mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2025-01-23 01:58:59 +00:00
✨ Sovol v1.3.1 (Sovol SV06) (#25267)
This commit is contained in:
Michael Hill
Scott Lahteine
parent
e50980e32b
commit
5c3dd467c7
7 changed files with 275 additions and 0 deletions
|
|
@ -381,6 +381,7 @@
|
|||
#define BOARD_ZONESTAR_ZM3E4V2 5064 // Zonestar ZM3E4 V2 (STM32F103VC)
|
||||
#define BOARD_ERYONE_ERY32_MINI 5065 // Eryone Ery32 mini (STM32F103VE)
|
||||
#define BOARD_PANDA_PI_V29 5066 // Panda Pi V2.9 - Standalone (STM32F103RC)
|
||||
#define BOARD_SOVOL_V131 5067 // Sovol V1.3.1 (GD32F103RET6)
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
|
|
|||
|
|
@ -777,6 +777,13 @@
|
|||
#warning "Define MK3_FAN_PINS to swap hotend and part cooling fan pins. (Define NO_MK3_FAN_PINS_WARNING to suppress this warning.)"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* GD32 is not exactly like STM32
|
||||
*/
|
||||
#if MB(SOVOL_V131)
|
||||
#warning "GD32 based controllers may not be fully compatible with Maple Generic STM32F103RE. Please report any issues."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* BD Sensor should always include BABYSTEPPING
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -627,6 +627,8 @@
|
|||
#include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F103VET6 env:ERYONE_ERY32_MINI_maple
|
||||
#elif MB(PANDA_PI_V29)
|
||||
#include "stm32f1/pins_PANDA_PI_V29.h" // STM32F103RCT6 env:PANDA_PI_V29
|
||||
#elif MB(SOVOL_V131)
|
||||
#include "stm32f1/pins_SOVOL_V131.h" // GD32F1 env:GD32F103RET6_sovol_maple
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
|
|
|||
|
|
@ -53,6 +53,7 @@
|
|||
#if NO_EEPROM_SELECTED
|
||||
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
|
||||
//#define SDCARD_EEPROM_EMULATION
|
||||
#undef NO_EEPROM_SELECTED
|
||||
#endif
|
||||
|
||||
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||
|
|
|
|||
236
Marlin/src/pins/stm32f1/pins_SOVOL_V131.h
Normal file
236
Marlin/src/pins/stm32f1/pins_SOVOL_V131.h
Normal file
|
|
@ -0,0 +1,236 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Sovol 1.3.1 (GD32F103RET6) board pin assignments
|
||||
*/
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "SOVOL V131 only supports 1 hotend / E-stepper."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "Sovol V131"
|
||||
#endif
|
||||
#ifndef DEFAULT_MACHINE_NAME
|
||||
#define DEFAULT_MACHINE_NAME "Sovol SV06"
|
||||
#endif
|
||||
|
||||
//#define BOARD_NO_NATIVE_USB
|
||||
|
||||
//
|
||||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
||||
//
|
||||
#ifndef DISABLE_DEBUG
|
||||
#define DISABLE_DEBUG
|
||||
#endif
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
|
||||
//#define SDCARD_EEPROM_EMULATION
|
||||
#undef NO_EEPROM_SELECTED
|
||||
#endif
|
||||
|
||||
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||
#define IIC_EEPROM_SDA PA11
|
||||
#define IIC_EEPROM_SCL PA12
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2K (24C16)
|
||||
#elif ENABLED(SDCARD_EEPROM_EMULATION)
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2K
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#ifndef SERVO0_PIN
|
||||
#ifndef HAS_PIN_27_BOARD
|
||||
#define SERVO0_PIN PB0 // BLTouch OUT
|
||||
#else
|
||||
#define SERVO0_PIN PC6
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#ifndef X_STOP_PIN
|
||||
#define X_STOP_PIN PA5
|
||||
#endif
|
||||
#ifndef Y_STOP_PIN
|
||||
#define Y_STOP_PIN PA6
|
||||
#endif
|
||||
#ifndef Z_STOP_PIN
|
||||
#define Z_STOP_PIN PA7
|
||||
#endif
|
||||
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN PB1 // BLTouch IN
|
||||
#endif
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PA4 // "Pulled-high"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#ifndef X_STEP_PIN
|
||||
#define X_STEP_PIN PC2
|
||||
#endif
|
||||
#ifndef X_DIR_PIN
|
||||
#define X_DIR_PIN PB9
|
||||
#endif
|
||||
#define X_ENABLE_PIN PC3 // Shared
|
||||
|
||||
#ifndef Y_STEP_PIN
|
||||
#define Y_STEP_PIN PB8
|
||||
#endif
|
||||
#ifndef Y_DIR_PIN
|
||||
#define Y_DIR_PIN PB7
|
||||
#endif
|
||||
#define Y_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#ifndef Z_STEP_PIN
|
||||
#define Z_STEP_PIN PB6
|
||||
#endif
|
||||
#ifndef Z_DIR_PIN
|
||||
#define Z_DIR_PIN PB5
|
||||
#endif
|
||||
#define Z_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#ifndef E0_STEP_PIN
|
||||
#define E0_STEP_PIN PB4
|
||||
#endif
|
||||
#ifndef E0_DIR_PIN
|
||||
#define E0_DIR_PIN PB3
|
||||
#endif
|
||||
#define E0_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#if HAS_TMC_UART
|
||||
|
||||
/**
|
||||
* TMC2208/TMC2209 stepper drivers
|
||||
*
|
||||
* Hardware serial communication ports.
|
||||
* If undefined software serial is used according to the pins below
|
||||
*/
|
||||
|
||||
#define X_SERIAL_TX_PIN PC1
|
||||
#define X_SERIAL_RX_PIN PC1
|
||||
|
||||
#define Y_SERIAL_TX_PIN PC0
|
||||
#define Y_SERIAL_RX_PIN PC0
|
||||
|
||||
#define Z_SERIAL_TX_PIN PA15
|
||||
#define Z_SERIAL_RX_PIN PA15
|
||||
|
||||
#define E0_SERIAL_TX_PIN PC14
|
||||
#define E0_SERIAL_RX_PIN PC14
|
||||
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
|
||||
#endif // HAS_TMC_UART
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC5 // TH1
|
||||
#define TEMP_BED_PIN PC4 // TB1
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#ifndef HEATER_0_PIN
|
||||
#define HEATER_0_PIN PA1 // HEATER1
|
||||
#endif
|
||||
#ifndef HEATER_BED_PIN
|
||||
#define HEATER_BED_PIN PA2 // HOT BED
|
||||
#endif
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN PA0 // FAN
|
||||
#endif
|
||||
#define FAN_SOFT_PWM_REQUIRED
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SD_DETECT_PIN PC7
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#define ONBOARD_SPI_DEVICE 1
|
||||
#define ONBOARD_SD_CS_PIN PA4 // SDSS
|
||||
#define SDIO_SUPPORT
|
||||
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
|
||||
|
||||
#if ANY(RET6_12864_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
|
||||
/**
|
||||
* RET6 12864 LCD
|
||||
* ------
|
||||
* PC6 | 1 2 | PB2
|
||||
* PB10 | 3 4 | PB11
|
||||
* PB14 5 6 | PB13
|
||||
* PB12 | 7 8 | PB15
|
||||
* GND | 9 10 | 5V
|
||||
* ------
|
||||
*/
|
||||
#define EXP3_01_PIN PC6
|
||||
#define EXP3_02_PIN PB2
|
||||
#define EXP3_03_PIN PB10
|
||||
#define EXP3_04_PIN PB11
|
||||
#define EXP3_05_PIN PB14
|
||||
#define EXP3_06_PIN PB13
|
||||
#define EXP3_07_PIN PB12
|
||||
#define EXP3_08_PIN PB15
|
||||
#endif
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
|
||||
#if ENABLED(RET6_12864_LCD)
|
||||
|
||||
#define LCD_PINS_RS EXP3_07_PIN
|
||||
#define LCD_PINS_ENABLE EXP3_08_PIN
|
||||
#define LCD_PINS_D4 EXP3_06_PIN
|
||||
|
||||
#define BTN_ENC EXP3_02_PIN
|
||||
#define BTN_EN1 EXP3_03_PIN
|
||||
#define BTN_EN2 EXP3_05_PIN
|
||||
|
||||
#ifndef HAS_PIN_27_BOARD
|
||||
#define BEEPER_PIN EXP3_01_PIN
|
||||
#endif
|
||||
|
||||
#else
|
||||
|
||||
#error "Only the RET6_12864_LCD variant of CR10_STOCKDISPLAY is supported."
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
14
buildroot/share/PlatformIO/ldscripts/sovol.ld
Normal file
14
buildroot/share/PlatformIO/ldscripts/sovol.ld
Normal file
|
|
@ -0,0 +1,14 @@
|
|||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40
|
||||
rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 28K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
|
|
@ -392,3 +392,17 @@ board_build.variant = MARLIN_F103Vx
|
|||
board_build.ldscript = eryone_ery32_mini.ld
|
||||
board_build.address = 0x08004000
|
||||
build_unflags = ${STM32F1_maple.build_unflags}
|
||||
|
||||
#
|
||||
# Sovol (GD32F103RET6)
|
||||
#
|
||||
[env:GD32F103RET6_sovol_maple]
|
||||
extends = env:STM32F103RE_maple
|
||||
build_flags = ${STM32F1_maple.build_flags} -DTEMP_TIMER_CHAN=4
|
||||
board_build.address = 0x08007000
|
||||
board_build.ldscript = sovol.ld
|
||||
extra_scripts = ${STM32F1_maple.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/random-bin.py
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
|
|
|
|||
Loading…
Reference in a new issue