diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index eb77556b65..1f0bc0559b 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index dfdd17e4ee..42827a6eed 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/HAL/HAL_AVR/SanityCheck.h b/Marlin/src/HAL/HAL_AVR/SanityCheck.h
index f2907205d7..254da910c1 100644
--- a/Marlin/src/HAL/HAL_AVR/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_AVR/SanityCheck.h
@@ -99,7 +99,7 @@
 /**
  * TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
  */
-#if ENABLED(HAVE_TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
+#if HAS_DRIVER(TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
        defined(X_HARDWARE_SERIAL ) \
     || defined(X2_HARDWARE_SERIAL) \
     || defined(Y_HARDWARE_SERIAL ) \
diff --git a/Marlin/src/HAL/HAL_DUE/SanityCheck.h b/Marlin/src/HAL/HAL_DUE/SanityCheck.h
index 16e07bd3b4..f24233a859 100644
--- a/Marlin/src/HAL/HAL_DUE/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_DUE/SanityCheck.h
@@ -41,7 +41,7 @@
  */
 #define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN))
 
-#if ENABLED(SDSUPPORT) && ENABLED(HAVE_TMC2130)
+#if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
   #if ENABLED(TMC_USE_SW_SPI)
     #if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
       #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
diff --git a/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h b/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
index a408a6c587..16299696a1 100644
--- a/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
@@ -66,7 +66,7 @@
   #endif
 #endif // SPINDLE_LASER_ENABLE
 
-#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && ENABLED(HAVE_TMC2130) && DISABLED(TMC_USE_SW_SPI) \
+#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI) \
     && (MB(RAMPS_14_RE_ARM_EFB) \
     ||  MB(RAMPS_14_RE_ARM_EEB) \
     ||  MB(RAMPS_14_RE_ARM_EFF) \
diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index dde04cca07..5e46d86fdc 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -712,10 +712,10 @@ void setup() {
   SERIAL_PROTOCOLLNPGM("start");
   SERIAL_ECHO_START();
 
-  #if ENABLED(HAVE_TMC2130)
+  #if HAS_DRIVER(TMC2130)
     tmc_init_cs_pins();
   #endif
-  #if ENABLED(HAVE_TMC2208)
+  #if HAS_DRIVER(TMC2208)
     tmc2208_serial_begin();
   #endif
 
diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h
index eb77556b65..1f0bc0559b 100644
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index dfdd17e4ee..42827a6eed 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 9cc0a4d5ab..57a17b0918 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
index 0cc9e3e94f..e4508b29d4 100644
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h
index 6ad6d95743..f0e6ead230 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@@ -571,6 +571,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 #define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index dc255f7a4c..24b3ddb208 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 276cd91e47..afc6831015 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
index bc9a5e1528..6cb02526ca 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index dfdd17e4ee..42827a6eed 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index a76fa7d5e8..05727fcc91 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
index d2b924df97..840e7fb767 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index d5edc5950a..3592978455 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
index 5d37faa9ab..891a722e01 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@@ -552,6 +552,29 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 #define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 077bdbe10b..d5f94fb7ba 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -845,15 +845,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -863,8 +865,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -875,8 +879,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1044,23 +1050,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1106,62 +1101,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1316,25 +1278,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1380,7 +1329,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index d5edc5950a..3592978455 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index 9b2786c4cb..be9c6033db 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
index 3901584fa9..f95cf69fa6 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@@ -561,6 +561,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index 982092684f..f2ada46ae4 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
index 7f6e635e66..40dde29f39 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index 2627c5a143..c9b808e6bc 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
index dd142643bd..d1be6f598c 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
@@ -570,6 +570,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
index c2347371e4..ab87a5e5bf 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
index 24c2f8d0bc..1a5d4b10ff 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
@@ -561,6 +561,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
index f335cf870c..e8a56d519a 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
index 66cbc60389..5ebfe43944 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
@@ -555,6 +555,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
index 719f0cd582..feca063213 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
index 415bbf99ce..54300ff1bd 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
@@ -555,6 +555,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
index 3e8a9ada3e..48b166eac7 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
index 3566866652..b2796b94cc 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
@@ -561,6 +561,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
index f335cf870c..e8a56d519a 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h
index dd973926fb..a88c4f5b6c 100644
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@@ -532,6 +532,29 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 42d40669e0..a72348067f 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
index f49bda32b3..9bfaa9f871 100644
--- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h
+++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
@@ -532,6 +532,29 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 8dbe935f37..3aa686217f 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
index c2a7c201a0..493a492f21 100644
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@@ -566,6 +566,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 0aaa3c8c3f..5aea57a965 100644
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index b939cb1608..4cd0a02a34 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -566,6 +566,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 47364bbc6a..d6a7766691 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -566,6 +566,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 267146ea32..dbf2903554 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 40b64bfa32..18a7483cbc 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 8a34807c1f..632e418e54 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 40b64bfa32..18a7483cbc 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 14358c2ccb..49f8c2b2ca 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
index 92fe04d48f..6a6f4191b4 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
@@ -563,6 +563,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index 6f4346c035..26253ef14d 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 659cd120ee..78af647746 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 8b1f8818f4..5e55db4233 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h
index cd22cc4029..123d58c311 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h
@@ -550,6 +550,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index cafe64bfbe..4b8eadb5cd 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
index 8ee16bcf36..1eda0e38ab 100644
--- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index c1cb035af7..c6fe2c7b85 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 4378d1828b..272fc057fa 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -845,15 +845,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -863,8 +865,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 4
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -875,8 +879,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1044,23 +1050,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1106,62 +1101,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1316,25 +1278,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1380,7 +1329,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
index 57904dbfb9..b7932fa213 100644
--- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 769d05aa8b..2e87ca37a1 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 470770bc02..95cd966b24 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h
index 98902e44d6..1d90ffea96 100644
--- a/Marlin/src/config/examples/STM32F10/Configuration.h
+++ b/Marlin/src/config/examples/STM32F10/Configuration.h
@@ -553,6 +553,29 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h
index e34063c398..43b6b5562f 100644
--- a/Marlin/src/config/examples/STM32F4/Configuration.h
+++ b/Marlin/src/config/examples/STM32F4/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h
index f2cb4391f3..485f6c560a 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index b3175b35e5..60aeebe4aa 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index dfcd373c0e..0057e1e722 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,125 +1042,80 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-#define HAVE_TMC26X
+#if HAS_DRIVER(TMC26X)
 
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  #define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  #define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  #define Z_IS_TMC26X
-  #define Z2_IS_TMC26X
-  #define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+  #define X_MAX_CURRENT     1000 // in mA
+  #define X_SENSE_RESISTOR    91 // in mOhms
+  #define X_MICROSTEPS        16 // number of microsteps
 
-  #define X_MAX_CURRENT     1200 // in mA
-  #define X_SENSE_RESISTOR    50 // in mOhms
-  #define X_MICROSTEPS        32 // number of microsteps
+  #define X2_MAX_CURRENT    1000
+  #define X2_SENSE_RESISTOR   91
+  #define X2_MICROSTEPS       16
 
-  #define X2_MAX_CURRENT    1200
-  #define X2_SENSE_RESISTOR   50
-  #define X2_MICROSTEPS       32
+  #define Y_MAX_CURRENT     1000
+  #define Y_SENSE_RESISTOR    91
+  #define Y_MICROSTEPS        16
 
-  #define Y_MAX_CURRENT     1200
-  #define Y_SENSE_RESISTOR    50
-  #define Y_MICROSTEPS        32
+  #define Y2_MAX_CURRENT    1000
+  #define Y2_SENSE_RESISTOR   91
+  #define Y2_MICROSTEPS       16
 
-  #define Y2_MAX_CURRENT    1200
-  #define Y2_SENSE_RESISTOR   50
-  #define Y2_MICROSTEPS       32
+  #define Z_MAX_CURRENT     1000
+  #define Z_SENSE_RESISTOR    91
+  #define Z_MICROSTEPS        16
 
-  #define Z_MAX_CURRENT     1200
-  #define Z_SENSE_RESISTOR    50
-  #define Z_MICROSTEPS        32
+  #define Z2_MAX_CURRENT    1000
+  #define Z2_SENSE_RESISTOR   91
+  #define Z2_MICROSTEPS       16
 
-  #define Z2_MAX_CURRENT    1200
-  #define Z2_SENSE_RESISTOR   50
-  #define Z2_MICROSTEPS       32
+  #define E0_MAX_CURRENT    1000
+  #define E0_SENSE_RESISTOR   91
+  #define E0_MICROSTEPS       16
 
-  #define E0_MAX_CURRENT    1200
-  #define E0_SENSE_RESISTOR   50
-  #define E0_MICROSTEPS       32
+  #define E1_MAX_CURRENT    1000
+  #define E1_SENSE_RESISTOR   91
+  #define E1_MICROSTEPS       16
 
-  #define E1_MAX_CURRENT    1200
-  #define E1_SENSE_RESISTOR   50
-  #define E1_MICROSTEPS       32
+  #define E2_MAX_CURRENT    1000
+  #define E2_SENSE_RESISTOR   91
+  #define E2_MICROSTEPS       16
 
-  #define E2_MAX_CURRENT    1200
-  #define E2_SENSE_RESISTOR   50
-  #define E2_MICROSTEPS       32
+  #define E3_MAX_CURRENT    1000
+  #define E3_SENSE_RESISTOR   91
+  #define E3_MICROSTEPS       16
 
-  #define E3_MAX_CURRENT    1200
-  #define E3_SENSE_RESISTOR   50
-  #define E3_MICROSTEPS       32
+  #define E4_MAX_CURRENT    1000
+  #define E4_SENSE_RESISTOR   91
+  #define E4_MICROSTEPS       16
 
-  #define E4_MAX_CURRENT    1200
-  #define E4_SENSE_RESISTOR   50
-  #define E4_MICROSTEPS       32
-
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1309,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1373,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h
index 6b1af6ed5e..e2520b0d8f 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@@ -602,9 +602,32 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
-#define ENDSTOP_INTERRUPTS_FEATURE
+//#define ENDSTOP_INTERRUPTS_FEATURE
 
 /**
  * Endstop Noise Filter
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 9076b2ad4b..e0b9ad5573 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
index c88c5ab47f..ce0b0d8b0a 100644
--- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
index 32b1100e42..8b72335a0d 100644
--- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
index 94369ac838..0770e05158 100644
--- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
@@ -562,6 +562,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
index 28a913bad1..cff4bbadda 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  TMC2130
+#define Y_DRIVER_TYPE  TMC2130
+#define Z_DRIVER_TYPE  TMC2130
+//#define X2_DRIVER_TYPE A4988
+//#define Y2_DRIVER_TYPE A4988
+//#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE TMC2130
+//#define E1_DRIVER_TYPE A4988
+//#define E2_DRIVER_TYPE A4988
+//#define E3_DRIVER_TYPE A4988
+//#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 2d979888a7..cc818c1749 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
index 73e02af8d5..84de01ab02 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@@ -581,6 +581,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index f28511c10d..19da7a3e62 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -840,15 +840,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -858,8 +860,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -870,8 +874,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1039,23 +1045,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1101,62 +1096,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1311,25 +1273,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1375,7 +1324,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index a3f5885846..0d189a84db 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
index b8423af80c..78f3fb4f83 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -561,6 +561,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 5371c4438b..6414c4fc96 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -839,15 +839,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -857,8 +859,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -869,8 +873,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1038,23 +1044,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1100,62 +1095,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1310,25 +1272,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1374,7 +1323,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
index 336080a597..26e0b4ddb2 100644
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@@ -551,6 +551,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 9b5699c308..c33fe28ef1 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -839,15 +839,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -857,8 +859,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -869,8 +873,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1038,23 +1044,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1100,62 +1095,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1310,25 +1272,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1374,7 +1323,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 48ee2e7228..83ff604e75 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -839,15 +839,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -857,8 +859,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -869,8 +873,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1038,23 +1044,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1100,62 +1095,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1310,25 +1272,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1374,7 +1323,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 5b8606320c..3a6dc2ff44 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -627,6 +627,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 443db29a21..fe3b08ba6b 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -839,15 +839,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -857,8 +859,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -869,8 +873,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1038,23 +1044,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1100,62 +1095,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1310,25 +1272,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1374,7 +1323,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 443db29a21..fe3b08ba6b 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -839,15 +839,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -857,8 +859,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -869,8 +873,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1038,23 +1044,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1100,62 +1095,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1310,25 +1272,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1374,7 +1323,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
index b485cbab20..3df1ca6402 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@@ -617,6 +617,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 443db29a21..fe3b08ba6b 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -839,15 +839,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -857,8 +859,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -869,8 +873,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1038,23 +1044,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1100,62 +1095,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1310,25 +1272,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1374,7 +1323,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
index 58156536ab..cd4457bbfa 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@@ -603,6 +603,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index e5f73f1f93..8d771fe40c 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -844,15 +844,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -862,8 +864,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -874,8 +878,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1043,23 +1049,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1105,62 +1100,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1315,25 +1277,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1379,7 +1328,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
index acc2c677a6..f8fcb4a691 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@@ -621,6 +621,29 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 4e5b8af3a2..78987d2a6b 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -839,15 +839,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -857,8 +859,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -869,8 +873,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1038,23 +1044,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1100,62 +1095,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1310,25 +1272,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1374,7 +1323,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
index 85113a29d5..884f574e5b 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -564,9 +564,32 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
-#define ENDSTOP_INTERRUPTS_FEATURE
+//#define ENDSTOP_INTERRUPTS_FEATURE
 
 /**
  * Endstop Noise Filter
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 0ad494097e..7f68f960ce 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h
index f883caf04f..7e9117b6ef 100644
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@@ -554,6 +554,29 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index ffba692b3f..2c2fb3dab0 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
index 9786bb04fe..0739a5836d 100644
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -553,6 +553,29 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index da3fbb65b7..997bf647f5 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -837,15 +837,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -855,8 +857,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 30
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -867,8 +871,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 15000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1036,23 +1042,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1098,62 +1093,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1308,25 +1270,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1372,7 +1321,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h
index 4182048dbd..25a8753698 100644
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@@ -556,6 +556,29 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 3c60e96ae4..5b0ce763a3 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -838,15 +838,17 @@
 
 /**
  * Minimum delay after setting the stepper DIR (in ns)
- *    0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *   20 : Minimum for TMC2xxx drivers
- *  200 : Minimum for A4988 drivers
- *  500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *  650 : Minimum for DRV8825 drivers
- * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- *15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_DIR_DELAY 0
+//#define MINIMUM_STEPPER_DIR_DELAY 650
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -856,8 +858,10 @@
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE 2
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
@@ -868,8 +872,10 @@
  *  150000 : Maximum for TB6600 stepper driver
  *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
  */
-#define MAXIMUM_STEPPER_RATE 250000
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -1037,23 +1043,12 @@
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMC26X
-#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC26X
-  //#define X2_IS_TMC26X
-  //#define Y_IS_TMC26X
-  //#define Y2_IS_TMC26X
-  //#define Z_IS_TMC26X
-  //#define Z2_IS_TMC26X
-  //#define E0_IS_TMC26X
-  //#define E1_IS_TMC26X
-  //#define E2_IS_TMC26X
-  //#define E3_IS_TMC26X
-  //#define E4_IS_TMC26X
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1099,62 +1094,29 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif
+#endif // TMC26X
 
 // @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
- *
- * You'll also need the TMC2130Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2130Stepper).
- *
  * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  * You may also use software SPI if you wish to use general purpose IO pins.
- */
-//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-#endif
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ *
+ * The TMC2130Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2130Stepper
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
+ * The TMC2208Stepper library is required for this stepper driver.
+ * https://github.com/teemuatlut/TMC2208Stepper
  */
-//#define HAVE_TMC2208
-#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-#endif
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1309,25 +1271,12 @@
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1373,7 +1322,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif
+#endif // L6470
 
 /**
  * TWI/I2C BUS
diff --git a/Marlin/src/core/drivers.h b/Marlin/src/core/drivers.h
new file mode 100644
index 0000000000..06610880e4
--- /dev/null
+++ b/Marlin/src/core/drivers.h
@@ -0,0 +1,57 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define A4988               0x001
+#define DRV8825             0x002
+#define LV8729              0x003
+#define L6470               0x104
+#define TB6560              0x005
+#define TB6600              0x006
+#define TMC2100             0x007
+#define TMC2130             0x108
+#define TMC2130_STANDALONE  0x008
+#define TMC2208             0x109
+#define TMC2208_STANDALONE  0x009
+#define TMC26X              0x10A
+#define TMC26X_STANDALONE   0x00A
+#define TMC2660             0x10B
+#define TMC2660_STANDALONE  0x00B
+
+#define AXIS_DRIVER_TYPE(A, T) ( defined(A##_DRIVER_TYPE) && (A##_DRIVER_TYPE == T) )
+
+#define HAS_DRIVER(T)  (AXIS_DRIVER_TYPE( X,T) || AXIS_DRIVER_TYPE(X2,T) || \
+                        AXIS_DRIVER_TYPE( Y,T) || AXIS_DRIVER_TYPE(Y2,T) || \
+                        AXIS_DRIVER_TYPE( Z,T) || AXIS_DRIVER_TYPE(Z2,T) || \
+                        AXIS_DRIVER_TYPE(E0,T) || \
+                        AXIS_DRIVER_TYPE(E1,T) || \
+                        AXIS_DRIVER_TYPE(E2,T) || \
+                        AXIS_DRIVER_TYPE(E3,T) || \
+                        AXIS_DRIVER_TYPE(E4,T) )
+
+// Test for supported TMC drivers that require advanced configuration
+// Does not match standalone configurations
+#define HAS_TRINAMIC ( HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2660) )
+
+#define AXIS_IS_TMC(A) ( AXIS_DRIVER_TYPE(A, TMC2130) || \
+                         AXIS_DRIVER_TYPE(A, TMC2208) || \
+                         AXIS_DRIVER_TYPE(A, TMC2660) )
diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h
index 224170bfff..fc551b8e16 100644
--- a/Marlin/src/core/macros.h
+++ b/Marlin/src/core/macros.h
@@ -20,8 +20,8 @@
  *
  */
 
-#ifndef MACROS_H
-#define MACROS_H
+#ifndef _CORE_MACROS_H_
+#define _CORE_MACROS_H_
 
 #define NUM_AXIS 4
 #define ABCE 4
@@ -270,4 +270,4 @@
 #define FMOD(x, y)  fmodf(x, y)
 #define HYPOT(x,y)  SQRT(HYPOT2(x,y))
 
-#endif //__MACROS_H
+#endif // _CORE_MACROS_H_
diff --git a/Marlin/src/feature/tmc_util.cpp b/Marlin/src/feature/tmc_util.cpp
index a5dc428592..c7d6cacb10 100644
--- a/Marlin/src/feature/tmc_util.cpp
+++ b/Marlin/src/feature/tmc_util.cpp
@@ -52,7 +52,7 @@ bool report_tmc_status = false;
     bool is_ot;
     bool is_error;
   };
-  #if ENABLED(HAVE_TMC2130)
+  #if HAS_DRIVER(TMC2130)
     static uint32_t get_pwm_scale(TMC2130Stepper &st) { return st.PWM_SCALE(); }
     static uint8_t get_status_response(TMC2130Stepper &st) { return st.status_response & 0xF; }
     static TMC_driver_data get_driver_data(TMC2130Stepper &st) {
@@ -70,7 +70,7 @@ bool report_tmc_status = false;
       return data;
     }
   #endif
-  #if ENABLED(HAVE_TMC2208)
+  #if HAS_DRIVER(TMC2208)
     static uint32_t get_pwm_scale(TMC2208Stepper &st) { return st.pwm_scale_sum(); }
     static uint8_t get_status_response(TMC2208Stepper &st) {
       uint32_t drv_status = st.DRV_STATUS();
@@ -159,21 +159,21 @@ bool report_tmc_status = false;
     }
   }
 
-  #define HAS_HW_COMMS(ST) ENABLED(ST##_IS_TMC2130)|| (ENABLED(ST##_IS_TMC2208) && defined(ST##_HARDWARE_SERIAL))
+  #define HAS_HW_COMMS(ST) AXIS_DRIVER_TYPE(ST, TMC2130) || (AXIS_DRIVER_TYPE(ST, TMC2208) && defined(ST##_HARDWARE_SERIAL))
 
   void monitor_tmc_driver() {
     static millis_t next_cOT = 0;
     if (ELAPSED(millis(), next_cOT)) {
       next_cOT = millis() + 500;
-      #if HAS_HW_COMMS(X) || ENABLED(IS_TRAMS)
+      #if HAS_HW_COMMS(X)
         static uint8_t x_otpw_cnt = 0;
         monitor_tmc_driver(stepperX, TMC_X, x_otpw_cnt);
       #endif
-      #if HAS_HW_COMMS(Y) || ENABLED(IS_TRAMS)
+      #if HAS_HW_COMMS(Y)
         static uint8_t y_otpw_cnt = 0;
         monitor_tmc_driver(stepperY, TMC_Y, y_otpw_cnt);
       #endif
-      #if HAS_HW_COMMS(Z) || ENABLED(IS_TRAMS)
+      #if HAS_HW_COMMS(Z)
         static uint8_t z_otpw_cnt = 0;
         monitor_tmc_driver(stepperZ, TMC_Z, z_otpw_cnt);
       #endif
@@ -189,7 +189,7 @@ bool report_tmc_status = false;
         static uint8_t z2_otpw_cnt = 0;
         monitor_tmc_driver(stepperZ2, TMC_Z, z2_otpw_cnt);
       #endif
-      #if HAS_HW_COMMS(E0) || ENABLED(IS_TRAMS)
+      #if HAS_HW_COMMS(E0)
         static uint8_t e0_otpw_cnt = 0;
         monitor_tmc_driver(stepperE0, TMC_E0, e0_otpw_cnt);
       #endif
@@ -311,7 +311,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
     SERIAL_EOL();
   }
 
-  #if ENABLED(HAVE_TMC2130)
+  #if HAS_DRIVER(TMC2130)
     static void tmc_status(TMC2130Stepper &st, const TMC_debug_enum i) {
       switch (i) {
         case TMC_PWM_SCALE: SERIAL_PRINT(st.PWM_SCALE(), DEC); break;
@@ -331,7 +331,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
     }
   #endif
 
-  #if ENABLED(HAVE_TMC2208)
+  #if HAS_DRIVER(TMC2208)
     static void tmc_status(TMC2208Stepper &st, const TMC_debug_enum i) {
       switch (i) {
         case TMC_TSTEP: { uint32_t data = 0; st.TSTEP(&data); SERIAL_PROTOCOL(data); break; }
@@ -420,52 +420,52 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
   }
 
   static void tmc_debug_loop(const TMC_debug_enum i) {
-    #if X_IS_TRINAMIC
+    #if AXIS_IS_TMC(X)
       tmc_status(stepperX, TMC_X, i, planner.axis_steps_per_mm[X_AXIS]);
     #endif
-    #if X2_IS_TRINAMIC
+    #if AXIS_IS_TMC(X2)
       tmc_status(stepperX2, TMC_X2, i, planner.axis_steps_per_mm[X_AXIS]);
     #endif
 
-    #if Y_IS_TRINAMIC
+    #if AXIS_IS_TMC(Y)
       tmc_status(stepperY, TMC_Y, i, planner.axis_steps_per_mm[Y_AXIS]);
     #endif
-    #if Y2_IS_TRINAMIC
+    #if AXIS_IS_TMC(Y2)
       tmc_status(stepperY2, TMC_Y2, i, planner.axis_steps_per_mm[Y_AXIS]);
     #endif
 
-    #if Z_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z)
       tmc_status(stepperZ, TMC_Z, i, planner.axis_steps_per_mm[Z_AXIS]);
     #endif
-    #if Z2_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z2)
       tmc_status(stepperZ2, TMC_Z2, i, planner.axis_steps_per_mm[Z_AXIS]);
     #endif
 
-    #if E0_IS_TRINAMIC
+    #if AXIS_IS_TMC(E0)
       tmc_status(stepperE0, TMC_E0, i, planner.axis_steps_per_mm[E_AXIS]);
     #endif
-    #if E1_IS_TRINAMIC
+    #if AXIS_IS_TMC(E1)
       tmc_status(stepperE1, TMC_E1, i, planner.axis_steps_per_mm[E_AXIS
         #if ENABLED(DISTINCT_E_FACTORS)
           + 1
         #endif
       ]);
     #endif
-    #if E2_IS_TRINAMIC
+    #if AXIS_IS_TMC(E2)
       tmc_status(stepperE2, TMC_E2, i, planner.axis_steps_per_mm[E_AXIS
         #if ENABLED(DISTINCT_E_FACTORS)
           + 2
         #endif
       ]);
     #endif
-    #if E3_IS_TRINAMIC
+    #if AXIS_IS_TMC(E3)
       tmc_status(stepperE3, TMC_E3, i, planner.axis_steps_per_mm[E_AXIS
         #if ENABLED(DISTINCT_E_FACTORS)
           + 3
         #endif
       ]);
     #endif
-    #if E4_IS_TRINAMIC
+    #if AXIS_IS_TMC(E4)
       tmc_status(stepperE4, TMC_E4, i, planner.axis_steps_per_mm[E_AXIS
         #if ENABLED(DISTINCT_E_FACTORS)
           + 4
@@ -477,40 +477,40 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
   }
 
   static void drv_status_loop(const TMC_drv_status_enum i) {
-    #if X_IS_TRINAMIC
+    #if AXIS_IS_TMC(X)
       tmc_parse_drv_status(stepperX, TMC_X, i);
     #endif
-    #if X2_IS_TRINAMIC
+    #if AXIS_IS_TMC(X2)
       tmc_parse_drv_status(stepperX2, TMC_X2, i);
     #endif
 
-    #if Y_IS_TRINAMIC
+    #if AXIS_IS_TMC(Y)
       tmc_parse_drv_status(stepperY, TMC_Y, i);
     #endif
-    #if Y2_IS_TRINAMIC
+    #if AXIS_IS_TMC(Y2)
       tmc_parse_drv_status(stepperY2, TMC_Y2, i);
     #endif
 
-    #if Z_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z)
       tmc_parse_drv_status(stepperZ, TMC_Z, i);
     #endif
-    #if Z2_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z2)
       tmc_parse_drv_status(stepperZ2, TMC_Z2, i);
     #endif
 
-    #if E0_IS_TRINAMIC
+    #if AXIS_IS_TMC(E0)
       tmc_parse_drv_status(stepperE0, TMC_E0, i);
     #endif
-    #if E1_IS_TRINAMIC
+    #if AXIS_IS_TMC(E1)
       tmc_parse_drv_status(stepperE1, TMC_E1, i);
     #endif
-    #if E2_IS_TRINAMIC
+    #if AXIS_IS_TMC(E2)
       tmc_parse_drv_status(stepperE2, TMC_E2, i);
     #endif
-    #if E3_IS_TRINAMIC
+    #if AXIS_IS_TMC(E3)
       tmc_parse_drv_status(stepperE3, TMC_E3, i);
     #endif
-    #if E4_IS_TRINAMIC
+    #if AXIS_IS_TMC(E4)
       tmc_parse_drv_status(stepperE4, TMC_E4, i);
     #endif
 
@@ -553,7 +553,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
     TMC_REPORT("Stallguard thrs",    TMC_SGT);
 
     DRV_REPORT("DRVSTATUS",          TMC_DRV_CODES);
-    #if ENABLED(HAVE_TMC2130)
+    #if HAS_DRIVER(TMC2130)
       DRV_REPORT("stallguard\t",     TMC_STALLGUARD);
       DRV_REPORT("sg_result\t",      TMC_SG_RESULT);
       DRV_REPORT("fsactive\t",       TMC_FSACTIVE);
@@ -565,7 +565,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
     DRV_REPORT("s2ga\t",             TMC_S2GA);
     DRV_REPORT("otpw\t",             TMC_DRV_OTPW);
     DRV_REPORT("ot\t",               TMC_OT);
-    #if ENABLED(HAVE_TMC2208)
+    #if HAS_DRIVER(TMC2208)
       DRV_REPORT("157C\t",           TMC_T157);
       DRV_REPORT("150C\t",           TMC_T150);
       DRV_REPORT("143C\t",           TMC_T143);
@@ -591,43 +591,43 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
 
 #endif // SENSORLESS_HOMING
 
-#if ENABLED(HAVE_TMC2130)
+#if HAS_DRIVER(TMC2130)
   #define SET_CS_PIN(st) OUT_WRITE(st##_CS_PIN, HIGH)
   void tmc_init_cs_pins() {
-    #if ENABLED(X_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(X, TMC2130)
       SET_CS_PIN(X);
     #endif
-    #if ENABLED(Y_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Y, TMC2130)
       SET_CS_PIN(Y);
     #endif
-    #if ENABLED(Z_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Z, TMC2130)
       SET_CS_PIN(Z);
     #endif
-    #if ENABLED(X2_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(X2, TMC2130)
       SET_CS_PIN(X2);
     #endif
-    #if ENABLED(Y2_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Y2, TMC2130)
       SET_CS_PIN(Y2);
     #endif
-    #if ENABLED(Z2_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Z2, TMC2130)
       SET_CS_PIN(Z2);
     #endif
-    #if ENABLED(E0_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E0, TMC2130)
       SET_CS_PIN(E0);
     #endif
-    #if ENABLED(E1_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E1, TMC2130)
       SET_CS_PIN(E1);
     #endif
-    #if ENABLED(E2_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E2, TMC2130)
       SET_CS_PIN(E2);
     #endif
-    #if ENABLED(E3_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E3, TMC2130)
       SET_CS_PIN(E3);
     #endif
-    #if ENABLED(E4_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E4, TMC2130)
       SET_CS_PIN(E4);
     #endif
   }
-#endif // HAVE_TMC2130
+#endif // TMC2130
 
 #endif // HAS_TRINAMIC
diff --git a/Marlin/src/feature/tmc_util.h b/Marlin/src/feature/tmc_util.h
index 094b65e9b7..6f11955ac5 100644
--- a/Marlin/src/feature/tmc_util.h
+++ b/Marlin/src/feature/tmc_util.h
@@ -25,11 +25,11 @@
 
 #include "../inc/MarlinConfigPre.h"
 
-#if ENABLED(HAVE_TMC2130)
+#if HAS_DRIVER(TMC2130)
   #include <TMC2130Stepper.h>
 #endif
 
-#if ENABLED(HAVE_TMC2208)
+#if HAS_DRIVER(TMC2208)
   #include <TMC2208Stepper.h>
 #endif
 
@@ -100,7 +100,7 @@ void monitor_tmc_driver();
   void tmc_sensorless_homing(TMC2130Stepper &st, const bool enable=true);
 #endif
 
-#if ENABLED(HAVE_TMC2130)
+#if HAS_DRIVER(TMC2130)
   void tmc_init_cs_pins();
 #endif
 
diff --git a/Marlin/src/gcode/feature/trinamic/M906.cpp b/Marlin/src/gcode/feature/trinamic/M906.cpp
index 36545a2c2b..22d9a3f90a 100644
--- a/Marlin/src/gcode/feature/trinamic/M906.cpp
+++ b/Marlin/src/gcode/feature/trinamic/M906.cpp
@@ -42,45 +42,45 @@ void GcodeSuite::M906() {
     report = false;
     switch (i) {
       case X_AXIS:
-        #if X_IS_TRINAMIC
+        #if AXIS_IS_TMC(X)
           if (index == 0) TMC_SET_CURRENT(X);
         #endif
-        #if X2_IS_TRINAMIC
+        #if AXIS_IS_TMC(X2)
           if (index == 1) TMC_SET_CURRENT(X2);
         #endif
         break;
       case Y_AXIS:
-        #if Y_IS_TRINAMIC
+        #if AXIS_IS_TMC(Y)
           if (index == 0) TMC_SET_CURRENT(Y);
         #endif
-        #if Y2_IS_TRINAMIC
+        #if AXIS_IS_TMC(Y2)
           if (index == 1) TMC_SET_CURRENT(Y2);
         #endif
         break;
       case Z_AXIS:
-        #if Z_IS_TRINAMIC
+        #if AXIS_IS_TMC(Z)
           if (index == 0) TMC_SET_CURRENT(Z);
         #endif
-        #if Z2_IS_TRINAMIC
+        #if AXIS_IS_TMC(Z2)
           if (index == 1) TMC_SET_CURRENT(Z2);
         #endif
         break;
       case E_AXIS: {
         if (get_target_extruder_from_command()) return;
         switch (target_extruder) {
-          #if E0_IS_TRINAMIC
+          #if AXIS_IS_TMC(E0)
             case 0: TMC_SET_CURRENT(E0); break;
           #endif
-          #if E1_IS_TRINAMIC
+          #if AXIS_IS_TMC(E1)
             case 1: TMC_SET_CURRENT(E1); break;
           #endif
-          #if E2_IS_TRINAMIC
+          #if AXIS_IS_TMC(E2)
             case 2: TMC_SET_CURRENT(E2); break;
           #endif
-          #if E3_IS_TRINAMIC
+          #if AXIS_IS_TMC(E3)
             case 3: TMC_SET_CURRENT(E3); break;
           #endif
-          #if E4_IS_TRINAMIC
+          #if AXIS_IS_TMC(E4)
             case 4: TMC_SET_CURRENT(E4); break;
           #endif
         }
@@ -89,37 +89,37 @@ void GcodeSuite::M906() {
   }
 
   if (report) {
-    #if X_IS_TRINAMIC
+    #if AXIS_IS_TMC(X)
       TMC_SAY_CURRENT(X);
     #endif
-    #if X2_IS_TRINAMIC
+    #if AXIS_IS_TMC(X2)
       TMC_SAY_CURRENT(X2);
     #endif
-    #if Y_IS_TRINAMIC
+    #if AXIS_IS_TMC(Y)
       TMC_SAY_CURRENT(Y);
     #endif
-    #if Y2_IS_TRINAMIC
+    #if AXIS_IS_TMC(Y2)
       TMC_SAY_CURRENT(Y2);
     #endif
-    #if Z_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z)
       TMC_SAY_CURRENT(Z);
     #endif
-    #if Z2_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z2)
       TMC_SAY_CURRENT(Z2);
     #endif
-    #if E0_IS_TRINAMIC
+    #if AXIS_IS_TMC(E0)
       TMC_SAY_CURRENT(E0);
     #endif
-    #if E1_IS_TRINAMIC
+    #if AXIS_IS_TMC(E1)
       TMC_SAY_CURRENT(E1);
     #endif
-    #if E2_IS_TRINAMIC
+    #if AXIS_IS_TMC(E2)
       TMC_SAY_CURRENT(E2);
     #endif
-    #if E3_IS_TRINAMIC
+    #if AXIS_IS_TMC(E3)
       TMC_SAY_CURRENT(E3);
     #endif
-    #if E4_IS_TRINAMIC
+    #if AXIS_IS_TMC(E4)
       TMC_SAY_CURRENT(E4);
     #endif
   }
diff --git a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp b/Marlin/src/gcode/feature/trinamic/M911-M915.cpp
index d7b971c97c..6ba9ee5e99 100644
--- a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp
+++ b/Marlin/src/gcode/feature/trinamic/M911-M915.cpp
@@ -30,37 +30,33 @@
 #include "../../../module/planner.h"
 #include "../../queue.h"
 
-#define M91x_USE(A) (ENABLED(A##_IS_TMC2130) || (ENABLED(A##_IS_TMC2208) && PIN_EXISTS(A##_SERIAL_RX)))
+#define M91x_USE(ST) (AXIS_DRIVER_TYPE(ST, TMC2130) || (AXIS_DRIVER_TYPE(ST, TMC2208) && PIN_EXISTS(ST##_SERIAL_RX)))
 #define M91x_USE_E(N) (E_STEPPERS > N && M91x_USE(E##N))
-#define M91x_USE_X  (ENABLED(IS_TRAMS) || M91x_USE(X))
-#define M91x_USE_Y  (ENABLED(IS_TRAMS) || M91x_USE(Y))
-#define M91x_USE_Z  (ENABLED(IS_TRAMS) || M91x_USE(Z))
-#define M91x_USE_E0 (ENABLED(IS_TRAMS) || M91x_USE_E(0))
 
 /**
  * M911: Report TMC stepper driver overtemperature pre-warn flag
  *       This flag is held by the library, persisting until cleared by M912
  */
 void GcodeSuite::M911() {
-  #if M91x_USE_X
+  #if M91x_USE(X)
     tmc_report_otpw(stepperX, TMC_X);
   #endif
   #if M91x_USE(X2)
     tmc_report_otpw(stepperX2, TMC_X2);
   #endif
-  #if M91x_USE_Y
+  #if M91x_USE(Y)
     tmc_report_otpw(stepperY, TMC_Y);
   #endif
   #if M91x_USE(Y2)
     tmc_report_otpw(stepperY2, TMC_Y2);
   #endif
-  #if M91x_USE_Z
+  #if M91x_USE(Z)
     tmc_report_otpw(stepperZ, TMC_Z);
   #endif
   #if M91x_USE(Z2)
     tmc_report_otpw(stepperZ2, TMC_Z2);
   #endif
-  #if M91x_USE_E0
+  #if M91x_USE_E(0)
     tmc_report_otpw(stepperE0, TMC_E0);
   #endif
   #if M91x_USE_E(1)
@@ -96,9 +92,9 @@ void GcodeSuite::M912() {
                hasE = parser.seen(axis_codes[E_AXIS]),
                hasNone = !hasX && !hasY && !hasZ && !hasE;
 
-    #if M91x_USE_X || M91x_USE(X2)
+    #if M91x_USE(X) || M91x_USE(X2)
       const uint8_t xval = parser.byteval(axis_codes[X_AXIS], 10);
-      #if M91x_USE_X
+      #if M91x_USE(X)
         if (hasNone || xval == 1 || (hasX && xval == 10)) tmc_clear_otpw(stepperX, TMC_X);
       #endif
       #if M91x_USE(X2)
@@ -106,9 +102,9 @@ void GcodeSuite::M912() {
       #endif
     #endif
 
-    #if M91x_USE_Y || M91x_USE(Y2)
+    #if M91x_USE(Y) || M91x_USE(Y2)
       const uint8_t yval = parser.byteval(axis_codes[Y_AXIS], 10);
-      #if M91x_USE_Y
+      #if M91x_USE(Y)
         if (hasNone || yval == 1 || (hasY && yval == 10)) tmc_clear_otpw(stepperY, TMC_Y);
       #endif
       #if M91x_USE(Y2)
@@ -116,9 +112,9 @@ void GcodeSuite::M912() {
       #endif
     #endif
 
-    #if M91x_USE_Z || M91x_USE(Z2)
+    #if M91x_USE(Z) || M91x_USE(Z2)
       const uint8_t zval = parser.byteval(axis_codes[Z_AXIS], 10);
-      #if M91x_USE_Z
+      #if M91x_USE(Z)
         if (hasNone || zval == 1 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ, TMC_Z);
       #endif
       #if M91x_USE(Z2)
@@ -126,9 +122,9 @@ void GcodeSuite::M912() {
       #endif
     #endif
 
-    #if M91x_USE_E0 || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4)
+    #if M91x_USE_E(0) || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4)
       const uint8_t eval = parser.byteval(axis_codes[E_AXIS], 10);
-      #if M91x_USE_E0
+      #if M91x_USE_E(0)
         if (hasNone || eval == 0 || (hasE && eval == 10)) tmc_clear_otpw(stepperE0, TMC_E0);
       #endif
       #if M91x_USE_E(1)
@@ -162,45 +158,45 @@ void GcodeSuite::M912() {
       report = false;
       switch (i) {
         case X_AXIS:
-          #if X_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(X)
             if (index < 2) TMC_SET_PWMTHRS(X,X);
           #endif
-          #if X2_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(X2)
             if (!(index & 1)) TMC_SET_PWMTHRS(X,X2);
           #endif
           break;
         case Y_AXIS:
-          #if Y_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(Y)
             if (index < 2) TMC_SET_PWMTHRS(Y,Y);
           #endif
-          #if Y2_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(Y2)
             if (!(index & 1)) TMC_SET_PWMTHRS(Y,Y2);
           #endif
           break;
         case Z_AXIS:
-          #if Z_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(Z)
             if (index < 2) TMC_SET_PWMTHRS(Z,Z);
           #endif
-          #if Z2_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(Z2)
             if (!(index & 1)) TMC_SET_PWMTHRS(Z,Z2);
           #endif
           break;
         case E_AXIS: {
           if (get_target_extruder_from_command()) return;
           switch (target_extruder) {
-            #if E0_IS_TRINAMIC
+            #if AXIS_HAS_STEALTHCHOP(E0)
               case 0: TMC_SET_PWMTHRS_E(0); break;
             #endif
-            #if E_STEPPERS > 1 && E1_IS_TRINAMIC
+            #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1)
               case 1: TMC_SET_PWMTHRS_E(1); break;
             #endif
-            #if E_STEPPERS > 2 && E2_IS_TRINAMIC
+            #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2)
               case 2: TMC_SET_PWMTHRS_E(2); break;
             #endif
-            #if E_STEPPERS > 3 && E3_IS_TRINAMIC
+            #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3)
               case 3: TMC_SET_PWMTHRS_E(3); break;
             #endif
-            #if E_STEPPERS > 4 && E4_IS_TRINAMIC
+            #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4)
               case 4: TMC_SET_PWMTHRS_E(4); break;
             #endif
           }
@@ -209,37 +205,37 @@ void GcodeSuite::M912() {
     }
 
     if (report) {
-      #if X_IS_TRINAMIC
+      #if AXIS_HAS_STEALTHCHOP(X)
         TMC_SAY_PWMTHRS(X,X);
       #endif
-      #if X2_IS_TRINAMIC
+      #if AXIS_HAS_STEALTHCHOP(X2)
         TMC_SAY_PWMTHRS(X,X2);
       #endif
-      #if Y_IS_TRINAMIC
+      #if AXIS_HAS_STEALTHCHOP(Y)
         TMC_SAY_PWMTHRS(Y,Y);
       #endif
-      #if Y2_IS_TRINAMIC
+      #if AXIS_HAS_STEALTHCHOP(Y2)
         TMC_SAY_PWMTHRS(Y,Y2);
       #endif
-      #if Z_IS_TRINAMIC
+      #if AXIS_HAS_STEALTHCHOP(Z)
         TMC_SAY_PWMTHRS(Z,Z);
       #endif
-      #if Z2_IS_TRINAMIC
+      #if AXIS_HAS_STEALTHCHOP(Z2)
         TMC_SAY_PWMTHRS(Z,Z2);
       #endif
-      #if E0_IS_TRINAMIC
+      #if AXIS_HAS_STEALTHCHOP(E0)
         TMC_SAY_PWMTHRS_E(0);
       #endif
-      #if E_STEPPERS > 1 && E1_IS_TRINAMIC
+      #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1)
         TMC_SAY_PWMTHRS_E(1);
       #endif
-      #if E_STEPPERS > 2 && E2_IS_TRINAMIC
+      #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2)
         TMC_SAY_PWMTHRS_E(2);
       #endif
-      #if E_STEPPERS > 3 && E3_IS_TRINAMIC
+      #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3)
         TMC_SAY_PWMTHRS_E(3);
       #endif
-      #if E_STEPPERS > 4 && E4_IS_TRINAMIC
+      #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4)
         TMC_SAY_PWMTHRS_E(4);
       #endif
     }
@@ -262,30 +258,30 @@ void GcodeSuite::M912() {
       switch (i) {
         #if X_SENSORLESS
           case X_AXIS:
-            #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)
+            #if AXIS_HAS_STALLGUARD(X)
               if (index < 2) TMC_SET_SGT(X);
             #endif
-            #if ENABLED(X2_IS_TMC2130)
+            #if AXIS_HAS_STALLGUARD(X2)
               if (!(index & 1)) TMC_SET_SGT(X2);
             #endif
             break;
         #endif
         #if Y_SENSORLESS
           case Y_AXIS:
-            #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)
+            #if AXIS_HAS_STALLGUARD(Y)
               if (index < 2) TMC_SET_SGT(Y);
             #endif
-            #if ENABLED(Y2_IS_TMC2130)
+            #if AXIS_HAS_STALLGUARD(Y2)
               if (!(index & 1)) TMC_SET_SGT(Y2);
             #endif
             break;
         #endif
         #if Z_SENSORLESS
           case Z_AXIS:
-            #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)
+            #if AXIS_HAS_STALLGUARD(Z)
               if (index < 2) TMC_SET_SGT(Z);
             #endif
-            #if ENABLED(Z2_IS_TMC2130)
+            #if AXIS_HAS_STALLGUARD(Z2)
               if (!(index & 1)) TMC_SET_SGT(Z2);
             #endif
             break;
@@ -295,26 +291,26 @@ void GcodeSuite::M912() {
 
     if (report) {
       #if X_SENSORLESS
-        #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)
+        #if AXIS_HAS_STALLGUARD(X)
           TMC_SAY_SGT(X);
         #endif
-        #if ENABLED(X2_IS_TMC2130)
+        #if AXIS_HAS_STALLGUARD(X2)
           TMC_SAY_SGT(X2);
         #endif
       #endif
       #if Y_SENSORLESS
-        #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)
+        #if AXIS_HAS_STALLGUARD(Y)
           TMC_SAY_SGT(Y);
         #endif
-        #if ENABLED(Y2_IS_TMC2130)
+        #if AXIS_HAS_STALLGUARD(Y2)
           TMC_SAY_SGT(Y2);
         #endif
       #endif
       #if Z_SENSORLESS
-        #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)
+        #if AXIS_HAS_STALLGUARD(Z)
           TMC_SAY_SGT(Z);
         #endif
-        #if ENABLED(Z2_IS_TMC2130)
+        #if AXIS_HAS_STALLGUARD(Z2)
           TMC_SAY_SGT(Z2);
         #endif
       #endif
@@ -335,11 +331,11 @@ void GcodeSuite::M912() {
       return;
     }
 
-    #if Z_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z)
       const uint16_t Z_current_1 = stepperZ.getCurrent();
       stepperZ.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER);
     #endif
-    #if Z2_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z2)
       const uint16_t Z2_current_1 = stepperZ2.getCurrent();
       stepperZ2.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER);
     #endif
@@ -350,10 +346,10 @@ void GcodeSuite::M912() {
 
     do_blocking_move_to_z(Z_MAX_POS+_z);
 
-    #if Z_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z)
       stepperZ.setCurrent(Z_current_1, R_SENSE, HOLD_MULTIPLIER);
     #endif
-    #if Z2_IS_TRINAMIC
+    #if AXIS_IS_TMC(Z2)
       stepperZ2.setCurrent(Z2_current_1, R_SENSE, HOLD_MULTIPLIER);
     #endif
 
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index 6f847337f4..2130b1636e 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -132,7 +132,7 @@
  * M119 - Report endstops status.
  * M120 - Enable endstops detection.
  * M121 - Disable endstops detection.
- * M122 - Debug stepper (Requires HAVE_TMC2130 or HAVE_TMC2208)
+ * M122 - Debug stepper (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660)
  * M125 - Save current position and move to filament change position. (Requires PARK_HEAD_ON_PAUSE)
  * M126 - Solenoid Air Valve Open. (Requires BARICUDA)
  * M127 - Solenoid Air Valve Closed. (Requires BARICUDA)
@@ -219,13 +219,13 @@
  * M868 - Report or set position encoder module error correction threshold.
  * M869 - Report position encoder module error.
  * M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE)
- * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires HAVE_TMC2130 or HAVE_TMC2208)
+ * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660)
  * M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots)
  * M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN)
  * M909 - Print digipot/DAC current value. (Requires DAC_STEPPER_CURRENT)
  * M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires DAC_STEPPER_CURRENT)
- * M911 - Report stepper driver overtemperature pre-warn condition. (Requires HAVE_TMC2130 or HAVE_TMC2208)
- * M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires HAVE_TMC2130 or HAVE_TMC2208)
+ * M911 - Report stepper driver overtemperature pre-warn condition. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660)
+ * M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660)
  * M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD)
  * M914 - Set SENSORLESS_HOMING sensitivity. (Requires SENSORLESS_HOMING)
  *
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 24d4015f6c..03214b3c1d 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -426,6 +426,63 @@
 #define ARRAY_BY_HOTENDS(...) ARRAY_N(HOTENDS, __VA_ARGS__)
 #define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1)
 
+/**
+ * Driver Timings
+ * NOTE: Driver timing order is longest-to-shortest duration.
+ *       Preserve this ordering when adding new drivers.
+ */
+#ifndef MINIMUM_STEPPER_DIR_DELAY
+  #if HAS_DRIVER(TB6560)
+    #define MINIMUM_STEPPER_DIR_DELAY 15000
+  #elif HAS_DRIVER(TB6600)
+    #define MINIMUM_STEPPER_DIR_DELAY 1500
+  #elif HAS_DRIVER(DRV8825)
+    #define MINIMUM_STEPPER_DIR_DELAY 650
+  #elif HAS_DRIVER(LV8729)
+    #define MINIMUM_STEPPER_DIR_DELAY 500
+  #elif HAS_DRIVER(A4988)
+    #define MINIMUM_STEPPER_DIR_DELAY 200
+  #elif HAS_TRINAMIC || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE)
+    #define MINIMUM_STEPPER_DIR_DELAY 20
+  #else
+    #define MINIMUM_STEPPER_DIR_DELAY 0   // Expect at least 10µS since one Stepper ISR must transpire
+  #endif
+#endif
+
+#ifndef MINIMUM_STEPPER_PULSE
+  #if HAS_DRIVER(TB6560)
+    #define MINIMUM_STEPPER_PULSE 30
+  #elif HAS_DRIVER(TB6600)
+    #define MINIMUM_STEPPER_PULSE 3
+  #elif HAS_DRIVER(DRV8825)
+    #define MINIMUM_STEPPER_PULSE 2
+  #elif HAS_DRIVER(A4988) || HAS_DRIVER(LV8729)
+    #define MINIMUM_STEPPER_PULSE 1
+  #elif HAS_TRINAMIC || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE)
+    #define MINIMUM_STEPPER_PULSE 0
+  #else
+    #define MINIMUM_STEPPER_PULSE 2
+  #endif
+#endif
+
+#ifndef MAXIMUM_STEPPER_RATE
+  #if HAS_DRIVER(TB6560)
+    #define MAXIMUM_STEPPER_RATE 15000
+  #elif HAS_DRIVER(LV8729)
+    #define MAXIMUM_STEPPER_RATE 130000
+  #elif HAS_DRIVER(TB6600)
+    #define MAXIMUM_STEPPER_RATE 150000
+  #elif HAS_DRIVER(DRV8825)
+    #define MAXIMUM_STEPPER_RATE 250000
+  #elif HAS_TRINAMIC || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE)
+    #define MAXIMUM_STEPPER_RATE 400000
+  #elif HAS_DRIVER(A4988)
+    #define MAXIMUM_STEPPER_RATE 500000
+  #else
+    #define MAXIMUM_STEPPER_RATE 250000
+  #endif
+#endif
+
 /**
  * X_DUAL_ENDSTOPS endstop reassignment
  */
@@ -711,27 +768,19 @@
 #define HAS_SOLENOID_4    (PIN_EXISTS(SOL4))
 
 // Trinamic Stepper Drivers
-#define HAS_TRINAMIC (ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) || ENABLED(IS_TRAMS))
-#define  X_IS_TRINAMIC (ENABLED( X_IS_TMC2130) || ENABLED( X_IS_TMC2208) || ENABLED(IS_TRAMS))
-#define X2_IS_TRINAMIC (ENABLED(X2_IS_TMC2130) || ENABLED(X2_IS_TMC2208))
-#define  Y_IS_TRINAMIC (ENABLED( Y_IS_TMC2130) || ENABLED( Y_IS_TMC2208) || ENABLED(IS_TRAMS))
-#define Y2_IS_TRINAMIC (ENABLED(Y2_IS_TMC2130) || ENABLED(Y2_IS_TMC2208))
-#define  Z_IS_TRINAMIC (ENABLED( Z_IS_TMC2130) || ENABLED( Z_IS_TMC2208) || ENABLED(IS_TRAMS))
-#define Z2_IS_TRINAMIC (ENABLED(Z2_IS_TMC2130) || ENABLED(Z2_IS_TMC2208))
-#define E0_IS_TRINAMIC (ENABLED(E0_IS_TMC2130) || ENABLED(E0_IS_TMC2208) || ENABLED(IS_TRAMS))
-#define E1_IS_TRINAMIC (ENABLED(E1_IS_TMC2130) || ENABLED(E1_IS_TMC2208))
-#define E2_IS_TRINAMIC (ENABLED(E2_IS_TMC2130) || ENABLED(E2_IS_TMC2208))
-#define E3_IS_TRINAMIC (ENABLED(E3_IS_TMC2130) || ENABLED(E3_IS_TMC2208))
-#define E4_IS_TRINAMIC (ENABLED(E4_IS_TMC2130) || ENABLED(E4_IS_TMC2208))
+#define HAS_STEALTHCHOP (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208))
+#define HAS_STALLGUARD  (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2660))
+#define AXIS_HAS_STEALTHCHOP(ST) ( AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2208) )
+#define AXIS_HAS_STALLGUARD(ST) ( AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2660) )
 
 #if ENABLED(SENSORLESS_HOMING)
   // Disable Z axis sensorless homing if a probe is used to home the Z axis
   #if HOMING_Z_WITH_PROBE
     #undef Z_HOMING_SENSITIVITY
   #endif
-  #define X_SENSORLESS (ENABLED(X_IS_TMC2130) && defined(X_HOMING_SENSITIVITY))
-  #define Y_SENSORLESS (ENABLED(Y_IS_TMC2130) && defined(Y_HOMING_SENSITIVITY))
-  #define Z_SENSORLESS (ENABLED(Z_IS_TMC2130) && defined(Z_HOMING_SENSITIVITY))
+  #define X_SENSORLESS (AXIS_HAS_STALLGUARD(X) && defined(X_HOMING_SENSITIVITY))
+  #define Y_SENSORLESS (AXIS_HAS_STALLGUARD(Y) && defined(Y_HOMING_SENSITIVITY))
+  #define Z_SENSORLESS (AXIS_HAS_STALLGUARD(Z) && defined(Z_HOMING_SENSITIVITY))
 #endif
 
 // Endstops and bed probe
diff --git a/Marlin/src/inc/MarlinConfigPre.h b/Marlin/src/inc/MarlinConfigPre.h
index 9ed1ee8ffa..c29de37c96 100644
--- a/Marlin/src/inc/MarlinConfigPre.h
+++ b/Marlin/src/inc/MarlinConfigPre.h
@@ -29,6 +29,7 @@
 #include "../core/types.h"
 #include "Version.h"
 #include "../../Configuration.h"
+#include "../core/drivers.h"
 #include "Conditionals_LCD.h"
 #include "../../Configuration_adv.h"
 #include "Conditionals_adv.h"
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index f40dc239ff..c6cf4bb4eb 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -265,10 +265,28 @@
 #elif defined(MEASURED_LOWER_LIMIT) || defined(MEASURED_UPPER_LIMIT)
   #error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN. Please update your configuration."
 #elif defined(HAVE_TMCDRIVER)
-  #error "HAVE_TMCDRIVER is now HAVE_TMC26X. Please update your Configuration_adv.h."
+  #error "HAVE_TMCDRIVER is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
+#elif defined(HAVE_TMC26X)
+  #error "HAVE_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
+#elif defined(HAVE_TMC2130)
+  #error "HAVE_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
+#elif defined(HAVE_L6470DRIVER)
+  #error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
 #elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) \
    || defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC)
-  #error "[AXIS]_IS_TMC is now [AXIS]_IS_TMC26X. Please update your Configuration_adv.h."
+  #error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
+#elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) \
+   || defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X)
+  #error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
+#elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) \
+   || defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130)
+  #error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
+#elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) \
+   || defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208)
+  #error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h."
+#elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) \
+   || defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470)
+  #error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
 #elif defined(AUTOMATIC_CURRENT_CONTROL)
   #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
 #elif defined(FILAMENT_CHANGE_LOAD_LENGTH)
@@ -974,15 +992,11 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
  */
 #if ENABLED(Z_SAFE_HOMING)
   #if HAS_BED_PROBE
-    static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, MIN_PROBE_X, MAX_PROBE_X),
-      "Z_SAFE_HOMING_X_POINT is outside the probe region.");
-    static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, MIN_PROBE_Y, MAX_PROBE_Y),
-      "Z_SAFE_HOMING_Y_POINT is outside the probe region.");
+    static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, MIN_PROBE_X, MAX_PROBE_X), "Z_SAFE_HOMING_X_POINT is outside the probe region.");
+    static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, MIN_PROBE_Y, MAX_PROBE_Y), "Z_SAFE_HOMING_Y_POINT is outside the probe region.");
   #else
-    static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS),
-      "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle.");
-    static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS),
-      "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle.");
+    static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS), "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle.");
+    static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS), "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle.");
   #endif
 #endif // Z_SAFE_HOMING
 
@@ -1458,128 +1472,36 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
 #endif
 
 /**
- * Make sure HAVE_TMC26X is warranted
+ * Check existing CS pins against enabled TMC SPI drivers.
  */
-#if ENABLED(HAVE_TMC26X) && !( \
-         ENABLED(  X_IS_TMC26X ) \
-      || ENABLED( X2_IS_TMC26X ) \
-      || ENABLED(  Y_IS_TMC26X ) \
-      || ENABLED( Y2_IS_TMC26X ) \
-      || ENABLED(  Z_IS_TMC26X ) \
-      || ENABLED( Z2_IS_TMC26X ) \
-      || ENABLED( E0_IS_TMC26X ) \
-      || ENABLED( E1_IS_TMC26X ) \
-      || ENABLED( E2_IS_TMC26X ) \
-      || ENABLED( E3_IS_TMC26X ) \
-      || ENABLED( E4_IS_TMC26X ) \
-  )
-  #error "HAVE_TMC26X requires at least one TMC26X stepper to be set."
-#endif
-
-/**
- * Make sure HAVE_TMC2130 is warranted
- */
-#if ENABLED(HAVE_TMC2130)
-  #if !( ENABLED(  X_IS_TMC2130 ) \
-      || ENABLED( X2_IS_TMC2130 ) \
-      || ENABLED(  Y_IS_TMC2130 ) \
-      || ENABLED( Y2_IS_TMC2130 ) \
-      || ENABLED(  Z_IS_TMC2130 ) \
-      || ENABLED( Z2_IS_TMC2130 ) \
-      || ENABLED( E0_IS_TMC2130 ) \
-      || ENABLED( E1_IS_TMC2130 ) \
-      || ENABLED( E2_IS_TMC2130 ) \
-      || ENABLED( E3_IS_TMC2130 ) \
-      || ENABLED( E4_IS_TMC2130 ) )
-    #error "HAVE_TMC2130 requires at least one TMC2130 stepper to be set."
-  #elif ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
-    #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
-  #endif
-
-  #if ENABLED(X_IS_TMC2130) && !PIN_EXISTS(X_CS)
-    #error "X_CS_PIN is required for X_IS_TMC2130. Define X_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(X2_IS_TMC2130) && !PIN_EXISTS(X2_CS)
-    #error "X2_CS_PIN is required for X2_IS_TMC2130. Define X2_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(Y_IS_TMC2130) && !PIN_EXISTS(Y_CS)
-    #error "Y_CS_PIN is required for Y_IS_TMC2130. Define Y_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(Y2_IS_TMC2130) && !PIN_EXISTS(Y2_CS)
-    #error "Y2_CS_PIN is required for Y2_IS_TMC2130. Define Y2_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(Z_IS_TMC2130) && !PIN_EXISTS(Z_CS)
-    #error "Z_CS_PIN is required for Z_IS_TMC2130. Define Z_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(Z2_IS_TMC2130) && !PIN_EXISTS(Z2_CS)
-    #error "Z2_CS_PIN is required for Z2_IS_TMC2130. Define Z2_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(E0_IS_TMC2130) && !PIN_EXISTS(E0_CS)
-    #error "E0_CS_PIN is required for E0_IS_TMC2130. Define E0_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(E1_IS_TMC2130) && !PIN_EXISTS(E1_CS)
-    #error "E1_CS_PIN is required for E1_IS_TMC2130. Define E1_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(E2_IS_TMC2130) && !PIN_EXISTS(E2_CS)
-    #error "E2_CS_PIN is required for E2_IS_TMC2130. Define E2_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(E3_IS_TMC2130) && !PIN_EXISTS(E3_CS)
-    #error "E3_CS_PIN is required for E3_IS_TMC2130. Define E3_CS_PIN in Configuration_adv.h."
-  #elif ENABLED(E4_IS_TMC2130) && !PIN_EXISTS(E4_CS)
-    #error "E4_CS_PIN is required for E4_IS_TMC2130. Define E4_CS_PIN in Configuration_adv.h."
-  #endif
-
-  #if ENABLED(SENSORLESS_HOMING)
-    // Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop
-    // is necessary in order to reset the stallGuard indication between the initial movement of all three
-    // towers to +Z and the individual homing of each tower. This restriction can be removed once a means of
-    // clearing the stallGuard activated status is found.
-    #if ENABLED(DELTA) && !ENABLED(STEALTHCHOP)
-      #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP."
-    #elif X_SENSORLESS && X_HOME_DIR == -1 && (DISABLED(X_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMIN))
-      #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN."
-    #elif X_SENSORLESS && X_HOME_DIR ==  1 && (DISABLED(X_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMAX))
-      #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMAX when homing to X_MAX."
-    #elif Y_SENSORLESS && Y_HOME_DIR == -1 && (DISABLED(Y_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMIN))
-      #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMIN when homing to Y_MIN."
-    #elif Y_SENSORLESS && Y_HOME_DIR ==  1 && (DISABLED(Y_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMAX))
-      #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMAX when homing to Y_MAX."
-    #elif Z_SENSORLESS && Z_HOME_DIR == -1 && (DISABLED(Z_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMIN))
-      #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMIN when homing to Z_MIN."
-    #elif Z_SENSORLESS && Z_HOME_DIR ==  1 && (DISABLED(Z_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMAX))
-      #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMAX when homing to Z_MAX."
-    #elif ENABLED(ENDSTOP_NOISE_FILTER)
-      #error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_FILTER."
-    #endif
-  #endif
-
-  // Sensorless homing is required for both combined steppers in an H-bot
-  #if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS
-    #error "CoreXY requires both X and Y to use sensorless homing if either does."
-  #elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS
-    #error "CoreXZ requires both X and Z to use sensorless homing if either does."
-  #elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS
-    #error "CoreYZ requires both Y and Z to use sensorless homing if either does."
-  #endif
-
-#elif ENABLED(SENSORLESS_HOMING)
-
-  #error "SENSORLESS_HOMING requires TMC2130 stepper drivers."
-
-#endif
-
-/**
- * Make sure HAVE_TMC2208 is warranted
- */
-#if ENABLED(HAVE_TMC2208) && !( \
-       ENABLED(  X_IS_TMC2208 ) \
-    || ENABLED( X2_IS_TMC2208 ) \
-    || ENABLED(  Y_IS_TMC2208 ) \
-    || ENABLED( Y2_IS_TMC2208 ) \
-    || ENABLED(  Z_IS_TMC2208 ) \
-    || ENABLED( Z2_IS_TMC2208 ) \
-    || ENABLED( E0_IS_TMC2208 ) \
-    || ENABLED( E1_IS_TMC2208 ) \
-    || ENABLED( E2_IS_TMC2208 ) \
-    || ENABLED( E3_IS_TMC2208 ) )
-  #error "HAVE_TMC2208 requires at least one TMC2208 stepper to be set."
+#if AXIS_DRIVER_TYPE(X, TMC2130) && !PIN_EXISTS(X_CS)
+  #error "X_CS_PIN is required for TMC2130. Define X_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(X2, TMC2130) && !PIN_EXISTS(X2_CS)
+  #error "X2_CS_PIN is required for X2. Define X2_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(Y, TMC2130) && !PIN_EXISTS(Y_CS)
+  #error "Y_CS_PIN is required for TMC2130. Define Y_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(Y2, TMC2130) && !PIN_EXISTS(Y2_CS)
+  #error "Y2_CS_PIN is required for TMC2130. Define Y2_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(Z, TMC2130) && !PIN_EXISTS(Z_CS)
+  #error "Z_CS_PIN is required for TMC2130. Define Z_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(Z2, TMC2130) && !PIN_EXISTS(Z2_CS)
+  #error "Z2_CS_PIN is required for TMC2130. Define Z2_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(E0, TMC2130) && !PIN_EXISTS(E0_CS)
+  #error "E0_CS_PIN is required for TMC2130. Define E0_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(E1, TMC2130) && !PIN_EXISTS(E1_CS)
+  #error "E1_CS_PIN is required for TMC2130. Define E1_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(E2, TMC2130) && !PIN_EXISTS(E2_CS)
+  #error "E2_CS_PIN is required for TMC2130. Define E2_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(E3, TMC2130) && !PIN_EXISTS(E3_CS)
+  #error "E3_CS_PIN is required for TMC2130. Define E3_CS_PIN in Configuration_adv.h."
+#elif AXIS_DRIVER_TYPE(E4, TMC2130) && !PIN_EXISTS(E4_CS)
+  #error "E4_CS_PIN is required for TMC2130. Define E4_CS_PIN in Configuration_adv.h."
 #endif
 
 /**
  * TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
  */
-#if ENABLED(HAVE_TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
+#if HAS_DRIVER(TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
        defined(X_HARDWARE_SERIAL ) \
     || defined(X2_HARDWARE_SERIAL) \
     || defined(Y_HARDWARE_SERIAL ) \
@@ -1594,113 +1516,52 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
   #error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
 #endif
 
+#if ENABLED(SENSORLESS_HOMING)
+  // Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop
+  // is necessary in order to reset the stallGuard indication between the initial movement of all three
+  // towers to +Z and the individual homing of each tower. This restriction can be removed once a means of
+  // clearing the stallGuard activated status is found.
+  #if ENABLED(DELTA) && !ENABLED(STEALTHCHOP)
+    #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP."
+  #elif X_SENSORLESS && X_HOME_DIR == -1 && (DISABLED(X_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMIN))
+    #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN."
+  #elif X_SENSORLESS && X_HOME_DIR ==  1 && (DISABLED(X_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMAX))
+    #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMAX when homing to X_MAX."
+  #elif Y_SENSORLESS && Y_HOME_DIR == -1 && (DISABLED(Y_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMIN))
+    #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMIN when homing to Y_MIN."
+  #elif Y_SENSORLESS && Y_HOME_DIR ==  1 && (DISABLED(Y_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMAX))
+    #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMAX when homing to Y_MAX."
+  #elif Z_SENSORLESS && Z_HOME_DIR == -1 && (DISABLED(Z_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMIN))
+    #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMIN when homing to Z_MIN."
+  #elif Z_SENSORLESS && Z_HOME_DIR ==  1 && (DISABLED(Z_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMAX))
+    #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMAX when homing to Z_MAX."
+  #elif ENABLED(ENDSTOP_NOISE_FILTER)
+    #error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_FILTER."
+  #endif
+#endif
+
+// Sensorless homing is required for both combined steppers in an H-bot
+#if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS
+  #error "CoreXY requires both X and Y to use sensorless homing if either does."
+#elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS
+  #error "CoreXZ requires both X and Z to use sensorless homing if either does."
+#elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS
+  #error "CoreYZ requires both Y and Z to use sensorless homing if either does."
+#endif
+
 #if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
   #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
 #endif
-
-#if ENABLED(TMC_Z_CALIBRATION) && !Z_IS_TRINAMIC && !Z2_IS_TRINAMIC
+#if ENABLED(TMC_Z_CALIBRATION) && !AXIS_IS_TMC(Z) && !AXIS_IS_TMC(Z2)
   #error "TMC_Z_CALIBRATION requires at least one TMC driver on Z axis"
 #endif
 
-/**
- * Make sure HAVE_L6470DRIVER is warranted
- */
-#if ENABLED(HAVE_L6470DRIVER) && !( \
-         ENABLED(  X_IS_L6470 ) \
-      || ENABLED( X2_IS_L6470 ) \
-      || ENABLED(  Y_IS_L6470 ) \
-      || ENABLED( Y2_IS_L6470 ) \
-      || ENABLED(  Z_IS_L6470 ) \
-      || ENABLED( Z2_IS_L6470 ) \
-      || ENABLED( E0_IS_L6470 ) \
-      || ENABLED( E1_IS_L6470 ) \
-      || ENABLED( E2_IS_L6470 ) \
-      || ENABLED( E3_IS_L6470 ) \
-      || ENABLED( E4_IS_L6470 ) \
-  )
-  #error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set."
-#endif
-
-/**
- * Check that each axis has only one driver selected
- */
-#if 1 < 0 \
-  + ENABLED(X_IS_TMC26X) \
-  + ENABLED(X_IS_TMC2130) \
-  + ENABLED(X_IS_TMC2208) \
-  + ENABLED(X_IS_L6470)
-  #error "Please enable only one stepper driver for the X axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(X2_IS_TMC26X) \
-  + ENABLED(X2_IS_TMC2130) \
-  + ENABLED(X2_IS_TMC2208) \
-  + ENABLED(X2_IS_L6470)
-  #error "Please enable only one stepper driver for the X2 axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(Y_IS_TMC26X) \
-  + ENABLED(Y_IS_TMC2130) \
-  + ENABLED(Y_IS_TMC2208) \
-  + ENABLED(Y_IS_L6470)
-  #error "Please enable only one stepper driver for the Y axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(Y2_IS_TMC26X) \
-  + ENABLED(Y2_IS_TMC2130) \
-  + ENABLED(Y2_IS_TMC2208) \
-  + ENABLED(Y2_IS_L6470)
-  #error "Please enable only one stepper driver for the Y2 axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(Z_IS_TMC26X) \
-  + ENABLED(Z_IS_TMC2130) \
-  + ENABLED(Z_IS_TMC2208) \
-  + ENABLED(Z_IS_L6470)
-  #error "Please enable only one stepper driver for the Z axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(Z2_IS_TMC26X) \
-  + ENABLED(Z2_IS_TMC2130) \
-  + ENABLED(Z2_IS_TMC2208) \
-  + ENABLED(Z2_IS_L6470)
-  #error "Please enable only one stepper driver for the Z2 axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(E0_IS_TMC26X) \
-  + ENABLED(E0_IS_TMC2130) \
-  + ENABLED(E0_IS_TMC2208) \
-  + ENABLED(E0_IS_L6470)
-  #error "Please enable only one stepper driver for the E0 axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(E1_IS_TMC26X) \
-  + ENABLED(E1_IS_TMC2130) \
-  + ENABLED(E1_IS_TMC2208) \
-  + ENABLED(E1_IS_L6470)
-  #error "Please enable only one stepper driver for the E1 axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(E2_IS_TMC26X) \
-  + ENABLED(E2_IS_TMC2130) \
-  + ENABLED(E2_IS_TMC2208) \
-  + ENABLED(E2_IS_L6470)
-  #error "Please enable only one stepper driver for the E2 axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(E3_IS_TMC26X) \
-  + ENABLED(E3_IS_TMC2130) \
-  + ENABLED(E3_IS_TMC2208) \
-  + ENABLED(E3_IS_L6470)
-  #error "Please enable only one stepper driver for the E3 axis."
-#endif
-#if 1 < 0 \
-  + ENABLED(E4_IS_TMC26X) \
-  + ENABLED(E4_IS_TMC2130) \
-  + ENABLED(E4_IS_TMC2208) \
-  + ENABLED(E4_IS_L6470)
-  #error "Please enable only one stepper driver for the E4 axis."
+#if ENABLED(SENSORLESS_HOMING) && !HAS_STALLGUARD
+  #error "SENSORLESS_HOMING requires TMC2130 or TMC2660 stepper drivers."
 #endif
+#if ENABLED(STEALTHCHOP) && !HAS_STEALTHCHOP
+  #error "STEALTHCHOP requires TMC2130 or TMC2208 stepper drivers."
+ #endif
 
 /**
  * Digipot requirement
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index f9fdbd3800..8af22648b6 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -681,57 +681,57 @@ void MarlinSettings::postprocess() {
 
     uint16_t tmc_stepper_current[TMC_AXES] = {
       #if HAS_TRINAMIC
-        #if X_IS_TRINAMIC
+        #if AXIS_IS_TMC(X)
           stepperX.getCurrent(),
         #else
           0,
         #endif
-        #if Y_IS_TRINAMIC
+        #if AXIS_IS_TMC(Y)
           stepperY.getCurrent(),
         #else
           0,
         #endif
-        #if Z_IS_TRINAMIC
+        #if AXIS_IS_TMC(Z)
           stepperZ.getCurrent(),
         #else
           0,
         #endif
-        #if X2_IS_TRINAMIC
+        #if AXIS_IS_TMC(X2)
           stepperX2.getCurrent(),
         #else
           0,
         #endif
-        #if Y2_IS_TRINAMIC
+        #if AXIS_IS_TMC(Y2)
           stepperY2.getCurrent(),
         #else
           0,
         #endif
-        #if Z2_IS_TRINAMIC
+        #if AXIS_IS_TMC(Z2)
           stepperZ2.getCurrent(),
         #else
           0,
         #endif
-        #if E0_IS_TRINAMIC
+        #if AXIS_IS_TMC(E0)
           stepperE0.getCurrent(),
         #else
           0,
         #endif
-        #if E1_IS_TRINAMIC
+        #if AXIS_IS_TMC(E1)
           stepperE1.getCurrent(),
         #else
           0,
         #endif
-        #if E2_IS_TRINAMIC
+        #if AXIS_IS_TMC(E2)
           stepperE2.getCurrent(),
         #else
           0,
         #endif
-        #if E3_IS_TRINAMIC
+        #if AXIS_IS_TMC(E3)
           stepperE3.getCurrent(),
         #else
           0,
         #endif
-        #if E4_IS_TRINAMIC
+        #if AXIS_IS_TMC(E4)
           stepperE4.getCurrent()
         #else
           0
@@ -750,57 +750,57 @@ void MarlinSettings::postprocess() {
 
     uint32_t tmc_hybrid_threshold[TMC_AXES] = {
       #if ENABLED(HYBRID_THRESHOLD)
-        #if X_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(X)
           TMC_GET_PWMTHRS(X, X),
         #else
           X_HYBRID_THRESHOLD,
         #endif
-        #if Y_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(Y)
           TMC_GET_PWMTHRS(Y, Y),
         #else
           Y_HYBRID_THRESHOLD,
         #endif
-        #if Z_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(Z)
           TMC_GET_PWMTHRS(Z, Z),
         #else
           Z_HYBRID_THRESHOLD,
         #endif
-        #if X2_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(X2)
           TMC_GET_PWMTHRS(X, X2),
         #else
           X2_HYBRID_THRESHOLD,
         #endif
-        #if Y2_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(Y2)
           TMC_GET_PWMTHRS(Y, Y2),
         #else
           Y2_HYBRID_THRESHOLD,
         #endif
-        #if Z2_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(Z2)
           TMC_GET_PWMTHRS(Z, Z2),
         #else
           Z2_HYBRID_THRESHOLD,
         #endif
-        #if E0_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(E0)
           TMC_GET_PWMTHRS(E, E0),
         #else
           E0_HYBRID_THRESHOLD,
         #endif
-        #if E1_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(E1)
           TMC_GET_PWMTHRS(E, E1),
         #else
           E1_HYBRID_THRESHOLD,
         #endif
-        #if E2_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(E2)
           TMC_GET_PWMTHRS(E, E2),
         #else
           E2_HYBRID_THRESHOLD,
         #endif
-        #if E3_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(E3)
           TMC_GET_PWMTHRS(E, E3),
         #else
           E3_HYBRID_THRESHOLD,
         #endif
-        #if E4_IS_TRINAMIC
+        #if AXIS_HAS_STEALTHCHOP(E4)
           TMC_GET_PWMTHRS(E, E4)
         #else
           E4_HYBRID_THRESHOLD
@@ -818,17 +818,17 @@ void MarlinSettings::postprocess() {
     //
     int16_t tmc_sgt[XYZ] = {
       #if ENABLED(SENSORLESS_HOMING)
-        #if defined(X_HOMING_SENSITIVITY) && (ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS))
+        #if X_SENSORLESS
           stepperX.sgt(),
         #else
           0,
         #endif
-        #if defined(Y_HOMING_SENSITIVITY) && (ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS))
+        #if Y_SENSORLESS
           stepperY.sgt(),
         #else
           0,
         #endif
-        #if defined(Z_HOMING_SENSITIVITY) && (ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS))
+        #if Z_SENSORLESS
           stepperZ.sgt()
         #else
           0
@@ -1311,37 +1311,37 @@ void MarlinSettings::postprocess() {
         uint16_t currents[TMC_AXES];
         EEPROM_READ(currents);
         if (!validating) {
-          #if X_IS_TRINAMIC
+          #if AXIS_IS_TMC(X)
             SET_CURR(X);
           #endif
-          #if Y_IS_TRINAMIC
+          #if AXIS_IS_TMC(Y)
             SET_CURR(Y);
           #endif
-          #if Z_IS_TRINAMIC
+          #if AXIS_IS_TMC(Z)
             SET_CURR(Z);
           #endif
-          #if X2_IS_TRINAMIC
+          #if AXIS_IS_TMC(X2)
             SET_CURR(X2);
           #endif
-          #if Y2_IS_TRINAMIC
+          #if AXIS_IS_TMC(Y2)
             SET_CURR(Y2);
           #endif
-          #if Z2_IS_TRINAMIC
+          #if AXIS_IS_TMC(Z2)
             SET_CURR(Z2);
           #endif
-          #if E0_IS_TRINAMIC
+          #if AXIS_IS_TMC(E0)
             SET_CURR(E0);
           #endif
-          #if E1_IS_TRINAMIC
+          #if AXIS_IS_TMC(E1)
             SET_CURR(E1);
           #endif
-          #if E2_IS_TRINAMIC
+          #if AXIS_IS_TMC(E2)
             SET_CURR(E2);
           #endif
-          #if E3_IS_TRINAMIC
+          #if AXIS_IS_TMC(E3)
             SET_CURR(E3);
           #endif
-          #if E4_IS_TRINAMIC
+          #if AXIS_IS_TMC(E4)
             SET_CURR(E4);
           #endif
         }
@@ -1355,37 +1355,37 @@ void MarlinSettings::postprocess() {
         uint32_t tmc_hybrid_threshold[TMC_AXES];
         EEPROM_READ(tmc_hybrid_threshold);
         if (!validating) {
-          #if X_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(X)
             TMC_SET_PWMTHRS(X, X);
           #endif
-          #if Y_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(Y)
             TMC_SET_PWMTHRS(Y, Y);
           #endif
-          #if Z_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(Z)
             TMC_SET_PWMTHRS(Z, Z);
           #endif
-          #if X2_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(X2)
             TMC_SET_PWMTHRS(X, X2);
           #endif
-          #if Y2_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(Y2)
             TMC_SET_PWMTHRS(Y, Y2);
           #endif
-          #if Z2_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(Z2)
             TMC_SET_PWMTHRS(Z, Z2);
           #endif
-          #if E0_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(E0)
             TMC_SET_PWMTHRS(E, E0);
           #endif
-          #if E1_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(E1)
             TMC_SET_PWMTHRS(E, E1);
           #endif
-          #if E2_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(E2)
             TMC_SET_PWMTHRS(E, E2);
           #endif
-          #if E3_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(E3)
             TMC_SET_PWMTHRS(E, E3);
           #endif
-          #if E4_IS_TRINAMIC
+          #if AXIS_HAS_STEALTHCHOP(E4)
             TMC_SET_PWMTHRS(E, E4);
           #endif
         }
@@ -1405,26 +1405,26 @@ void MarlinSettings::postprocess() {
       #if ENABLED(SENSORLESS_HOMING)
         if (!validating) {
           #ifdef X_HOMING_SENSITIVITY
-            #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)
+            #if AXIS_HAS_STALLGUARD(X)
               stepperX.sgt(tmc_sgt[0]);
             #endif
-            #if ENABLED(X2_IS_TMC2130)
+            #if AXIS_HAS_STALLGUARD(X2)
               stepperX2.sgt(tmc_sgt[0]);
             #endif
           #endif
           #ifdef Y_HOMING_SENSITIVITY
-            #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)
+            #if AXIS_HAS_STALLGUARD(Y)
               stepperY.sgt(tmc_sgt[1]);
             #endif
-            #if ENABLED(Y2_IS_TMC2130)
+            #if AXIS_HAS_STALLGUARD(Y2)
               stepperY2.sgt(tmc_sgt[1]);
             #endif
           #endif
           #ifdef Z_HOMING_SENSITIVITY
-            #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)
+            #if AXIS_HAS_STALLGUARD(Z)
               stepperZ.sgt(tmc_sgt[2]);
             #endif
-            #if ENABLED(Z2_IS_TMC2130)
+            #if AXIS_HAS_STALLGUARD(Z2)
               stepperZ2.sgt(tmc_sgt[2]);
             #endif
           #endif
@@ -2445,61 +2445,61 @@ void MarlinSettings::reset(PORTARG_SOLO) {
     #if HAS_TRINAMIC
 
       /**
-       * TMC2130 / TMC2208 / TRAMS stepper driver current
+       * TMC2130 / TMC2208 stepper driver current
        */
       if (!forReplay) {
         CONFIG_ECHO_START;
         SERIAL_ECHOLNPGM_P(port, "Stepper driver current:");
       }
       CONFIG_ECHO_START;
-      #if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC
+      #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
         say_M906(PORTVAR_SOLO);
       #endif
-      #if X_IS_TRINAMIC
+      #if AXIS_IS_TMC(X)
         SERIAL_ECHOPAIR_P(port, " X", stepperX.getCurrent());
       #endif
-      #if Y_IS_TRINAMIC
+      #if AXIS_IS_TMC(Y)
         SERIAL_ECHOPAIR_P(port, " Y", stepperY.getCurrent());
       #endif
-      #if Z_IS_TRINAMIC
+      #if AXIS_IS_TMC(Z)
         SERIAL_ECHOPAIR_P(port, " Z", stepperZ.getCurrent());
       #endif
-      #if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC
+      #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
         SERIAL_EOL_P(port);
       #endif
-      #if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC
+      #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
         say_M906(PORTVAR_SOLO);
         SERIAL_ECHOPGM_P(port, " I1");
       #endif
-      #if X2_IS_TRINAMIC
+      #if AXIS_IS_TMC(X2)
         SERIAL_ECHOPAIR_P(port, " X", stepperX2.getCurrent());
       #endif
-      #if Y2_IS_TRINAMIC
+      #if AXIS_IS_TMC(Y2)
         SERIAL_ECHOPAIR_P(port, " Y", stepperY2.getCurrent());
       #endif
-      #if Z2_IS_TRINAMIC
+      #if AXIS_IS_TMC(Z2)
         SERIAL_ECHOPAIR_P(port, " Z", stepperZ2.getCurrent());
       #endif
-      #if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC
+      #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
         SERIAL_EOL_P(port);
       #endif
-      #if E0_IS_TRINAMIC
+      #if AXIS_IS_TMC(E0)
         say_M906(PORTVAR_SOLO);
         SERIAL_ECHOLNPAIR_P(port, " T0 E", stepperE0.getCurrent());
       #endif
-      #if E_STEPPERS > 1 && E1_IS_TRINAMIC
+      #if E_STEPPERS > 1 && AXIS_IS_TMC(E1)
         say_M906(PORTVAR_SOLO);
         SERIAL_ECHOLNPAIR_P(port, " T1 E", stepperE1.getCurrent());
       #endif
-      #if E_STEPPERS > 2 && E2_IS_TRINAMIC
+      #if E_STEPPERS > 2 && AXIS_IS_TMC(E2)
         say_M906(PORTVAR_SOLO);
         SERIAL_ECHOLNPAIR_P(port, " T2 E", stepperE2.getCurrent());
       #endif
-      #if E_STEPPERS > 3 && E3_IS_TRINAMIC
+      #if E_STEPPERS > 3 && AXIS_IS_TMC(E3)
         say_M906(PORTVAR_SOLO);
         SERIAL_ECHOLNPAIR_P(port, " T3 E", stepperE3.getCurrent());
       #endif
-      #if E_STEPPERS > 4 && E4_IS_TRINAMIC
+      #if E_STEPPERS > 4 && AXIS_IS_TMC(E4)
         say_M906(PORTVAR_SOLO);
         SERIAL_ECHOLNPAIR_P(port, " T4 E", stepperE4.getCurrent());
       #endif
@@ -2514,54 +2514,54 @@ void MarlinSettings::reset(PORTARG_SOLO) {
           SERIAL_ECHOLNPGM_P(port, "Hybrid Threshold:");
         }
         CONFIG_ECHO_START;
-        #if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC
+        #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
           say_M913(PORTVAR_SOLO);
         #endif
-        #if X_IS_TRINAMIC
+        #if AXIS_IS_TMC(X)
           SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X));
         #endif
-        #if Y_IS_TRINAMIC
+        #if AXIS_IS_TMC(Y)
           SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y));
         #endif
-        #if Z_IS_TRINAMIC
+        #if AXIS_IS_TMC(Z)
           SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z));
         #endif
-        #if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC
+        #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
           SERIAL_EOL_P(port);
         #endif
-        #if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC
+        #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
           say_M913(PORTVAR_SOLO);
           SERIAL_ECHOPGM_P(port, " I1");
         #endif
-        #if X2_IS_TRINAMIC
+        #if AXIS_IS_TMC(X2)
           SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X2));
         #endif
-        #if Y2_IS_TRINAMIC
+        #if AXIS_IS_TMC(Y2)
           SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y2));
         #endif
-        #if Z2_IS_TRINAMIC
+        #if AXIS_IS_TMC(Z2)
           SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z2));
         #endif
-        #if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC
+        #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
           SERIAL_EOL_P(port);
         #endif
-        #if E0_IS_TRINAMIC
+        #if AXIS_IS_TMC(E0)
           say_M913(PORTVAR_SOLO);
           SERIAL_ECHOLNPAIR_P(port, " T0 E", TMC_GET_PWMTHRS(E, E0));
         #endif
-        #if E_STEPPERS > 1 && E1_IS_TRINAMIC
+        #if E_STEPPERS > 1 && AXIS_IS_TMC(E1)
           say_M913(PORTVAR_SOLO);
           SERIAL_ECHOLNPAIR_P(port, " T1 E", TMC_GET_PWMTHRS(E, E1));
         #endif
-        #if E_STEPPERS > 2 && E2_IS_TRINAMIC
+        #if E_STEPPERS > 2 && AXIS_IS_TMC(E2)
           say_M913(PORTVAR_SOLO);
           SERIAL_ECHOLNPAIR_P(port, " T2 E", TMC_GET_PWMTHRS(E, E2));
         #endif
-        #if E_STEPPERS > 3 && E3_IS_TRINAMIC
+        #if E_STEPPERS > 3 && AXIS_IS_TMC(E3)
           say_M913(PORTVAR_SOLO);
           SERIAL_ECHOLNPAIR_P(port, " T3 E", TMC_GET_PWMTHRS(E, E3));
         #endif
-        #if E_STEPPERS > 4 && E4_IS_TRINAMIC
+        #if E_STEPPERS > 4 && AXIS_IS_TMC(E4)
           say_M913(PORTVAR_SOLO);
           SERIAL_ECHOLNPAIR_P(port, " T4 E", TMC_GET_PWMTHRS(E, E4));
         #endif
@@ -2577,26 +2577,23 @@ void MarlinSettings::reset(PORTARG_SOLO) {
           SERIAL_ECHOLNPGM_P(port, "Sensorless homing threshold:");
         }
         CONFIG_ECHO_START;
-        #define HAS_X_SENSORLESS (defined(X_HOMING_SENSITIVITY) && (ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)))
-        #define HAS_Y_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && (ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)))
-        #define HAS_Z_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && (ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)))
-        #if HAS_X_SENSORLESS || HAS_Y_SENSORLESS || HAS_Z_SENSORLESS
+        #if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
           say_M914(PORTVAR_SOLO);
-          #if HAS_X_SENSORLESS
+          #if X_SENSORLESS
             SERIAL_ECHOPAIR_P(port, " X", stepperX.sgt());
           #endif
-          #if HAS_Y_SENSORLESS
+          #if Y_SENSORLESS
             SERIAL_ECHOPAIR_P(port, " Y", stepperY.sgt());
           #endif
-          #if HAS_Z_SENSORLESS
+          #if Z_SENSORLESS
             SERIAL_ECHOPAIR_P(port, " Z", stepperZ.sgt());
           #endif
           SERIAL_EOL_P(port);
         #endif
 
-        #define HAS_X2_SENSORLESS (defined(X_HOMING_SENSITIVITY) && ENABLED(X2_IS_TMC2130))
-        #define HAS_Y2_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && ENABLED(Y2_IS_TMC2130))
-        #define HAS_Z2_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && ENABLED(Z2_IS_TMC2130))
+        #define HAS_X2_SENSORLESS (defined(X_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(X2))
+        #define HAS_Y2_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(Y2))
+        #define HAS_Z2_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z2))
         #if HAS_X2_SENSORLESS || HAS_Y2_SENSORLESS || HAS_Z2_SENSORLESS
           say_M914(PORTVAR_SOLO);
           SERIAL_ECHOPGM_P(port, " I1");
diff --git a/Marlin/src/module/stepper_indirection.cpp b/Marlin/src/module/stepper_indirection.cpp
index bf63e61b6d..8858d22fdb 100644
--- a/Marlin/src/module/stepper_indirection.cpp
+++ b/Marlin/src/module/stepper_indirection.cpp
@@ -38,7 +38,7 @@
 //
 // TMC26X Driver objects and inits
 //
-#if ENABLED(HAVE_TMC26X)
+#if HAS_DRIVER(TMC26X)
   #include <SPI.h>
 
   #ifdef STM32F7
@@ -49,37 +49,37 @@
 
   #define _TMC26X_DEFINE(ST) TMC26XStepper stepper##ST(200, ST##_CS_PIN, ST##_STEP_PIN, ST##_DIR_PIN, ST##_MAX_CURRENT, ST##_SENSE_RESISTOR)
 
-  #if ENABLED(X_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(X, TMC26X)
     _TMC26X_DEFINE(X);
   #endif
-  #if ENABLED(X2_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(X2, TMC26X)
     _TMC26X_DEFINE(X2);
   #endif
-  #if ENABLED(Y_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(Y, TMC26X)
     _TMC26X_DEFINE(Y);
   #endif
-  #if ENABLED(Y2_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(Y2, TMC26X)
     _TMC26X_DEFINE(Y2);
   #endif
-  #if ENABLED(Z_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(Z, TMC26X)
     _TMC26X_DEFINE(Z);
   #endif
-  #if ENABLED(Z2_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(Z2, TMC26X)
     _TMC26X_DEFINE(Z2);
   #endif
-  #if ENABLED(E0_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E0, TMC26X)
     _TMC26X_DEFINE(E0);
   #endif
-  #if ENABLED(E1_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E1, TMC26X)
     _TMC26X_DEFINE(E1);
   #endif
-  #if ENABLED(E2_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E2, TMC26X)
     _TMC26X_DEFINE(E2);
   #endif
-  #if ENABLED(E3_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E3, TMC26X)
     _TMC26X_DEFINE(E3);
   #endif
-  #if ENABLED(E4_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E4, TMC26X)
     _TMC26X_DEFINE(E4);
   #endif
 
@@ -89,46 +89,46 @@
   }while(0)
 
   void tmc26x_init_to_defaults() {
-    #if ENABLED(X_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(X, TMC26X)
       _TMC26X_INIT(X);
     #endif
-    #if ENABLED(X2_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(X2, TMC26X)
       _TMC26X_INIT(X2);
     #endif
-    #if ENABLED(Y_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(Y, TMC26X)
       _TMC26X_INIT(Y);
     #endif
-    #if ENABLED(Y2_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(Y2, TMC26X)
       _TMC26X_INIT(Y2);
     #endif
-    #if ENABLED(Z_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(Z, TMC26X)
       _TMC26X_INIT(Z);
     #endif
-    #if ENABLED(Z2_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(Z2, TMC26X)
       _TMC26X_INIT(Z2);
     #endif
-    #if ENABLED(E0_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(E0, TMC26X)
       _TMC26X_INIT(E0);
     #endif
-    #if ENABLED(E1_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(E1, TMC26X)
       _TMC26X_INIT(E1);
     #endif
-    #if ENABLED(E2_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(E2, TMC26X)
       _TMC26X_INIT(E2);
     #endif
-    #if ENABLED(E3_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(E3, TMC26X)
       _TMC26X_INIT(E3);
     #endif
-    #if ENABLED(E4_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(E4, TMC26X)
       _TMC26X_INIT(E4);
     #endif
   }
-#endif // HAVE_TMC26X
+#endif // TMC26X
 
 //
 // TMC2130 Driver objects and inits
 //
-#if ENABLED(HAVE_TMC2130)
+#if HAS_DRIVER(TMC2130)
 
   #include <SPI.h>
   #include <TMC2130Stepper.h>
@@ -146,37 +146,37 @@
   #endif
 
   // Stepper objects of TMC2130 steppers used
-  #if ENABLED(X_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(X, TMC2130)
     _TMC2130_DEFINE(X);
   #endif
-  #if ENABLED(X2_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(X2, TMC2130)
     _TMC2130_DEFINE(X2);
   #endif
-  #if ENABLED(Y_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(Y, TMC2130)
     _TMC2130_DEFINE(Y);
   #endif
-  #if ENABLED(Y2_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(Y2, TMC2130)
     _TMC2130_DEFINE(Y2);
   #endif
-  #if ENABLED(Z_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(Z, TMC2130)
     _TMC2130_DEFINE(Z);
   #endif
-  #if ENABLED(Z2_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(Z2, TMC2130)
     _TMC2130_DEFINE(Z2);
   #endif
-  #if ENABLED(E0_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(E0, TMC2130)
     _TMC2130_DEFINE(E0);
   #endif
-  #if ENABLED(E1_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(E1, TMC2130)
     _TMC2130_DEFINE(E1);
   #endif
-  #if ENABLED(E2_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(E2, TMC2130)
     _TMC2130_DEFINE(E2);
   #endif
-  #if ENABLED(E3_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(E3, TMC2130)
     _TMC2130_DEFINE(E3);
   #endif
-  #if ENABLED(E4_IS_TMC2130)
+  #if AXIS_DRIVER_TYPE(E4, TMC2130)
     _TMC2130_DEFINE(E4);
   #endif
 
@@ -213,74 +213,74 @@
   #define _TMC2130_INIT(ST, SPMM) tmc2130_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM)
 
   void tmc2130_init_to_defaults() {
-    #if ENABLED(X_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(X, TMC2130)
       _TMC2130_INIT( X, planner.axis_steps_per_mm[X_AXIS]);
     #endif
-    #if ENABLED(X2_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(X2, TMC2130)
       _TMC2130_INIT(X2, planner.axis_steps_per_mm[X_AXIS]);
     #endif
-    #if ENABLED(Y_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Y, TMC2130)
       _TMC2130_INIT( Y, planner.axis_steps_per_mm[Y_AXIS]);
     #endif
-    #if ENABLED(Y2_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Y2, TMC2130)
       _TMC2130_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]);
     #endif
-    #if ENABLED(Z_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Z, TMC2130)
       _TMC2130_INIT( Z, planner.axis_steps_per_mm[Z_AXIS]);
     #endif
-    #if ENABLED(Z2_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Z2, TMC2130)
       _TMC2130_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]);
     #endif
-    #if ENABLED(E0_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E0, TMC2130)
       _TMC2130_INIT(E0, planner.axis_steps_per_mm[E_AXIS]);
     #endif
-    #if ENABLED(E1_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E1, TMC2130)
       { constexpr int extruder = 1; _TMC2130_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); }
     #endif
-    #if ENABLED(E2_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E2, TMC2130)
       { constexpr int extruder = 2; _TMC2130_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); }
     #endif
-    #if ENABLED(E3_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E3, TMC2130)
       { constexpr int extruder = 3; _TMC2130_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); }
     #endif
-    #if ENABLED(E4_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E4, TMC2130)
       { constexpr int extruder = 4; _TMC2130_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); }
     #endif
 
     #if ENABLED(SENSORLESS_HOMING)
       #define TMC_INIT_SGT(P,Q) stepper##Q.sgt(P##_HOMING_SENSITIVITY);
       #if X_SENSORLESS
-        #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)
+        #if AXIS_DRIVER_TYPE(X, TMC2130)
           stepperX.sgt(X_HOMING_SENSITIVITY);
         #endif
-        #if ENABLED(X2_IS_TMC2130)
+        #if AXIS_DRIVER_TYPE(X2, TMC2130)
           stepperX2.sgt(X_HOMING_SENSITIVITY);
         #endif
       #endif
       #if Y_SENSORLESS
-        #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)
+        #if AXIS_DRIVER_TYPE(Y, TMC2130)
           stepperY.sgt(Y_HOMING_SENSITIVITY);
         #endif
-        #if ENABLED(Y2_IS_TMC2130)
+        #if AXIS_DRIVER_TYPE(Y2, TMC2130)
           stepperY2.sgt(Y_HOMING_SENSITIVITY);
         #endif
       #endif
       #if Z_SENSORLESS
-        #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)
+        #if AXIS_DRIVER_TYPE(Z, TMC2130)
           stepperZ.sgt(Z_HOMING_SENSITIVITY);
         #endif
-        #if ENABLED(Z2_IS_TMC2130)
+        #if AXIS_DRIVER_TYPE(Z2, TMC2130)
           stepperZ2.sgt(Z_HOMING_SENSITIVITY);
         #endif
       #endif
     #endif
   }
-#endif // HAVE_TMC2130
+#endif // TMC2130
 
 //
 // TMC2208 Driver objects and inits
 //
-#if ENABLED(HAVE_TMC2208)
+#if HAS_DRIVER(TMC2208)
 
   #include <SoftwareSerial.h>
   #include <HardwareSerial.h>
@@ -296,77 +296,77 @@
                                        TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL, ST##_SERIAL_RX_PIN > -1)
 
   // Stepper objects of TMC2208 steppers used
-  #if ENABLED(X_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(X, TMC2208)
     #ifdef X_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(X);
     #else
       _TMC2208_DEFINE_SOFTWARE(X);
     #endif
   #endif
-  #if ENABLED(X2_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(X2, TMC2208)
     #ifdef X2_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(X2);
     #else
       _TMC2208_DEFINE_SOFTWARE(X2);
     #endif
   #endif
-  #if ENABLED(Y_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(Y, TMC2208)
     #ifdef Y_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(Y);
     #else
       _TMC2208_DEFINE_SOFTWARE(Y);
     #endif
   #endif
-  #if ENABLED(Y2_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(Y2, TMC2208)
     #ifdef Y2_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(Y2);
     #else
       _TMC2208_DEFINE_SOFTWARE(Y2);
     #endif
   #endif
-  #if ENABLED(Z_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(Z, TMC2208)
     #ifdef Z_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(Z);
     #else
       _TMC2208_DEFINE_SOFTWARE(Z);
     #endif
   #endif
-  #if ENABLED(Z2_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(Z2, TMC2208)
     #ifdef Z2_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(Z2);
     #else
       _TMC2208_DEFINE_SOFTWARE(Z2);
     #endif
   #endif
-  #if ENABLED(E0_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(E0, TMC2208)
     #ifdef E0_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(E0);
     #else
       _TMC2208_DEFINE_SOFTWARE(E0);
     #endif
   #endif
-  #if ENABLED(E1_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(E1, TMC2208)
     #ifdef E1_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(E1);
     #else
       _TMC2208_DEFINE_SOFTWARE(E1);
     #endif
   #endif
-  #if ENABLED(E2_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(E2, TMC2208)
     #ifdef E2_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(E2);
     #else
       _TMC2208_DEFINE_SOFTWARE(E2);
     #endif
   #endif
-  #if ENABLED(E3_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(E3, TMC2208)
     #ifdef E3_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(E3);
     #else
       _TMC2208_DEFINE_SOFTWARE(E3);
     #endif
   #endif
-  #if ENABLED(E4_IS_TMC2208)
+  #if AXIS_DRIVER_TYPE(E4, TMC2208)
     #ifdef E4_HARDWARE_SERIAL
       _TMC2208_DEFINE_HARDWARE(E4);
     #else
@@ -375,37 +375,37 @@
   #endif
 
   void tmc2208_serial_begin() {
-    #if ENABLED(X_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(X, TMC2208)
       X_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(X2_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(X2, TMC2208)
       X2_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(Y_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(Y, TMC2208)
       Y_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(Y2_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(Y2, TMC2208)
       Y2_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(Z_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(Z, TMC2208)
       Z_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(Z2_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(Z2, TMC2208)
       Z2_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(E0_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E0, TMC2208)
       E0_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(E1_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E1, TMC2208)
       E1_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(E2_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E2, TMC2208)
       E2_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(E3_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E3, TMC2208)
       E3_HARDWARE_SERIAL.begin(115200);
     #endif
-    #if ENABLED(E4_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E4, TMC2208)
       E4_HARDWARE_SERIAL.begin(115200);
     #endif
   }
@@ -449,94 +449,94 @@
   #define _TMC2208_INIT(ST, SPMM) tmc2208_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM)
 
   void tmc2208_init_to_defaults() {
-    #if ENABLED(X_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(X, TMC2208)
       _TMC2208_INIT(X, planner.axis_steps_per_mm[X_AXIS]);
     #endif
-    #if ENABLED(X2_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(X2, TMC2208)
       _TMC2208_INIT(X2, planner.axis_steps_per_mm[X_AXIS]);
     #endif
-    #if ENABLED(Y_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(Y, TMC2208)
       _TMC2208_INIT(Y, planner.axis_steps_per_mm[Y_AXIS]);
     #endif
-    #if ENABLED(Y2_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(Y2, TMC2208)
       _TMC2208_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]);
     #endif
-    #if ENABLED(Z_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(Z, TMC2208)
       _TMC2208_INIT(Z, planner.axis_steps_per_mm[Z_AXIS]);
     #endif
-    #if ENABLED(Z2_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(Z2, TMC2208)
       _TMC2208_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]);
     #endif
-    #if ENABLED(E0_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E0, TMC2208)
       _TMC2208_INIT(E0, planner.axis_steps_per_mm[E_AXIS]);
     #endif
-    #if ENABLED(E1_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E1, TMC2208)
       { constexpr int extruder = 1; _TMC2208_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); }
     #endif
-    #if ENABLED(E2_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E2, TMC2208)
       { constexpr int extruder = 2; _TMC2208_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); }
     #endif
-    #if ENABLED(E3_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E3, TMC2208)
       { constexpr int extruder = 3; _TMC2208_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); }
     #endif
-    #if ENABLED(E4_IS_TMC2208)
+    #if AXIS_DRIVER_TYPE(E4, TMC2208)
       { constexpr int extruder = 4; _TMC2208_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); }
     #endif
   }
-#endif // HAVE_TMC2208
+#endif // TMC2208
 
 void restore_stepper_drivers() {
-  #if X_IS_TRINAMIC
+  #if AXIS_IS_TMC(X)
     stepperX.push();
   #endif
-  #if X2_IS_TRINAMIC
+  #if AXIS_IS_TMC(X2)
     stepperX2.push();
   #endif
-  #if Y_IS_TRINAMIC
+  #if AXIS_IS_TMC(Y)
     stepperY.push();
   #endif
-  #if Y2_IS_TRINAMIC
+  #if AXIS_IS_TMC(Y2)
     stepperY2.push();
   #endif
-  #if Z_IS_TRINAMIC
+  #if AXIS_IS_TMC(Z)
     stepperZ.push();
   #endif
-  #if Z2_IS_TRINAMIC
+  #if AXIS_IS_TMC(Z2)
     stepperZ2.push();
   #endif
-  #if E0_IS_TRINAMIC
+  #if AXIS_IS_TMC(E0)
     stepperE0.push();
   #endif
-  #if E1_IS_TRINAMIC
+  #if AXIS_IS_TMC(E1)
     stepperE1.push();
   #endif
-  #if E2_IS_TRINAMIC
+  #if AXIS_IS_TMC(E2)
     stepperE2.push();
   #endif
-  #if E3_IS_TRINAMIC
+  #if AXIS_IS_TMC(E3)
     stepperE3.push();
   #endif
-  #if E4_IS_TRINAMIC
+  #if AXIS_IS_TMC(E4)
     stepperE4.push();
   #endif
 }
 
 void reset_stepper_drivers() {
-  #if ENABLED(HAVE_TMC26X)
+  #if HAS_DRIVER(TMC26X)
     tmc26x_init_to_defaults();
   #endif
-  #if ENABLED(HAVE_TMC2130)
+  #if HAS_DRIVER(TMC2130)
     delay(100);
     tmc2130_init_to_defaults();
   #endif
-  #if ENABLED(HAVE_TMC2208)
+  #if HAS_DRIVER(TMC2208)
     delay(100);
     tmc2208_init_to_defaults();
   #endif
   #ifdef TMC_ADV
     TMC_ADV()
   #endif
-  #if ENABLED(HAVE_L6470DRIVER)
+  #if HAS_DRIVER(L6470)
     L6470_init_to_defaults();
   #endif
 }
@@ -544,7 +544,7 @@ void reset_stepper_drivers() {
 //
 // L6470 Driver objects and inits
 //
-#if ENABLED(HAVE_L6470DRIVER)
+#if HAS_DRIVER(L6470)
 
   #include <SPI.h>
   #include <L6470.h>
@@ -552,37 +552,37 @@ void reset_stepper_drivers() {
   #define _L6470_DEFINE(ST) L6470 stepper##ST(ST##_ENABLE_PIN)
 
   // L6470 Stepper objects
-  #if ENABLED(X_IS_L6470)
+  #if AXIS_DRIVER_TYPE(X, L6470)
     _L6470_DEFINE(X);
   #endif
-  #if ENABLED(X2_IS_L6470)
+  #if AXIS_DRIVER_TYPE(X2, L6470)
     _L6470_DEFINE(X2);
   #endif
-  #if ENABLED(Y_IS_L6470)
+  #if AXIS_DRIVER_TYPE(Y, L6470)
     _L6470_DEFINE(Y);
   #endif
-  #if ENABLED(Y2_IS_L6470)
+  #if AXIS_DRIVER_TYPE(Y2, L6470)
     _L6470_DEFINE(Y2);
   #endif
-  #if ENABLED(Z_IS_L6470)
+  #if AXIS_DRIVER_TYPE(Z, L6470)
     _L6470_DEFINE(Z);
   #endif
-  #if ENABLED(Z2_IS_L6470)
+  #if AXIS_DRIVER_TYPE(Z2, L6470)
     _L6470_DEFINE(Z2);
   #endif
-  #if ENABLED(E0_IS_L6470)
+  #if AXIS_DRIVER_TYPE(E0, L6470)
     _L6470_DEFINE(E0);
   #endif
-  #if ENABLED(E1_IS_L6470)
+  #if AXIS_DRIVER_TYPE(E1, L6470)
     _L6470_DEFINE(E1);
   #endif
-  #if ENABLED(E2_IS_L6470)
+  #if AXIS_DRIVER_TYPE(E2, L6470)
     _L6470_DEFINE(E2);
   #endif
-  #if ENABLED(E3_IS_L6470)
+  #if AXIS_DRIVER_TYPE(E3, L6470)
     _L6470_DEFINE(E3);
   #endif
-  #if ENABLED(E4_IS_L6470)
+  #if AXIS_DRIVER_TYPE(E4, L6470)
     _L6470_DEFINE(E4);
   #endif
 
@@ -595,39 +595,39 @@ void reset_stepper_drivers() {
   }while(0)
 
   void L6470_init_to_defaults() {
-    #if ENABLED(X_IS_L6470)
+    #if AXIS_DRIVER_TYPE(X, L6470)
       _L6470_INIT(X);
     #endif
-    #if ENABLED(X2_IS_L6470)
+    #if AXIS_DRIVER_TYPE(X2, L6470)
       _L6470_INIT(X2);
     #endif
-    #if ENABLED(Y_IS_L6470)
+    #if AXIS_DRIVER_TYPE(Y, L6470)
       _L6470_INIT(Y);
     #endif
-    #if ENABLED(Y2_IS_L6470)
+    #if AXIS_DRIVER_TYPE(Y2, L6470)
       _L6470_INIT(Y2);
     #endif
-    #if ENABLED(Z_IS_L6470)
+    #if AXIS_DRIVER_TYPE(Z, L6470)
       _L6470_INIT(Z);
     #endif
-    #if ENABLED(Z2_IS_L6470)
+    #if AXIS_DRIVER_TYPE(Z2, L6470)
       _L6470_INIT(Z2);
     #endif
-    #if ENABLED(E0_IS_L6470)
+    #if AXIS_DRIVER_TYPE(E0, L6470)
       _L6470_INIT(E0);
     #endif
-    #if ENABLED(E1_IS_L6470)
+    #if AXIS_DRIVER_TYPE(E1, L6470)
       _L6470_INIT(E1);
     #endif
-    #if ENABLED(E2_IS_L6470)
+    #if AXIS_DRIVER_TYPE(E2, L6470)
       _L6470_INIT(E2);
     #endif
-    #if ENABLED(E3_IS_L6470)
+    #if AXIS_DRIVER_TYPE(E3, L6470)
       _L6470_INIT(E3);
     #endif
-    #if ENABLED(E4_IS_L6470)
+    #if AXIS_DRIVER_TYPE(E4, L6470)
       _L6470_INIT(E4);
     #endif
   }
 
-#endif // HAVE_L6470DRIVER
+#endif // L6470
diff --git a/Marlin/src/module/stepper_indirection.h b/Marlin/src/module/stepper_indirection.h
index 7b80a459bf..8ac4a0d8e9 100644
--- a/Marlin/src/module/stepper_indirection.h
+++ b/Marlin/src/module/stepper_indirection.h
@@ -47,7 +47,7 @@
 #include "../inc/MarlinConfig.h"
 
 // TMC26X drivers have STEP/DIR on normal pins, but ENABLE via SPI
-#if ENABLED(HAVE_TMC26X)
+#if HAS_DRIVER(TMC26X)
   #include <SPI.h>
   #ifdef STM32F7
     #include "../HAL/HAL_STM32F7/TMC2660.h"
@@ -57,19 +57,19 @@
   void tmc26x_init_to_defaults();
 #endif
 
-#if ENABLED(HAVE_TMC2130)
+#if HAS_DRIVER(TMC2130)
   #include <TMC2130Stepper.h>
   void tmc2130_init_to_defaults();
 #endif
 
-#if ENABLED(HAVE_TMC2208)
+#if HAS_DRIVER(TMC2208)
   #include <TMC2208Stepper.h>
   void tmc2208_serial_begin();
   void tmc2208_init_to_defaults();
 #endif
 
 // L6470 has STEP on normal pins, but DIR/ENABLE via SPI
-#if ENABLED(HAVE_L6470DRIVER)
+#if HAS_DRIVER(L6470)
   #include <SPI.h>
   #include <L6470.h>
   void L6470_init_to_defaults();
@@ -79,7 +79,7 @@ void restore_stepper_drivers();  // Called by PSU_ON
 void reset_stepper_drivers();    // Called by settings.load / settings.reset
 
 // X Stepper
-#if ENABLED(X_IS_L6470)
+#if AXIS_DRIVER_TYPE(X, L6470)
   extern L6470 stepperX;
   #define X_ENABLE_INIT NOOP
   #define X_ENABLE_WRITE(STATE) do{ if (STATE) stepperX.Step_Clock(stepperX.getStatus() & STATUS_HIZ); else stepperX.softFree(); }while(0)
@@ -88,15 +88,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #define X_DIR_WRITE(STATE) stepperX.Step_Clock(STATE)
   #define X_DIR_READ (stepperX.getStatus() & STATUS_DIR)
 #else
-  #if ENABLED(X_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(X, TMC26X)
     extern TMC26XStepper stepperX;
     #define X_ENABLE_INIT NOOP
     #define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE)
     #define X_ENABLE_READ stepperX.isEnabled()
   #else
-    #if ENABLED(X_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(X, TMC2130)
       extern TMC2130Stepper stepperX;
-    #elif ENABLED(X_IS_TMC2208)
+    #elif AXIS_DRIVER_TYPE(X, TMC2208)
       extern TMC2208Stepper stepperX;
     #endif
     #define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN)
@@ -112,7 +112,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 #define X_STEP_READ READ(X_STEP_PIN)
 
 // Y Stepper
-#if ENABLED(Y_IS_L6470)
+#if AXIS_DRIVER_TYPE(Y, L6470)
   extern L6470 stepperY;
   #define Y_ENABLE_INIT NOOP
   #define Y_ENABLE_WRITE(STATE) do{ if (STATE) stepperY.Step_Clock(stepperY.getStatus() & STATUS_HIZ); else stepperY.softFree(); }while(0)
@@ -121,15 +121,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #define Y_DIR_WRITE(STATE) stepperY.Step_Clock(STATE)
   #define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR)
 #else
-  #if ENABLED(Y_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(Y, TMC26X)
     extern TMC26XStepper stepperY;
     #define Y_ENABLE_INIT NOOP
     #define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE)
     #define Y_ENABLE_READ stepperY.isEnabled()
   #else
-    #if ENABLED(Y_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Y, TMC2130)
       extern TMC2130Stepper stepperY;
-    #elif ENABLED(Y_IS_TMC2208)
+    #elif AXIS_DRIVER_TYPE(Y, TMC2208)
       extern TMC2208Stepper stepperY;
     #endif
     #define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN)
@@ -145,7 +145,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 #define Y_STEP_READ READ(Y_STEP_PIN)
 
 // Z Stepper
-#if ENABLED(Z_IS_L6470)
+#if AXIS_DRIVER_TYPE(Z, L6470)
   extern L6470 stepperZ;
   #define Z_ENABLE_INIT NOOP
   #define Z_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ.Step_Clock(stepperZ.getStatus() & STATUS_HIZ); else stepperZ.softFree(); }while(0)
@@ -154,15 +154,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #define Z_DIR_WRITE(STATE) stepperZ.Step_Clock(STATE)
   #define Z_DIR_READ (stepperZ.getStatus() & STATUS_DIR)
 #else
-  #if ENABLED(Z_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(Z, TMC26X)
     extern TMC26XStepper stepperZ;
     #define Z_ENABLE_INIT NOOP
     #define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE)
     #define Z_ENABLE_READ stepperZ.isEnabled()
   #else
-    #if ENABLED(Z_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(Z, TMC2130)
       extern TMC2130Stepper stepperZ;
-    #elif ENABLED(Z_IS_TMC2208)
+    #elif AXIS_DRIVER_TYPE(Z, TMC2208)
       extern TMC2208Stepper stepperZ;
     #endif
     #define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN)
@@ -179,7 +179,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 
 // X2 Stepper
 #if HAS_X2_ENABLE
-  #if ENABLED(X2_IS_L6470)
+  #if AXIS_DRIVER_TYPE(X2, L6470)
     extern L6470 stepperX2;
     #define X2_ENABLE_INIT NOOP
     #define X2_ENABLE_WRITE(STATE) do{ if (STATE) stepperX2.Step_Clock(stepperX2.getStatus() & STATUS_HIZ); else stepperX2.softFree(); }while(0)
@@ -188,15 +188,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
     #define X2_DIR_WRITE(STATE) stepperX2.Step_Clock(STATE)
     #define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR)
   #else
-    #if ENABLED(X2_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(X2, TMC26X)
       extern TMC26XStepper stepperX2;
       #define X2_ENABLE_INIT NOOP
       #define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE)
       #define X2_ENABLE_READ stepperX2.isEnabled()
     #else
-      #if ENABLED(X2_IS_TMC2130)
+      #if AXIS_DRIVER_TYPE(X2, TMC2130)
         extern TMC2130Stepper stepperX2;
-      #elif ENABLED(X2_IS_TMC2208)
+      #elif AXIS_DRIVER_TYPE(X2, TMC2208)
         extern TMC2208Stepper stepperX2;
       #endif
       #define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN)
@@ -214,7 +214,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 
 // Y2 Stepper
 #if HAS_Y2_ENABLE
-  #if ENABLED(Y2_IS_L6470)
+  #if AXIS_DRIVER_TYPE(Y2, L6470)
     extern L6470 stepperY2;
     #define Y2_ENABLE_INIT NOOP
     #define Y2_ENABLE_WRITE(STATE) do{ if (STATE) stepperY2.Step_Clock(stepperY2.getStatus() & STATUS_HIZ); else stepperY2.softFree(); }while(0)
@@ -223,15 +223,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
     #define Y2_DIR_WRITE(STATE) stepperY2.Step_Clock(STATE)
     #define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR)
   #else
-    #if ENABLED(Y2_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(Y2, TMC26X)
       extern TMC26XStepper stepperY2;
       #define Y2_ENABLE_INIT NOOP
       #define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE)
       #define Y2_ENABLE_READ stepperY2.isEnabled()
     #else
-      #if ENABLED(Y2_IS_TMC2130)
+      #if AXIS_DRIVER_TYPE(Y2, TMC2130)
         extern TMC2130Stepper stepperY2;
-      #elif ENABLED(Y2_IS_TMC2208)
+      #elif AXIS_DRIVER_TYPE(Y2, TMC2208)
         extern TMC2208Stepper stepperY2;
       #endif
       #define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN)
@@ -249,7 +249,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 
 // Z2 Stepper
 #if HAS_Z2_ENABLE
-  #if ENABLED(Z2_IS_L6470)
+  #if AXIS_DRIVER_TYPE(Z2, L6470)
     extern L6470 stepperZ2;
     #define Z2_ENABLE_INIT NOOP
     #define Z2_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ2.Step_Clock(stepperZ2.getStatus() & STATUS_HIZ); else stepperZ2.softFree(); }while(0)
@@ -258,15 +258,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
     #define Z2_DIR_WRITE(STATE) stepperZ2.Step_Clock(STATE)
     #define Z2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR)
   #else
-    #if ENABLED(Z2_IS_TMC26X)
+    #if AXIS_DRIVER_TYPE(Z2, TMC26X)
       extern TMC26XStepper stepperZ2;
       #define Z2_ENABLE_INIT NOOP
       #define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE)
       #define Z2_ENABLE_READ stepperZ2.isEnabled()
     #else
-      #if ENABLED(Z2_IS_TMC2130)
+      #if AXIS_DRIVER_TYPE(Z2, TMC2130)
         extern TMC2130Stepper stepperZ2;
-      #elif ENABLED(Z2_IS_TMC2208)
+      #elif AXIS_DRIVER_TYPE(Z2, TMC2208)
         extern TMC2208Stepper stepperZ2;
       #endif
       #define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN)
@@ -283,7 +283,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 #endif
 
 // E0 Stepper
-#if ENABLED(E0_IS_L6470)
+#if AXIS_DRIVER_TYPE(E0, L6470)
   extern L6470 stepperE0;
   #define E0_ENABLE_INIT NOOP
   #define E0_ENABLE_WRITE(STATE) do{ if (STATE) stepperE0.Step_Clock(stepperE0.getStatus() & STATUS_HIZ); else stepperE0.softFree(); }while(0)
@@ -292,15 +292,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #define E0_DIR_WRITE(STATE) stepperE0.Step_Clock(STATE)
   #define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR)
 #else
-  #if ENABLED(E0_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E0, TMC26X)
     extern TMC26XStepper stepperE0;
     #define E0_ENABLE_INIT NOOP
     #define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE)
     #define E0_ENABLE_READ stepperE0.isEnabled()
   #else
-    #if ENABLED(E0_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E0, TMC2130)
       extern TMC2130Stepper stepperE0;
-    #elif ENABLED(E0_IS_TMC2208)
+    #elif AXIS_DRIVER_TYPE(E0, TMC2208)
       extern TMC2208Stepper stepperE0;
     #endif
     #define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN)
@@ -316,7 +316,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 #define E0_STEP_READ READ(E0_STEP_PIN)
 
 // E1 Stepper
-#if ENABLED(E1_IS_L6470)
+#if AXIS_DRIVER_TYPE(E1, L6470)
   extern L6470 stepperE1;
   #define E1_ENABLE_INIT NOOP
   #define E1_ENABLE_WRITE(STATE) do{ if (STATE) stepperE1.Step_Clock(stepperE1.getStatus() & STATUS_HIZ); else stepperE1.softFree(); }while(0)
@@ -325,15 +325,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #define E1_DIR_WRITE(STATE) stepperE1.Step_Clock(STATE)
   #define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR)
 #else
-  #if ENABLED(E1_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E1, TMC26X)
     extern TMC26XStepper stepperE1;
     #define E1_ENABLE_INIT NOOP
     #define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE)
     #define E1_ENABLE_READ stepperE1.isEnabled()
   #else
-    #if ENABLED(E1_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E1, TMC2130)
       extern TMC2130Stepper stepperE1;
-    #elif ENABLED(E1_IS_TMC2208)
+    #elif AXIS_DRIVER_TYPE(E1, TMC2208)
       extern TMC2208Stepper stepperE1;
     #endif
     #define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN)
@@ -349,7 +349,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 #define E1_STEP_READ READ(E1_STEP_PIN)
 
 // E2 Stepper
-#if ENABLED(E2_IS_L6470)
+#if AXIS_DRIVER_TYPE(E2, L6470)
   extern L6470 stepperE2;
   #define E2_ENABLE_INIT NOOP
   #define E2_ENABLE_WRITE(STATE) do{ if (STATE) stepperE2.Step_Clock(stepperE2.getStatus() & STATUS_HIZ); else stepperE2.softFree(); }while(0)
@@ -358,15 +358,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #define E2_DIR_WRITE(STATE) stepperE2.Step_Clock(STATE)
   #define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR)
 #else
-  #if ENABLED(E2_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E2, TMC26X)
     extern TMC26XStepper stepperE2;
     #define E2_ENABLE_INIT NOOP
     #define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE)
     #define E2_ENABLE_READ stepperE2.isEnabled()
   #else
-    #if ENABLED(E2_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E2, TMC2130)
       extern TMC2130Stepper stepperE2;
-    #elif ENABLED(E2_IS_TMC2208)
+    #elif AXIS_DRIVER_TYPE(E2, TMC2208)
       extern TMC2208Stepper stepperE2;
     #endif
     #define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN)
@@ -382,7 +382,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 #define E2_STEP_READ READ(E2_STEP_PIN)
 
 // E3 Stepper
-#if ENABLED(E3_IS_L6470)
+#if AXIS_DRIVER_TYPE(E3, L6470)
   extern L6470 stepperE3;
   #define E3_ENABLE_INIT NOOP
   #define E3_ENABLE_WRITE(STATE) do{ if (STATE) stepperE3.Step_Clock(stepperE3.getStatus() & STATUS_HIZ); else stepperE3.softFree(); }while(0)
@@ -391,15 +391,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #define E3_DIR_WRITE(STATE) stepperE3.Step_Clock(STATE)
   #define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR)
 #else
-  #if ENABLED(E3_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E3, TMC26X)
     extern TMC26XStepper stepperE3;
     #define E3_ENABLE_INIT NOOP
     #define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE)
     #define E3_ENABLE_READ stepperE3.isEnabled()
   #else
-    #if ENABLED(E3_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E3, TMC2130)
       extern TMC2130Stepper stepperE3;
-    #elif ENABLED(E3_IS_TMC2208)
+    #elif AXIS_DRIVER_TYPE(E3, TMC2208)
       extern TMC2208Stepper stepperE3;
     #endif
     #define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN)
@@ -415,7 +415,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 #define E3_STEP_READ READ(E3_STEP_PIN)
 
 // E4 Stepper
-#if ENABLED(E4_IS_L6470)
+#if AXIS_DRIVER_TYPE(E4, L6470)
   extern L6470 stepperE4;
   #define E4_ENABLE_INIT NOOP
   #define E4_ENABLE_WRITE(STATE) do{ if (STATE) stepperE4.Step_Clock(stepperE4.getStatus() & STATUS_HIZ); else stepperE4.softFree(); }while(0)
@@ -424,15 +424,15 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #define E4_DIR_WRITE(STATE) stepperE4.Step_Clock(STATE)
   #define E4_DIR_READ (stepperE4.getStatus() & STATUS_DIR)
 #else
-  #if ENABLED(E4_IS_TMC26X)
+  #if AXIS_DRIVER_TYPE(E4, TMC26X)
     extern TMC26XStepper stepperE4;
     #define E4_ENABLE_INIT NOOP
     #define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE)
     #define E4_ENABLE_READ stepperE4.isEnabled()
   #else
-    #if ENABLED(E4_IS_TMC2130)
+    #if AXIS_DRIVER_TYPE(E4, TMC2130)
       extern TMC2130Stepper stepperE4;
-    #elif ENABLED(E4_IS_TMC2208)
+    #elif AXIS_DRIVER_TYPE(E4, TMC2208)
       extern TMC2208Stepper stepperE4;
     #endif
     #define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN)
diff --git a/Marlin/src/pins/pins_EINSY_RAMBO.h b/Marlin/src/pins/pins_EINSY_RAMBO.h
index b3c1d1caa0..428dc047c8 100644
--- a/Marlin/src/pins/pins_EINSY_RAMBO.h
+++ b/Marlin/src/pins/pins_EINSY_RAMBO.h
@@ -33,10 +33,8 @@
 //
 // TMC2130 Configuration_adv defaults for EinsyRambo
 //
-#if DISABLED(HAVE_TMC2130)
-  #error "You must enable TMC2130 support in Configuration_adv.h for EinsyRambo."
-#elif DISABLED(X_IS_TMC2130) || DISABLED(Y_IS_TMC2130) || DISABLED(Z_IS_TMC2130) || DISABLED(E0_IS_TMC2130)
-  #error "You must enable ([XYZ]|E0)_IS_TMC2130 in Configuration_adv.h for EinsyRambo."
+#if !AXIS_DRIVER_TYPE(X, TMC2130) || !AXIS_DRIVER_TYPE(Y, TMC2130) || !AXIS_DRIVER_TYPE(Z, TMC2130) || !AXIS_DRIVER_TYPE(E0, TMC2130)
+  #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRambo."
 #endif
 
 // TMC2130 Diag Pins (currently just for reference)
diff --git a/Marlin/src/pins/pins_EINSY_RETRO.h b/Marlin/src/pins/pins_EINSY_RETRO.h
index df4f1c20be..a100d9329e 100644
--- a/Marlin/src/pins/pins_EINSY_RETRO.h
+++ b/Marlin/src/pins/pins_EINSY_RETRO.h
@@ -33,10 +33,8 @@
 //
 // TMC2130 Configuration_adv defaults for EinsyRetro
 //
-#if DISABLED(HAVE_TMC2130)
-  #error "You must enable TMC2130 support in Configuration_adv.h for EinsyRetro."
-#elif DISABLED(X_IS_TMC2130) || DISABLED(Y_IS_TMC2130) || DISABLED(Z_IS_TMC2130) || DISABLED(E0_IS_TMC2130)
-  #error "You must enable ([XYZ]|E0)_IS_TMC2130 in Configuration_adv.h for EinsyRetro."
+#if !AXIS_DRIVER_TYPE(X, TMC2130) || !AXIS_DRIVER_TYPE(Y, TMC2130) || !AXIS_DRIVER_TYPE(Z, TMC2130) || !AXIS_DRIVER_TYPE(E0, TMC2130)
+  #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRetro."
 #endif
 
 // TMC2130 Diag Pins (currently just for reference)
diff --git a/Marlin/src/pins/pins_RAMPS.h b/Marlin/src/pins/pins_RAMPS.h
index a85f3b6049..b8c6233da7 100644
--- a/Marlin/src/pins/pins_RAMPS.h
+++ b/Marlin/src/pins/pins_RAMPS.h
@@ -146,7 +146,7 @@
   #endif
 #endif
 
-#if ENABLED(HAVE_TMC2208)
+#if HAS_DRIVER(TMC2208)
   /**
    * TMC2208 stepper drivers
    *
diff --git a/Marlin/src/pins/pins_RAMPS_FD_V1.h b/Marlin/src/pins/pins_RAMPS_FD_V1.h
index d8cdeb54f9..b6266fab83 100644
--- a/Marlin/src/pins/pins_RAMPS_FD_V1.h
+++ b/Marlin/src/pins/pins_RAMPS_FD_V1.h
@@ -178,7 +178,7 @@
 
 #endif // ULTRA_LCD
 
-#if ENABLED(HAVE_TMC2208)
+#if HAS_DRIVER(TMC2208)
   /**
    * TMC2208 stepper drivers
    *
diff --git a/buildroot/share/tests/megaatmega2560_tests b/buildroot/share/tests/megaatmega2560_tests
index e13085594e..faf7cd0af0 100755
--- a/buildroot/share/tests/megaatmega2560_tests
+++ b/buildroot/share/tests/megaatmega2560_tests
@@ -287,14 +287,20 @@ exec_test $1 $2 "Delta Config (FLSUN AC because it's complex)"
 #
 use_example_configs SCARA
 opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
-opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130
+opt_set X_DRIVER_TYPE TMC2130
+opt_set Y_DRIVER_TYPE TMC2130
+opt_set Z_DRIVER_TYPE TMC2130
+opt_set E0_DRIVER_TYPE TMC2130
 opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
 exec_test $1 $2 "SCARA with TMC2130"
 #
 # TMC2208 Config
 #
 restore_configs
-opt_enable_adv HAVE_TMC2208 X_IS_TMC2208 Y_IS_TMC2208 Z_IS_TMC2208
+opt_set X_DRIVER_TYPE TMC2208
+opt_set Y_DRIVER_TYPE TMC2208
+opt_set Z_DRIVER_TYPE TMC2208
+opt_set E0_DRIVER_TYPE TMC2208
 opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
 exec_test $1 $2 "TMC2208 Config"
 #