From 602e14704bdde975b243c6e5f7c55a7f4b64f4b5 Mon Sep 17 00:00:00 2001 From: DerAndere <26200979+DerAndere1@users.noreply.github.com> Date: Mon, 4 Apr 2022 04:43:42 +0200 Subject: [PATCH] =?UTF-8?q?=F0=9F=9A=B8=20Better=20M350,=20M114=20with=20m?= =?UTF-8?q?ore=20axes=20(#23986)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Co-authored-by: Scott Lahteine --- Marlin/src/gcode/control/M350_M351.cpp | 18 ++- Marlin/src/gcode/feature/L6470/M906.cpp | 2 +- .../src/gcode/feature/digipot/M907-M910.cpp | 10 +- Marlin/src/gcode/feature/trinamic/M569.cpp | 2 +- Marlin/src/gcode/feature/trinamic/M919.cpp | 2 +- Marlin/src/gcode/motion/G5.cpp | 2 +- Marlin/src/module/stepper.cpp | 151 ++++++++++-------- 7 files changed, 103 insertions(+), 84 deletions(-) diff --git a/Marlin/src/gcode/control/M350_M351.cpp b/Marlin/src/gcode/control/M350_M351.cpp index e78d95af98..1e59865e9d 100644 --- a/Marlin/src/gcode/control/M350_M351.cpp +++ b/Marlin/src/gcode/control/M350_M351.cpp @@ -27,6 +27,13 @@ #include "../gcode.h" #include "../../module/stepper.h" +#if LINEAR_AXES == XYZ && EXTRUDERS >= 1 + #define HAS_M350_B_PARAM 1 // "5th axis" (after E0) for an original XYZEB setup. + #if AXIS_COLLISION('B') + #error "M350 parameter 'B' collision with axis name." + #endif +#endif + /** * M350: Set axis microstepping modes. S sets mode for all drivers. * @@ -35,27 +42,30 @@ void GcodeSuite::M350() { if (parser.seen('S')) LOOP_DISTINCT_AXES(i) stepper.microstep_mode(i, parser.value_byte()); LOOP_LOGICAL_AXES(i) if (parser.seenval(AXIS_CHAR(i))) stepper.microstep_mode(i, parser.value_byte()); - if (parser.seenval('B')) stepper.microstep_mode(E_AXIS + 1, parser.value_byte()); + TERN_(HAS_M350_B_PARAM, if (parser.seenval('B')) stepper.microstep_mode(E_AXIS + 1, parser.value_byte())); stepper.microstep_readings(); } /** * M351: Toggle MS1 MS2 pins directly with axis codes X Y Z . . . E [B] * S# determines MS1, MS2 or MS3, X# sets the pin high/low. + * + * Parameter 'B' sets "5th axis" (after E0) only for an original XYZEB setup. */ void GcodeSuite::M351() { + const int8_t bval = TERN(HAS_M350_B_PARAM, parser.byteval('B', -1), -1); UNUSED(bval); if (parser.seenval('S')) switch (parser.value_byte()) { case 1: LOOP_LOGICAL_AXES(i) if (parser.seenval(AXIS_CHAR(i))) stepper.microstep_ms(i, parser.value_byte(), -1, -1); - if (parser.seenval('B')) stepper.microstep_ms(4, parser.value_byte(), -1, -1); + TERN_(HAS_M350_B_PARAM, if (bval >= 0) stepper.microstep_ms(E_AXIS + 1, bval != 0, -1, -1)); break; case 2: LOOP_LOGICAL_AXES(i) if (parser.seenval(AXIS_CHAR(i))) stepper.microstep_ms(i, -1, parser.value_byte(), -1); - if (parser.seenval('B')) stepper.microstep_ms(4, -1, parser.value_byte(), -1); + TERN_(HAS_M350_B_PARAM, if (bval >= 0) stepper.microstep_ms(E_AXIS + 1, -1, bval != 0, -1)); break; case 3: LOOP_LOGICAL_AXES(i) if (parser.seenval(AXIS_CHAR(i))) stepper.microstep_ms(i, -1, -1, parser.value_byte()); - if (parser.seenval('B')) stepper.microstep_ms(4, -1, -1, parser.value_byte()); + TERN_(HAS_M350_B_PARAM, if (bval >= 0) stepper.microstep_ms(E_AXIS + 1, -1, -1, bval != 0)); break; } stepper.microstep_readings(); diff --git a/Marlin/src/gcode/feature/L6470/M906.cpp b/Marlin/src/gcode/feature/L6470/M906.cpp index a745b5117a..ee0211dbad 100644 --- a/Marlin/src/gcode/feature/L6470/M906.cpp +++ b/Marlin/src/gcode/feature/L6470/M906.cpp @@ -25,7 +25,7 @@ #if HAS_L64XX #if AXIS_COLLISION('I') - #error "M906 parameter collision with axis name." + #error "M906 parameter 'I' collision with axis name." #endif #include "../../gcode.h" diff --git a/Marlin/src/gcode/feature/digipot/M907-M910.cpp b/Marlin/src/gcode/feature/digipot/M907-M910.cpp index 7c0c8cdea5..bc5882e95d 100644 --- a/Marlin/src/gcode/feature/digipot/M907-M910.cpp +++ b/Marlin/src/gcode/feature/digipot/M907-M910.cpp @@ -52,7 +52,7 @@ void GcodeSuite::M907() { return M907_report(); if (parser.seenval('S')) LOOP_L_N(i, MOTOR_CURRENT_COUNT) stepper.set_digipot_current(i, parser.value_int()); - LOOP_LOGICAL_AXES(i) if (parser.seenval(IAXIS_CHAR(i))) stepper.set_digipot_current(i, parser.value_int()); // X Y Z (I J K) E (map to drivers according to DIGIPOT_CHANNELS. Default with NUM_AXES 3: map X Y Z E to X Y Z E0) + LOOP_LOGICAL_AXES(i) if (parser.seenval(IAXIS_CHAR(i))) stepper.set_digipot_current(i, parser.value_int()); // X Y Z (I J K) E (map to drivers according to DIGIPOT_CHANNELS. Default with LINEAR_AXES 3: map X Y Z E to X Y Z E0) // Additional extruders use B,C. // TODO: Change these parameters because 'E' is used and D should be reserved for debugging. B? #if E_STEPPERS >= 2 @@ -104,11 +104,11 @@ void GcodeSuite::M907() { #if HAS_MOTOR_CURRENT_I2C // this one uses actual amps in floating point if (parser.seenval('S')) LOOP_L_N(q, DIGIPOT_I2C_NUM_CHANNELS) digipot_i2c.set_current(q, parser.value_float()); - LOOP_LOGICAL_AXES(i) if (parser.seenval(IAXIS_CHAR(i))) digipot_i2c.set_current(i, parser.value_float()); // X Y Z (I J K) E (map to drivers according to pots adresses. Default with NUM_AXES 3 X Y Z E: map to X Y Z E0) + LOOP_LOGICAL_AXES(i) if (parser.seenval(IAXIS_CHAR(i))) digipot_i2c.set_current(i, parser.value_float()); // X Y Z (I J K) E (map to drivers according to pots adresses. Default with LINEAR_AXES 3 X Y Z E: map to X Y Z E0) // Additional extruders use B,C,D. // TODO: Change these parameters because 'E' is used and because 'D' should be reserved for debugging. B? #if E_STEPPERS >= 2 - for (uint8_t i = E_AXIS + 1; i < _MAX(DIGIPOT_I2C_NUM_CHANNELS, (NUM_AXES + 3)); i++) + for (uint8_t i = E_AXIS + 1; i < _MAX(DIGIPOT_I2C_NUM_CHANNELS, (LINEAR_AXES + 3)); i++) if (parser.seenval('B' + i - (E_AXIS + 1))) digipot_i2c.set_current(i, parser.value_float()); #endif #endif @@ -118,7 +118,7 @@ void GcodeSuite::M907() { const float dac_percent = parser.value_float(); LOOP_LOGICAL_AXES(i) stepper_dac.set_current_percent(i, dac_percent); } - LOOP_LOGICAL_AXES(i) if (parser.seenval(IAXIS_CHAR(i))) stepper_dac.set_current_percent(i, parser.value_float()); // X Y Z (I J K) E (map to drivers according to DAC_STEPPER_ORDER. Default with NUM_AXES 3: X Y Z E map to X Y Z E0) + LOOP_LOGICAL_AXES(i) if (parser.seenval(IAXIS_CHAR(i))) stepper_dac.set_current_percent(i, parser.value_float()); // X Y Z (I J K) E (map to drivers according to DAC_STEPPER_ORDER. Default with LINEAR_AXES 3: X Y Z E map to X Y Z E0) #endif } @@ -139,7 +139,7 @@ void GcodeSuite::M907() { SERIAL_ECHO(stepper.motor_current_setting[q]); } #if E_STEPPERS >= 2 - SERIAL_ECHOPGM_P(PSTR(" B"), stepper.motor_current_setting[E_AXIS + 1] // B (maps to E1 with NUM_AXES 3 according to DIGIPOT_CHANNELS) + SERIAL_ECHOPGM_P(PSTR(" B"), stepper.motor_current_setting[E_AXIS + 1] // B (maps to E1 with LINEAR_AXES 3 according to DIGIPOT_CHANNELS) #if E_STEPPERS >= 3 , PSTR(" C"), stepper.motor_current_setting[E_AXIS + 2] // C (mapping to E2 must be defined by DIGIPOT_CHANNELS) #endif diff --git a/Marlin/src/gcode/feature/trinamic/M569.cpp b/Marlin/src/gcode/feature/trinamic/M569.cpp index ca8e596062..ba4e439854 100644 --- a/Marlin/src/gcode/feature/trinamic/M569.cpp +++ b/Marlin/src/gcode/feature/trinamic/M569.cpp @@ -25,7 +25,7 @@ #if HAS_STEALTHCHOP #if AXIS_COLLISION('I') - #error "M569 parameter collision with axis name." + #error "M569 parameter 'I' collision with axis name." #endif #include "../../gcode.h" diff --git a/Marlin/src/gcode/feature/trinamic/M919.cpp b/Marlin/src/gcode/feature/trinamic/M919.cpp index 6f3dcf729a..fa349e7f16 100644 --- a/Marlin/src/gcode/feature/trinamic/M919.cpp +++ b/Marlin/src/gcode/feature/trinamic/M919.cpp @@ -25,7 +25,7 @@ #if HAS_TRINAMIC_CONFIG #if AXIS_COLLISION('I') - #error "M919 parameter collision with axis name." + #error "M919 parameter 'I' collision with axis name." #endif #include "../../gcode.h" diff --git a/Marlin/src/gcode/motion/G5.cpp b/Marlin/src/gcode/motion/G5.cpp index 316a59b650..c47f443d41 100644 --- a/Marlin/src/gcode/motion/G5.cpp +++ b/Marlin/src/gcode/motion/G5.cpp @@ -25,7 +25,7 @@ #if ENABLED(BEZIER_CURVE_SUPPORT) #if AXIS_COLLISION('I') || AXIS_COLLISION('J') - #error "G5 parameter collision with axis name." + #error "G5 parameter 'I' or 'J' collision with axis name." #endif #include "../../module/motion.h" diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index 13a7c19b40..3ed4259d2a 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -3485,7 +3485,7 @@ void Stepper::report_positions() { void Stepper::microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2, const int8_t ms3) { if (ms1 >= 0) switch (driver) { #if HAS_X_MS_PINS || HAS_X2_MS_PINS - case 0: + case X_AXIS: #if HAS_X_MS_PINS WRITE(X_MS1_PIN, ms1); #endif @@ -3495,7 +3495,7 @@ void Stepper::report_positions() { break; #endif #if HAS_Y_MS_PINS || HAS_Y2_MS_PINS - case 1: + case Y_AXIS: #if HAS_Y_MS_PINS WRITE(Y_MS1_PIN, ms1); #endif @@ -3505,7 +3505,7 @@ void Stepper::report_positions() { break; #endif #if HAS_SOME_Z_MS_PINS - case 2: + case Z_AXIS: #if HAS_Z_MS_PINS WRITE(Z_MS1_PIN, ms1); #endif @@ -3520,43 +3520,43 @@ void Stepper::report_positions() { #endif break; #endif - #if HAS_E0_MS_PINS - case 3: WRITE(E0_MS1_PIN, ms1); break; - #endif - #if HAS_E1_MS_PINS - case 4: WRITE(E1_MS1_PIN, ms1); break; - #endif - #if HAS_E2_MS_PINS - case 5: WRITE(E2_MS1_PIN, ms1); break; - #endif - #if HAS_E3_MS_PINS - case 6: WRITE(E3_MS1_PIN, ms1); break; - #endif - #if HAS_E4_MS_PINS - case 7: WRITE(E4_MS1_PIN, ms1); break; - #endif - #if HAS_E5_MS_PINS - case 8: WRITE(E5_MS1_PIN, ms1); break; - #endif - #if HAS_E6_MS_PINS - case 9: WRITE(E6_MS1_PIN, ms1); break; - #endif - #if HAS_E7_MS_PINS - case 10: WRITE(E7_MS1_PIN, ms1); break; - #endif #if HAS_I_MS_PINS - case 11: WRITE(I_MS1_PIN, ms1); break + case I_AXIS: WRITE(I_MS1_PIN, ms1); break #endif #if HAS_J_MS_PINS - case 12: WRITE(J_MS1_PIN, ms1); break + case J_AXIS: WRITE(J_MS1_PIN, ms1); break #endif #if HAS_K_MS_PINS - case 13: WRITE(K_MS1_PIN, ms1); break + case K_AXIS: WRITE(K_MS1_PIN, ms1); break + #endif + #if HAS_E0_MS_PINS + case E_AXIS: WRITE(E0_MS1_PIN, ms1); break; + #endif + #if HAS_E1_MS_PINS + case (E_AXIS + 1): WRITE(E1_MS1_PIN, ms1); break; + #endif + #if HAS_E2_MS_PINS + case (E_AXIS + 2): WRITE(E2_MS1_PIN, ms1); break; + #endif + #if HAS_E3_MS_PINS + case (E_AXIS + 3): WRITE(E3_MS1_PIN, ms1); break; + #endif + #if HAS_E4_MS_PINS + case (E_AXIS + 4): WRITE(E4_MS1_PIN, ms1); break; + #endif + #if HAS_E5_MS_PINS + case (E_AXIS + 5): WRITE(E5_MS1_PIN, ms1); break; + #endif + #if HAS_E6_MS_PINS + case (E_AXIS + 6): WRITE(E6_MS1_PIN, ms1); break; + #endif + #if HAS_E7_MS_PINS + case (E_AXIS + 7): WRITE(E7_MS1_PIN, ms1); break; #endif } if (ms2 >= 0) switch (driver) { #if HAS_X_MS_PINS || HAS_X2_MS_PINS - case 0: + case X_AXIS: #if HAS_X_MS_PINS WRITE(X_MS2_PIN, ms2); #endif @@ -3566,7 +3566,7 @@ void Stepper::report_positions() { break; #endif #if HAS_Y_MS_PINS || HAS_Y2_MS_PINS - case 1: + case Y_AXIS: #if HAS_Y_MS_PINS WRITE(Y_MS2_PIN, ms2); #endif @@ -3576,7 +3576,7 @@ void Stepper::report_positions() { break; #endif #if HAS_SOME_Z_MS_PINS - case 2: + case Z_AXIS: #if HAS_Z_MS_PINS WRITE(Z_MS2_PIN, ms2); #endif @@ -3591,43 +3591,43 @@ void Stepper::report_positions() { #endif break; #endif - #if HAS_E0_MS_PINS - case 3: WRITE(E0_MS2_PIN, ms2); break; - #endif - #if HAS_E1_MS_PINS - case 4: WRITE(E1_MS2_PIN, ms2); break; - #endif - #if HAS_E2_MS_PINS - case 5: WRITE(E2_MS2_PIN, ms2); break; - #endif - #if HAS_E3_MS_PINS - case 6: WRITE(E3_MS2_PIN, ms2); break; - #endif - #if HAS_E4_MS_PINS - case 7: WRITE(E4_MS2_PIN, ms2); break; - #endif - #if HAS_E5_MS_PINS - case 8: WRITE(E5_MS2_PIN, ms2); break; - #endif - #if HAS_E6_MS_PINS - case 9: WRITE(E6_MS2_PIN, ms2); break; - #endif - #if HAS_E7_MS_PINS - case 10: WRITE(E7_MS2_PIN, ms2); break; - #endif #if HAS_I_MS_PINS - case 11: WRITE(I_MS2_PIN, ms2); break + case I_AXIS: WRITE(I_MS2_PIN, ms2); break #endif #if HAS_J_MS_PINS - case 12: WRITE(J_MS2_PIN, ms2); break + case J_AXIS: WRITE(J_MS2_PIN, ms2); break #endif #if HAS_K_MS_PINS - case 13: WRITE(K_MS2_PIN, ms2); break + case K_AXIS: WRITE(K_MS2_PIN, ms2); break + #endif + #if HAS_E0_MS_PINS + case E_AXIS: WRITE(E0_MS2_PIN, ms2); break; + #endif + #if HAS_E1_MS_PINS + case (E_AXIS + 1): WRITE(E1_MS2_PIN, ms2); break; + #endif + #if HAS_E2_MS_PINS + case (E_AXIS + 2): WRITE(E2_MS2_PIN, ms2); break; + #endif + #if HAS_E3_MS_PINS + case (E_AXIS + 3): WRITE(E3_MS2_PIN, ms2); break; + #endif + #if HAS_E4_MS_PINS + case (E_AXIS + 4): WRITE(E4_MS2_PIN, ms2); break; + #endif + #if HAS_E5_MS_PINS + case (E_AXIS + 5): WRITE(E5_MS2_PIN, ms2); break; + #endif + #if HAS_E6_MS_PINS + case (E_AXIS + 6): WRITE(E6_MS2_PIN, ms2); break; + #endif + #if HAS_E7_MS_PINS + case (E_AXIS + 7): WRITE(E7_MS2_PIN, ms2); break; #endif } if (ms3 >= 0) switch (driver) { #if HAS_X_MS_PINS || HAS_X2_MS_PINS - case 0: + case X_AXIS: #if HAS_X_MS_PINS && PIN_EXISTS(X_MS3) WRITE(X_MS3_PIN, ms3); #endif @@ -3637,7 +3637,7 @@ void Stepper::report_positions() { break; #endif #if HAS_Y_MS_PINS || HAS_Y2_MS_PINS - case 1: + case Y_AXIS: #if HAS_Y_MS_PINS && PIN_EXISTS(Y_MS3) WRITE(Y_MS3_PIN, ms3); #endif @@ -3647,7 +3647,7 @@ void Stepper::report_positions() { break; #endif #if HAS_SOME_Z_MS_PINS - case 2: + case Z_AXIS: #if HAS_Z_MS_PINS && PIN_EXISTS(Z_MS3) WRITE(Z_MS3_PIN, ms3); #endif @@ -3662,29 +3662,38 @@ void Stepper::report_positions() { #endif break; #endif + #if HAS_I_MS_PINS + case I_AXIS: WRITE(I_MS3_PIN, ms3); break + #endif + #if HAS_J_MS_PINS + case J_AXIS: WRITE(J_MS3_PIN, ms3); break + #endif + #if HAS_K_MS_PINS + case K_AXIS: WRITE(K_MS3_PIN, ms3); break + #endif #if HAS_E0_MS_PINS && PIN_EXISTS(E0_MS3) - case 3: WRITE(E0_MS3_PIN, ms3); break; + case E_AXIS: WRITE(E0_MS3_PIN, ms3); break; #endif #if HAS_E1_MS_PINS && PIN_EXISTS(E1_MS3) - case 4: WRITE(E1_MS3_PIN, ms3); break; + case (E_AXIS + 1): WRITE(E1_MS3_PIN, ms3); break; #endif #if HAS_E2_MS_PINS && PIN_EXISTS(E2_MS3) - case 5: WRITE(E2_MS3_PIN, ms3); break; + case (E_AXIS + 2): WRITE(E2_MS3_PIN, ms3); break; #endif #if HAS_E3_MS_PINS && PIN_EXISTS(E3_MS3) - case 6: WRITE(E3_MS3_PIN, ms3); break; + case (E_AXIS + 3): WRITE(E3_MS3_PIN, ms3); break; #endif #if HAS_E4_MS_PINS && PIN_EXISTS(E4_MS3) - case 7: WRITE(E4_MS3_PIN, ms3); break; + case (E_AXIS + 4): WRITE(E4_MS3_PIN, ms3); break; #endif #if HAS_E5_MS_PINS && PIN_EXISTS(E5_MS3) - case 8: WRITE(E5_MS3_PIN, ms3); break; + case (E_AXIS + 5): WRITE(E5_MS3_PIN, ms3); break; #endif #if HAS_E6_MS_PINS && PIN_EXISTS(E6_MS3) - case 9: WRITE(E6_MS3_PIN, ms3); break; + case (E_AXIS + 6): WRITE(E6_MS3_PIN, ms3); break; #endif #if HAS_E7_MS_PINS && PIN_EXISTS(E7_MS3) - case 10: WRITE(E7_MS3_PIN, ms3); break; + case (E_AXIS + 7): WRITE(E7_MS3_PIN, ms3); break; #endif } }