From 637489ae17d9db53a920f1df574ac507ea116559 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 25 Jul 2018 18:16:33 -0500 Subject: [PATCH] Tweak some SoftPWM code --- Marlin/temperature.cpp | 97 +++++++++++++++--------------------------- 1 file changed, 35 insertions(+), 62 deletions(-) diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 5f2f69c513..94eebfb63a 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -260,19 +260,29 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; workKp = 0, workKi = 0, workKd = 0, max = 0, min = 10000; - #define HAS_TP_BED (ENABLED(THERMAL_PROTECTION_BED) && ENABLED(PIDTEMPBED)) - #if HAS_TP_BED && ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(PIDTEMP) - #define TV(B,H) (hotend < 0 ? (B) : (H)) - #elif HAS_TP_BED - #define TV(B,H) (B) + #if HAS_PID_FOR_BOTH + #define GHV(B,H) (hotend < 0 ? (B) : (H)) + #define SHV(S,B,H) if (hotend < 0) S##_bed = B; else S [hotend] = H; + #elif ENABLED(PIDTEMPBED) + #define GHV(B,H) B + #define SHV(S,B,H) (S##_bed = B) #else - #define TV(B,H) (H) + #define GHV(B,H) H + #define SHV(S,B,H) (S [hotend] = H) #endif #if WATCH_THE_BED || WATCH_HOTENDS - const uint16_t watch_temp_period = TV(WATCH_BED_TEMP_PERIOD, WATCH_TEMP_PERIOD); - const uint8_t watch_temp_increase = TV(WATCH_BED_TEMP_INCREASE, WATCH_TEMP_INCREASE); - const float watch_temp_target = target - float(watch_temp_increase + TV(TEMP_BED_HYSTERESIS, TEMP_HYSTERESIS) + 1); + #define HAS_TP_BED (ENABLED(THERMAL_PROTECTION_BED) && ENABLED(PIDTEMPBED)) + #if HAS_TP_BED && ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(PIDTEMP) + #define GTV(B,H) (hotend < 0 ? (B) : (H)) + #elif HAS_TP_BED + #define GTV(B,H) (B) + #else + #define GTV(B,H) (H) + #endif + const uint16_t watch_temp_period = GTV(WATCH_BED_TEMP_PERIOD, WATCH_TEMP_PERIOD); + const uint8_t watch_temp_increase = GTV(WATCH_BED_TEMP_INCREASE, WATCH_TEMP_INCREASE); + const float watch_temp_target = target - float(watch_temp_increase + GTV(TEMP_BED_HYSTERESIS, TEMP_HYSTERESIS) + 1); millis_t temp_change_ms = next_temp_ms + watch_temp_period * 1000UL; float next_watch_temp = 0.0; bool heated = false; @@ -302,16 +312,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; disable_all_heaters(); // switch off all heaters. - #if HAS_PID_FOR_BOTH - if (hotend < 0) - soft_pwm_amount_bed = bias = d = (MAX_BED_POWER) >> 1; - else - soft_pwm_amount[hotend] = bias = d = (PID_MAX) >> 1; - #elif ENABLED(PIDTEMP) - soft_pwm_amount[hotend] = bias = d = (PID_MAX) >> 1; - #else - soft_pwm_amount_bed = bias = d = (MAX_BED_POWER) >> 1; - #endif + SHV(soft_pwm_amount, bias = d = (MAX_BED_POWER) >> 1, bias = d = (PID_MAX) >> 1); wait_for_heatup = true; // Can be interrupted with M108 @@ -324,15 +325,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; updateTemperaturesFromRawValues(); // Get the current temperature and constrain it - current = - #if HAS_PID_FOR_BOTH - hotend < 0 ? current_temperature_bed : current_temperature[hotend] - #elif ENABLED(PIDTEMP) - current_temperature[hotend] - #else - current_temperature_bed - #endif - ; + current = GHV(current_temperature_bed, current_temperature[hotend]); NOLESS(max, current); NOMORE(min, current); @@ -346,16 +339,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; if (heating && current > target) { if (ELAPSED(ms, t2 + 5000UL)) { heating = false; - #if HAS_PID_FOR_BOTH - if (hotend < 0) - soft_pwm_amount_bed = (bias - d) >> 1; - else - soft_pwm_amount[hotend] = (bias - d) >> 1; - #elif ENABLED(PIDTEMP) - soft_pwm_amount[hotend] = (bias - d) >> 1; - #elif ENABLED(PIDTEMPBED) - soft_pwm_amount_bed = (bias - d) >> 1; - #endif + SHV(soft_pwm_amount, (bias - d) >> 1, (bias - d) >> 1); t1 = ms; t_high = t1 - t2; max = target; @@ -368,15 +352,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; t2 = ms; t_low = t2 - t1; if (cycles > 0) { - long max_pow = - #if HAS_PID_FOR_BOTH - hotend < 0 ? MAX_BED_POWER : PID_MAX - #elif ENABLED(PIDTEMP) - PID_MAX - #else - MAX_BED_POWER - #endif - ; + const long max_pow = GHV(MAX_BED_POWER, PID_MAX); bias += (d * (t_high - t_low)) / (t_low + t_high); bias = constrain(bias, 20, max_pow - 20); d = (bias > max_pow >> 1) ? max_pow - 1 - bias : bias; @@ -415,16 +391,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; */ } } - #if HAS_PID_FOR_BOTH - if (hotend < 0) - soft_pwm_amount_bed = (bias + d) >> 1; - else - soft_pwm_amount[hotend] = (bias + d) >> 1; - #elif ENABLED(PIDTEMP) - soft_pwm_amount[hotend] = (bias + d) >> 1; - #else - soft_pwm_amount_bed = (bias + d) >> 1; - #endif + SHV(soft_pwm_amount, (bias + d) >> 1, (bias + d) >> 1); cycles++; min = target; } @@ -453,10 +420,10 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; if ( #if WATCH_THE_BED && WATCH_HOTENDS true - #elif WATCH_THE_BED - hotend < 0 - #else + #elif WATCH_HOTENDS hotend >= 0 + #else + hotend < 0 #endif ) { if (!heated) { // If not yet reached target... @@ -487,7 +454,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; SERIAL_PROTOCOLLNPGM(MSG_PID_AUTOTUNE_FINISHED); #if HAS_PID_FOR_BOTH - const char* estring = hotend < 0 ? "bed" : ""; + const char* estring = GHV("bed", ""); SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kp ", workKp); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Ki ", workKi); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kd ", workKd); SERIAL_EOL(); @@ -575,7 +542,13 @@ int Temperature::getHeaterPower(const int heater) { uint8_t fanDone = 0; for (uint8_t f = 0; f < COUNT(fanPin); f++) { - pin_t pin = pgm_read_byte(&fanPin[f]); + const pin_t pin = + #ifdef ARDUINO + pgm_read_byte(&fanPin[f]) + #else + fanPin[f] + #endif + ; const uint8_t bit = pgm_read_byte(&fanBit[f]); if (pin >= 0 && !TEST(fanDone, bit)) { uint8_t newFanSpeed = TEST(fanState, bit) ? EXTRUDER_AUTO_FAN_SPEED : 0;