diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index 8e2b2d6b917..462af7f61a3 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -256,7 +256,11 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
#endif
#if HAS_HOTEND
- hotend_info_t Temperature::temp_hotend[HOTEND_TEMPS]; // = { 0 }
+ hotend_info_t Temperature::temp_hotend[HOTENDS];
+ #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
+ temp_info_t Temperature::temp_redundant;
+ #endif
+ #define _HMT(N) HEATER_##N##_MAXTEMP,
const celsius_t Temperature::hotend_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
#endif
@@ -420,11 +424,6 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
bool Temperature::inited = false;
#endif
-#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
- int16_t Temperature::redundant_temperature_raw = 0;
- celsius_float_t Temperature::redundant_temperature = 0.0;
-#endif
-
volatile bool Temperature::raw_temps_ready = false;
#if ENABLED(PID_EXTRUSION_SCALING)
@@ -1225,12 +1224,12 @@ void Temperature::manage_heater() {
#if DISABLED(IGNORE_THERMOCOUPLE_ERRORS)
#if TEMP_SENSOR_0_IS_MAX_TC
- if (temp_hotend[0].celsius > _MIN(HEATER_0_MAXTEMP, TEMP_SENSOR_0_MAX_TC_TMAX - 1.0)) max_temp_error(H_E0);
- if (temp_hotend[0].celsius < _MAX(HEATER_0_MINTEMP, TEMP_SENSOR_0_MAX_TC_TMIN + .01)) min_temp_error(H_E0);
+ if (degHotend(0) > _MIN(HEATER_0_MAXTEMP, TEMP_SENSOR_0_MAX_TC_TMAX - 1.0)) max_temp_error(H_E0);
+ if (degHotend(0) < _MAX(HEATER_0_MINTEMP, TEMP_SENSOR_0_MAX_TC_TMIN + .01)) min_temp_error(H_E0);
#endif
#if TEMP_SENSOR_1_IS_MAX_TC
- if (temp_hotend[1].celsius > _MIN(HEATER_1_MAXTEMP, TEMP_SENSOR_1_MAX_TC_TMAX - 1.0)) max_temp_error(H_E1);
- if (temp_hotend[1].celsius < _MAX(HEATER_1_MINTEMP, TEMP_SENSOR_1_MAX_TC_TMIN + .01)) min_temp_error(H_E1);
+ if (TERN(TEMP_SENSOR_1_AS_REDUNDANT, degHotendRedundant(), degHotend(1)) > _MIN(HEATER_1_MAXTEMP, TEMP_SENSOR_1_MAX_TC_TMAX - 1.0)) max_temp_error(H_E1);
+ if (TERN(TEMP_SENSOR_1_AS_REDUNDANT, degHotendRedundant(), degHotend(1)) < _MAX(HEATER_1_MINTEMP, TEMP_SENSOR_1_MAX_TC_TMIN + .01)) min_temp_error(H_E1);
#endif
#endif
@@ -1266,7 +1265,7 @@ void Temperature::manage_heater() {
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
// Make sure measured temperatures are close together
- if (ABS(temp_hotend[0].celsius - redundant_temperature) > MAX_REDUNDANT_TEMP_SENSOR_DIFF)
+ if (ABS(degHotend(0) - degHotendRedundant()) > MAX_REDUNDANT_TEMP_SENSOR_DIFF)
_temp_error(H_E0, PSTR(STR_REDUNDANCY), GET_TEXT(MSG_ERR_REDUNDANT_TEMP));
#endif
@@ -1668,7 +1667,7 @@ void Temperature::manage_heater() {
SERIAL_EOL();
}
- celsius_float_t Temperature::user_thermistor_to_deg_c(const uint8_t t_index, const int raw) {
+ celsius_float_t Temperature::user_thermistor_to_deg_c(const uint8_t t_index, const int16_t raw) {
//#if (MOTHERBOARD == BOARD_RAMPS_14_EFB)
// static uint32_t clocks_total = 0;
// static uint32_t calls = 0;
@@ -1717,8 +1716,8 @@ void Temperature::manage_heater() {
#if HAS_HOTEND
// Derived from RepRap FiveD extruder::getTemperature()
// For hot end temperature measurement.
- celsius_float_t Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
- if (e > HOTENDS - DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)) {
+ celsius_float_t Temperature::analog_to_celsius_hotend(const int16_t raw, const uint8_t e) {
+ if (e >= HOTENDS + ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)) {
SERIAL_ERROR_START();
SERIAL_ECHO(e);
SERIAL_ECHOLNPGM(STR_INVALID_EXTRUDER_NUM);
@@ -1826,7 +1825,7 @@ void Temperature::manage_heater() {
#if HAS_HEATED_BED
// For bed temperature measurement.
- celsius_float_t Temperature::analog_to_celsius_bed(const int raw) {
+ celsius_float_t Temperature::analog_to_celsius_bed(const int16_t raw) {
#if TEMP_SENSOR_BED_IS_CUSTOM
return user_thermistor_to_deg_c(CTI_BED, raw);
#elif TEMP_SENSOR_BED_IS_THERMISTOR
@@ -1844,7 +1843,7 @@ void Temperature::manage_heater() {
#if HAS_TEMP_CHAMBER
// For chamber temperature measurement.
- celsius_float_t Temperature::analog_to_celsius_chamber(const int raw) {
+ celsius_float_t Temperature::analog_to_celsius_chamber(const int16_t raw) {
#if TEMP_SENSOR_CHAMBER_IS_CUSTOM
return user_thermistor_to_deg_c(CTI_CHAMBER, raw);
#elif TEMP_SENSOR_CHAMBER_IS_THERMISTOR
@@ -1862,7 +1861,7 @@ void Temperature::manage_heater() {
#if HAS_TEMP_COOLER
// For cooler temperature measurement.
- celsius_float_t Temperature::analog_to_celsius_cooler(const int raw) {
+ celsius_float_t Temperature::analog_to_celsius_cooler(const int16_t raw) {
#if TEMP_SENSOR_COOLER_IS_CUSTOM
return user_thermistor_to_deg_c(CTI_COOLER, raw);
#elif TEMP_SENSOR_COOLER_IS_THERMISTOR
@@ -1880,7 +1879,7 @@ void Temperature::manage_heater() {
#if HAS_TEMP_PROBE
// For probe temperature measurement.
- celsius_float_t Temperature::analog_to_celsius_probe(const int raw) {
+ celsius_float_t Temperature::analog_to_celsius_probe(const int16_t raw) {
#if TEMP_SENSOR_PROBE_IS_CUSTOM
return user_thermistor_to_deg_c(CTI_PROBE, raw);
#elif TEMP_SENSOR_PROBE_IS_THERMISTOR
@@ -1904,15 +1903,15 @@ void Temperature::manage_heater() {
*/
void Temperature::updateTemperaturesFromRawValues() {
TERN_(TEMP_SENSOR_0_IS_MAX_TC, temp_hotend[0].raw = READ_MAX_TC(0));
- TERN_(TEMP_SENSOR_1_IS_MAX_TC, temp_hotend[1].raw = READ_MAX_TC(1));
+ TERN_(TEMP_SENSOR_1_IS_MAX_TC, TERN(TEMP_SENSOR_1_AS_REDUNDANT, temp_redundant, temp_hotend[1]).raw = READ_MAX_TC(1));
#if HAS_HOTEND
HOTEND_LOOP() temp_hotend[e].celsius = analog_to_celsius_hotend(temp_hotend[e].raw, e);
#endif
+ TERN_(TEMP_SENSOR_1_AS_REDUNDANT, temp_redundant.celsius = analog_to_celsius_hotend(temp_redundant.raw, 1));
TERN_(HAS_HEATED_BED, temp_bed.celsius = analog_to_celsius_bed(temp_bed.raw));
TERN_(HAS_TEMP_CHAMBER, temp_chamber.celsius = analog_to_celsius_chamber(temp_chamber.raw));
TERN_(HAS_TEMP_COOLER, temp_cooler.celsius = analog_to_celsius_cooler(temp_cooler.raw));
TERN_(HAS_TEMP_PROBE, temp_probe.celsius = analog_to_celsius_probe(temp_probe.raw));
- TERN_(TEMP_SENSOR_1_AS_REDUNDANT, redundant_temperature = analog_to_celsius_hotend(redundant_temperature_raw, 1));
TERN_(FILAMENT_WIDTH_SENSOR, filwidth.update_measured_mm());
TERN_(HAS_POWER_MONITOR, power_monitor.capture_values());
@@ -2707,7 +2706,7 @@ void Temperature::update_raw_temperatures() {
#if HAS_TEMP_ADC_1
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
- redundant_temperature_raw = temp_hotend[1].acc;
+ temp_redundant.update();
#elif !TEMP_SENSOR_1_IS_MAX_TC
temp_hotend[1].update();
#endif
@@ -2741,7 +2740,7 @@ void Temperature::readings_ready() {
#if HAS_HOTEND
HOTEND_LOOP() temp_hotend[e].reset();
- TERN_(TEMP_SENSOR_1_AS_REDUNDANT, temp_hotend[1].reset());
+ TERN_(TEMP_SENSOR_1_AS_REDUNDANT, temp_redundant.reset());
#endif
TERN_(HAS_HEATED_BED, temp_bed.reset());
@@ -3245,7 +3244,7 @@ void Temperature::isr() {
#if HAS_TEMP_ADC_1
case PrepareTemp_1: HAL_START_ADC(TEMP_1_PIN); break;
- case MeasureTemp_1: ACCUMULATE_ADC(temp_hotend[1]); break;
+ case MeasureTemp_1: ACCUMULATE_ADC(TERN(TEMP_SENSOR_1_AS_REDUNDANT, temp_redundant, temp_hotend[1])); break;
#endif
#if HAS_TEMP_ADC_2
@@ -3443,9 +3442,9 @@ void Temperature::isr() {
#endif
);
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
- if (include_r) print_heater_state(redundant_temperature, degTargetHotend(target_extruder)
+ if (include_r) print_heater_state(degHotendRedundant(), degTargetHotend(0)
#if ENABLED(SHOW_TEMP_ADC_VALUES)
- , redundant_temperature_raw
+ , rawHotendTempRedundant()
#endif
, H_REDUNDANT
);
diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h
index b7d52e8a089..2bb773f805d 100644
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@@ -321,8 +321,10 @@ class Temperature {
public:
#if HAS_HOTEND
- #define HOTEND_TEMPS (HOTENDS + ENABLED(TEMP_SENSOR_1_AS_REDUNDANT))
- static hotend_info_t temp_hotend[HOTEND_TEMPS];
+ #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
+ static temp_info_t temp_redundant;
+ #endif
+ static hotend_info_t temp_hotend[HOTENDS];
static const celsius_t hotend_maxtemp[HOTENDS];
static inline celsius_t hotend_max_target(const uint8_t e) { return hotend_maxtemp[e] - (HOTEND_OVERSHOOT); }
#endif
@@ -423,11 +425,6 @@ class Temperature {
static hotend_watch_t watch_hotend[HOTENDS];
#endif
- #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
- static uint16_t redundant_temperature_raw;
- static celsius_t redundant_temperature;
- #endif
-
#if ENABLED(PID_EXTRUSION_SCALING)
static int32_t last_e_position, lpq[LPQ_MAX_LEN];
static lpq_ptr_t lpq_ptr;
@@ -501,7 +498,7 @@ class Temperature {
static user_thermistor_t user_thermistor[USER_THERMISTORS];
static void log_user_thermistor(const uint8_t t_index, const bool eprom=false);
static void reset_user_thermistors();
- static celsius_float_t user_thermistor_to_deg_c(const uint8_t t_index, const int raw);
+ static celsius_float_t user_thermistor_to_deg_c(const uint8_t t_index, const int16_t raw);
static inline bool set_pull_up_res(int8_t t_index, float value) {
//if (!WITHIN(t_index, 0, USER_THERMISTORS - 1)) return false;
if (!WITHIN(value, 1, 1000000)) return false;
@@ -529,19 +526,19 @@ class Temperature {
#endif
#if HAS_HOTEND
- static celsius_float_t analog_to_celsius_hotend(const int raw, const uint8_t e);
+ static celsius_float_t analog_to_celsius_hotend(const int16_t raw, const uint8_t e);
#endif
#if HAS_HEATED_BED
- static celsius_float_t analog_to_celsius_bed(const int raw);
+ static celsius_float_t analog_to_celsius_bed(const int16_t raw);
#endif
#if HAS_TEMP_PROBE
- static celsius_float_t analog_to_celsius_probe(const int raw);
+ static celsius_float_t analog_to_celsius_probe(const int16_t raw);
#endif
#if HAS_TEMP_CHAMBER
- static celsius_float_t analog_to_celsius_chamber(const int raw);
+ static celsius_float_t analog_to_celsius_chamber(const int16_t raw);
#endif
#if HAS_TEMP_COOLER
- static celsius_float_t analog_to_celsius_cooler(const int raw);
+ static celsius_float_t analog_to_celsius_cooler(const int16_t raw);
#endif
#if HAS_FAN
@@ -631,6 +628,10 @@ class Temperature {
return TERN0(HAS_HOTEND, temp_hotend[HOTEND_INDEX].celsius);
}
+ #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
+ static inline celsius_float_t degHotendRedundant() { return temp_redundant.celsius; }
+ #endif
+
static inline celsius_t wholeDegHotend(const uint8_t E_NAME) {
return TERN0(HAS_HOTEND, static_cast<celsius_t>(temp_hotend[HOTEND_INDEX].celsius + 0.5f));
}
@@ -639,6 +640,9 @@ class Temperature {
static inline int16_t rawHotendTemp(const uint8_t E_NAME) {
return TERN0(HAS_HOTEND, temp_hotend[HOTEND_INDEX].raw);
}
+ #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
+ static inline int16_t rawHotendTempRedundant() { return temp_redundant.raw; }
+ #endif
#endif
static inline celsius_t degTargetHotend(const uint8_t E_NAME) {