP, E4_DIR) && HAS_E4_ENABLE)
              #error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
            #endif
            #if E_STEPPERS > 5
-              #if !(PIN_EXISTS(E5_STEP) && PIN_EXISTS(E5_DIR) && HAS_E5_ENABLE)
+              #if !(PIN_EXISTS(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
                #error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board."
              #endif
            #endif // E_STEPPERS > 5
@ -1675,9 +1675,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
 * RGB_LED Requirements
 */
-#define _RGB_TEST (PIN_EXISTS(RGB_LED_R) && PIN_EXISTS(RGB_LED_G) && PIN_EXISTS(RGB_LED_B))
+#define _RGB_TEST (PIN_EXISTS(RGB_LED_R, RGB_LED_G, RGB_LED_B))
 #if ENABLED(PRINTER_EVENT_LEDS) && !HAS_COLOR_LEDS
-  #error "PRINTER_EVENT_LEDS requires BLINKM, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED."
+  #error "PRINTER_EVENT_LEDS requires BLINKM, PCA9533, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED."
 #elif ENABLED(RGB_LED)
  #if !_RGB_TEST
    #error "RGB_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, and RGB_LED_B_PIN."
@ -1813,7 +1813,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
 * Check existing RX/TX pins against enable TMC UART drivers.
 */
-#define INVALID_TMC2208(ST) (AXIS_DRIVER_TYPE(ST, TMC2208) && !(defined(ST##_HARDWARE_SERIAL) || (PIN_EXISTS(ST##_SERIAL_RX) && PIN_EXISTS(ST##_SERIAL_TX))))
+#define INVALID_TMC2208(ST) (AXIS_DRIVER_TYPE(ST, TMC2208) && !(defined(ST##_HARDWARE_SERIAL) || (PIN_EXISTS(ST##_SERIAL_RX, ST##_SERIAL_TX))))
 #if INVALID_TMC2208(X)
  #error "TMC2208 on X requires X_HARDWARE_SERIAL or X_SERIAL_(RX|TX)_PIN."
 #elif INVALID_TMC2208(X2)
@ -1887,7 +1887,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  // is necessary in order to reset the stallGuard indication between the initial movement of all three
  // towers to +Z and the individual homing of each tower. This restriction can be removed once a means of
  // clearing the stallGuard activated status is found.
-  #if ENABLED(DELTA) && !(ENABLED(STEALTHCHOP_XY) && ENABLED(STEALTHCHOP_Z))
+  #if ENABLED(DELTA) && !BOTH(STEALTHCHOP_XY, STEALTHCHOP_Z)
    #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP_XY and STEALTHCHOP_Z."
  #elif X_SENSORLESS && X_HOME_DIR == -1 && (!X_MIN_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_XMIN))
    #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN."
@ -1909,7 +1909,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 // Sensorless homing/probing requirements
 #if ENABLED(SENSORLESS_HOMING) && !(X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS)
  #error "SENSORLESS_HOMING requires a TMC stepper driver with StallGuard on X, Y, or Z axes."
-#elif ENABLED(SENSORLESS_PROBING) && ENABLED(DELTA) && !(X_SENSORLESS && Y_SENSORLESS && Z_SENSORLESS)
+#elif BOTH(SENSORLESS_PROBING, DELTA) && !(X_SENSORLESS && Y_SENSORLESS && Z_SENSORLESS)
  #error "SENSORLESS_PROBING for DELTA requires TMC stepper drivers with StallGuard on X, Y, and Z axes."
 #elif ENABLED(SENSORLESS_PROBING) && !Z_SENSORLESS
  #error "SENSORLESS_PROBING requires a TMC stepper driver with StallGuard on Z."
@ -1981,7 +1981,7 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 #undef _ARR_TEST
-#if ENABLED(CNC_COORDINATE_SYSTEMS) && ENABLED(NO_WORKSPACE_OFFSETS)
+#if BOTH(CNC_COORDINATE_SYSTEMS, NO_WORKSPACE_OFFSETS)
  #error "CNC_COORDINATE_SYSTEMS is incompatible with NO_WORKSPACE_OFFSETS."
 #endif
@ -2036,7 +2036,7 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
  #error "PRINTCOUNTER requires EEPROM_SETTINGS. Please update your Configuration."
 #endif
-#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !(PIN_EXISTS(USB_CS) && PIN_EXISTS(USB_INTR))
+#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PIN_EXISTS(USB_CS, USB_INTR)
  #error "USB_CS_PIN and USB_INTR_PIN are required for USB_FLASH_DRIVE_SUPPORT."
 #endif
--- a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp
+++ b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp
@ -40,7 +40,7 @@
 #include "../../module/planner.h"
 #include "../../module/motion.h"
-#if DISABLED(LCD_PROGRESS_BAR) && ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+#if DISABLED(LCD_PROGRESS_BAR) && BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
  #include "../../feature/filwidth.h"
  #include "../../gcode/parser.h"
 #endif
@ -57,7 +57,7 @@
  LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_I2C_PIN_EN, LCD_I2C_PIN_RW, LCD_I2C_PIN_RS, LCD_I2C_PIN_D4, LCD_I2C_PIN_D5, LCD_I2C_PIN_D6, LCD_I2C_PIN_D7);
-#elif ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)
+#elif EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008)
  LCD_CLASS lcd(LCD_I2C_ADDRESS
    #ifdef DETECT_DEVICE
@ -628,7 +628,7 @@ void MarlinUI::draw_status_message(const bool blink) {
      if (progress > 2) return draw_progress_bar(progress);
    }
-  #elif ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+  #elif BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
    // Alternate Status message and Filament display
    if (ELAPSED(millis(), next_filament_display)) {
--- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
+++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
@ -572,7 +572,7 @@ void MarlinUI::draw_status_screen() {
  if (PAGE_CONTAINS(STATUS_BASELINE - INFO_FONT_ASCENT, STATUS_BASELINE + INFO_FONT_DESCENT)) {
    lcd_moveto(0, STATUS_BASELINE);
-    #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+    #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
      // Alternate Status message and Filament display
      if (ELAPSED(millis(), next_filament_display)) {
        lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA));
--- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
+++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
@ -862,7 +862,7 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
 }
 void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY) || ENABLED(SDSUPPORT)
+  #if EITHER(LCD_SET_PROGRESS_MANUALLY, SDSUPPORT)
    // Since the progress bar involves writing
    // quite a few bytes to GDRAM, only do this
--- a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp
+++ b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp
@ -189,7 +189,7 @@ void MarlinUI::init_lcd() {
    OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH);
  #endif
-  #if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
+  #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
    SET_OUTPUT(LCD_PINS_DC);
    #if !defined(LCD_RESET_PIN)
      #define LCD_RESET_PIN LCD_PINS_RS
@ -497,7 +497,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
  #endif // AUTO_BED_LEVELING_UBL
-  #if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY)
+  #if EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
    const unsigned char cw_bmp[] PROGMEM = {
      B00000011,B11111000,B00000000,
--- a/Marlin/src/lcd/extensible_ui/ui_api.cpp
+++ b/Marlin/src/lcd/extensible_ui/ui_api.cpp
@ -59,7 +59,7 @@
  #include "../../core/utility.h"
 #endif
-#if DO_SWITCH_EXTRUDER || ENABLED(SWITCHING_NOZZLE) || ENABLED(PARKING_EXTRUDER)
+#if DO_SWITCH_EXTRUDER || EITHER(SWITCHING_NOZZLE, PARKING_EXTRUDER)
  #include "../../module/tool_change.h"
 #endif
@ -297,7 +297,7 @@ namespace ExtUI {
  void setActiveTool(const extruder_t extruder, bool no_move) {
    #if EXTRUDERS > 1
      const uint8_t e = extruder - E0;
-      #if DO_SWITCH_EXTRUDER || ENABLED(SWITCHING_NOZZLE) || ENABLED(PARKING_EXTRUDER)
+      #if DO_SWITCH_EXTRUDER || EITHER(SWITCHING_NOZZLE, PARKING_EXTRUDER)
        if (e != active_extruder)
          tool_change(e, 0, no_move);
      #endif
--- a/Marlin/src/lcd/menu/menu.cpp
+++ b/Marlin/src/lcd/menu/menu.cpp
@ -45,7 +45,7 @@
  #include "../../module/probe.h"
 #endif
-#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(ENABLE_LEVELING_FADE_HEIGHT, AUTO_BED_LEVELING_UBL)
  #include "../../feature/bedlevel/bedlevel.h"
 #endif
@ -205,7 +205,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint32_t encoder/*=0*/) {
      lcd_z_fade_height = planner.z_fade_height;
    #endif
-    #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) && ENABLED(BABYSTEPPING)
+    #if BOTH(DOUBLECLICK_FOR_Z_BABYSTEPPING, BABYSTEPPING)
      static millis_t doubleclick_expire_ms = 0;
      // Going to menu_main from status screen? Remember first click time.
      // Going back to status screen within a very short time? Go to Z babystepping.
@ -405,7 +405,7 @@ void MarlinUI::completion_feedback(const bool good/*=true*/) {
 #endif // BABYSTEP_ZPROBE_OFFSET
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE)
+#if ANY(AUTO_BED_LEVELING_UBL, PID_AUTOTUNE_MENU, ADVANCED_PAUSE_FEATURE)
  void lcd_enqueue_command(const char * const cmd) {
    no_reentry = true;
--- a/Marlin/src/lcd/menu/menu.h
+++ b/Marlin/src/lcd/menu/menu.h
@ -82,7 +82,7 @@ FORCE_INLINE void draw_menu_item_edit_P(const bool sel, const uint8_t row, PGM_P
  FORCE_INLINE void draw_menu_item_sdfolder(const bool sel, const uint8_t row, PGM_P const pstr, CardReader &theCard) { draw_sd_menu_item(sel, row, pstr, theCard, true); }
 #endif
-#if HAS_GRAPHICAL_LCD && (ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY))
+#if HAS_GRAPHICAL_LCD && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
  void _lcd_zoffset_overlay_gfx(const float zvalue);
 #endif
@ -340,13 +340,13 @@ void menu_move();
 void lcd_move_z();
 void _lcd_draw_homing();
-#define HAS_LINE_TO_Z (ENABLED(DELTA) || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING) || ENABLED(LEVEL_BED_CORNERS))
+#define HAS_LINE_TO_Z ANY(DELTA, PROBE_MANUALLY, MESH_BED_LEVELING, LEVEL_BED_CORNERS)
 #if HAS_LINE_TO_Z
  void line_to_z(const float &z);
 #endif
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE)
+#if ANY(AUTO_BED_LEVELING_UBL, PID_AUTOTUNE_MENU, ADVANCED_PAUSE_FEATURE)
  void lcd_enqueue_command(const char * const cmd);
  void lcd_enqueue_commands_P(PGM_P const cmd);
 #endif
--- a/Marlin/src/lcd/menu/menu_advanced.cpp
+++ b/Marlin/src/lcd/menu/menu_advanced.cpp
@ -321,7 +321,7 @@ void menu_tmc();
  #endif // PID_PARAMS_PER_HOTEND
 #endif // HOTENDS
-#define SHOW_MENU_ADVANCED_TEMPERATURE ((ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(PID_EDIT_MENU))
+#define SHOW_MENU_ADVANCED_TEMPERATURE ((ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND) || EITHER(PID_AUTOTUNE_MENU, PID_EDIT_MENU))
 //
 // Advanced Settings > Temperature
--- a/Marlin/src/lcd/menu/menu_bed_leveling.cpp
+++ b/Marlin/src/lcd/menu/menu_bed_leveling.cpp
@ -36,7 +36,7 @@
  #include "../../module/probe.h"
 #endif
-#if ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING)
+#if EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)
  #include "../../module/motion.h"
  #include "../../gcode/queue.h"
@ -244,7 +244,7 @@ void menu_bed_leveling() {
  #endif
  // Level Bed
-  #if ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING)
+  #if EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)
    // Manual leveling uses a guided procedure
    MENU_ITEM(submenu, MSG_LEVEL_BED, _lcd_level_bed_continue);
  #else
--- a/Marlin/src/lcd/menu/menu_configuration.cpp
+++ b/Marlin/src/lcd/menu/menu_configuration.cpp
@ -275,7 +275,7 @@ void menu_configuration() {
    //
    // Delta Calibration
    //
-    #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
+    #if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION)
      MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, menu_delta_calibrate);
    #endif
--- a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
+++ b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
@ -26,7 +26,7 @@
 #include "../../inc/MarlinConfigPre.h"
-#if HAS_LCD_MENU && (ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION))
+#if HAS_LCD_MENU && EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION)
 #include "menu.h"
 #include "../../module/delta.h"
--- a/Marlin/src/lcd/menu/menu_led.cpp
+++ b/Marlin/src/lcd/menu/menu_led.cpp
@ -58,7 +58,7 @@ void menu_led_custom() {
  MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_R, &leds.color.r, 0, 255, leds.update, true);
  MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_G, &leds.color.g, 0, 255, leds.update, true);
  MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_B, &leds.color.b, 0, 255, leds.update, true);
-  #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+  #if EITHER(RGBW_LED, NEOPIXEL_LED)
    MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_W, &leds.color.w, 0, 255, leds.update, true);
    #if ENABLED(NEOPIXEL_LED)
      MENU_ITEM_EDIT_CALLBACK(uint8, MSG_LED_BRIGHTNESS, &leds.color.i, 0, 255, leds.update, true);
--- a/Marlin/src/lcd/menu/menu_main.cpp
+++ b/Marlin/src/lcd/menu/menu_main.cpp
@ -46,8 +46,8 @@
  #include "../../feature/host_actions.h"
 #endif
-#define MACHINE_CAN_STOP (ENABLED(SDSUPPORT) || ENABLED(HOST_PROMPT_SUPPORT) || defined(ACTION_ON_CANCEL))
+#define MACHINE_CAN_STOP (EITHER(SDSUPPORT, HOST_PROMPT_SUPPORT) || defined(ACTION_ON_CANCEL))
-#define MACHINE_CAN_PAUSE (ENABLED(SDSUPPORT) || ENABLED(HOST_PROMPT_SUPPORT) || ENABLED(PARK_HEAD_ON_PAUSE) || defined(ACTION_ON_PAUSE))
+#define MACHINE_CAN_PAUSE (ANY(SDSUPPORT, HOST_PROMPT_SUPPORT, PARK_HEAD_ON_PAUSE) || defined(ACTION_ON_PAUSE))
 #if MACHINE_CAN_PAUSE
--- a/Marlin/src/lcd/menu/menu_motion.cpp
+++ b/Marlin/src/lcd/menu/menu_motion.cpp
@ -335,7 +335,7 @@ void menu_move() {
  else
    MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
-  #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE)
+  #if EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
    #if EXTRUDERS == 6
      switch (active_extruder) {
@ -376,7 +376,7 @@ void menu_move() {
  #endif
-  #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE)
+  #if EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
    // Only the current...
    MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount);
--- a/Marlin/src/lcd/menu/menu_tune.cpp
+++ b/Marlin/src/lcd/menu/menu_tune.cpp
@ -107,7 +107,7 @@ void menu_tune() {
  //
  // Manual bed leveling, Bed Z:
  //
-  #if ENABLED(MESH_BED_LEVELING) && ENABLED(LCD_BED_LEVELING)
+  #if BOTH(MESH_BED_LEVELING, LCD_BED_LEVELING)
    MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1);
  #endif
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@ -23,7 +23,7 @@
 #include "../inc/MarlinConfigPre.h"
 // These displays all share the MarlinUI class
-#if HAS_SPI_LCD || ENABLED(MALYAN_LCD) || ENABLED(EXTENSIBLE_UI)
+#if HAS_SPI_LCD || EITHER(MALYAN_LCD, EXTENSIBLE_UI)
  #include "ultralcd.h"
  MarlinUI ui;
  #include "../sd/cardreader.h"
@ -106,7 +106,7 @@
 uint8_t MarlinUI::lcd_status_update_delay = 1; // First update one loop delayed
-#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+#if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
  millis_t MarlinUI::next_filament_display; // = 0
 #endif
@ -181,7 +181,7 @@ millis_t next_button_update_ms;
    return click;
  }
-  #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
+  #if EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
    bool MarlinUI::external_control; // = false
@ -449,7 +449,7 @@ void MarlinUI::status_screen() {
  #if HAS_LCD_MENU
    if (use_click()) {
-      #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+      #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
        next_filament_display = millis() + 5000UL;  // Show status message for 5s
      #endif
      goto_screen(menu_main);
@ -638,7 +638,7 @@ LCDViewAction MarlinUI::lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW;
 bool MarlinUI::detected() {
  return
-    #if (ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)) && defined(DETECT_DEVICE)
+    #if EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008) && defined(DETECT_DEVICE)
      lcd.LcdDetected() == 1
    #else
      true
@ -1008,7 +1008,7 @@ void MarlinUI::update() {
      #if HAS_DIGITAL_BUTTONS
-        #if BUTTON_EXISTS(EN1) || BUTTON_EXISTS(EN2) || BUTTON_EXISTS(ENC) || BUTTON_EXISTS(BACK)
+        #if ANY_BUTTON(EN1, EN2, ENC, BACK)
          uint8_t newbutton = 0;
@ -1034,7 +1034,7 @@ void MarlinUI::update() {
        //
        // Directional buttons
        //
-        #if BUTTON_EXISTS(UP) || BUTTON_EXISTS(DWN) || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT)
+        #if ANY_BUTTON(UP, DWN, LFT, RT)
          const int8_t pulses = (ENCODER_PULSES_PER_STEP) * encoderDirection;
@ -1175,7 +1175,7 @@ void MarlinUI::update() {
      #endif
    #endif
-    #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+    #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
      next_filament_display = millis() + 5000UL; // Show status message for 5s
    #endif
--- a/Marlin/src/lcd/ultralcd.h
+++ b/Marlin/src/lcd/ultralcd.h
@ -27,18 +27,13 @@
  #include "../libs/buzzer.h"
 #endif
-#define HAS_DIGITAL_BUTTONS (!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)        \
+#define HAS_DIGITAL_BUTTONS (!HAS_ADC_BUTTONS && ENABLED(NEWPANEL) || BUTTON_EXISTS(EN1, EN2) || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT))
                            || (BUTTON_EXISTS(EN1) && BUTTON_EXISTS(EN2)) \
                            || BUTTON_EXISTS(ENC) || BUTTON_EXISTS(BACK)  \
                            || BUTTON_EXISTS(UP)  || BUTTON_EXISTS(DWN)   \
                            || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT))
 #define HAS_SHIFT_ENCODER   (!HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_SPI_LCD && DISABLED(NEWPANEL))))
-#define HAS_ENCODER_WHEEL  ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || (BUTTON_EXISTS(EN1) && BUTTON_EXISTS(EN2)) )
+#define HAS_ENCODER_WHEEL  ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTON_EXISTS(EN1, EN2))
 #define HAS_ENCODER_ACTION (HAS_LCD_MENU || ENABLED(ULTIPANEL_FEEDMULTIPLY))
 // I2C buttons must be read in the main thread
-#define HAS_SLOW_BUTTONS (ENABLED(LCD_I2C_VIKI) || ENABLED(LCD_I2C_PANELOLU2))
+#define HAS_SLOW_BUTTONS EITHER(LCD_I2C_VIKI, LCD_I2C_PANELOLU2)
 #if HAS_SPI_LCD
@ -188,7 +183,7 @@
 #else
  #undef BUTTON_EXISTS
-  #define BUTTON_EXISTS(BN) false
+  #define BUTTON_EXISTS(...) false
  // Shift register bits correspond to buttons:
  #define BL_LE 7   // Left
@ -267,7 +262,7 @@ public:
  static void clear_lcd();
  static void init_lcd();
-  #if HAS_SPI_LCD || ENABLED(MALYAN_LCD) || ENABLED(EXTENSIBLE_UI)
+  #if HAS_SPI_LCD || EITHER(MALYAN_LCD, EXTENSIBLE_UI)
    static void init();
    static void update();
    static void set_alert_status_P(PGM_P message);
@ -343,7 +338,7 @@ public:
        static inline void refresh_contrast() { set_contrast(contrast); }
      #endif
-      #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+      #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
        static millis_t next_filament_display;
      #endif
@ -466,13 +461,13 @@ public:
  #endif
-  #if ENABLED(LCD_BED_LEVELING) && (ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))
+  #if ENABLED(LCD_BED_LEVELING) && EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)
    static bool wait_for_bl_move;
  #else
    static constexpr bool wait_for_bl_move = false;
  #endif
-  #if HAS_LCD_MENU && (ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION))
+  #if HAS_LCD_MENU && EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
    static bool external_control;
    FORCE_INLINE static void capture() { external_control = true; }
    FORCE_INLINE static void release() { external_control = false; }
@ -493,7 +488,7 @@ public:
    #endif
    static void update_buttons();
    static inline bool button_pressed() { return BUTTON_CLICK(); }
-    #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
+    #if EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
      static void wait_for_release();
    #endif
--- a/Marlin/src/libs/hex_print_routines.cpp
+++ b/Marlin/src/libs/hex_print_routines.cpp
@ -23,7 +23,7 @@
 #include "../inc/MarlinConfig.h"
 #include "../gcode/parser.h"
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(M100_FREE_MEMORY_WATCHER) || ENABLED(DEBUG_GCODE_PARSER) || ENABLED(TMC_DEBUG)
+#if ANY(AUTO_BED_LEVELING_UBL, M100_FREE_MEMORY_WATCHER, DEBUG_GCODE_PARSER, TMC_DEBUG)
  #include "hex_print_routines.h"
--- a/Marlin/src/libs/least_squares_fit.cpp
+++ b/Marlin/src/libs/least_squares_fit.cpp
@ -34,7 +34,7 @@
 #include "../inc/MarlinConfig.h"
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_LINEAR)
+#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_LINEAR)
 #include "least_squares_fit.h"
--- a/Marlin/src/libs/nozzle.cpp
+++ b/Marlin/src/libs/nozzle.cpp
@ -22,7 +22,7 @@
 #include "../inc/MarlinConfig.h"
-#if ENABLED(NOZZLE_CLEAN_FEATURE) || ENABLED(NOZZLE_PARK_FEATURE)
+#if EITHER(NOZZLE_CLEAN_FEATURE, NOZZLE_PARK_FEATURE)
 #include "nozzle.h"
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@ -56,7 +56,7 @@
 #include "../gcode/gcode.h"
 #include "../Marlin.h"
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
  #include "../HAL/shared/persistent_store_api.h"
 #endif
@ -194,7 +194,7 @@ typedef struct SettingsDataStruct {
          delta_segments_per_second,                    // M665 S
          delta_calibration_radius,                     // M665 B
          delta_tower_angle_trim[ABC];                  // M665 XYZ
-  #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+  #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
    float x2_endstop_adj,                               // M666 X
          y2_endstop_adj,                               // M666 Y
          z2_endstop_adj,                               // M666 Z (S2)
@ -340,7 +340,7 @@ void MarlinSettings::postprocess() {
    fwretract.refresh_autoretract();
  #endif
-  #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+  #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
    planner.recalculate_max_e_jerk();
  #endif
@ -448,7 +448,7 @@ void MarlinSettings::postprocess() {
      #if HAS_CLASSIC_JERK
        EEPROM_WRITE(planner.max_jerk);
-        #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+        #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
          dummy = float(DEFAULT_EJERK);
          EEPROM_WRITE(dummy);
        #endif
@ -624,7 +624,7 @@ void MarlinSettings::postprocess() {
        EEPROM_WRITE(delta_calibration_radius);  // 1 float
        EEPROM_WRITE(delta_tower_angle_trim);    // 3 floats
-      #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+      #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
        _FIELD_TEST(x2_endstop_adj);
@ -757,7 +757,7 @@ void MarlinSettings::postprocess() {
        const fwretract_settings_t autoretract_defaults = { 3, 45, 0, 0, 0, 13, 0, 8 };
        EEPROM_WRITE(autoretract_defaults);
      #endif
-      #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
+      #if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
        EEPROM_WRITE(fwretract.autoretract_enabled);
      #else
        const bool autoretract_enabled = false;
@ -1167,7 +1167,7 @@ void MarlinSettings::postprocess() {
        #if HAS_CLASSIC_JERK
          EEPROM_READ(planner.max_jerk);
-          #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+          #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
            EEPROM_READ(dummy);
          #endif
        #else
@ -1340,7 +1340,7 @@ void MarlinSettings::postprocess() {
          EEPROM_READ(delta_calibration_radius);  // 1 float
          EEPROM_READ(delta_tower_angle_trim);    // 3 floats
-        #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+        #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
          _FIELD_TEST(x2_endstop_adj);
@ -1472,7 +1472,7 @@ void MarlinSettings::postprocess() {
          fwretract_settings_t fwretract_settings;
          EEPROM_READ(fwretract_settings);
        #endif
-        #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
+        #if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
          EEPROM_READ(fwretract.autoretract_enabled);
        #else
          bool autoretract_enabled;
@ -2066,7 +2066,7 @@ void MarlinSettings::reset() {
    delta_calibration_radius = DELTA_CALIBRATION_RADIUS;
    COPY(delta_tower_angle_trim, dta);
-  #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+  #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
    #if ENABLED(X_DUAL_ENDSTOPS)
      endstops.x2_endstop_adj = (
@ -2623,7 +2623,7 @@ void MarlinSettings::reset() {
        , " Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS])
      );
-    #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+    #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
      CONFIG_ECHO_HEADING("Endstop adjustment:");
      CONFIG_ECHO_START();
--- a/Marlin/src/module/endstops.cpp
+++ b/Marlin/src/module/endstops.cpp
@ -36,7 +36,7 @@
  #include HAL_PATH(../HAL, endstop_interrupts.h)
 #endif
-#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
+#if BOTH(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED, SDSUPPORT)
  #include "printcounter.h" // for print_job_timer
 #endif
@ -361,7 +361,7 @@ void Endstops::event_handler() {
      ui.status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP);
    #endif
-    #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
+    #if BOTH(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED, SDSUPPORT)
      if (planner.abort_on_endstop_hit) {
        card.stopSDPrint();
        quickstop_stepper();
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@ -47,7 +47,7 @@
  #include "../feature/bedlevel/bedlevel.h"
 #endif
-#if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
  #include "../lcd/ultralcd.h"
 #endif
@ -964,7 +964,7 @@ void clean_up_after_endstop_or_probe_move() {
 void prepare_move_to_destination() {
  apply_motion_limits(destination);
-  #if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE)
+  #if EITHER(PREVENT_COLD_EXTRUSION, PREVENT_LENGTHY_EXTRUDE)
    if (!DEBUGGING(DRYRUN)) {
      if (destination[E_AXIS] != current_position[E_AXIS]) {
@ -1025,7 +1025,7 @@ bool axis_unhomed_error(const bool x/*=true*/, const bool y/*=true*/, const bool
    if (zz) SERIAL_CHAR('Z');
    SERIAL_ECHOLNPGM(" " MSG_FIRST);
-    #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+    #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
      ui.status_printf_P(0, PSTR(MSG_HOME " %s%s%s " MSG_FIRST), xx ? MSG_X : "", yy ? MSG_Y : "", zz ? MSG_Z : "");
    #endif
    return true;
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@ -128,7 +128,7 @@ float Planner::steps_to_mm[XYZE_N];           // (mm) Millimeters per step
  #endif
 #endif
 #if HAS_CLASSIC_JERK
-  #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+  #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
    float Planner::max_jerk[XYZ];             // (mm/s^2) M205 XYZ - The largest speed change requiring no acceleration.
  #else
    float Planner::max_jerk[XYZE];            // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration.
@ -1751,7 +1751,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
    SERIAL_ECHOLNPGM(" steps)");
  //*/
-  #if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE)
+  #if EITHER(PREVENT_COLD_EXTRUSION, PREVENT_LENGTHY_EXTRUDE)
    if (de) {
      #if ENABLED(PREVENT_COLD_EXTRUSION)
        if (thermalManager.tooColdToExtrude(extruder)) {
@ -2104,7 +2104,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
  const uint8_t moves_queued = nonbusy_movesplanned();
  // Slow down when the buffer starts to empty, rather than wait at the corner for a buffer refill
-  #if ENABLED(SLOWDOWN) || ENABLED(ULTRA_LCD) || defined(XY_FREQUENCY_LIMIT)
+  #if EITHER(SLOWDOWN, ULTRA_LCD) || defined(XY_FREQUENCY_LIMIT)
    // Segment time im micro seconds
    uint32_t segment_time_us = LROUND(1000000.0f / inverse_secs);
  #endif
@ -2172,7 +2172,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
  // Calculate and limit speed in mm/sec for each axis
  float current_speed[NUM_AXIS], speed_factor = 1.0f; // factor <1 decreases speed
  LOOP_XYZE(i) {
-    #if ENABLED(MIXING_EXTRUDER) && ENABLED(RETRACT_SYNC_MIXING)
+    #if BOTH(MIXING_EXTRUDER, RETRACT_SYNC_MIXING)
      // In worst case, only one extruder running, no change is needed.
      // In best case, all extruders run the same amount, we can divide by MIXING_STEPPERS
      float delta_mm_i = 0;
@ -2485,7 +2485,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
    float safe_speed = nominal_speed;
    uint8_t limited = 0;
-    #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+    #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
      LOOP_XYZ(i)
    #else
      LOOP_XYZE(i)
@ -2522,7 +2522,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
      // Now limit the jerk in all axes.
      const float smaller_speed_factor = vmax_junction / previous_nominal_speed;
-      #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+      #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
        LOOP_XYZ(axis)
      #else
        LOOP_XYZE(axis)
@ -2893,7 +2893,7 @@ void Planner::reset_acceleration_rates() {
    if (AXIS_CONDITION) NOLESS(highest_rate, max_acceleration_steps_per_s2[i]);
  }
  cutoff_long = 4294967295UL / highest_rate; // 0xFFFFFFFFUL
-  #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+  #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
    recalculate_max_e_jerk();
  #endif
 }
--- a/Marlin/src/module/planner.h
+++ b/Marlin/src/module/planner.h
@ -159,7 +159,7 @@ typedef struct block_t {
 } block_t;
-#define HAS_POSITION_FLOAT (ENABLED(LIN_ADVANCE) || ENABLED(SCARA_FEEDRATE_SCALING) || ENABLED(GRADIENT_MIX))
+#define HAS_POSITION_FLOAT ANY(LIN_ADVANCE, SCARA_FEEDRATE_SCALING, GRADIENT_MIX)
 #define BLOCK_MOD(n) ((n)&(BLOCK_BUFFER_SIZE-1))
@ -253,7 +253,7 @@ class Planner {
    #if HAS_CLASSIC_JERK
      static float max_jerk[
-        #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+        #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
          XYZ                                    // (mm/s^2) M205 XYZ - The largest speed change requiring no acceleration.
        #else
          XYZE                                   // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration.
@ -861,7 +861,7 @@ class Planner {
      static void autotemp_M104_M109();
    #endif
-    #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+    #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
      FORCE_INLINE static void recalculate_max_e_jerk() {
        #define GET_MAX_E_JERK(N) SQRT(SQRT(0.5) * junction_deviation_mm * (N) * RECIPROCAL(1.0 - SQRT(0.5)))
        #if ENABLED(DISTINCT_E_FACTORS)
--- a/Marlin/src/module/printcounter.h
+++ b/Marlin/src/module/printcounter.h
@ -28,7 +28,7 @@
 // Print debug messages with M111 S2
 //#define DEBUG_PRINTCOUNTER
-#if ENABLED(I2C_EEPROM) || ENABLED(SPI_EEPROM)
+#if EITHER(I2C_EEPROM, SPI_EEPROM)
  // round up address to next page boundary (assuming 32 byte pages)
  #define STATS_EEPROM_ADDRESS 0x40
 #else
@ -57,7 +57,7 @@ class PrintCounter: public Stopwatch {
  private:
    typedef Stopwatch super;
-    #if ENABLED(I2C_EEPROM) || ENABLED(SPI_EEPROM) || defined(CPU_32_BIT)
+    #if EITHER(I2C_EEPROM, SPI_EEPROM) || defined(CPU_32_BIT)
      typedef uint32_t eeprom_address_t;
    #else
      typedef uint16_t eeprom_address_t;
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@ -38,7 +38,7 @@
 #include "../gcode/gcode.h"
 #include "../lcd/ultralcd.h"
-#if ENABLED(BLTOUCH) || ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY) || ENABLED(PROBE_TRIGGERED_WHEN_STOWED_TEST) || (QUIET_PROBING && ENABLED(PROBING_STEPPERS_OFF))
+#if ANY(Z_PROBE_SLED, Z_PROBE_ALLEN_KEY, PROBE_TRIGGERED_WHEN_STOWED_TEST) || (QUIET_PROBING && ENABLED(PROBING_STEPPERS_OFF))
  #include "../Marlin.h" // for stop(), disable_e_steppers
 #endif
@ -416,7 +416,7 @@ bool set_probe_deployed(const bool deploy) {
  if (deploy_stow_condition && unknown_condition)
    do_probe_raise(MAX(Z_CLEARANCE_BETWEEN_PROBES, Z_CLEARANCE_DEPLOY_PROBE));
-  #if ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY)
+  #if EITHER(Z_PROBE_SLED, Z_PROBE_ALLEN_KEY)
    #if ENABLED(Z_PROBE_SLED)
      #define _AUE_ARGS true, false, false
    #else
@ -553,7 +553,7 @@ static bool do_probe_move(const float z, const float fr_mm_s) {
  // Check to see if the probe was triggered
  const bool probe_triggered =
-    #if ENABLED(DELTA) && ENABLED(SENSORLESS_PROBING)
+    #if BOTH(DELTA, SENSORLESS_PROBING)
      endstops.trigger_state() & (_BV(X_MIN) | _BV(Y_MIN) | _BV(Z_MIN))
    #else
      TEST(endstops.trigger_state(),
--- a/Marlin/src/module/stepper.cpp
+++ b/Marlin/src/module/stepper.cpp
@ -153,7 +153,7 @@ bool Stepper::abort_current_block;
 #if Z_MULTI_ENDSTOPS || ENABLED(Z_STEPPER_AUTO_ALIGN)
  bool Stepper::locked_Z_motor = false, Stepper::locked_Z2_motor = false;
 #endif
-#if ENABLED(Z_TRIPLE_ENDSTOPS) || (ENABLED(Z_STEPPER_AUTO_ALIGN) && ENABLED(Z_TRIPLE_STEPPER_DRIVERS))
+#if ENABLED(Z_TRIPLE_ENDSTOPS) || BOTH(Z_STEPPER_AUTO_ALIGN, Z_TRIPLE_STEPPER_DRIVERS)
  bool Stepper::locked_Z3_motor = false;
 #endif
@ -1450,7 +1450,7 @@ void Stepper::stepper_pulse_phase_isr() {
    // Pulse Extruders
    // Tick the E axis, correct error term and update position
-    #if ENABLED(LIN_ADVANCE) || ENABLED(MIXING_EXTRUDER)
+    #if EITHER(LIN_ADVANCE, MIXING_EXTRUDER)
      delta_error[E_AXIS] += advance_dividend[E_AXIS];
      if (delta_error[E_AXIS] >= 0) {
        count_position[E_AXIS] += count_direction[E_AXIS];
@ -1679,7 +1679,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
         * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z, handled below)
         * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X)
         */
-        #if ENABLED(COREXY) || ENABLED(COREXZ)
+        #if EITHER(COREXY, COREXZ)
          #define X_CMP ==
        #else
          #define X_CMP !=
@ -1697,7 +1697,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
         * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y)
         * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z)
         */
-        #if ENABLED(COREYX) || ENABLED(COREYZ)
+        #if EITHER(COREYX, COREYZ)
          #define Y_CMP ==
        #else
          #define Y_CMP !=
@ -1715,7 +1715,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
         * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y, already handled above)
         * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Z)
         */
-        #if ENABLED(COREZX) || ENABLED(COREZY)
+        #if EITHER(COREZX, COREZY)
          #define Z_CMP ==
        #else
          #define Z_CMP !=
@ -2030,7 +2030,7 @@ void Stepper::init() {
  #if HAS_X_ENABLE
    X_ENABLE_INIT;
    if (!X_ENABLE_ON) X_ENABLE_WRITE(HIGH);
-    #if (ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS)) && HAS_X2_ENABLE
+    #if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS) && HAS_X2_ENABLE
      X2_ENABLE_INIT;
      if (!X_ENABLE_ON) X2_ENABLE_WRITE(HIGH);
    #endif
@ -2093,7 +2093,7 @@ void Stepper::init() {
  // Init Step Pins
  #if HAS_X_STEP
-    #if ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)
+    #if EITHER(X_DUAL_STEPPER_DRIVERS, DUAL_X_CARRIAGE)
      X2_STEP_INIT;
      X2_STEP_WRITE(INVERT_X_STEP_PIN);
    #endif
@ -2467,13 +2467,13 @@ void Stepper::report_positions() {
    if (!initialized) return;
    LOOP_L_N(i, COUNT(motor_current_setting)) {
      switch (i) {
-        #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_X) || PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
+        #if ANY_PIN(MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y)
          case 0:
        #endif
        #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
          case 1:
        #endif
-        #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) || PIN_EXISTS(MOTOR_CURRENT_PWM_E0) || PIN_EXISTS(MOTOR_CURRENT_PWM_E1)
+        #if ANY_PIN(MOTOR_CURRENT_PWM_E, MOTOR_CURRENT_PWM_E0, MOTOR_CURRENT_PWM_E1)
          case 2:
        #endif
            digipot_current(i, motor_current_setting[i]);
--- a/Marlin/src/module/stepper.h
+++ b/Marlin/src/module/stepper.h
@ -267,7 +267,7 @@ class Stepper {
    #if Z_MULTI_ENDSTOPS || ENABLED(Z_STEPPER_AUTO_ALIGN)
      static bool locked_Z_motor, locked_Z2_motor;
    #endif
-    #if ENABLED(Z_TRIPLE_ENDSTOPS) || (ENABLED(Z_STEPPER_AUTO_ALIGN) && ENABLED(Z_TRIPLE_STEPPER_DRIVERS))
+    #if ENABLED(Z_TRIPLE_ENDSTOPS) || BOTH(Z_STEPPER_AUTO_ALIGN, Z_TRIPLE_STEPPER_DRIVERS)
      static bool locked_Z3_motor;
    #endif
@ -423,7 +423,7 @@ class Stepper {
      FORCE_INLINE static void set_z_lock(const bool state) { locked_Z_motor = state; }
      FORCE_INLINE static void set_z2_lock(const bool state) { locked_Z2_motor = state; }
    #endif
-    #if ENABLED(Z_TRIPLE_ENDSTOPS) || (ENABLED(Z_STEPPER_AUTO_ALIGN) && ENABLED(Z_TRIPLE_STEPPER_DRIVERS))
+    #if ENABLED(Z_TRIPLE_ENDSTOPS) || BOTH(Z_STEPPER_AUTO_ALIGN, Z_TRIPLE_STEPPER_DRIVERS)
      FORCE_INLINE static void set_z3_lock(const bool state) { locked_Z3_motor = state; }
    #endif
--- a/Marlin/src/module/stepper_indirection.h
+++ b/Marlin/src/module/stepper_indirection.h
@ -618,7 +618,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
    #define    _REV_E_DIR(E)   do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
  #endif
-  #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(MULTI_NOZZLE_DUPLICATION)
+  #if EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
    #define NDIR(N) _DUPE(DIR,!INVERT_E##N##_DIR)
    #define RDIR(N) _DUPE(DIR, INVERT_E##N##_DIR)
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@ -33,13 +33,13 @@
 #include "../core/language.h"
 #include "../HAL/shared/Delay.h"
-#define MAX6675_SEPARATE_SPI (ENABLED(HEATER_0_USES_MAX6675) || ENABLED(HEATER_1_USES_MAX6675)) && PIN_EXISTS(MAX6675_SCK) && PIN_EXISTS(MAX6675_DO)
+#define MAX6675_SEPARATE_SPI EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) && PIN_EXISTS(MAX6675_SCK, MAX6675_DO)
 #if MAX6675_SEPARATE_SPI
  #include "../libs/private_spi.h"
 #endif
-#if ENABLED(BABYSTEPPING) || ENABLED(PID_EXTRUSION_SCALING)
+#if EITHER(BABYSTEPPING, PID_EXTRUSION_SCALING)
  #include "stepper.h"
 #endif
@ -360,8 +360,8 @@ temp_range_t Temperature::temp_range[HOTENDS] = ARRAY_BY_HOTENDS(sensor_heater_0
    #endif
    #if WATCH_BED || WATCH_HOTENDS
-      #define HAS_TP_BED (ENABLED(THERMAL_PROTECTION_BED) && ENABLED(PIDTEMPBED))
+      #define HAS_TP_BED BOTH(THERMAL_PROTECTION_BED, PIDTEMPBED)
-      #if HAS_TP_BED && ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(PIDTEMP)
+      #if HAS_TP_BED && BOTH(THERMAL_PROTECTION_HOTENDS, PIDTEMP)
        #define GTV(B,H) (heater < 0 ? (B) : (H))
      #elif HAS_TP_BED
        #define GTV(B,H) (B)
@ -913,7 +913,7 @@ void Temperature::manage_heater() {
    }
  #endif
-  #if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING)
+  #if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING)
    static bool last_pause_state;
  #endif
@ -1004,12 +1004,12 @@ void Temperature::manage_heater() {
    #if DISABLED(PIDTEMPBED)
      if (PENDING(ms, next_bed_check_ms)
-        #if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING)
+        #if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING)
          && paused == last_pause_state
        #endif
      ) return;
      next_bed_check_ms = ms + BED_CHECK_INTERVAL;
-      #if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING)
+      #if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING)
        last_pause_state = paused;
      #endif
    #endif
@ -1334,7 +1334,7 @@ void Temperature::init() {
  #endif
  #if MB(RUMBA)
-    #define _AD(N) (ENABLED(HEATER_##N##_USES_AD595) || ENABLED(HEATER_##N##_USES_AD8495))
+    #define _AD(N) (ANY(HEATER_##N##_USES_AD595, HEATER_##N##_USES_AD8495))
    #if _AD(0) || _AD(1) || _AD(2) || _AD(3) || _AD(4) || _AD(5) || _AD(BED) || _AD(CHAMBER)
      // Disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector
      MCUCR = _BV(JTD);
@ -1342,7 +1342,7 @@ void Temperature::init() {
    #endif
  #endif
-  #if ENABLED(PIDTEMP) && ENABLED(PID_EXTRUSION_SCALING)
+  #if BOTH(PIDTEMP, PID_EXTRUSION_SCALING)
    last_e_position = 0;
  #endif
@ -2743,7 +2743,7 @@ void Temperature::isr() {
  //
  #if ENABLED(BABYSTEPPING)
-    #if ENABLED(BABYSTEP_XY) || ENABLED(I2C_POSITION_ENCODERS)
+    #if EITHER(BABYSTEP_XY, I2C_POSITION_ENCODERS)
      LOOP_XYZ(axis) {
        const int16_t curTodo = babystepsTodo[axis]; // get rid of volatile for performance
        if (curTodo) {
@ -2942,7 +2942,7 @@ void Temperature::isr() {
  #endif // AUTO_REPORT_TEMPERATURES
-  #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+  #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
    void Temperature::set_heating_message(const uint8_t e) {
      const bool heating = isHeatingHotend(e);
      #if HOTENDS > 1
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@ -739,7 +739,7 @@ class Temperature {
      #endif
    #endif
-    #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+    #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
      static void set_heating_message(const uint8_t e);
    #endif
@ -778,9 +778,9 @@ class Temperature {
    static void updateTemperaturesFromRawValues();
-    #define HAS_MAX6675 (ENABLED(HEATER_0_USES_MAX6675) || ENABLED(HEATER_1_USES_MAX6675))
+    #define HAS_MAX6675 EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675)
    #if HAS_MAX6675
-      #if ENABLED(HEATER_0_USES_MAX6675) && ENABLED(HEATER_1_USES_MAX6675)
+      #if BOTH(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675)
        #define COUNT_6675 2
      #else
        #define COUNT_6675 1
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@ -49,7 +49,7 @@
  #include "../gcode/gcode.h" // for dwell()
 #endif
-#if ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE) || ENABLED(SWITCHING_TOOLHEAD)
+#if ANY(SWITCHING_EXTRUDER, SWITCHING_NOZZLE, SWITCHING_TOOLHEAD)
  #include "servo.h"
 #endif
@ -740,7 +740,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
          singlenozzle_temp[active_extruder] = thermalManager.temp_hotend[0].target;
          if (singlenozzle_temp[tmp_extruder] && singlenozzle_temp[tmp_extruder] != singlenozzle_temp[active_extruder]) {
            thermalManager.setTargetHotend(singlenozzle_temp[tmp_extruder], 0);
-            #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+            #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
              thermalManager.set_heating_message(0);
            #endif
            (void)thermalManager.wait_for_hotend(0, false);  // Wait for heating or cooling
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@ -874,7 +874,7 @@
 #define _EPIN(p,q) __EPIN(p,q)
 // The X2 axis, if any, should be the next open extruder port
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS)
+#if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS)
  #ifndef X2_STEP_PIN
    #define X2_STEP_PIN   _EPIN(E_STEPPERS, STEP)
    #define X2_DIR_PIN    _EPIN(E_STEPPERS, DIR)
--- a/Marlin/src/pins/pins_3DRAG.h
+++ b/Marlin/src/pins/pins_3DRAG.h
@ -75,7 +75,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
+#if BOTH(ULTRA_LCD, NEWPANEL)
  #undef BEEPER_PIN
  #undef LCD_PINS_RS
@ -154,7 +154,7 @@
    #define SPINDLE_LASER_PWM_PIN    46   // MUST BE HARDWARE PWM
    #define SPINDLE_LASER_ENABLE_PIN 62   // Pin should have a pullup!
    #define SPINDLE_DIR_PIN          48
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // use expansion header if no LCD in use
+  #elif !BOTH(ULTRA_LCD, NEWPANEL)     // use expansion header if no LCD in use
    #define SPINDLE_LASER_ENABLE_PIN 16   // Pin should have a pullup/pulldown!
    #define SPINDLE_DIR_PIN          17
  #endif
--- a/Marlin/src/pins/pins_ANET_10.h
+++ b/Marlin/src/pins/pins_ANET_10.h
@ -162,7 +162,7 @@
    #define LCD_PINS_D6      16
    #define LCD_PINS_D7      17
    #define ADC_KEYPAD_PIN    1
-  #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(ANET_FULL_GRAPHICS_LCD)
+  #elif EITHER(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD)
    // Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics
    // display using an adapter board  // https://go.aisler.net/benlye/anet-lcd-adapter/pcb
    // See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748
--- a/Marlin/src/pins/pins_AZTEEG_X3.h
+++ b/Marlin/src/pins/pins_AZTEEG_X3.h
@ -53,7 +53,7 @@
 #undef STAT_LED_RED_PIN
 #undef STAT_LED_BLUE_PIN
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
  #undef DOGLCD_A0
  #undef DOGLCD_CS
@ -75,7 +75,7 @@
 //
 // Misc
 //
-#if ENABLED(CASE_LIGHT_ENABLE)  && PIN_EXISTS(CASE_LIGHT) && PIN_EXISTS(STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN
+#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT, STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN
  #undef STAT_LED_RED_PIN
 #endif
--- a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
+++ b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
@ -139,7 +139,7 @@
 #undef BEEPER_PIN
 #define BEEPER_PIN         33
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
  #undef SD_DETECT_PIN
  #define SD_DETECT_PIN    49   // For easy adapter board
  #undef BEEPER_PIN
@ -152,7 +152,7 @@
 //
 // Misc. Functions
 //
-#if ENABLED(CASE_LIGHT_ENABLE)  && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
+#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
  #undef DOGLCD_A0              // Steal pin 44 for the case light; if you have a Viki2 and have connected it
  #define DOGLCD_A0        57   // following the Panucatt wiring diagram, you may need to tweak these pin assignments
                                // as the wiring diagram uses pin 44 for DOGLCD_A0
@ -166,7 +166,7 @@
 #undef SPINDLE_DIR_PIN
 #if ENABLED(SPINDLE_LASER_ENABLE)   // EXP2 header
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
    #undef BTN_EN2
    #define BTN_EN2             31   // need 7 for the spindle speed PWM
  #endif
--- a/Marlin/src/pins/pins_AZTEEG_X5_GT.h
+++ b/Marlin/src/pins/pins_AZTEEG_X5_GT.h
@ -112,7 +112,7 @@
 // Display
 //
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
  #define BEEPER_PIN       P1_31
  #define DOGLCD_A0        P2_06
  #define DOGLCD_CS        P0_16
--- a/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h
+++ b/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h
@ -143,7 +143,7 @@
      //#define SHIFT_EN   P1_22   // (41)  J5-4 & AUX-4
    #endif
-    #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #if ANY(VIKI2, miniVIKI)
      //#define LCD_SCREEN_ROT_180
      #define BEEPER_PIN   P1_30   // (37) may change if cable changes
--- a/Marlin/src/pins/pins_BEAST.h
+++ b/Marlin/src/pins/pins_BEAST.h
@ -126,7 +126,7 @@
    #define LCD_PINS_RS         49   // CS chip select /SS chip slave select
    #define LCD_PINS_ENABLE     51   // SID (MOSI)
    #define LCD_PINS_D4         52   // SCK (CLK) clock
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
    #define LCD_PINS_RS         PB8
    #define LCD_PINS_ENABLE     PD2
    #define LCD_PINS_D4         PB12
@ -193,7 +193,7 @@
      #define LCD_SDSS          53
      #define SD_DETECT_PIN     49
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
      #define BEEPER_PIN        33
--- a/Marlin/src/pins/pins_CHITU3D.h
+++ b/Marlin/src/pins/pins_CHITU3D.h
@ -125,7 +125,7 @@
    #define LCD_PINS_RS         49   // CS chip select /SS chip slave select
    #define LCD_PINS_ENABLE     51   // SID (MOSI)
    #define LCD_PINS_D4         52   // SCK (CLK) clock
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
    #define LCD_PINS_RS         PB8
    #define LCD_PINS_ENABLE     PD2
    #define LCD_PINS_D4         PB12
@ -192,7 +192,7 @@
      #define LCD_SDSS          53
      #define SD_DETECT_PIN     49
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
      #define BEEPER_PIN        33
--- a/Marlin/src/pins/pins_FELIX2.h
+++ b/Marlin/src/pins/pins_FELIX2.h
@ -49,7 +49,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
+#if BOTH(ULTRA_LCD, NEWPANEL)
  #define SD_DETECT_PIN     6
--- a/Marlin/src/pins/pins_FORMBOT_RAPTOR2.h
+++ b/Marlin/src/pins/pins_FORMBOT_RAPTOR2.h
@ -35,9 +35,7 @@
  #define FIL_RUNOUT_PIN   22
 #endif
-#define GREEDY_PANEL (   ENABLED(PANEL_ONE) || ENABLED(VIKI2)     \
+#define GREEDY_PANEL ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)
                      || ENABLED(miniVIKI)  || ENABLED(MINIPANEL) \
                      || ENABLED(REPRAPWORLD_KEYPAD) )
 //
 // M3/M4/M5 - Spindle/Laser Control
--- a/Marlin/src/pins/pins_MEGATRONICS.h
+++ b/Marlin/src/pins/pins_MEGATRONICS.h
@ -104,7 +104,7 @@
 //
 #define BEEPER_PIN         33
-#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
+#if BOTH(ULTRA_LCD, NEWPANEL)
  #define LCD_PINS_RS     16
  #define LCD_PINS_ENABLE 17
--- a/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h
+++ b/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h
@ -175,9 +175,9 @@
 #endif
 #ifndef FAN_PIN
-  #if ENABLED(IS_EFB) || ENABLED(IS_EFF)       // Hotend, Fan, Bed or Hotend, Fan, Fan
+  #if EITHER(IS_EFB, IS_EFF)                      // Hotend, Fan, Bed or Hotend, Fan, Fan
    #define FAN_PIN        EX2_HEAT_PIN
-  #elif ENABLED(IS_EEF) || ENABLED(IS_SF)      // Hotend, Hotend, Fan or Spindle, Fan
+  #elif EITHER(IS_EEF, IS_SF)                     // Hotend, Hotend, Fan or Spindle, Fan
    #define FAN_PIN        HBP_PIN
  #else
    #define FAN_PIN        EXTRA_FET_PIN
--- a/Marlin/src/pins/pins_MKS_GEN_13.h
+++ b/Marlin/src/pins/pins_MKS_GEN_13.h
@ -56,7 +56,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
  /**
   * VIKI2 Has two groups of wires with...
   *
--- a/Marlin/src/pins/pins_MKS_SBASE.h
+++ b/Marlin/src/pins/pins_MKS_SBASE.h
@ -245,7 +245,7 @@
  #define LCD_SDSS         P0_28   // EXP2.4
  #define LCD_PINS_ENABLE  P0_18   // EXP1.3
  #define LCD_PINS_D4      P0_15   // EXP1.5
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
    #define DOGLCD_SCK     SCK_PIN
    #define DOGLCD_MOSI    MOSI_PIN
  #endif
--- a/Marlin/src/pins/pins_PRINTRBOARD.h
+++ b/Marlin/src/pins/pins_PRINTRBOARD.h
@ -123,7 +123,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
+#if BOTH(ULTRA_LCD, NEWPANEL)
  #define LCD_PINS_RS       9   // E1       JP11-11
  #define LCD_PINS_ENABLE   8   // E0       JP11-10
@ -132,7 +132,7 @@
  #define LCD_PINS_D6       5   // D5       JP11-6
  #define LCD_PINS_D7       4   // D4       JP11-5
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
    #define BEEPER_PIN      8   // E0       JP11-10
    #define DOGLCD_A0      40   // F2       JP2-2
--- a/Marlin/src/pins/pins_PRINTRBOARD_REVF.h
+++ b/Marlin/src/pins/pins_PRINTRBOARD_REVF.h
@ -208,7 +208,7 @@
  #define LCD_PINS_D6       5   // D5       JP11-6
  #define LCD_PINS_D7       4   // D4       JP11-5
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
    #define BEEPER_PIN      8   // E0       JP11-10
    #define DOGLCD_A0      40   // F2       JP2-2
--- a/Marlin/src/pins/pins_RAMBO.h
+++ b/Marlin/src/pins/pins_RAMBO.h
@ -175,7 +175,7 @@
    #define LCD_PINS_D6     74
    #define LCD_PINS_D7     75
-    #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #if ANY(VIKI2, miniVIKI)
      #define BEEPER_PIN   44
      // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the
      //     beeper/buzzer is connected to pin 33; however, the pin used in the
--- a/Marlin/src/pins/pins_RAMPS.h
+++ b/Marlin/src/pins/pins_RAMPS.h
@ -199,13 +199,13 @@
 #endif
 #ifndef FAN_PIN
-  #if ENABLED(IS_RAMPS_EFB) || ENABLED(IS_RAMPS_EFF)  // Hotend, Fan, Bed or Hotend, Fan, Fan
+  #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF)          // Hotend, Fan, Bed or Hotend, Fan, Fan
    #define FAN_PIN        RAMPS_D9_PIN
-  #elif ENABLED(IS_RAMPS_EEF) || ENABLED(IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan
+  #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF)         // Hotend, Hotend, Fan or Spindle, Fan
    #define FAN_PIN        RAMPS_D8_PIN
-  #elif ENABLED(IS_RAMPS_EEB)                         // Hotend, Hotend, Bed
+  #elif ENABLED(IS_RAMPS_EEB)                  // Hotend, Hotend, Bed
-    #define FAN_PIN         4   // IO pin. Buffer needed
+    #define FAN_PIN         4                  // IO pin. Buffer needed
-  #else                                               // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
+  #else                                        // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
    #define FAN_PIN        RAMPS_D9_PIN
  #endif
 #endif
@ -232,8 +232,7 @@
 #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENABLE_PIN)
  #if NUM_SERVOS <= 1 // try to use servo connector first
    #define CASE_LIGHT_PIN    6   // MUST BE HARDWARE PWM
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
+  #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))  // try to use AUX 2
      && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD)))  // try to use AUX 2
    #define CASE_LIGHT_PIN   44   // MUST BE HARDWARE PWM
  #endif
 #endif
@ -246,8 +245,7 @@
    #define SPINDLE_LASER_ENABLE_PIN  4   // Pin should have a pullup/pulldown!
    #define SPINDLE_LASER_PWM_PIN     6   // MUST BE HARDWARE PWM
    #define SPINDLE_DIR_PIN           5
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
+  #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))  // try to use AUX 2
      && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD)))  // try to use AUX 2
    #define SPINDLE_LASER_ENABLE_PIN 40   // Pin should have a pullup/pulldown!
    #define SPINDLE_LASER_PWM_PIN    44   // MUST BE HARDWARE PWM
    #define SPINDLE_DIR_PIN          65
@ -347,7 +345,7 @@
    #define LCD_PINS_ENABLE     51   // SID (MOSI)
    #define LCD_PINS_D4         52   // SCK (CLK) clock
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
    #define LCD_PINS_RS         40
    #define LCD_PINS_ENABLE     42
@ -379,7 +377,7 @@
    #else
-      #if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
+      #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
        #define LCD_PINS_DC     25   // Set as output on init
        #define LCD_PINS_RS     27   // Pull low for 1s to init
        // DOGM SPI LCD Support
@ -463,7 +461,7 @@
      #define LCD_SDSS          SDSS
      #define SD_DETECT_PIN     49
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
      #define DOGLCD_CS         45
      #define DOGLCD_A0         44
--- a/Marlin/src/pins/pins_RAMPS_DUO.h
+++ b/Marlin/src/pins/pins_RAMPS_DUO.h
@ -76,7 +76,7 @@
 //
 #if ENABLED(ULTRA_LCD)
-  #if ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #if BOTH(NEWPANEL, PANEL_ONE)
    #undef LCD_PINS_D4
    #define LCD_PINS_D4  68
--- a/Marlin/src/pins/pins_RAMPS_FD_V1.h
+++ b/Marlin/src/pins/pins_RAMPS_FD_V1.h
@ -161,7 +161,7 @@
    #define DOGLCD_A0      27
  #endif
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
    #define DOGLCD_A0           16
    #define KILL_PIN            51
    #define STAT_LED_BLUE_PIN   29
--- a/Marlin/src/pins/pins_RAMPS_LINUX.h
+++ b/Marlin/src/pins/pins_RAMPS_LINUX.h
@ -220,8 +220,7 @@
 #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENABLE_PIN)
  #if NUM_SERVOS <= 1 // try to use servo connector first
    #define CASE_LIGHT_PIN    6   // MUST BE HARDWARE PWM
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
+  #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))  // try to use AUX 2
      && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD)))  // try to use AUX 2
    #define CASE_LIGHT_PIN   44   // MUST BE HARDWARE PWM
  #endif
 #endif
@ -234,8 +233,7 @@
    #define SPINDLE_LASER_ENABLE_PIN  4   // Pin should have a pullup/pulldown!
    #define SPINDLE_LASER_PWM_PIN     6   // MUST BE HARDWARE PWM
    #define SPINDLE_DIR_PIN           5
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
+  #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))  // try to use AUX 2
      && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD)))  // try to use AUX 2
    #define SPINDLE_LASER_ENABLE_PIN 40   // Pin should have a pullup/pulldown!
    #define SPINDLE_LASER_PWM_PIN    44   // MUST BE HARDWARE PWM
    #define SPINDLE_DIR_PIN          65
@ -335,7 +333,7 @@
    #define LCD_PINS_ENABLE     51   // SID (MOSI)
    #define LCD_PINS_D4         52   // SCK (CLK) clock
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
    #define LCD_PINS_RS         40
    #define LCD_PINS_ENABLE     42
@ -367,7 +365,7 @@
    #else
-      #if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
+      #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
        #define LCD_PINS_DC     25   // Set as output on init
        #define LCD_PINS_RS     27   // Pull low for 1s to init
        // DOGM SPI LCD Support
@ -451,7 +449,7 @@
      #define LCD_SDSS          SDSS
      #define SD_DETECT_PIN     49
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
      #define DOGLCD_CS         45
      #define DOGLCD_A0         44
--- a/Marlin/src/pins/pins_RAMPS_PLUS.h
+++ b/Marlin/src/pins/pins_RAMPS_PLUS.h
@ -73,7 +73,7 @@
 #undef E0_CS_PIN
 #undef E1_CS_PIN
-#if ENABLED(ULTRA_LCD) && DISABLED(REPRAPWORLD_GRAPHICAL_LCD) && (DISABLED(NEWPANEL) || DISABLED(PANEL_ONE)) && DISABLED(CR10_STOCKDISPLAY)
+#if ENABLED(ULTRA_LCD) && DISABLED(REPRAPWORLD_GRAPHICAL_LCD) && !BOTH(NEWPANEL, PANEL_ONE) && DISABLED(CR10_STOCKDISPLAY)
  #if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
    #undef LCD_PINS_RS
    #define LCD_PINS_RS     42   // 3DYMY boards pin 16 -> 42
--- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h
+++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h
@ -173,13 +173,13 @@
 #endif
 #ifndef FAN_PIN
-  #if ENABLED(IS_RAMPS_EFB) || ENABLED(IS_RAMPS_EFF)   // Hotend, Fan, Bed or Hotend, Fan, Fan
+  #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF)          // Hotend, Fan, Bed or Hotend, Fan, Fan
    #define FAN_PIN        RAMPS_D9_PIN
-  #elif ENABLED(IS_RAMPS_EEF) || ENABLED(IS_RAMPS_SF)  // Hotend, Hotend, Fan or Spindle, Fan
+  #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF)         // Hotend, Hotend, Fan or Spindle, Fan
    #define FAN_PIN        RAMPS_D8_PIN
-  #elif ENABLED(IS_RAMPS_EEB)                          // Hotend, Hotend, Bed
+  #elif ENABLED(IS_RAMPS_EEB)                  // Hotend, Hotend, Bed
-    #define FAN_PIN        P1_18   // (4) IO pin. Buffer needed
+    #define FAN_PIN        P1_18               // (4) IO pin. Buffer needed
-  #else                                                // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
+  #else                                        // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
    #define FAN_PIN        RAMPS_D9_PIN
  #endif
 #endif
@ -293,7 +293,7 @@
    //#define SHIFT_EN     P1_22   // (41)  J5-4 & AUX-4
  #endif
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
    // #define LCD_SCREEN_ROT_180
    #define BTN_EN1        P3_26   // (31) J3-2 & AUX-4
--- a/Marlin/src/pins/pins_RUMBA.h
+++ b/Marlin/src/pins/pins_RUMBA.h
@ -167,7 +167,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
+#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
  #define LCD_PINS_DC      38   // Set as output on init
  #define LCD_PINS_RS      41   // Pull low for 1s to init
  // DOGM SPI LCD Support
--- a/Marlin/src/pins/pins_RURAMPS4D_11.h
+++ b/Marlin/src/pins/pins_RURAMPS4D_11.h
@ -202,7 +202,7 @@
 //
 #if ENABLED(ULTRA_LCD)
-  #if ENABLED(RADDS_DISPLAY) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+  #if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
    #define BEEPER_PIN      62
--- a/Show More
+++ b/Show More