From 349dafa728424ed2e65c8975bff134711fce9a1b Mon Sep 17 00:00:00 2001
From: Bob-the-Kuhn <bob.kuhn@att.net>
Date: Thu, 15 Feb 2018 17:45:20 -0600
Subject: [PATCH] config update (set to -1)

---
 Marlin/Configuration_adv.h                                      | 2 +-
 Marlin/src/config/default/Configuration_adv.h                   | 2 +-
 Marlin/src/config/examples/Anet/A6/Configuration_adv.h          | 2 +-
 Marlin/src/config/examples/Anet/A8/Configuration_adv.h          | 2 +-
 Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h      | 2 +-
 Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h      | 2 +-
 Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h     | 2 +-
 Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h   | 2 +-
 Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h        | 2 +-
 Marlin/src/config/examples/Cartesio/Configuration_adv.h         | 2 +-
 Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h   | 2 +-
 Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h  | 2 +-
 Marlin/src/config/examples/Creality/Ender/Configuration_adv.h   | 2 +-
 Marlin/src/config/examples/Felix/Configuration_adv.h            | 2 +-
 .../src/config/examples/FolgerTech/i3-2020/Configuration_adv.h  | 2 +-
 Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h | 2 +-
 Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h      | 2 +-
 Marlin/src/config/examples/MakerParts/Configuration_adv.h       | 2 +-
 Marlin/src/config/examples/Malyan/M150/Configuration_adv.h      | 2 +-
 Marlin/src/config/examples/Malyan/M200/Configuration_adv.h      | 2 +-
 .../config/examples/Micromake/C1/enhanced/Configuration_adv.h   | 2 +-
 Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h        | 2 +-
 Marlin/src/config/examples/SCARA/Configuration_adv.h            | 2 +-
 Marlin/src/config/examples/Sanguinololu/Configuration_adv.h     | 2 +-
 Marlin/src/config/examples/TheBorg/Configuration_adv.h          | 2 +-
 Marlin/src/config/examples/TinyBoy2/Configuration_adv.h         | 2 +-
 .../src/config/examples/UltiMachine/Archim2/Configuration_adv.h | 2 +-
 Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h   | 2 +-
 .../src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h | 2 +-
 .../examples/delta/FLSUN/auto_calibrate/Configuration_adv.h     | 2 +-
 .../src/config/examples/delta/FLSUN/kossel/Configuration_adv.h  | 2 +-
 .../config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h | 2 +-
 Marlin/src/config/examples/delta/generic/Configuration_adv.h    | 2 +-
 .../src/config/examples/delta/kossel_mini/Configuration_adv.h   | 2 +-
 Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h | 2 +-
 Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h  | 2 +-
 Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h | 2 +-
 Marlin/src/config/examples/makibox/Configuration_adv.h          | 2 +-
 Marlin/src/config/examples/wt150/Configuration_adv.h            | 2 +-
 39 files changed, 39 insertions(+), 39 deletions(-)

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 904a24867d..d74efa3306 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 904a24867d..d74efa3306 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index 7856d5bbb1..3312831c52 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 8f7f4500f0..33481688b8 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index fa54799675..721c99633b 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
index 1290e6f31a..6d8a9309e3 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 05fa86527d..b6f6cb9589 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 717b68bd44..47b4e8d31a 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 05fa86527d..b6f6cb9589 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index f790b7ba3d..bc018543a0 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index a86afcb612..b039009a1f 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index bceb67b6e8..510f326c61 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
index 2606e18769..0952a2c8b7 100644
--- a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index bac8540c04..04a60dca1d 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 0ed00612dd..3fe6086b7f 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 2f23568cfe..8c9bad66ba 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index 63054c0b7b..10e158ea9b 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 202a2c7bb9..251cc13aef 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index c31833e7ca..e8564fa5ce 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index ab6d32841c..d19f367523 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 8cfc1a3c93..ab49231600 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 63f0f853c5..9c427fc784 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 00dab604d4..5f535c7f27 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index f0d5a79f3a..dea3d7119e 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index 191805b8ef..b803b1331c 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 39231c8a39..83e268851d 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 1b9ce69384..0322af6624 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index fa8a289cd2..ce77395632 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -198,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index de44a51933..a3c278774e 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index cbdc089f62..fd147fd359 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 3bef770e6a..4c1ba83766 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 6939cde35a..6f781bc956 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 6939cde35a..6f781bc956 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 6939cde35a..6f781bc956 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index 0b41d19653..9b836c7239 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -190,7 +190,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index b91d40c603..2a5e39e8ba 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 73a71d2bf5..231a004207 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index acff5d82c6..e98699f924 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index ddd7a078c1..6bbb8be3a5 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif