From 5e38d706978cdc93e25540d91dd48642bd6490f1 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 8 Apr 2019 18:17:14 -0500 Subject: [PATCH] Fix M217 report label, general cleanup --- Marlin/src/gcode/config/M217.cpp | 2 +- config/examples/BQ/Hephestos_2/Configuration.h | 8 ++++---- .../examples/delta/Geeetech/Rostock 301/Configuration.h | 3 --- 3 files changed, 5 insertions(+), 8 deletions(-) diff --git a/Marlin/src/gcode/config/M217.cpp b/Marlin/src/gcode/config/M217.cpp index 31271ba2ca..89ae9b6eeb 100644 --- a/Marlin/src/gcode/config/M217.cpp +++ b/Marlin/src/gcode/config/M217.cpp @@ -30,7 +30,7 @@ void M217_report(const bool eeprom=false) { #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - serialprintPGM(eeprom ? PSTR(" M217") : PSTR("Singlenozzle:")); + serialprintPGM(eeprom ? PSTR(" M217") : PSTR("Toolchange:")); SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length)); SERIAL_ECHOPAIR(" P", LINEAR_UNIT(toolchange_settings.prime_speed)); SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed)); diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 73e7b67f5d..7416653284 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -903,12 +903,12 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 61fe789d37..f080006ce5 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1116,9 +1116,6 @@ #define Y_MAX_POS DELTA_PRINTABLE_RADIUS #define Z_MAX_POS MANUAL_Z_HOME_POS -// Z raise distance for tool-change, as needed for some extruders -#define TOOLCHANGE_ZRAISE 2 // (mm) - /** * Software Endstops *